Related references
Note: Only part of the references are listed.
Article
Materials Science, Multidisciplinary
Shaokun Chong et al.
Summary: A hierarchically structural design and sp(2) N-doping assist a conversion-alloying material, Sb2Se3, to achieve superior life span more than 1000 cycles in sodium- and potassium-ion batteries.
ENERGY & ENVIRONMENTAL MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Liping Yang et al.
Summary: In this study, a hollow structure design and phase structure engineering were used to enhance the electrochemical performance of (Bi-Sb)2S3@N-C anode in potassium ion batteries (PIBs). The (Bi-Sb)2S3@N-C anode exhibited superior (de)-potassiation kinetics, excellent rate performance, and long cycling life due to the unique reaction mechanism and advantages of the hollow nanostructure with carbon shell. Additionally, the (Bi-Sb)2S3@N-C//PTCDA full cell showed a high reversible capacity after 300 cycles.
Article
Engineering, Environmental
Shaokun Chong et al.
Summary: Nanoplate-structured Sb2Te3 anchored on graphene and N-doped C (Sb2Te3@rGO@NC) is used as an anode material for potassium-ion batteries, exhibiting a dual encapsulation effect that can effectively restrain large volume expansion and enhance electronic transfer and ion adsorption. The resulting Sb2Te3@rGO@NC electrode delivers high charge capacity, rate capability, and long-term lifetime, demonstrating the potential of Sb2Te3-based anodes for potassium-ion batteries and providing insights into the K-ion storage mechanism.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Chemistry, Multidisciplinary
Junhao Liu et al.
Summary: Due to the scarcity of lithium resources, potassium-ion batteries (PIBs) have gained attention as an alternative to lithium-ion batteries (LIBs) due to their similar electrochemical properties and more abundant potassium resources. This study investigates the effect of alloy composition on the electrochemical performance of SbBi alloy anodes for LIBs and PIBs. A nitrogen-doped carbon-coated SbxBi1-x (SbxBi1-x@NC) anode with tuned chemical compositions is designed and shows excellent cycling performance. The charge-discharge mechanism is studied through in situ X-ray diffraction and transmission electron microscopy.
Article
Chemistry, Physical
Wensheng Ma et al.
Summary: In this study, bimetallic Bi-Sb solid solutions in a porous carbon matrix were synthesized as anode material for sodium-ion batteries, effectively addressing the issue of performance degradation caused by volume expansion in alloy-type anodes during cycling.
Article
Nanoscience & Nanotechnology
Chan Yang et al.
Summary: In this study, self-supporting bimetallic nanoleaves consisting of Bi and Sb components were fabricated on carbon paper using a facile electrodeposition method. The synergistic effect of Bi and Sb and the change of electronic structure led to high formate selectivity and excellent stability in the electrochemical CO2 reduction reaction. Furthermore, the bimetallic Bi-Sb catalyst exhibited outstanding stability for formate generation in flow cells, which is rarely reported in previous studies. This work offers new insights into the development of bimetallic self-supporting electrodes for CO2 reduction.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Chemistry, Multidisciplinary
Xi Liu et al.
Summary: This study demonstrates a self-limited growth strategy to fabricate Bi (Sb) nanoparticles as electrochemically active and conductive coating embedded into honeycomb-like porous red phosphorus (HPRP), greatly improving the potassium-storage kinetics and stability. The introduction of amorphous Bi significantly decreases K+ diffusion barrier, enhances electrical conductivity, and accelerates potassium storage kinetics and stability. The HPRP@Bi anode shows high gravimetric and volumetric capacity and stable long lifespan in potassium-ion batteries.
ADVANCED FUNCTIONAL MATERIALS
(2023)
Article
Chemistry, Physical
Xue Tian et al.
Summary: A carbon-coated Sb/MXene heterostructure composite (CSM) was synthesized by adsorption of Sb3+ on MXene nanosheets followed by carbothermic reduction, which can withstand the large volume expansion of Sb and promote electron transfer kinetics. The CSM composite exhibited high capacity, stable cycling performance, and superior rate performance when used as an anode for PIBs.
Article
Chemistry, Physical
Sijin Dong et al.
Summary: Defect-enriched carbon nanosheets with controllable defect density were synthesized as high-efficiency anode materials for potassium-ion batteries. The nanosheets showed excellent rate performance, with a high specific capacity of 270.9 mAh g(-1) at 0.5 C and 189 mAh g(-1) at 10 C. The intrinsic defects in the carbon material improved the capacitive potassium storage capacity, accelerated potassium diffusion, and reduced potassium adsorption energy.
Article
Electrochemistry
Hai-Rui Shen et al.
Summary: This study successfully prepared an Sb-Co-P anode through low-cost electrodeposition, demonstrating its feasibility and effectiveness for sodium-ion batteries. Under specified conditions, the Sb21.0Co46.9P32.1 anode showed a high reversible charging capacity of 586.3 mAh·g(-1), with an initial coulombic efficiency of 84.4% and a capacity retention rate of 77.6% after 100 cycles. The improved electrochemical performance of the optimized Sb21.0Co46.9P32.1 anode is mainly attributed to its active-inactive-active matrix and unique leaf-shaped cluster structure. Furthermore, in situ X-ray diffraction revealed the reaction mechanism of sodium storage. This work provides a potential opportunity for the scalable fabrication of high-performance Sb-based alloys for sodium-ion batteries.
ELECTROCHIMICA ACTA
(2023)
Article
Chemistry, Multidisciplinary
Liping Yang et al.
Summary: This study demonstrates that the (Bi-Sb)2S3@N-C anode with robust hollow structure design and phase structure engineering exhibits superior kinetics and electrochemical performance in potassium ion batteries.
Article
Chemistry, Multidisciplinary
Sheng Wen et al.
Summary: The synergistic cooperation of oxygen vacancy, amorphous structure, and bulky polyanions in alloy-based phosphates/N-doped carbon composites improves the electrochemical performance of anode materials for alkali metal ion batteries. This enhancement is achieved through stress mitigation, ion transport facilitation, and electronic structure modification. The potassium storage mechanism of SnP2O7 involves a two-step process, including a conversion reaction and an alloying reaction.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Engineering, Environmental
Qingzhao Wu et al.
Summary: In this study, bismuth-antimony (BiSb) alloy confined in a three-dimensional carbon framework was synthesized to enhance potassium storage properties. The unique architecture shortened electronic transport routes, provided sufficient K-storage active sites, and effectively alleviated internal stress during charging and discharging processes. As a result, the composite electrode exhibited stable cycling performance and high-rate capability, indicating the potential for developing other energy storage materials.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Shihao Li et al.
Summary: An integrative and facile surface structures constructing strategy was provided to achieve stable cycling and fast charging in Li-rich Mn-based layered oxides (LLOs). The material with induced stable bi-phase coating layers delivers a high discharge specific capacity and excellent rate performance. The excellent fast charging performance and cycling stability were attributed to accelerated Li+ transportation rate and suppressed oxygen release, transition metals dissolution, and electrolyte attack.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Rakesh Verma et al.
Summary: This study presents a simple and cost-effective carbothermal reduction method for synthesizing a nanostructured material where antimony is encapsulated in an N-doped porous carbon framework. The optimized electrode exhibits high reversible capacity and rate capability under different current conditions. In addition, a full cell composed of this electrode and a specific cathode shows excellent cycling stability.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Decai Gong et al.
Summary: In this study, a simple strategy is proposed to encapsulate ultrasmall Sb nanodots into N-doped carbon nanowires, resulting in high-performance anodes for PDIBs. The combination of this anode with expanded graphite cathode forms a novel PDIB with superior performance in terms of capacity and cycling stability.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Sheng Wen et al.
Summary: By introducing KFSI salt and ultrathin TiO2 coating in electrolytes, the electrochemical performance of SnS/rGO anodes can be significantly improved, resulting in high Coulombic efficiency and ultrahigh capacity retention.
Article
Chemistry, Multidisciplinary
Jie Dang et al.
Summary: In this study, a bean pod-like free-standing membrane was designed to address the challenge of large volume change in SbSn alloy anode materials for sodium-ion batteries. The synergistic carbon matrix not only improved conductivity and flexibility, but also provided buffer space to alleviate volume change. The resulting membrane anode showed excellent electrochemical performance in terms of specific capacity and coulombic efficiency.
Article
Physics, Applied
Jing Li et al.
Summary: A dipole-engineering strategy is proposed to regulate the electronic contact properties of a 2D polar SbX and graphene van der Waals interface. The dipole and its associated potential step are found to be responsible for the regulating effect. Furthermore, an optoelectronic field-effect transistor is designed, which exhibits considerable responsivity and external quantum efficiency.
PHYSICAL REVIEW APPLIED
(2022)
Article
Chemistry, Multidisciplinary
Hui Shan et al.
Summary: This study demonstrates that heteroatom doping can effectively modify the crystal structure stability, charge/ion state, and bandgap of active materials, thus modulating the kinetics of electrode materials and enhancing the electron and K+ ion transfer in Ni-doped CoSe2 embedded in carbon nanocomposites.
Article
Chemistry, Multidisciplinary
Cheng Zheng et al.
Summary: This study improves the electrochemical performance of alloy-type anode materials for Na-ion batteries by introducing K+ ions as an electrolyte additive. The K+ ions accumulate on the electrode, slowing down local sodiation at hot spots, promoting uniform sodiation, and enhancing electrode stability.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Review
Chemistry, Physical
Ying Li et al.
Summary: This paper discusses the application and research progress of Sb-based materials in sodium-ion batteries (SIBs), and explores suitable modification strategies to improve their reversible capacity and cycle stability. In addition, the challenges and prospects of Sb-based anode materials in SIBs are pointed out, and further optimization directions are proposed.
ACTA PHYSICO-CHIMICA SINICA
(2022)
Article
Materials Science, Multidisciplinary
Xinyuan Shan et al.
Summary: In this study, a cost-effective, simple, and non-toxic SbSn/SP@C electrode was developed for sodium-ion batteries. The electrode exhibited high cycle stability and good reversible capacity, making it a promising candidate for sodium storage.
MRS COMMUNICATIONS
(2022)
Article
Chemistry, Multidisciplinary
Lishuang Xia et al.
Summary: This study demonstrates the preparation of Sb2Se3/CNFs by electrospinning and selenization treatment, showing promising performance as anodes for sodium-ion batteries with high reversible capacity and excellent rate capability. The combination of Na+ intercalation, conversion reaction, and alloying with Sb2Se3 contributes to the outstanding performances, while unique nanostructures provide large contact surface and tolerant accommodation to volume expansion, bringing high reversibility and long cycle durability, especially under high current density applications.
Article
Chemistry, Physical
Kuan-Ting Chen et al.
Summary: This study presents an electrode architecture made of submicron-sized nanocrystalline aggregates obtained from ball-milled BiSb crystals during the potassiation/depotassiation process for high performance and stability in potassium ion batteries. Through various analyses, it demonstrates the reaction mechanism of the nanocrystalline aggregates during composition evolution and cycling process.
Review
Chemistry, Physical
Samrat Sarkar et al.
Summary: This paper reviews the recent progress in semimetallic pnictogens as alloying anodes and their compounds mainly as conversion-alloying anodes, presenting various debatable sodiation mechanisms and proposing research directions to address existing challenges and perspectives.
Article
Chemistry, Multidisciplinary
Chuyun Huang et al.
Summary: A novel nanoconfined BiSb@TCS structure is designed in this study, effectively addressing the capacity fading and poor rate performance issues of bismuth-antimony alloy in potassium ion batteries, showing outstanding storage performance and great potential as a high-performance anode for potassium ion batteries.
Article
Chemistry, Multidisciplinary
Qinghua Li et al.
Summary: The study introduces an ultrafine antimony embedded in a porous carbon nanocomposite for sodium storage, showcasing excellent specific capacities and redox potential due to the use of a metal-organic framework-derived carbon framework. The materials exhibit a high level of reversibility during sodium insertion/extraction cycles, allowing for promising applications in advanced secondary batteries.
Article
Chemistry, Multidisciplinary
Rong Chao Cui et al.
Summary: The Bi NSs/NCNs as an anode demonstrates exceptional rate capabilities (489.3 mAh g(-1) at 50 A g(-1)) and long cycling stability (457.8 mAh g(-1) at 10 A g(-1) after 2000 cycles), surpassing all reported PIB anode materials. Such outstanding performance is mainly attributed to the stable solid-electrolyte interface formed in the glyme-based electrolyte and the unique interconnected porous nanostructure, both contributing to fast kinetics and high pseudocapacitive contributions during cycling.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Hui Shan et al.
Summary: The study demonstrates that heterostructure construction is an efficient method for enhancing K+ storage of transition metal selenides. Through obtaining materials with rich vacancies and ultrafine heterojunctions, the reversible potassium storage performance in potassium-ion batteries was significantly improved. Additionally, theoretical calculations show that the controllable heterojunction can dramatically promote potassium-ion diffusion.
ADVANCED MATERIALS
(2021)
Article
Electrochemistry
Lijie Yang et al.
Summary: The development of high-performance electrode materials for sodium-ion batteries remains a challenge due to volume changes in anode materials. Utilizing different redox potentials of metals and preparing composite materials can enhance battery performance, energy storage efficiency, and cycle stability.
ELECTROCHIMICA ACTA
(2021)
Article
Chemistry, Multidisciplinary
Tao Yang et al.
Summary: A general in situ self-template-assisted strategy has been proposed for the design and preparation of a series of M-Sb nanocomposites, which show enhanced electronic conductivity and structural integrity, as well as abundant interfacial lithium storage. Experimental results demonstrate the excellent cycling stability and high rate performance of these composite materials.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Physical
Yifan Zhang et al.
APPLIED SURFACE SCIENCE
(2020)
Article
Chemistry, Multidisciplinary
Peixun Xiong et al.
Article
Engineering, Environmental
Zheng Yi et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Engineering, Environmental
Jieun Hwang et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Chemistry, Multidisciplinary
Wei Zhang et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2020)
Article
Chemistry, Physical
Jue Wang et al.
ADVANCED ENERGY MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Guanyao Wang et al.
Article
Chemistry, Multidisciplinary
Jiangfeng Ni et al.
Article
Chemistry, Physical
Songtao Guo et al.
ENERGY STORAGE MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Kuan-Ting Chen et al.
Article
Nanoscience & Nanotechnology
Taohong Wang et al.
ACS APPLIED MATERIALS & INTERFACES
(2020)
Article
Chemistry, Physical
Dan Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS
(2020)
Article
Chemistry, Physical
Na Zhao et al.
Review
Chemistry, Multidisciplinary
Anni Wang et al.
Article
Chemistry, Physical
Zhiyuan Wang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2020)
Article
Chemistry, Multidisciplinary
Xing Ou et al.
ADVANCED FUNCTIONAL MATERIALS
(2017)
