☆ 4.7 Article

Dual-strategy coupling driven versatile carbon-based anode for potassium-ion/potassium metal storage

CHEMICAL ENGINEERING JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

Achieving high-capacity and long-life K+ storage enabled by constructing yolk-shell Sb2S3@N, S-doped carbon nanorod anodes

Bensheng Xiao et al.

Summary: This study proposes a yolk-shell structured Sb2S3 confined in N, S co-doped hollow carbon nanorod as a promising anode for potassium-ion batteries. The structure effectively addresses the challenges of volume expansion and sluggish kinetics, resulting in outstanding cycling performance and rate capability. The mechanism of performance enhancement and K+ storage of Sb2S3 is elucidated through in situ/ex situ microscopic and spectroscopic characterizations.

JOURNAL OF ENERGY CHEMISTRY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Boosting K+ Capacitive Storage in Dual-Doped Carbon Crumples with B-N Moiety via a General Protic-Salt Synthetic Strategy

Xueyu Lian et al.

Summary: The study shows that the presence of B-N moiety enhances the adsorption capability of K+, leading to high reversible capacity and cycle stability of the BNC electrode in PIBs. The use of a protic-salt derived BNC material brings new possibilities for improving the performance of PIB devices.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Fast Intercalation in Locally Ordered Carbon Nanocrystallites for Superior Potassium Ions Storage

Xu Han et al.

Summary: By designing different structures of hard carbons, this study found that carbon spheres (CS) exhibit impressive performance, mainly attributed to the intercalation into the locally-ordered carbon nanocrystallites, showing significant pseudocapacitive dominating behavior.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Enabling Fast Na+ Transfer Kinetics in the Whole-Voltage-Region of Hard-Carbon Anodes for Ultrahigh-Rate Sodium Storage

Xiuping Yin et al.

Summary: This study reports an ultrafast sodium storage throughout the whole-voltage region by rationally adjusting the physical parameters of hard carbons through a ZnO-assisted etching strategy. It is found that the storage capacity of sodium is related to the p-band center of the carbon material, and the balance between adsorption energy and diffusion barrier is critical in improving charge-storage kinetics. The prepared hard carbon microspheres exhibit high rate performance and unprecedented electrochemical performance at extremely low temperature.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Defect-Selectivity and Order-in-Disorder Engineering in Carbon for Durable and Fast Potassium Storage

Yaxin Chen et al.

Summary: This study reports a self-template strategy for in situ defect-selectivity and order-in-disorder synergetic engineering in carbon, which simultaneously enhances the potassium storage capability, rate capability, and cyclic stability. By tuning defect sites and inducing surface atom rearrangement, the carbon material achieves high conductivity and abundant reversible carbon vacancies.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Understanding the role of nitrogen and sulfur doping in promoting kinetics of oxygen reduction reaction and sodium ion battery performance of hollow spherical graphene

Weiheng Chen et al.

Summary: A simple and economical one-step doping strategy is used to prepare N, S co-doped graphene hollow spheres (NSGHS), which exhibit remarkable activity for oxygen reduction reactions (ORR) and sodium-ion batteries (SIBs) with high catalytic activity and stability.

CARBON (2022)

Add to Collection

Article Chemistry, Physical

Advanced Pre-Diagnosis Method of Biomass Intermediates Toward High Energy Dual-Carbon Potassium-Ion Capacitor

Peng Cai et al.

Summary: A method for selecting biomass precursors and improving the structure of carbon materials to enhance the performance of potassium ion capacitors was proposed. The carbon materials obtained using this method as the battery-type anode exhibit high energy density and super high power output.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Boosting the potassium-ion storage performance enabled by engineering of hierarchical MoSSe nanosheets modified with carbon on porous carbon sphere

Mengting Cai et al.

Summary: This study reports a hierarchically structured superior anode material that significantly enhances the performance of potassium-ion batteries. The anode, consisting of assembled MoSSe nanosheets anchored on a porous carbon sphere and encapsulated within a thin carbon layer, exhibits high reversible capacity, good rate capability, and superior cyclic performance due to expanded interlayer spacing, abundant anion vacancies, and the protective and conductive properties of the carbon layers.

SCIENCE BULLETIN (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Coupling of Metallic VSe2 and Conductive Polypyrrole for Boosted Sodium-Ion Storage by Reinforced Conductivity Within and Outside

Yuhao Yi et al.

Summary: In this study, polypyrrole-encapsulated VSe2 nanoplates were synthesized and demonstrated to have enhanced sodium/potassium-storage performances. The VSe2@PPy nanoplates exhibited superior rate capability and cycling stability, making them a promising candidate for sodium/potassium-ion batteries.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering Electronic Transfer Dynamics and Ion Adsorption Capability in Dual-Doped Carbon for High-Energy Potassium Ion Hybrid Capacitors

Jingyu Gao et al.

Summary: This study develops a new sodium and potassium ion energy storage material that achieves superior storage performance using dual-doped hollow carbon spheres. The material exhibits enhanced electronic transfer dynamics and ion adsorption capability, leading to high-performance potassium ion hybrid capacitors with significant energy density and excellent cycling stability. The research advances the development of sodium/potassium ion storage devices and reveals the embedded ion storage mechanism.

ACS NANO (2022)

Add to Collection

Article Chemistry, Physical

N/S co-doped carbon nanosheet bundles as high-capacity anode for potassium-ion battery

Jinhui Cao et al.

Summary: By utilizing an interconnected nitrogen/sulfur co-doped carbon nanosheep bundle as the potassium ions storage material, high reversible specific capacity, close to 100% coulombic efficiency, excellent rate performance, and long cycle stability can be achieved.

NANO RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Rational design of Sn4P3/Ti3C2Tx composite anode with enhanced performance for potassium-ion battery

Jie Zhao et al.

Summary: A sandwich-like structured Sn4P3/Ti3C2Tx material was designed and synthesized as an anode material for potassium-ion batteries, which showed excellent cycle stability and rate capability due to the synergistic effect between Sn4P3 and Ti3C2Tx, as well as significant capacitive contribution.

RARE METALS (2022)

Add to Collection

Article Chemistry, Applied

Interconnected carbon nanocapsules with high N/S co-doping as stable and high-capacity potassium-ion battery anode

Honghui Bi et al.

Summary: In this study, N/S co-doped carbon nanocapsule (NSCN) was developed for superior potassium ion storage in batteries. The NSCN electrode exhibited high reversible capacity, outstanding rate capability, and favorable cycle stability, providing inspiration for the optimization of energy storage materials through structure and doping engineering.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Dual-function engineering to construct ultra-stable anodes for potassium-ion hybrid capacitors: N, O-doped porous carbon spheres

Shuming Dou et al.

Summary: This study demonstrates the successful fabrication of N/O co-doped porous carbon spheres (PCSs) with high content of -C = O through dual-function engineering for heteroatom doping and pore constructing. The PCSs exhibit outstanding K+-storage performance, superior rate capability, and unprecedented ultralong-term cycling stability. In-situ Raman analysis reveals a reversible adsorption-intercalation hybrid K+-storage mechanism. This work opens a new avenue to construct carbonaceous electrode candidates for high-performance potassium-ion hybrid capacitors (PIHCs).

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Concunrent manipulation of anion and cation adsorption kinetics in pancake-like carbon achieves ultrastable potassium ion hybrid capacitors

Gongrui Wang et al.

Summary: The researchers prepared a bi-functional hierarchical porous carbon material with superior energy storage performance for potassium ion hybrid capacitors. The material exhibited high specific capacity, stable cycling capability, and high energy/power density. The enhanced potassium ion storage was attributed to the synergy of structure, electronic properties, and ion adsorption kinetics. This study is of great importance for large-scale energy storage.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

K-Functionalized Carbon Quantum Dots-Induced Interface Assembly of Carbon Nanocages for Ultrastable Potassium Storage Performance

Yu Hu et al.

Summary: Carbon nanocages (CNCs) with a unique cage-like structure, large surface area, and rich carboxyl groups are synthesized using low-cost glucose as the carbon precursor and a facile K-functionalized carbon quantum dots (K-CQDs)-induced assembly route. The resulting CNCs exhibit high reversible capacity and long-term cycling stability as an anode.

SMALL METHODS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Key Factor Determining the Cyclic Stability of the Graphite Anode in Potassium-Ion Batteries

Fu Yuan et al.

Summary: This study reveals that the capacity fading of graphite anode in PIBs is caused by the continual accumulation of the solid electrolyte interphase (SEI), rather than the larger volume expansion of graphite. This finding provides scientific guidance for the application of graphite anode in PIBs.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Lithiophilic Interphase Porous Buffer Layer toward Uniform Nucleation in Lithium Metal Anodes

Xiaohua Shen et al.

Summary: This study presents an innovative Cu collector with lithiophilicity and a dense lithiophilic-enriched solid electrolyte interphase layer, which enables stable charge transfer and inhibits the growth of lithium dendrites. The addition of flexible graphene layer enhances the structural integrity and electron transport kinetics.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Asymmetric Co-N3P1 Trifunctional Catalyst with Tailored Electronic Structures Enabling Boosted Activities and Corrosion Resistance in an Uninterrupted Seawater Splitting System

Xingkun Wang et al.

Summary: This study utilized single Co-N-C catalysts with asymmetric Co-N3P1 structure formed by P-doping to optimize the activities and stability of oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction, while maintaining high Cl--corrosion resistance.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Bitumen-Derived Onion-Like Soft Carbon as High-Performance Potassium-Ion Battery Anode

Wen Tan et al.

Summary: In this study, onion-like soft carbon (OLSC) with high heteroatom content is successfully synthesized as an anode material for potassium-ion batteries. The OLSC exhibits a low voltage plateau, high capacity, and long cycle life, while enabling fast potassium ion transport. This research provides new insights for improving carbon-based anodes for potassium-ion batteries.

SMALL (2022)

Add to Collection

Review Chemistry, Physical

Metal Sulfide-Based Potassium-Ion Battery Anodes: Storage Mechanisms and Synthesis Strategies

Yichen Du et al.

Summary: This review summarizes and discusses the electrochemical reaction mechanisms, challenges, and synthesis methods of metal sulfide (MS) anode materials for potassium-ion batteries (PIBs). By optimizing the synthesis methods, the problems encountered by MSs in PIBs can be solved, and an ideal architecture for high-performance PIBs can be constructed.

ACTA PHYSICO-CHIMICA SINICA (2022)

Add to Collection

Article Chemistry, Physical

Multifunctional sulfate-assistant synthesis of seaweed-like N,S-doped carbons as high-performance anodes for K-ion capacitors

Mengyue Liu et al.

Summary: This study presents the direct synthesis of a seaweed-like porous carbon with N/S heteroatoms using fish scale as the precursor and K2SO4 as a triple-functional auxiliary. The NSPC700 anode, derived from this carbon material, exhibits high reversible capacity, good rate capability, and long cycling stability. Assembled K-ion capacitors using this anode show high energy density, high power density, and long lifetime.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Harnessing the Volume Expansion of MoS3 Anode by Structure Engineering to Achieve High Performance Beyond Lithium-Based Rechargeable Batteries

Mingze Ma et al.

Summary: The 2D heterostructure of amorphous molybdenum sulfide on reduced graphene surface shows low strain and fast reaction kinetics for beyond-lithium-ions storage, leading to excellent cycling performance and electrochemical performance.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Sulfur-Rich Graphene Nanoboxes with Ultra-High Potassiation Capacity at Fast Charge: Storage Mechanisms and Device Performance

Yiwei Sun et al.

Summary: The utilization of sulfur-rich graphene nanoboxes in potassium ion battery and potassium ion capacitor anodes demonstrates exceptional rate capability, high reversible capacity, and outstanding cycling stability, along with revealing insights into the reversible energy storage mechanism and kinetic properties.

ACS NANO (2021)

Add to Collection

Article Chemistry, Physical

Protein-derived 3D amorphous carbon with N, O doping as high rate and long lifespan anode for potassium ion batteries

Yi Sun et al.

Summary: In this study, 3D amorphous carbon with nitrogen and oxygen dual doping was designed and synthesized for high performance potassium ion batteries (PIBs). The electrode showed high reversible capacity, excellent rate performance, and ultralong lifespan. The introduction of heteroatoms and construction of a 3D open pore network were found to facilitate K+ adsorption/desorption and reduce energy barriers for K+ diffusion.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Chemistry, Physical

Accordion-Like Carbon with High Nitrogen Doping for Fast and Stable K Ion Storage

Wenli Zhang et al.

Summary: A direct pyrolysis approach was demonstrated to synthesize highly nitrogen-doped accordion-like carbon anodes, which can buffer volume change and enable stable cycling. The hierarchical structure of accordion-like carbon provides high reversible capacity and superior cycling stability.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Kilogram-Scale Synthesis and Functionalization of Carbon Dots for Superior Electrochemical Potassium Storage

Lin Li et al.

Summary: This study proposes a low-cost, high-efficiency method for the synthesis of carbon dots via aldol condensation, achieving functionalization with N-doping and NS double doping. Additionally, functionalized 1D carbon fibers for high-performance potassium storage anodes were designed, utilizing the controllable assembly of carbon dots induced by a Zn compound.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrothermal Disproportionation of Biomass into Oriented Carbon Microsphere Anode and 3D Porous Carbon Cathode for Potassium Ion Hybrid Capacitor

Yong Qian et al.

Summary: A universal method is proposed in this study to fabricate oriented carbon microspheres (OCMS) and 3D porous carbon (3DPC) blocks from biomass via high-temperature hydrothermal process. The OCMS anode shows high capacity, the 3DPC cathode demonstrates long cycle life, and the assembled OCMS//3DPC potassium ion hybrid capacitor exhibits high energy and long cycle life.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Phosphorus and Oxygen Dual-Doped Porous Carbon Spheres with Enhanced Reaction Kinetics as Anode Materials for High-Performance Potassium-Ion Hybrid Capacitors

Shuoqing Zhao et al.

Summary: By designing phosphorus/oxygen dual-doped porous carbon spheres, this study achieved expanded interlayer distances, abundant redox active sites, and oxygen-rich defects, leading to high discharge capacity, outstanding rate capability, and ultralong cycling stability. The formation of P-C and P-O/P-OH bonds improved structural stability and contributed to a rapid surface-controlled potassium adsorption process, showing superior electrochemical performance in a potassium-ion hybrid capacitor.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Radial Pores in Nitrogen/Oxygen Dual-Doped Carbon Nanospheres Anode Boost High-Power and Ultrastable Potassium-Ion Batteries

Hongli Deng et al.

Summary: Constructing electrode materials with radial pores and N/O dual-doping in carbon nanospheres allows for fast ions and electrons transport, achieving high-power density and long-term cycling life in potassium-ion batteries. The unique structural engineering enables highly reversible electrochemical reactions and fast de/intercalation kinetics during rapid charge-discharge processes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Fast potassium migration in mesoporous carbon with ultrathin framework boosting superior rate performance for high-power potassium storage

Huan Liu et al.

Summary: Mesoporous carbon with ultrathin framework (MCUF) was designed as an anode material for stable and high-power potassium storage performance, showing excellent potassium storage characteristics. The novel non-flammable potassium-ion capacitors assembled with MCUF exhibited outstanding cyclability, rate performance, and energy/power densities.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Cell-like-carbon-micro-spheres for robust potassium anode

Hongbo Ding et al.

Summary: Inspired by the structure of biological cells, biomimetic carbon cells (BCCs) were synthesized and used as anodes for potassium ion batteries (PIBs). The unique structural characteristics of BCCs result in PIBs with high capacity, excellent cycle stability, and outstanding rate performance.

NATIONAL SCIENCE REVIEW (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Carbon-coated WS2 nanosheets supported on carbon nanofibers for high-rate potassium-ion capacitors

Shitao Geng et al.

Summary: The carbon-coated WS2 nanosheets supported on carbon nanofibers demonstrate high reversible capacity and rate performance, with an intercalation-conversion reaction mechanism confirmed. First-principles calculations confirm fast K+ diffusion kinetics and high K-adsorption ability for the C-WS2@CNFs anode. The potassium ion capacitor assembled from this anode and activated carbon nanofibers cathode delivers superior energy density, rate capability, and cycle life.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

A general strategy for embedding ultrasmall CoMx nanocrystals (M = S, O, Se, and Te) in hierarchical porous carbon nanofibers for high-performance potassium storage

Chenling Lai et al.

Summary: This study demonstrates a versatile strategy for fabricating hierarchical porous carbon nanofibers with closely coupled Co-based ultrafine nanoparticles and a carbon matrix to achieve high-performance anode materials for potassium-ion batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Facile Synthesis of Hollow Carbon Nanospheres and Their Potential as Stable Anode Materials in Potassium-Ion Batteries

Xian-Sen Tao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Site-Selective Doping Strategy of Carbon Anodes with Remarkable K-Ion Storage Capacity

Wenli Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Boosting the Potassium-Ion Storage Performance in Soft Carbon Anodes by the Synergistic Effect of Optimized Molten Salt Medium and N/S Dual-Doping

Qingdi Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Surface Amorphization of Vanadium Dioxide (B) for K-Ion Battery

Youpeng Li et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

A Three-Dimensional Carbon Framework Constructed by N/S Co-doped Graphene Nanosheets with Expanded Interlayer Spacing Facilitates Potassium Ion Storage

Wenxiu Yang et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Facile renewable synthesis of nitrogen/oxygen co-doped graphene-like carbon nanocages as general lithium-ion and potassium-ion battery anodes

Yuanhe Sun et al.

CARBON (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Cucurbit[6]uril-Derived Nitrogen-Doped Hierarchical Porous Carbon Confined in Graphene Network for Potassium-Ion Hybrid Capacitors

Daping Qiu et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Nitrogen-doped carbon nanotubes as an anode for a highly robust potassium-ion hybrid capacitor

Xiuqi Li et al.

NANOSCALE HORIZONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Hierarchically Structured Nitrogen-Doped Carbon Microspheres for Advanced Potassium Ion Batteries

Junmin Ge et al.

ACS MATERIALS LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Kinetics Enhanced Nitrogen-Doped Hierarchical Porous Hollow Carbon Spheres Boosting Advanced Potassium-Ion Hybrid Capacitors

Daping Qiu et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Graphite Anode for a Potassium-Ion Battery with Unprecedented Performance

Ling Fan et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Chemistry, Physical

A Large Scalable and Low-Cost Sulfur/Nitrogen Dual-Doped Hard Carbon as the Negative Electrode Material for High-Performance Potassium-Ion Batteries

Yu Liu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Sulfiphilic Few-Layered MoSe2 Nanoflakes Decorated rGO as a Highly Efficient Sulfur Host for Lithium-Sulfur Batteries

Wenzhi Tian et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Fast Redox Kinetics in Bi-Heteroatom Doped 3D Porous Carbon Nanosheets for High-Performance Hybrid Potassium-Ion Battery Capacitors

Xiang Hu et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Ultrahigh Nitrogen Doping of Carbon Nanosheets for High Capacity and Long Cycling Potassium Ion Storage

Xingqi Chang et al.

ADVANCED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Fast and stable potassium-ion storage achieved by in situ molecular self-assembling N/O dual-doped carbon network

Jiafeng Ruan et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Ultrafine Co2P nanorods wrapped by graphene enable a long cycle life performance for a hybrid potassium-ion capacitor

Yixuan Wang et al.

NANOSCALE HORIZONS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Hierarchical Porous Carbon Derived from Covalent Triazine Frameworks for High Mass Loading Supercapacitors

Daniel Baumann et al.

ACS MATERIALS LETTERS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fast Potassium Storage in Hierarchical Ca0.5Ti2(PO4)3@C Microspheres Enabling High-Performance Potassium-Ion Capacitors

Zhongyu Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Sulfur/Oxygen Codoped Porous Hard Carbon Microspheres for High-Performance Potassium-Ion Batteries

Mei Chen et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Biotemplating Growth of Nepenthes-like N-Doped Graphene as a Bifunctional Polysulfide Scavenger for Li-S Batteries

Qiucheng Li et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Physical

Enhanced storage capability and kinetic processes by pores- and hetero-atoms- riched carbon nanobubbles for lithium-ion and sodium-ion batteries anodes

Huawei Song et al.

NANO ENERGY (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.