☆ 4.6 Article

Pipe rheology of wet aqueous application foams

CHEMICAL ENGINEERING SCIENCE (2024)

Related references

Note: Only part of the references are listed.

Article Materials Science, Paper & Wood

Flow rheology of light foams generated from aqueous solutions of polyvinyl alcohol

Ari Jasberg et al.

Summary: Recent studies have shown that foam-assisted application of additives into a wet web has advantages over the conventional way of adding the chemicals into the pulp suspension before forming. This study quantifies the rheological behavior of foams with polyvinyl alcohol as the surfactant, providing correlations for foam viscosity and slip flow. The results can help engineers in developing foam coating devices and processes.

TAPPI JOURNAL (2023)

Add to Collection

Article Materials Science, Paper & Wood

Chemical addition to wet webs using foam application

Tuomo Hjelt et al.

Summary: The conventional way of adding chemicals to paper is challenging in many cases, leading to inefficiency in functionalization of paper. One novel method is dosing chemicals to the wet web via foam application, which allows better control over the penetration of starch. The impact of parameters such as vacuum level, amount of added chemical, and viscosity of the foaming liquid on starch penetration into wet webs was studied.

TAPPI JOURNAL (2023)

Add to Collection

Article Materials Science, Paper & Wood

New opportunities in the paper and nonwovens industries with foam-assisted web forming and chemical application

Antti Oksanen et al.

Summary: Foam-assisted web forming and chemical application technologies have been shown to enhance manufacturing efficiency and product quality in the paper and nonwovens industries. Pilot machine trials demonstrated the potential benefits of foam forming and foam-assisted application of chemicals in producing high-bulk webs with improved strength. These technologies offer material cost savings and the ability to manufacture high-performance products.

TAPPI JOURNAL (2023)

Add to Collection

Article Mechanics

Entrance length estimates for flows of power-law fluids in pipes and channels

Chryso Lambride et al.

Summary: The traditional definition of entrance length may not be accurate for non-Newtonian flows, as the flow close to the centerline can evolve faster than the flow near the walls. Alternative definitions based on wall shear stress have been proposed. Numerical calculations of entrance length for power-law fluids in pipes and channels showed that in pipes, the centerline and global entrance lengths coincide only for power-law exponents larger than 0.7.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2023)

Add to Collection

Article Mechanics

Experimental study of rheological behavior of foam flow in capillary tubes

Sagyn Omirbekov et al.

Summary: This study investigates the flow of foam in highly permeable porous media, focusing on the behavior in capillary tubes. The study finds that foam exhibits shear-thinning behavior in all capillary tubes and successfully describes the foam rheology using the Herschel-Bulkley model. Additionally, the study shows that the material type and tube diameter influence the transition foam quality, and hydrophobic tubes have higher apparent viscosity than hydrophilic glass tubes.

JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2022)

Add to Collection

Review Chemistry, Physical

Foam forming of fiber products: a review

Tuomo Hjelt et al.

Summary: This review discusses the mechanisms and influences of aqueous foam as a transfer medium to form lightweight materials. It shows that versatile raw materials can be used to form homogeneous fiber materials, making this technology suitable for a wide range of product applications. The wet foam characteristics can be utilized to tailor the performance of the dried material.

JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Textiles

A Novel Foam Coating Approach to Produce Abrasive Structures on Textiles

Eija Kentta et al.

Summary: A novel coating approach has been developed to produce abrasive structures with foam coating on textile substrates, which can produce an even coating layer and reduce airborne particles during the coating process for improved workplace safety.

AUTEX RESEARCH JOURNAL (2022)

Add to Collection

Article Materials Science, Paper & Wood

Application of foamed additives to the surface of wet handsheets

Terry Bliss et al.

Summary: The study explored the application of foamed wet-end additives on wet handsheets and demonstrated its usefulness. Results showed that foam-assisted addition had a more significant effect compared to wet-end addition and may have better application prospects in certain mills.

TAPPI JOURNAL (2021)

Add to Collection

Article Materials Science, Paper & Wood

Real-time monitoring of bubble size distribution in a foam forming process

Antti Koponen et al.

TAPPI JOURNAL (2019)

Add to Collection

Article Materials Science, Paper & Wood

Polyvinyl alcohol as foaming agent in foam formed paper

Jens-Mikael Gottberg et al.

TAPPI JOURNAL (2019)

Add to Collection

Article Materials Science, Paper & Wood

Novel thin functional coatings for paper by foam coating

Karita Kinnunen-Raudaskoski et al.

TAPPI JOURNAL (2017)

Add to Collection

Article Engineering, Chemical

Physical meaning of the Sauter mean diameter of spherical particulate matter

Przemyslaw B. Kowalczuk et al.

PARTICULATE SCIENCE AND TECHNOLOGY (2016)

Add to Collection

Article Multidisciplinary Sciences

Close relationship between a dry-wet transition and a bubble rearrangement in two-dimensional foam

Yujiro Furuta et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Chemistry, Physical

Experimental results on the flow rheology of fiber-laden aqueous foams

Ari Jasberg et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2015)

Add to Collection

Article Chemistry, Physical

Effect of poly(vinyl alcohol-co-vinyl acetate) copolymer blockiness on the dynamic interfacial tension and dilational viscoelasticity of polymer-anionic surfactant complex at the water-1-chlorobutane interface

Leonard Ionut Atanase et al.

SOFT MATTER (2015)

Add to Collection

Article Chemistry, Physical

Yield stress and elasticity of aqueous foams from protein and surfactant solutions - The role of continuous phase viscosity and interfacial properties

M. Lexis et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2014)

Add to Collection

Review Chemistry, Physical

Rheology of foams and highly concentrated emulsions

Sylvie Cohen-Addad et al.

CURRENT OPINION IN COLLOID & INTERFACE SCIENCE (2014)

Add to Collection

Article Chemistry, Physical

Close packing density of polydisperse hard spheres

Robert S. Farr et al.

JOURNAL OF CHEMICAL PHYSICS (2009)

Add to Collection

Review Chemistry, Physical

The role of surfactant type and bubble surface mobility in foam rheology

Nikolai D. Denkov et al.

SOFT MATTER (2009)

Add to Collection

Article Chemistry, Physical

Rheology of colloidal gas aphrons (microfoams)

Sophie Larmignat et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2008)

Add to Collection

Article Mechanics

Aqueous foam slip and shear regimes determined by rheometry and multiple light scattering

Sebastien Marze et al.

JOURNAL OF RHEOLOGY (2008)

Add to Collection

Article Engineering, Mechanical

Development-length requirements for fully developed Laminar pipe flow of inelastic non-Newtonian liquids

R. J. Poole et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2007)

Add to Collection

Review Physics, Condensed Matter

Rheology of liquid foam

R Höhler et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2005)

Add to Collection

Article Chemistry, Physical

Measurement and modeling of the flow behavior of aqueous foams using a recirculating pipe rheometer

B Herzhaft et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)

Add to Collection

Article Chemistry, Physical

Wall slip and viscous dissipation in sheared foams: Effect of surface mobility

ND Denkov et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)

Add to Collection

Article Engineering, Chemical

A critical assessment of the Jastrzebski interface condition for the capillary flow of pastes, foams and polymers

PJ Martin et al.

CHEMICAL ENGINEERING SCIENCE (2005)

Add to Collection

Article Energy & Fuels

Fluid flow in coiled tubing: A literature review and experimental investigation

Y Zhou et al.

JOURNAL OF CANADIAN PETROLEUM TECHNOLOGY (2004)

Add to Collection

Article Mechanics

Self-lubricated transport of aqueous foams in horizontal conduits

MI Briceño et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2003)

Add to Collection

Article Chemistry, Physical

Bubble shapes and Orientations in low Re simple shear flow

AC Rust et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2002)

Add to Collection

Article Engineering, Chemical

The flow of gas-liquid foams in vertical pipes

NS Deshpande et al.

CHEMICAL ENGINEERING SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.