☆ 4.8 Article

On the Active Components in Crystalline Li-Nb-O and Li-Ta-O Coatings from First Principles

CHEMISTRY OF MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Ionic conductivity of Li3TaO4 depending on polymorphism and non-stoichiometric defects

Chaeeun Kim et al.

Summary: The ionic conductivity of complex rock-salt Li3TaO4 was studied by modifying the low-temperature and high-temperature polymorphs with Li/Ta non-stoichiometry. The results showed that the disordered low-temperature phase had higher ionic conductivity than the ordered high-temperature phase, and the Li/Ta non-stoichiometry contributed to an increase in the ionic conductivity of Li3TaO4.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Strategies for fitting accurate machine-learned inter-atomic potentials for solid electrolytes

Juefan Wang et al.

Summary: Ion transport in materials plays an important role, but the variability in reported experimental results introduces challenges for accurate prediction. Machine-learned potentials have the potential to overcome these challenges, but their capabilities need to be critically assessed. This study evaluates the quality of a machine-learning potential based on the moment tensor potential formulation for ion transport in materials, highlighting the importance of high-quality training sets and considering intrinsic defects in solid electrolytes. The limitations posed by short-time and high-temperature simulations for predicting room-temperature properties are also demonstrated.

MATERIALS FUTURES (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Surface Stabilization of Ni-Rich Layered Cathode Materials via Surface Engineering with LiTaO3 for Lithium-Ion Batteries

Hyo Bin Lee et al.

Summary: Ni-rich layered cathode materials have become popular for lithium-ion batteries. Coating the surface of these materials with piezoelectric LiTaO3 enhances charge transfer reactions and surface structural integrity, improving the reversibility and mechanical strength of the cathode materials. This approach also enhances rate capability at high current densities and provides practical insights for the development of Ni-rich cathode materials for electric vehicle applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Electrochemical Characterization and Microstructure Evolution of Ni-Rich Layered Cathode Materials by Niobium Coating/Substitution

Fengxia Xin et al.

Summary: In this study, Nb-coated/substituted LiNi0.9Co0.05Mn0.05O2 (NMC 9055) materials were synthesized, and the addition of niobium improved the capacity retention and charge/discharge voltage profiles. The added niobium was located in the boundaries between the primary particles, transforming interparticles/intraparticles cracking into tiny intraparticles cracking, thus enhancing the electrochemical performance of NMC 9055.

CHEMISTRY OF MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Designing Cathodes and Cathode Active Materials for Solid-State Batteries

Philip Minnmann et al.

Summary: Solid-state batteries are gaining attention as a potentially safe electrochemical high-energy storage concept. However, there are still challenges in designing cathode active materials that are compatible with superionic solid electrolytes. This perspective provides an overview of the required properties and challenges of inorganic cathode active materials used in solid-state batteries, and proposes guidelines for future development.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Synthesis, thermal analysis, and band gap of ordered and disordered complex rock salt Li3TaO4

Chaeeun Kim et al.

Summary: The temperature ranges for phase stability were studied for the disordered and ordered polymorphs of complex rock salt Li3TaO4. The disordered Li3TaO4 can be obtained by heating a mixture of Li2CO3 and Ta2O5, but it transforms irreversibly to the ordered and monoclinic ll-Li(3)TaO(4 ) at high temperatures. The thermal stability of ll-Li3TaO4 is heavily dependent on the sealing of the container.

JOURNAL OF SOLID STATE CHEMISTRY (2022)

Add to Collection

Article Electrochemistry

Study on the formation, development and coating mechanism of new phases on interface in LiNbO3-coated LiCoO2

Guozhong Lu et al.

Summary: The study indicates that the formation of new coating layers in cathode material for Li-ion batteries can significantly improve electrochemical performances. The LiNbO3/Li3NbO4/Co3O4 coating layer obtained at 650 degrees Celsius exhibits the most excellent cycle stability, thanks to the thorough study of coated materials.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

LiNbO3-coated LiNi0.7Co0.1Mn0.2O2 and chlorine-rich argyrodite enabling high-performance solid-state batteries under different temperatures

Linfeng Peng et al.

Summary: The study investigates the enhancement of solid-state battery performance by surface modification of high-voltage cathodes using LiNbO3 coating. The LNO@NCM712 electrode shows improved cyclic performance and lower resistance changes at different rates and temperatures, providing insight into the influence of modification layers on SSB performance and guidance for cathode modification design strategy.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

What is the Role of Nb in Nickel-Rich Layered Oxide Cathodes for Lithium-Ion Batteries?

Fengxia Xin et al.

Summary: Coating and substitution are effective methods to address the capacity loss and stability challenges of nickel-rich layered metal oxide materials in lithium-ion batteries for electric vehicles. This study demonstrates that Li-free Nb oxide treatment can reduce surface impurities, improve rate performance, and stabilize the structure. Nb substitution leads to better long cycling stability with a high capacity retention after 250 cycles.

ACS ENERGY LETTERS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Comparison of LiTaO3 and LiNbO3 Surface Layers Prepared by Post-and Precursor-Based Coating Methods for Ni-Rich Cathodes of All-Solid-State Batteries

Jun Su Lee et al.

Summary: Surface coating is essential for stabilizing the cathode/sulfide interface in all-solid-state batteries, with LiTaO3 and LiNbO3 being popular coating materials. Different coating methods, such as postcoating and precursor-based (PB) coating, have varying effects on the cathode performance. The PB coating method, which offers additional doping effects, shows superior rate capability and cyclic performance in comparison to the postcoating method.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Devil is in the Defects: Electronic Conductivity in Solid Electrolytes

Prashun Gorai et al.

Summary: This study reveals the origins of electronic conductivity in solid electrolytes, predicting the electronic conductivity in three topical solid electrolytes and suggesting general defect engineering strategies to reduce conductivity and degradation mechanism. The methodology presented here provides a quantitative measure of native defects in solid electrolytes, crucial for understanding the effects of defects on ionic conductivity.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Conditioning the Surface and Bulk of High-Nickel Cathodes with a Nb Coating: An In Situ X-ray Study

Fengxia Xin et al.

Summary: Surface coating with niobium has been shown to stabilize high-nickel transition metal layered cathodes in lithium-ion batteries, with the electrochemical performance of the final products depending on postprocessing. In this study, in situ synchrotron X-ray diffraction was used to investigate the kinetic processes and structural evolution in Nb-coated cathodes upon heat treatment. The findings highlight new opportunities for controlling the structure and surface properties of high-nickel cathodes through surface coating combined with postprocessing.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Add to Collection

Review Chemistry, Physical

Toward High Performance All-Solid-State Lithium Batteries with High-Voltage Cathode Materials: Design Strategies for Solid Electrolytes, Cathode Interfaces, and Composite Electrodes

Liansheng Li et al.

Summary: All-solid-state lithium batteries with nonflammable solid electrolytes offer enhanced safety and high energy density, making them the most promising next-generation batteries. Despite significant progress in high-voltage ASSLBs research, there are still challenges to overcome. Summarizing recent research progress can facilitate further development in the field.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Performance and Cost Assessment of Machine Learning Interatomic Potentials

Yunxing Zuo et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Passivation of the Cathode-Electrolyte Interface for 5 V-Class All-Solid-State Batteries

Gaozhan Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Bifunctional Surface Coating of LiNbO3 on High-Ni Layered Cathode Materials for Lithium-Ion Batteries

Jong Hwa Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Accurate and Numerically Efficient r(2)SCAN Meta-Generalized Gradient Approximation

James W. Furness et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

On the Functionality of Coatings for Cathode Active Materials in Thiophosphate-Based All-Solid-State Batteries

Sean P. Culver et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Ionic Transport in Potential Coating Materials for Mg Batteries

Tina Chen et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Fundamentals of inorganic solid-state electrolytes for batteries

Theodosios Famprikis et al.

NATURE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Elucidating Reversible Electrochemical Redox of Li6PS5CI Solid Electrolyte

Darren H. S. Tan et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Accelerating high-throughput searches for new alloys with active learning of interatomic potentials

Konstantin Gubaev et al.

COMPUTATIONAL MATERIALS SCIENCE (2019)

Add to Collection

Article Multidisciplinary Sciences

Defects, Lithium Mobility and Tetravalent Dopants in the Li3NbO4 Cathode Material

Navaratnarajah Kuganathan et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Article Chemistry, Physical

Computational Screening of Cathode Coatings for Solid-State Batteries

Yihan Xiao et al.

JOULE (2019)

Add to Collection

Article Physics, Applied

Study of materials structure physics of isomorphic LiNbO3 and LiTaO3 ferroelectrics by synchrotron radiation X-ray diffraction

Zhi-Gang Zhang et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2018)

Add to Collection

Article Chemistry, Physical

(Electro)chemical expansion during cycling: monitoring the pressure changes in operating solid-state lithium batteries

Wenbo Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Chemistry, Physical

Role of Point Defects in Spinel Mg Chalcogenide Conductors

Pieremanuele Canepa et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

The Li3RuyNb1-yO4 (O ≤ y ≤ 1) System: Structural Diversity and Li Insertion and Extraction Capabilities

Quentin Jacquet et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

First principles study on electrochemical and chemical stability of solid electrolyte-electrode interfaces in all-solid-state Li-ion batteries

Yizhou Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Origin of Outstanding Stability in the Lithium Solid Electrolyte Materials: Insights from Thermodynamic Analyses Based on First-Principles Calculations

Yizhou Zhu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Defect complexes in congruent LiNbO3 and their optical signatures

Yanlu Li et al.

PHYSICAL REVIEW B (2015)

Add to Collection

Article Multidisciplinary Sciences

High-capacity electrode materials for rechargeable lithium batteries: Li3NbO4-based system with cation-disordered rocksalt structure

Naoaki Yabuuchi et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Surface and Interface Engineering of Electrode Materials for Lithium-Ion Batteries

Kai-Xue Wang et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Effects on electrochemical performances for host material caused by structure change of modifying material

Yantao Zhang et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Article Chemistry, Physical

Lithium diffusion in congruent LiNbO3 single crystals at low temperatures probed by neutron reflectometry

E. Hueger et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis

Shyue Ping Ong et al.

COMPUTATIONAL MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Comparison of Li+ conductivity in Li3-xNb1-xMxO4 (M = W, Mo) with that in Li3-2xNixNbO4

Youhao Liao et al.

MATERIALS RESEARCH BULLETIN (2013)

Add to Collection

Article Chemistry, Physical

Li self-diffusion in lithium niobate single crystals at low temperatures

J. Rahn et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2012)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Disordered lithium niobate rock-salt materials prepared by hydrothermal synthesis

Deena R. Modeshia et al.

DALTON TRANSACTIONS (2010)

Add to Collection

Article Optics

Preparation and luminescent characteristic of Li3NbO4 nanophosphor

Yu-Jen Hsiao et al.

JOURNAL OF LUMINESCENCE (2010)

Add to Collection

Article Chemistry, Physical

Role of surface coating on cathode materials for lithium-ion batteries

Zonghai Chen et al.

JOURNAL OF MATERIALS CHEMISTRY (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Comparison of Aqueous and Non-aqueous Soft-Chemical Syntheses of Lithium Niobate and Lithium Tantalate Powders

May Nyman et al.

CRYSTAL GROWTH & DESIGN (2009)

Add to Collection

Article Chemistry, Physical

Optimization methods for finding minimum energy paths

Daniel Sheppard et al.

JOURNAL OF CHEMICAL PHYSICS (2008)

Add to Collection

Article Chemistry, Physical

Tuning the Li diffusivity of poor ionic conductors by mechanical treatment:: High Li conductivity of strongly defective LiTaO3 nanoparticles

M. Wilkening et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Stability of intrinsic defects and defect clusters in LiNbO3 from density functional theory calculations

Haixuan Xu et al.

PHYSICAL REVIEW B (2008)

Add to Collection

Article Electrochemistry

LiNbO3-coated LiCoO2 as cathode material for all solid-state lithium secondary batteries

Narumi Ohta et al.

ELECTROCHEMISTRY COMMUNICATIONS (2007)

Add to Collection

Article Chemistry, Physical

NMR and impedance studies of nanocrystalline and amorphous ion conductors: lithium niobate as a model system

Paul Heitjans et al.

FARADAY DISCUSSIONS (2007)

Add to Collection

Article Chemistry, Physical

From bond valence maps to energy landscapes for mobile ions in ion-conducting solids

Stefan Adams

SOLID STATE IONICS (2006)

Add to Collection

Article Crystallography

Reinvestigation of β-Li3TaO4

D du Boulay et al.

ACTA CRYSTALLOGRAPHICA SECTION E-STRUCTURE REPORTS ONLINE (2003)

Add to Collection

Article Chemistry, Multidisciplinary

Relationship between bond valence and bond softness of alkali halides and chalcogenides

S Adams

ACTA CRYSTALLOGRAPHICA SECTION B-STRUCTURAL SCIENCE CRYSTAL ENGINEERING AND MATERIALS (2001)

Add to Collection

Article Chemistry, Physical

A review of cation-ordered rock salt superstructure oxides

GC Mather et al.

JOURNAL OF MATERIALS CHEMISTRY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.