Related references
Note: Only part of the references are listed.
Article
Engineering, Environmental
Yang Song et al.
Summary: In this study, O-3/H2O2 and O-3/PMS methods were used to control the formation of NDMA, with O-3/PMS being more effective. SO4 center dot- significantly contributed to the control of NDMA formation, and injecting small quantities of ozone multiple times further minimized its concentration. Additionally, the effects of tannic acid, bromide, and bicarbonate on NDMA formation were investigated.
JOURNAL OF HAZARDOUS MATERIALS
(2023)
Review
Chemistry, Physical
Jorge Rodriguez-Chueca et al.
Summary: In recent decades, UV-AOPs have been used to remove various contaminants from polluted water, but their industrial-scale application is limited by high operational costs. Researchers have been working on increasing their efficiency and reducing costs by optimizing operational parameters, developing photocatalytic materials, and combining different UV-AOPs for pollutant treatment.
Article
Engineering, Environmental
Sara Feijoo et al.
Summary: Improving current wastewater treatments to ensure a clean and sustainable water supply is a contemporary challenge. This study combines process modelling for the design of an electrochemical Advanced Oxidation Process (eAOP) with the identification of its environmental impacts. Different scenarios evaluated show that a standardized modular reactor operated in batch mode is the most sustainable treatment option. The main environmental hotspot is the electrical energy consumed by auxiliary pumps rather than the electrochemical reactor itself.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Environmental Sciences
M. N. Arifin et al.
Summary: The presence of phenolic compounds in water poses severe risks, and nitro- and alkyl-phenolic compounds have been categorized as precedence contaminants by the US EPA. Therefore, efficient treatment methods for wastewater containing these compounds are urgently needed.
ENVIRONMENTAL RESEARCH
(2023)
Review
Water Resources
Zhila Honarmandrad et al.
Summary: Sulfate radical advanced oxidation processes (SR-AOP) have been successfully utilized for the degradation of antibiotics in water and wastewater treatment. This review discusses the mechanisms and applications of SR-AOPs in antibiotics degradation. The progress in this field, including the most promising developments and remaining challenges, is highlighted. The most susceptible and persistent oxidation groups of pharmaceuticals are summarized, and the highest effectiveness is reported for degradation of pharmaceuticals at ppb level. A scavenging effect is observed when the oxidant dose is 0.7 mM for the persulfate (PS) and 2 mM for the peroxymonosulfate (PMS). Future development requires simple persulfate activation systems for real matrix treatment.
WATER RESOURCES AND INDUSTRY
(2023)
Article
Engineering, Environmental
S. Guerra-Rodriguez et al.
Summary: This research explores the application of advanced oxidation processes (AOPs) for wastewater reclamation at pilot scale, which has been a major limitation in this field. Pilot-scale studies on sulfate radical-based AOPs (SR-AOPs) are rare, although there has been an increasing interest in them in recent years. The activation of peroxymonosulfate (PMS) can be enhanced by UV-A radiation or other oxidants like hydrogen peroxide (H2O2) or ozone (O3), leading to more efficient processes with lower reagent consumption. The combination of 0.5 mM PMS and 0.25 g·h-1 O3 showed the fastest inactivation of Enterococcus faecalis, achieving complete inactivation in less than 45 minutes. The combination of PMS, H2O2, and UV-A radiation also exhibited significant synergy to achieve total inactivation in less than 120 minutes, albeit with lower performance than the PMS/O3 system. Mechanistic studies revealed that the sulfate radical (SO4-) was responsible for bacterial inactivation in the PMS/O3 system, while the dominant species varied in the PMS/H2O2/UV-A system depending on the molar ratio of the oxidants. The treatments studied were effective in simultaneously eliminating pathogenic microorganisms such as Enterococcus faecalis, Escherichia coli, and Staphylococcus aureus, making this technology a viable alternative to conventional disinfection treatments.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Engineering, Environmental
Zhi Fang et al.
Summary: This study explores the degradation of naphthenic acids (NAs) in oil sands process water (OSPW) using peroxymonosulfate (PMS) activated by ozone. The results show that the ozone/PMS system accelerates the degradation of NA model compounds, with a high removal rate observed. The synergetic effect of ozone and PMS is responsible for the enhanced degradation.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2023)
Article
Engineering, Environmental
Hao Sun et al.
Summary: A biochar composite loaded with nZVI particles and MoS2 nanosheets (nZVI/MoS2-BC) was prepared and used for efficient activation of peroxymonosulfate (PMS) to degrade refractory organics. The interaction between nZVI and MoS2 increased the reaction sites and improved the dispersing of nZVI on the biochar surface. PMS activated by nZVI/MoS2-BC produced reactive oxygen species (ROSs) to degrade pollutants. The increased specific surface area and electrical conductivity facilitated the electron transfer and enhanced the pollutant degradation.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2023)
Article
Green & Sustainable Science & Technology
Christine Roth et al.
Summary: This study compares the environmental impacts of two different drinking water treatment scenarios (AOP and LPRO) using a life cycle assessment method. The results show that under the condition of electricity provided by renewable energy sources, the LPRO-based treatment has lower environmental impacts compared to the AOP-based treatment. Electricity and chemical agents used in the treatment process are the main contributors to the environmental impacts. However, further research is needed for the evaluation of treatment benefits.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Environmental Sciences
Eva Risch et al.
Summary: This study evaluates the environmental efficiency of two advanced wastewater treatment technologies using Life Cycle Assessment framework, finding that the direct water quality benefits are outweighed by indirect impacts from energy and resource demands. Future research should include more water quality aspects to assess the complete policy implications of micropollutant removal strategies.
SCIENCE OF THE TOTAL ENVIRONMENT
(2022)
Article
Environmental Sciences
Joana F. J. R. Pesqueira et al.
Summary: This study assessed the life cycle impacts of combining UVC with different oxidants and concentrations for removing micropollutants. It found that, for environmental considerations, hydrogen peroxide is the best option, as sulfate-based oxidants may have lower treatment times but greater environmental impacts.
SCIENCE OF THE TOTAL ENVIRONMENT
(2022)
Article
Green & Sustainable Science & Technology
Atima Dubsok et al.
Summary: This study assesses the environmental impacts of cyanate degradation using nano-TiO2/FeCl3 photocatalysis and compares the life cycle impacts under different irradiation sources. The results show that aquatic ecotoxicity, nonrenewable energy, terrestrial ecotoxicity, and global warming are the main contributors to environmental damage. Electricity consumption associated with climate change has the greatest environmental impact.
JOURNAL OF CLEANER PRODUCTION
(2022)
Article
Engineering, Environmental
Dan Zhong et al.
Summary: This study explores the use of pipe deposits from water networks as catalysts for a H2O2/peroxymonosulfate oxidation system. By adding different components of the deposits, the removal effect of chloramphenicol was investigated. The study provides insights into the kinetics and reaction mechanism of the catalytic degradation process, with the aim of effectively removing pollutants and utilizing resources.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2022)
Article
Engineering, Environmental
Hawzhin Amanollahi et al.
Summary: By comparing different processes, it was found that the VUV/H2O2/PMS process showed the best performance in converting NH4+ to N-2, with high removal efficiency and N-2 selectivity. Operating under near neutral pH, it can rapidly and efficiently remove high concentrations of NH4+, making it a promising technique.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Article
Environmental Sciences
Sonia Guerra-Rodriguez et al.
Summary: The study showed that the simultaneous degradation of multiple classes of MPs in secondary treated wastewater using UV-A radiation activated PMS without pH adjustment or iron addition is effective. Synergies between radiation and the oxidant were demonstrated, with an average extent of synergy of 69.1%, making the treatment efficient in reducing toxicity for water reuse.
SCIENCE OF THE TOTAL ENVIRONMENT
(2021)
Review
Environmental Sciences
Adeola Julian Sorinolu et al.
Summary: This paper discusses the impacts of treated wastewater and sewage sludge reuse on the accumulation of antibiotics and antibiotic resistance genes in agricultural lands and crops, emphasizing the importance of exposure assessment and dose-response assessment in risk assessment. The study also identifies research gaps in current knowledge, highlighting the need for further investigation into soil conditions affecting gene transfer, environmental factors affecting the migration of antibiotic resistance genes in soil and crops.
Article
Environmental Sciences
Joana F. J. R. Pesqueira et al.
Summary: Micropollutants have been linked to freshwater and human toxicity, with their occurrence in water bodies mainly coming from the discharge of effluents from urban wastewater treatment plants. The addition of advanced treatment processes can reduce toxicity, but it also requires more resources and energy, leading to other environmental impacts. Solar-based treatments show great potential, and photocatalysis using TiO2 treatment appears to be the most suitable option for removing organic micropollutants.
SCIENCE OF THE TOTAL ENVIRONMENT
(2021)
Article
Green & Sustainable Science & Technology
Kledja Canaj et al.
Summary: The study shows that wastewater reuse can reduce water consumption and nutrient pollution but may have additional impacts on energy and infrastructure. Despite some negative effects on resources, it brings benefits to human health and ecosystems, with lower total environmental impact and external costs compared to baseline scenarios.
JOURNAL OF CLEANER PRODUCTION
(2021)
Article
Environmental Sciences
Riccardo Delli Compagni et al.
Article
Engineering, Environmental
Stella G. Michael et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Green & Sustainable Science & Technology
Luca Sbardella et al.
JOURNAL OF CLEANER PRODUCTION
(2020)
Review
Green & Sustainable Science & Technology
Joana F. J. R. Pesqueira et al.
JOURNAL OF CLEANER PRODUCTION
(2020)
Review
Chemistry, Multidisciplinary
Gregorio Crini et al.
ENVIRONMENTAL CHEMISTRY LETTERS
(2019)
Article
Environmental Sciences
Alejandro Gallego-Schmid et al.
SCIENCE OF THE TOTAL ENVIRONMENT
(2019)
Article
Environmental Sciences
S. Arzate et al.
SCIENCE OF THE TOTAL ENVIRONMENT
(2019)
Article
Engineering, Environmental
Andrea Lopez et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
(2019)
Article
Green & Sustainable Science & Technology
Spyros Foteinis et al.
JOURNAL OF CLEANER PRODUCTION
(2018)
Article
Environmental Sciences
Raphael Ricardo Zepon Tarpani et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT
(2018)
Article
Green & Sustainable Science & Technology
Efthalia Chatzisymeon et al.
JOURNAL OF CLEANER PRODUCTION
(2013)
Review
Engineering, Environmental
Ll. Corominas et al.
