☆ 4.7 Article

Self-excited wave stabilization in a linear detonation combustor

COMBUSTION AND FLAME (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Interdisciplinary Applications

Highly-scalable GPU-accelerated compressible reacting flow solver for modeling high-speed flows

Ral Bielawski et al.

Summary: Emerging supercomputing systems combine CPUs and GPUs to reach exascale capabilities with minimal energy footprint. This presents challenges for fluid solvers due to the differences in hardware architecture and operation between GPUs and CPUs. This work presents a general approach for efficient implementation of finite-volume based reacting flow solvers on heterogeneous systems. Specific algorithms are developed to handle compressible reacting flows, including chemical reactions, convection terms, and turbulence, ensuring GPU-based efficiency. The approach is demonstrated using the OpenFOAM software and shows excellent scalability on a large number of GPUs (> 3000) with constant throughput for a large number of control volumes.

COMPUTERS & FLUIDS (2023)

Add to Collection

Article Thermodynamics

Effect of injection dynamics on detonation wave propagation in a linear detonation combustor

Aaron Lemcherfi et al.

Summary: This study investigates the effects of reactant injection and mixing on detonation wave propagation in a self-excited, optically-accessible linear detonation combustor. Measurements of acetone tracer injected into the fuel stream were used to capture the fuel injection and mixing processes. The results provide quantitative information on the fuel injector recovery process and its impact on the detonation wave structure across different equivalence ratios.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2023)

Add to Collection

Article Thermodynamics

Investigation of reflective shuttling detonation cycle by schlieren and chemiluminescence photography

Tomoya Taguchi et al.

Summary: The study shows that a reflective shuttling detention combustor (RSDC) can visualize the entire area of the combustor via optical technique and reproduce the counter-rotating detonation mode in rotating detonation combustors (RDC). Results indicate that the reduction in the reflection wall distance leads to a decrease in detonation propagation speed, and the mixture is primarily burned by deflagration behind the shock wave.

COMBUSTION AND FLAME (2022)

Add to Collection

Article Thermodynamics

Simultaneous 10 0-kHz acetone planar laser-induced fluorescence and OH * chemiluminescence in a linear non-premixed detonation channel

Zachary M. Ayers et al.

Summary: Reactant mixing and combustion processes are investigated using laser-induced fluorescence and chemiluminescence imaging techniques. Real-time imaging provides key fuel injection characteristics and spatiotemporal evolution information of the reactant refill process.

COMBUSTION AND FLAME (2022)

Add to Collection

Article Thermodynamics

Mixing and detonation structure in a rotating detonation engine with an axial air inlet

Takuma Sato et al.

Summary: The study found that the detonation engine has combustion regions ahead of the detonation wavefront, and the injectors recover unstably as the high-pressure flow expands, leading to a mixing process before the next cycle. This resulting flow structure not only promotes mixing between product and reactant gases, but also increases the likelihood of autoignition.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Add to Collection

Article Thermodynamics

Investigation of combustion modes and pressure of reflective shuttling detonation combustor

Masato Yamaguchi et al.

Summary: The study focused on a reflective shuttling detonation combustor, which showed that different fuel flow rates and equivalence ratios could lead to different combustion modes. The pressure ratio of detonation modes was found to be up to 18% lower than that of deflagration modes, potentially due to the flow velocity induced by detonation waves.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Add to Collection

Article Thermodynamics

Stabilization mechanisms of longitudinal pulsations in rotating detonation combustors

Richard Bluemner et al.

Summary: This study investigates the stabilization mechanisms of two longitudinal pulsations in rotating detonation combustors, finding that the two modes are related to the length-to-perimeter ratio and mass flux. The first mode is an acoustic resonance supported by intersections of counter-rotating waves, while the second mode is controlled by the reflection of an explosion induced shock wave propagating through a high velocity bulk flow.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Add to Collection

Article Mechanics

Mass flow rate effect on a rotating detonation combustor with an axial air injection

T. Sato et al.

Summary: By changing the flow rate of reactants injected into a rotating detonation combustor, interesting behavior of the system can be observed. A combination of experiments and numerical simulations shows that increasing mass flow rate can lead to a more uniform fuel-air mixture forming, resulting in a more ideal detonation effect with increased wave velocity.

SHOCK WAVES (2021)

Add to Collection

Article Energy & Fuels

A Neural Network-Inspired Matrix Formulation of Chemical Kinetics for Acceleration on GPUs

Shivam Barwey et al.

Summary: This study explores the use of GPU-accelerated neural networks to speed up high-fidelity simulations of turbulent flames with detailed chemical kinetics. By recasting Arrhenius kinetics as a neural network using matrix-based formulations, GPU-optimized linear algebra libraries can be utilized without the need for training. The performance analysis focuses on the scalability of source term calculations with reaction mechanism complexity, revealing trends in cell number effects on GPU saturation and speedup. The matrix-based method enables highly efficient GPU performance and near-peak performance in saturated regimes.

ENERGIES (2021)

Add to Collection

Article Thermodynamics

The effects of mixture preburning on detonation wave propagation

Supraj Prakash et al.

Summary: Pressure gain combustion through continuous detonations, particularly in rotating detonation engines (RDEs), offers significant efficiency improvements in propulsion and energy conversion devices. However, non-premixed fuel injection in practical RDEs faces challenges such as turbulence-induced shock-front variations and incomplete fuel-air mixing. Preburning was found to weaken shock fronts and lead to delayed combustion of partially-oxidized fuel-air mixtures, contributing to combustion efficiency losses. This parasitic combustion process hinders detonation efficiency by diverting heat release away from the shock wave.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Add to Collection

Article Thermodynamics

Numerical simulation of a methane-oxygen rotating detonation rocket engine

Supraj Prakash et al.

Summary: The rotating detonation engine is an important realization of pressure gain combustion for rocket applications, characterized by a highly unsteady flow field and entrainment of partially-burnt gases post-detonation. Numerical simulations show spatially fluctuating detonation wave strengths and parasitic combustion of fresh reactants in the flow field.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2021)

Add to Collection

Article Engineering, Aerospace

Analysis of the Detonation Wave Structure in a Linearized Rotating Detonation Engine

Supraj Prakash et al.

AIAA JOURNAL (2020)

Add to Collection

Article Engineering, Aerospace

Detonation Structure in Ethylene/Air-Based Non-Premixed Rotating Detonation Engine

Takuma Sato et al.

JOURNAL OF PROPULSION AND POWER (2020)

Add to Collection

Article Thermodynamics

Supersonic combustion induced by reflective shuttling shock wave in fan-shaped two-dimensional combustor

Masato Yamaguchi et al.

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2019)

Add to Collection

Article Thermodynamics

High-speed imaging of wave modes in an RDC

M. D. Bohon et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2019)

Add to Collection

Article Engineering, Aerospace

Three-dimensional numerical study on rotating detonation engines using reactive Navier-Stokes equations

Li-Feng Zhang et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Engineering, Aerospace

Characterization of Rotating Detonation Engine Injector Response Using Laser-Induced Fluorescence

Clinton Bedick et al.

JOURNAL OF PROPULSION AND POWER (2019)

Add to Collection

Article Thermodynamics

A comprehensive modeling procedure for estimating statistical properties of forced ignition

Yihao Tang et al.

COMBUSTION AND FLAME (2019)

Add to Collection

Article Thermodynamics

Self-sustained, high-frequency detonation wave generation in a semi-bounded channel

Kyle Schwinn et al.

COMBUSTION AND FLAME (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A minimally-dissipative low-Mach number solver for complex reacting flows in OpenFOAM

Malik Hassanaly et al.

COMPUTERS & FLUIDS (2018)

Add to Collection

Article Thermodynamics

Chemiluminescence imaging of an optically accessible non-premixed rotating detonation engine

Brent A. Rankin et al.

COMBUSTION AND FLAME (2017)

Add to Collection

Article Thermodynamics

Detonative propulsion

Piotr Wolanski

PROCEEDINGS OF THE COMBUSTION INSTITUTE (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Implementation of semi-discrete, non-staggered central schemes in a colocated, polyhedral, finite volume framework, for high-speed viscous flows

Christopher J. Greenshields et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2010)

Add to Collection

Article Engineering, Aerospace

Continuous spin detonations

Fedor A. Bykovskii et al.

JOURNAL OF PROPULSION AND POWER (2006)

Add to Collection

Article Engineering, Aerospace

Thermodynamic cycle analysis for propagating detonations

E Wintenberger et al.

JOURNAL OF PROPULSION AND POWER (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.