4.7 Article

Impact of the physical properties of contact lens materials on the discomfort: role of the coefficient of friction

Related references

Note: Only part of the references are listed.
Review Nanoscience & Nanotechnology

Biomimetic-Engineered Silicone Hydrogel Contact Lens Materials

Kazuhiko Ishihara et al.

Summary: Contact lenses are a successful application of biomaterials, and the chemical structure of the polymers used in contact lenses is crucial. Different types of contact lenses have been developed based on the chemical structure of polymers, considering factors like mechanical properties, optical properties, and compatibility. Advances in contact lens materials have addressed issues like oxygen permeability and biocompatibility, improving comfort and duration of use. Surface polymer modification has allowed for better long-term use and reuse of contact lenses.

ACS APPLIED BIO MATERIALS (2023)

Article Chemistry, Physical

Influence of Selected Ophthalmic Fluids on the Wettability and Hydration of Hydrogel and Silicone Hydrogel Contact Lenses-In Vitro Study

Gabriela Chwalik-Pilszyk et al.

Summary: This study evaluates the effect of incubation in ophthalmic fluids on different types of contact lenses. The results show significant changes in dehydration and contact angle for lenses incubated in eye drops. Hydrogel lenses have higher surface free energy values. The differences in SFE values caused by different incubation environments are not significant.

MATERIALS (2022)

Article Ophthalmology

Evaluation of daily disposable senofilcon A contact lenses in a symptomatic population

Meredith Jansen Bishop et al.

Summary: A study evaluated the comfort performance of refitting symptomatic contact lens wearers to ACUVUE OASYS (R) 1-Day lenses with HydraLuxeTM technology. The results showed that wearing these lenses significantly improved overall comfort and reduced symptoms of dryness and discomfort.

CONTACT LENS & ANTERIOR EYE (2022)

Article Chemistry, Multidisciplinary

Effects of Sterilization Methods on the Integrity and Functionality of Covalent Mucin Coatings on Medical Devices

Carolin A. Rickert et al.

Summary: Recent advances in biomedical materials have shown that covalent mucin coatings on polymeric materials can greatly enhance the surface properties of medical devices. Sterilization of the coated devices is essential for medical applications, but common methods may compromise the structural integrity of the coatings. Covalent mucin coatings on medical devices show potential to withstand sterilization treatments, with ethylene oxide fumigation being the most promising method. The findings suggest that the beneficial properties of mucin coatings demonstrated in vitro can be transferred to in vivo applications.

ADVANCED MATERIALS INTERFACES (2022)

Article Ophthalmology

Inflammatory proteins associated with contact lens-related dry eye

Padmapriya Ramamoorthy et al.

Summary: This study found that the tear film of individuals with contact lens-related dry eye (CLDE) contains increased levels of several inflammatory mediators. These results support the potential role of inflammation in CLDE.

CONTACT LENS & ANTERIOR EYE (2022)

Article Chemistry, Physical

Dewetting characteristics of contact lenses coated with wetting agents

V. Chandran Suja et al.

Summary: By studying the mechanisms of wetting agents on tear film stability, we found that zwitterionic wetting agents can effectively stabilize the tear film, and adjusting the surface concentration and mixture ratio of wetting agents can enhance their wetting characteristics. Furthermore, we confirmed the significance of minimizing the contact angle and contact angle hysteresis for wetting performance.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Review Ophthalmology

All soft contact lenses are not created equal

Nathan Efron et al.

Summary: This article discusses the implications of inappropriately substituting different types of soft contact lenses, including lens properties and usage, as well as potential patient dissatisfaction and adverse events. It emphasizes that contact lenses are medical devices that require prescription and fitting, and different lens types have differences, so substitution may lead to undesirable consequences.

CONTACT LENS & ANTERIOR EYE (2022)

Review Ophthalmology

Tribology and the Ocular Surface

Chris W. Lievens et al.

Summary: This article discusses the application of tribology in the field of ophthalmology, particularly in dry eye disease and contact lens discomfort. Research findings suggest that the lubricating tear film plays a crucial role in reducing friction between the eyelid and the eyeball and altering the Stribeck curve. Changes to the tear film or the introduction of contact lenses may increase friction and lead to patient symptoms.

CLINICAL OPHTHALMOLOGY (2022)

Article Ophthalmology

Wear Experience of a Water Surface Daily Disposable Contact Lens in Existing Silicone Hydrogel Planned Replacement Lens Wearers

Ryan Rutschilling et al.

Summary: The purpose of this study is to evaluate the wear experience of satisfied planned replacement silicone hydrogel wearers when refit into a silicone hydrogel daily disposable lens. The findings suggest that providers can successfully refit satisfied wearers of early generation silicone hydrogel planned replacement lenses into a new generation silicone hydrogel daily disposable lens while maintaining satisfaction.

CLINICAL OPTOMETRY (2022)

Article Ophthalmology

Short- and Long-Term Effects of a Multi-Component, Artificial Tear on Preocular Tear Film Stability, Tear Evaporation and Tear Film Optical Dynamic: A Prospective Randomized Double-Phase Study

Giancarlo Montani et al.

Summary: This study evaluated the short- and long-term effects of an artificial tear containing carbomer, hyaluronic acid, glycerol, and medium-chain triglycerides in patients with mild-to-moderate dry eye symptoms. The results showed that the tear film stability was increased, tear evaporation was reduced, and symptoms were alleviated with the use of the tested product in both short- and long-term observations.

CURRENT EYE RESEARCH (2022)

Article Chemistry, Physical

Tear Film Stability as a Function of Tunable Mucin Concentration Attached to Supported Lipid Bilayers

Kiara W. Cui et al.

Summary: This work develops a tunable in vitro model of the mucin layer of the human tear film. The model involves supported lipid bilayers and biotinylated bovine submaxillary mucins tethered onto the bilayers. The model can be used with interferometry to monitor film thickness and investigate tear film breakup. Higher mucin coverage in the model leads to delayed breakup times, potentially due to a thicker hydrated layer that protects film stability.

JOURNAL OF PHYSICAL CHEMISTRY B (2022)

Article Chemistry, Multidisciplinary

Sustained Release of a Polymeric Wetting Agent from a Silicone-Hydrogel Contact Lens Material

Ying Zheng et al.

Summary: This study investigates the uptake and release kinetics of a dilute aqueous polymeric-surfactant wetting agent in a newly designed silicone-hydrogel lens material. The results show that the diffusion coefficient of the wetting agent is significantly smaller than that of the free surfactant in bulk water, and the majority of the loaded amount is irreversibly bound in the lens matrix. The release of the wetting agent is more hydrophilic and polar, indicating the suitability of using this nonionic polymeric surfactant to enhance lens wettability over time.

ACS OMEGA (2022)

Article Ophthalmology

Lipid deposition on contact lenses in symptomatic and asymptomatic contact lens wearers

Negar Babaei Omali et al.

Summary: Lipid deposition was significantly higher in the asymptomatic group compared to symptomatic wearers. Cholesteryl ester deposition was found to be the highest among all lipid types. Although the measured lipid levels are considered low for clinical deposition, they may impact other clinical outcomes such as comfort.

CONTACT LENS & ANTERIOR EYE (2021)

Article Ophthalmology

Impact of a low molecular weight hyaluronic acid derivative on contact lens wettability

Katsuhide Yamasaki et al.

Summary: The study found that the low molecular weight hyaluronic acid derivative was more readily absorbed by silicone hydrogel contact lenses and accumulated more over time compared to conventional hyaluronic acid. Multipurpose solutions containing the derivative increased lens hydrophilicity by decreasing contact angles, with this effect maintained over multiple cycles.

CONTACT LENS & ANTERIOR EYE (2021)

Article Ophthalmology

Effect of large diameter and plasma coating on the initial adaptation of gas permeable contact lens fitting for neophytes

Dutta Debarun et al.

Summary: The study results indicate that changing GP diameter or surface lubricity did not help accelerate adaptation in healthy neophytes. Comfort improved and bulbar redness reduced with time in both cohorts.

CONTACT LENS & ANTERIOR EYE (2021)

Article Ophthalmology

Temporal considerations in contact lens discomfort

Eric B. Papas et al.

Summary: The study found that the discomfort during contact lens wear is associated with the length of time the lenses are worn, but not with the time of day when the lenses are placed on-eye. It also emphasized the importance of active monitoring of participant compliance in studies involving time critical responses.

CONTACT LENS & ANTERIOR EYE (2021)

Article Engineering, Mechanical

Study of the frictional behavior of soft contact lenses by an innovative method

A. L. Carvalho et al.

Summary: The aim of this research is to study the tribological behavior of different soft contact lenses under different contact conditions using a self-developed tribometer. This technique has proven to be sensitive to biologically relevant conditions such as light normal load, high speed, and hydrodynamic lubrication.

TRIBOLOGY INTERNATIONAL (2021)

Review Chemistry, Multidisciplinary

Laser Fabrication of Bioinspired Gradient Surfaces for Wettability Applications

Junrui Wu et al.

Summary: Laser processing is a substrate-independent, facile, efficient, and pattern-diverse technique for preparing gradient surfaces. Gradient surfaces fabricated by laser processing have wide applications and challenges in wettability applications.

ADVANCED MATERIALS INTERFACES (2021)

Article Chemistry, Physical

Photo-polymerized and thermal-polymerized silicon hydrogels with different surface microstructure and wettability

Ying-Ying Wei et al.

Summary: This study found that there is a significant difference in surface wettability between silicone hydrogels prepared by thermal and photo-initiation, which can be explained by the distinct surface morphologies.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Article Biophysics

Surface characterization of a silicone hydrogel contact lens having bioinspired 2-methacryloyloxyethyl phosphorylcholine polymer layer in hydrated state

Xinfeng Shi et al.

Summary: A silicone hydrogel contact lens material with unique chemical and physical structure was enhanced through surface modification using a bioinspired MPC polymer, resulting in improved surface characteristics such as hydrophilicity and lubricity. The hydrated MPC polymer layer on the surface led to softer surface properties and reduced friction, which are expected to contribute to excellent ocular performance.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

Article Chemistry, Multidisciplinary

Nanoscaled Morphology and Mechanical Properties of a Biomimetic Polymer Surface on a Silicone Hydrogel Contact Lens

Xinfeng Shi et al.

Summary: The study modified the surface of a silicone hydrogel contact lens with a biomimetic phospholipid polymer to mimic the natural corneal tissue, resulting in nanoscaled concavities and convexities on the surface. The mechanical properties of the surface were found to be similar to natural tissues, and the material remained intact after 30 days of clinical use. These results demonstrate the validity of material preparation by biomimetic methods and suggest potential for development of human-friendly medical devices.

LANGMUIR (2021)

Article Engineering, Biomedical

Contact lenses coated with hybrid multifunctional ternary nanocoatings (Phytomolecule-coated ZnO nanoparticles:Gallic Acid:Tobramycin) for the treatment of bacterial and fungal keratitis

Shakeel Ahmad Khan et al.

Summary: Contact lenses are widely used for visual corrections, but may cause discomfort and infections. The development of multifunctional contact lenses coated with gallic acid, zinc oxide nanoparticles, and tobramycin using sonochemical technique showed significant antibacterial, antifungal, and antioxidant properties, along with good cytocompatibility and antifouling ability.

ACTA BIOMATERIALIA (2021)

Article Ophthalmology

CLEAR-Scleral lenses

Melissa Barnett et al.

Summary: The report provides a historical review and detailed account of the contemporary use of scleral lenses, highlighting them as the optimal choice for contact lens wear across various clinical indications and potentially delaying the need for corneal surgery. It also discusses the challenges and future applications associated with modern scleral lens fitting and evaluation processes.

CONTACT LENS & ANTERIOR EYE (2021)

Article Ophthalmology

CLEAR-Contact lens complications

Fiona Stapleton et al.

Summary: Contact lens-related complications are common and can affect wearers in various ways, including corneal infection, inflammation, metabolic conditions, mechanical issues, toxic and allergic disorders, tear resurfacing disorders/dry eye, and discomfort. It is important to understand the classification, epidemiology, pathophysiology, management, and prevention of these complications in order to optimize contact lens wear and address any related issues effectively.

CONTACT LENS & ANTERIOR EYE (2021)

Article Ophthalmology

CLEAR-Contact lens wettability, cleaning, disinfection and interactions with tears

Mark Willcox et al.

Summary: Contact lens materials have undergone significant changes in the past 20 years with the introduction of silicone hydrogel materials. However, research is still needed to improve comfort, as the association between contact lens wettability and comfort is not clear. The interactions between lens materials, tear film, and disinfection solution play an important role in biocompatibility, but whether this can be altered to improve comfort remains debatable.

CONTACT LENS & ANTERIOR EYE (2021)

Review Ophthalmology

Could contact lens dryness discomfort symptoms sometimes have a neuropathic basis?

Charles W. McMonnies

Summary: Symptoms of dry discomfort in soft contact lens wearers can be exacerbated by tear dysfunction and lens-induced challenges to tear homeostasis, potentially leading to corneal nerve disturbances. Lid wiper neuropathy may also play a role in some cases of contact lens intolerance. Post-lens tear pool stagnation with increased concentrations of inflammatory mediators could contribute to corneal neuropathy, particularly when discomfort develops after successful wear. Esthesiometry and confocal microscopy may help diagnose contact lens-related corneal neuralgia in discontinued wearers.

EYE AND VISION (2021)

Article Polymer Science

Albumin Acts as a Lubricant on the Surface of Hydrogel and Silicone Hydrogel Contact Lenses

Chen-Ying Su et al.

Summary: The study analyzed how tear albumin affects the friction coefficient of contact lenses, concluding that albumin provided lubrication for silicone hydrogel lenses regardless of concentration, while it acted as a lubricant for hydrogel lenses only at normal concentration. The results did not correspond to albumin deposition amount or surface roughness, but a proposed model explained how albumin might act as a lubricant on the surface of some contact lenses.

POLYMERS (2021)

Article Nanoscience & Nanotechnology

Surface Fluorination Modification and Anti-Biofouling Study of a pHEMA Hydrogel

Xinlin Yang et al.

Summary: In this study, a pHEMA hydrogel film was successfully modified with a fluorinated layer to improve its anti-biofouling properties. The modified pHEMA showed increased water contact angle and decreased surface energy, leading to significantly reduced protein and bacterial adhesion. The in vitro cytotoxicity assessment demonstrated that the modified pHEMA was noncytotoxic, highlighting the effectiveness of fluorinated surface modification in establishing a hydrophobic and anti-biofouling surface.

ACS APPLIED BIO MATERIALS (2021)

Article Engineering, Biomedical

Relationships between the material properties of silicone hydrogels: Desiccation, wettability and lubricity

Petar Borisov Eftimov et al.

Summary: Silicone hydrogels (SiHy) are composite matrices designed for contact lenses, with their properties such as hydration, wettability, and lubricity needing to be optimized for use on the ocular surface. Different SiHy materials show varying performances under desiccation/rehydration cycling, with wetting agents incorporated ones being more susceptible to extended drying. There is a strong correlation between the wettability and lubricity of SiHy after at least 4 hours of blink-like cycling, providing insights for the design of novel ophthalmic materials.

JOURNAL OF BIOMATERIALS APPLICATIONS (2021)

Article Physics, Fluids & Plasmas

Tear-film breakup: The role of membrane-associated mucin polymers

Anjishnu Choudhury et al.

Summary: This study aims to elucidate the hydrodynamic mechanisms by which the loss of membrane-associated mucins causes premature tear-film rupture, demonstrating a strong effect of the elevated van der Waals attraction on precipitating tear-film breakup. The change in boundary condition on the cornea has a relatively minor role in comparison.

PHYSICAL REVIEW E (2021)

Article Ophthalmology

Effects of lysosomal deposition on the friction coefficient of hydrogel contact lenses

Chen-Ying Su et al.

CONTACT LENS & ANTERIOR EYE (2020)

Article Polymer Science

Chitosan surface modified hydrogel as a therapeutic contact lens

Mohammad Kazemi Ashtiani et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2020)

Article Nanoscience & Nanotechnology

Hydrophilic/Hydrophobic Heterogeneity Anti-Biofouling Hydrogels with Well-Regulated Rehydration

Xin Su et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Highly Transparent Covalent Mucin Coatings Improve the Wettability and Tribology of Hydrophobic Contact Lenses

Carolin A. Rickert et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Biophysics

Novel anti-biofouling and drug releasing materials for contact lenses

Hiroaki Ogawa et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2020)

Article Ophthalmology

Overnight orthokeratology

Mark A. Bullimore et al.

CONTACT LENS & ANTERIOR EYE (2020)

Review Engineering, Biomedical

Evaluation of commercial soft contact lenses for ocular drug delivery: A review

Xin Fan et al.

ACTA BIOMATERIALIA (2020)

Review Ophthalmology

Giant papillary conjunctivitis: A review

Sarah E. Kenny et al.

OCULAR SURFACE (2020)

Review Chemistry, Multidisciplinary

Advances in chemistry and composition of soft materials for drug releasing contact lenses

Subir Chatterjee et al.

RSC ADVANCES (2020)

Article Ophthalmology

Tear Film Characteristics During Wear of Daily Disposable Contact Lenses

Giancarlo Montani et al.

CLINICAL OPHTHALMOLOGY (2020)

Review Ophthalmology

A Review of Contact Lens Dropout

Andrew D. Pucker et al.

CLINICAL OPTOMETRY (2020)

Article Ophthalmology

Pre-contact lens and pre-corneal tear film kinetics

Michel Guillon et al.

CONTACT LENS & ANTERIOR EYE (2019)

Article Biophysics

The influence of protein deposition on contact lens tear film stability

Noelle I. Rabiah et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2019)

Article Chemistry, Physical

Improving wettability and lubricity of commercial contact lenses by polymerizing a thin film of dimethylacryamide

Yifan Yu et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)

Review Biochemistry & Molecular Biology

Contribution of Mucins towards the Physical Properties of the Tear Film: A Modern Update

Georgi As. Georgiev et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)

Review Chemistry, Physical

Contact Lens Materials: A Materials Science Perspective

Christopher Stephen Andrew Musgrave et al.

MATERIALS (2019)

Article Ophthalmology

Satisfaction of astigmatic patients with toric nesofilcon A contact lenses

Jill Saxon et al.

CLINICAL OPTOMETRY (2019)

Review Chemistry, Physical

Controlled Surface Wettability by Plasma Polymer Surface Modification

Muzammil Iqbal et al.

SURFACES (2019)

Article Ophthalmology

Effects of Corneal Scars and Their Treatment With Rigid Contact Lenses on Quality of Vision

Bram de Jong et al.

EYE & CONTACT LENS-SCIENCE AND CLINICAL PRACTICE (2018)

Article Ophthalmology

Comparison of the Lubricity and Surface Roughness of 5 Cosmetic Contact Lenses

Charis Lau et al.

EYE & CONTACT LENS-SCIENCE AND CLINICAL PRACTICE (2018)

Article Polymer Science

Surface modification of poly(2-hydroxyethyl methacrylate) hydrogel for contact lens application

Mohammad Kazemi Ashtiani et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2018)

Article Engineering, Chemical

Friction-Induced Inflammation

Angela A. Pitenis et al.

TRIBOLOGY LETTERS (2018)

Article Ophthalmology

Effect of contact lens surface properties on comfort, tear stability and ocular physiology

Maria Vidal-Rohr et al.

CONTACT LENS & ANTERIOR EYE (2018)

Article Ophthalmology

Relationship Between Eyelid Pressure and Ocular Surface Disorders in Patients With Healthy and Dry Eyes

Masahiko Yamaguchi et al.

INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE (2018)

Review Ophthalmology

Relevance of Lipid-Based Products in the Management of Dry Eye Disease

Jean-Sebastien Garrigue et al.

JOURNAL OF OCULAR PHARMACOLOGY AND THERAPEUTICS (2017)

Article Polymer Science

Biopolymer brushes grown on PDMS contact lenses by in situ atmospheric plasma-induced polymerization

Jung-San Chen et al.

JOURNAL OF POLYMER RESEARCH (2017)

Review Chemistry, Multidisciplinary

Metal-phenolic networks as a versatile platform to engineer nanomaterials and biointerfaces

Hirotaka Ejima et al.

NANO TODAY (2017)

Article Chemistry, Multidisciplinary

Mucin Coatings Prevent Tissue Damage at the Cornea-Contact Lens Interface

Benjamin Winkeljann et al.

ADVANCED MATERIALS INTERFACES (2017)

Article Nanoscience & Nanotechnology

Reducing Friction in the Eye: A Comparative Study of Lubrication by Surface-Anchored Synthetic and Natural Ocular Mucin Analogues

Olof Sterner et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Review Biochemistry & Molecular Biology

Tear film lipid layer: A molecular level view

Lukasz Cwiklik

BIOCHIMICA ET BIOPHYSICA ACTA-BIOMEMBRANES (2016)

Article Ophthalmology

Lid wiper epitheliopathy

Nathan Efron et al.

PROGRESS IN RETINAL AND EYE RESEARCH (2016)

Article Ophthalmology

Friction Measurements on Contact Lenses in a Physiologically Relevant Environment: Effect of Testing Conditions on Friction

Olof Sterner et al.

INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE (2016)

Article Chemistry, Physical

Incorporation of polymerizable surfactants in hydroxyethyl methacrylate lenses for improving wettability and lubricity

Lokendrakumar C. Bengani et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)

Article Ophthalmology

Spontaneous Blinking from a Tribological Viewpoint

Heiko Pult et al.

Ocular Surface (2015)

Review Ophthalmology

Biological and Clinical Implications of Lysozyme Deposition on Soft Contact Lenses

Negar Babaei Omali et al.

OPTOMETRY AND VISION SCIENCE (2015)

Article Engineering, Mechanical

In vitro friction testing of contact lenses and human ocular tissues: Effect of proteoglycan 4 (PRG4)

M. Samsom et al.

TRIBOLOGY INTERNATIONAL (2015)

Article Multidisciplinary Sciences

Quercetin Attenuates Lactate Production and Extracellular Matrix Secretion in Keratoconus

T. B. Mckay et al.

SCIENTIFIC REPORTS (2015)

Article Engineering, Biomedical

Poly(ethylene glycol)-or silicone-modified hyaluronan for contact lens wetting agent applications

Stefan M. Paterson et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2015)

Article Chemistry, Multidisciplinary

Engineering Multifunctional Capsules through the Assembly of Metal-Phenolic Networks

Junling Guo et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

Article Chemistry, Physical

Friction of hydrogels with controlled surface roughness on solid flat substrates

Shintaro Yashima et al.

SOFT MATTER (2014)

Article Ophthalmology

The Impact of Contemporary Contact Lenses on Contact Lens Discontinuation

Kathy Dumbleton et al.

EYE & CONTACT LENS-SCIENCE AND CLINICAL PRACTICE (2013)

Review Ophthalmology

Microbial Adhesion to Silicone Hydrogel Lenses: A Review

Mark D. P. Willcox

EYE & CONTACT LENS-SCIENCE AND CLINICAL PRACTICE (2013)

Article Ophthalmology

Protein Deposition and Its Effect on Bacterial Adhesion to Contact Lenses

Negar Babaei Omali et al.

OPTOMETRY AND VISION SCIENCE (2013)

Article Engineering, Mechanical

Lubrication regimes in contact lens wear during a blink

Alison C. Dunn et al.

TRIBOLOGY INTERNATIONAL (2013)

Article Engineering, Chemical

Lubricity of Surface Hydrogel Layers

Alison C. Dunn et al.

TRIBOLOGY LETTERS (2013)

Review Ophthalmology

Daily disposable lenses: The better alternative

P. Cho et al.

CONTACT LENS & ANTERIOR EYE (2013)

Article Ophthalmology

Relationship between contact lens coefficient of friction and subjective lens comfort

Jami Kern et al.

Contact Lens & Anterior Eye (2013)

Article Ophthalmology

Supportive data linking coefficient of friction and comfort

Noel A. Brennan et al.

Contact Lens & Anterior Eye (2013)

Article Ophthalmology

Effect of lipid-based eyedrops on silicone hydrogel contact lens wear subjective acceptance

Michel Guillon et al.

Contact Lens & Anterior Eye (2013)

Article Biochemical Research Methods

Oxygen and nitrogen plasma hydrophilization and hydrophobic recovery of polymers

Ville Jokinen et al.

BIOMICROFLUIDICS (2012)

Article Ophthalmology

Estimating Tear Film Spread and Stability Through Tear Hydrodynamics

Jalaiah Varikooty et al.

OPTOMETRY AND VISION SCIENCE (2012)

Review Ophthalmology

Function of lipids - their fate in contact lens wear: An interpretive review

Amandeep Panaser et al.

CONTACT LENS & ANTERIOR EYE (2012)

Article Engineering, Biomedical

A study of the frictional properties of senofilcon-A contact lenses

Bo Zhou et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2011)

Article Ophthalmology

Influence of Protein Deposition on Bacterial Adhesion to Contact Lenses

Lakshman N. Subbaraman et al.

OPTOMETRY AND VISION SCIENCE (2011)

Article Engineering, Chemical

Friction Measurements on Contact Lenses in Their Operating Environment

M. Roba et al.

TRIBOLOGY LETTERS (2011)

Article Engineering, Mechanical

The relationship between friction and wettability in aqueous environment

Z. Pawlak et al.

Article Ophthalmology

Contact Lens Wear Affects Tear Film Evaporation

Michel Guillon et al.

EYE & CONTACT LENS-SCIENCE AND CLINICAL PRACTICE (2008)

Article Ophthalmology

Bacterial adhesion to worn silicone hydrogel contact lenses

Livia Santos et al.

OPTOMETRY AND VISION SCIENCE (2008)

Article Nanoscience & Nanotechnology

Hydrophilicity modification of poly(methyl methacrylate) by excimer laser ablation and irradiation

Heng Qi et al.

MICROFLUIDICS AND NANOFLUIDICS (2008)

Article Chemistry, Physical

Friction and lubrication of hydrogels - its richness and complexity

Jian Ping Gong

SOFT MATTER (2006)

Article Chemistry, Analytical

Decreased mucin concentrations in tear fluids of contact lens wearers

S Yasueda et al.

JOURNAL OF PHARMACEUTICAL AND BIOMEDICAL ANALYSIS (2005)

Article Chemistry, Multidisciplinary

Interpretation of protein adsorption: Surface-induced conformational changes

P Roach et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2005)

Article Engineering, Chemical

Friction coefficient of soft contact lenses: measurements and modeling

AC Rennie et al.

TRIBOLOGY LETTERS (2005)

Review Ophthalmology

Functional aspects of the tear film lipid layer

AJ Bron et al.

EXPERIMENTAL EYE RESEARCH (2004)

Article Engineering, Mechanical

Molecular basis of lubrication

SM Hsu

TRIBOLOGY INTERNATIONAL (2004)