4.7 Article

Polymer-aided microstructuring of moisture-stable GO-hybridized MOFs for carbon dioxide capture

Related references

Note: Only part of the references are listed.
Review Energy & Fuels

Review on Multidimensional Adsorbents for CO2 Capture from Ambient Air: Recent Advances and Future Perspectives

Yihan Shi et al.

Summary: The urgency of curbing global warming due to increasing CO2 emissions has received significant attention. Direct air capture (DAC) is an important and feasible technology to reduce CO2 emissions at nonpoint sources and achieve negative emissions. Solid porous sorbents have attracted attention for capturing CO2 from the atmosphere with ultralow CO2 concentration (ca. 400 ppm). However, most studies focus on nanoparticle-based adsorbents and their functionalized counterparts, which are more prone to weight loss in the atmosphere.

ENERGY & FUELS (2023)

Article Engineering, Environmental

Enhanced removal of cesium from hydrobiotite using polyacrylonitrile (PAN)-based nickel ferrocyanide beads

Hye-Nim Kim et al.

Summary: In this study, a bead-type adsorbent was added during the conventional acid washing process to improve the desorption of cesium from contaminated clay minerals. The synthesized adsorbent showed high selectivity for Cs+ and significantly increased the Cs+ desorption by inhibiting the re-adsorption of Cs+ on the clay mineral. Therefore, this technique has the potential to be a useful and effective method for decontamination of radioactive clay.

JOURNAL OF HAZARDOUS MATERIALS (2023)

Review Chemistry, Physical

Zeolites as Selective Adsorbents for CO2 Separation

Dina G. Boer et al.

Summary: This article reviews the properties of zeolites as CO2 adsorbents and critically presents and discusses their advantages and limitations. Firstly, an overview of the CO2 adsorption mechanisms on different types of zeolites is provided. Then, the relationship between the physicochemical properties of zeolites (framework type, Si/Al ratio, and extra-framework cations) and their performance as CO2 adsorbents for the separation of CO2/CH4 (biogas) and CO2/N2 (flue gas) mixtures is systematically discussed. Based on the identified trends and properties, a comparison of different zeolites is made, highlighting their advantages and drawbacks for CO2 adsorption. Finally, the state of the art in the shaping of zeolites in macroscopic format, which is crucial for their industrial utilization as adsorbents, is presented.

ACS APPLIED ENERGY MATERIALS (2023)

Article Green & Sustainable Science & Technology

Revealing the competitive effect of N2 and H2O towards CO 2 adsorption in N-rich ordered mesoporous carbons

E. Maruccia et al.

Summary: The CO2 capture capacity of N-rich ordered mesoporous carbons was evaluated under dry and moisture conditions, as well as in CO2/N2 gas mixtures. A nanocasting strategy was employed to obtain N-rich CMK-3-type carbons with fine-tuned pyrolysis treatment. The presence of surface nitrogen enhanced CO2/N2 selectivity, but also increased H2O uptake.

MATERIALS TODAY SUSTAINABILITY (2023)

Review Engineering, Environmental

Metal-organic framework hybrid adsorbents for carbon capture-A review

Solomon K. Gebremariam et al.

Summary: Metal-organic frameworks (MOFs) are promising adsorbent materials for CO2 capture. Hybridization with other materials can enhance their performance and overcome inherent drawbacks. This study critically reviews hybridized MOF adsorbents, providing insights and recommendations for further research in practical CO2 capture applications.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2023)

Article Nanoscience & Nanotechnology

Extrusion-Spheronization of UiO-66 and UiO-66_NH2 into Robust-Shaped Solids and Their Use for Gaseous Molecular Iodine, Xenon, and Krypton Adsorption

Alla Abramova et al.

Summary: This study investigates the use of extrusion-spheronization process to prepare robust and highly porous extrudates and granules from UiO-66 and UiO-66_NH2 metal-organic framework powders. The materials produced exhibited excellent performance in capturing gaseous iodine and adsorbing xenon and krypton. The addition of biosourced chitosan and hydroxyethyl cellulose (HEC) as binders improved the mechanical resistance of the shaped materials while retaining their functional properties. Binder-aided extrusion-spheronization is a suitable method for producing shaped solids with adequate mechanical strength and retained functionality.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Environmental

Ionothermal synthesis of phosphonitrilic-core covalent triazine frameworks for carbon dioxide capture

Vengatesan M. Rangaraj et al.

Summary: Covalent Triazine Frameworks (CTFs) with phosphazene core were synthesized for CO2 adsorption, showing high surface area and CO2 uptake capacity with promising potential for CO2 capture and adsorptive separation.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Nanoscience & Nanotechnology

Degradation of G-Type Nerve Agent Simulant with Phase-Inverted Spherical Polymeric-MOF Catalysts

Kimia Kiaei et al.

Summary: In this study, three Zr-MOFs with catalytic activity were synthesized using the phase inversion method and shaped into spherical polymeric beads. The results showed that these beads can effectively degrade simulant of chemical warfare agents and can be regenerated for multiple uses.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Chemical

An In-Situ-Grown Cu-BTC Metal-Organic Framework/Graphene Oxide Hybrid Adsorbent for Selective Hydrogen Storage at Ambient Temperature

Anish Mathai Varghese et al.

Summary: A Cu-BTC/GO metal-organic framework hybrid with ultralow GO content was developed and found to have enhanced surface area, pore volume, microporosity, hydrogen storage capacity, and selectivity compared to pure Cu-BTC. The incorporation of GO also suppressed the hydrophilicity of the hybrid material. This study highlights the potential of in-situ-developed MOF/GO hybrids as multifunctional hydrogen storage media.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2022)

Article Green & Sustainable Science & Technology

Improved method for increasing accessible pores of MIL-101(Cr) by encapsulation and removal of Phosphotungstic acid (PTA): Pd/PTA-MIL-101(Cr) as an effective catalyst for CO oxidation

Fateme Abbasi et al.

Summary: This study presents a new and simple method to encapsulate Phosphotungstic acid (PTA) into MIL-101 (Cr) cavities, resulting in PTA-MIL-101(Cr) with a higher surface area. PTA-MIL-101(Cr) shows 1.72 times the surface area of MIL-101(Cr) due to the formation of more accessible pores. The catalyst 3%Pd/PTA-MIL-101(Cr) outperforms other catalysts in CO oxidation, thanks to the high dispersion of Pd nanoparticles and the synergistic effects between Pd and PTA. The higher activity of Pd/PTA-MIL-101(Cr) is explained through various analyses, and the stabilization mechanism is also discussed.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Nanoscience & Nanotechnology

MIL-101-Cr/Fe/Fe-NH2 for Efficient Separation of CH4 and C3H8 from Simulated Natural Gas

Lu-Zhu Qin et al.

Summary: Stable mesoporous MOFs have been developed for efficient separation of methane and other light hydrocarbons in natural gas. These MOFs exhibit excellent stability and achieve commendable separation performances.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Chemistry, Physical

In-situ one-step synthesis of activated Carbon@MIL-101 (Cr) composites for hydrogen storage

Lu Luo et al.

Summary: Metal-organic frameworks (MOFs) have potential for developing novel adsorbing materials for H2 storage. A composite material, AC@MIL-101(Cr), was synthesized by combining activated carbon (AC) with MIL-101(Cr) MOF, showing improved adsorption performance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Engineering, Environmental

Insights into the performance of hybrid graphene oxide/MOFs for CO2 capture at process conditions by molecular simulations

Hongyu Zhao et al.

Summary: This study provides a general framework for understanding the mechanism of CO2 adsorption and separation on GO/MOFs hybrids, aiming to optimize the synthesis of desired materials. Molecular simulations were used to develop and validate models of experimentally available hybrid materials. The study confirmed that the interface between GO and MOFs enhances CO2 adsorption performance due to strong interactions and smaller pore sizes.

CHEMICAL ENGINEERING JOURNAL (2022)

Review Chemistry, Multidisciplinary

Advances in Post-Combustion CO2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Ru-Shuai Liu et al.

Summary: With the atmospheric CO2 concentration rapidly increasing to record levels, there is a growing need for advanced CO2 capture technologies. Physical adsorption-based separation technologies offer easy regeneration, high cycle stability, and potentially lower energy penalties and costs. Extensive research has been conducted ranging from novel porous adsorbents to practical separation practices, with a focus on intrinsic properties and industrial relevant variables to enhance CO2 capture.

CHEMSUSCHEM (2021)

Article Engineering, Environmental

Cellulose acetate-based membranes by interfacial engineering and integration of ZIF-62 glass nanoparticles for CO2 separation

Muhammad Mubashir et al.

Summary: This study evaluates the enhancement of CO2 permeation performance and CO2 plasticization resistance of composite membranes by using non-stoichiometric ZIF-62 MOF glass and cellulose acetate (CA); composite membranes loaded with 8 wt% of ZIF-62 glass showed the highest CO2 permeability and CO2/CH4 ideal selectivity; the findings confirm the potential of ZIF-62 glass materials for the design of composite membranes for CO2 separation at industrial scale.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Engineering, Environmental

Enhancing effect of UV activation of graphene oxide on carbon capture performance of metal-organic framework/graphene oxide hybrid adsorbents

Anish Mathai Varghese et al.

Summary: The development of a novel adsorbent based on Cu-BTC metal-organic framework and UV-irradiated graphene oxide has shown promising CO2 capture performance, with enhanced CO2 adsorption efficiency in humid CO2 mixtures.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Applied

Salt-free synthesis of Cu-BTC metal-organic framework exhibiting mesoporosity and enhanced carbon dioxide adsorption

Taofeeqah A. Agbaje et al.

Summary: The Cu-BTC (HKUST-1) metal-organic framework prepared using a copper mesh as the metal source exhibits high CO2 adsorption capacity and efficiency, with potential for cost-effective and environmentally-friendly scaled-up production of highly efficient porous materials for gas adsorption applications in the future.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Review Materials Science, Multidisciplinary

From metal-organic framework powders to shaped solids: recent developments and challenges

Bakytzhan Yeskendir et al.

Summary: Metal-organic frameworks have shown great potential in applications such as storage, capture, and delivery due to their highly porous structure. However, the main challenge lies in their shaping, requiring long-term mechanical stability and the preservation of physical and chemical properties. Existing shaping techniques include traditional methods like pelletization and extrusion, as well as emerging methods such as 3D printing and spray drying. Each technique has its own advantages and disadvantages, affecting the final properties of the shaped materials.

MATERIALS ADVANCES (2021)

Review Environmental Sciences

A review on production of metal organic frameworks (MOF) for CO2 adsorption

Taravat Ghanbari et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Article Engineering, Environmental

Performance enhancement of CO2 capture adsorbents by UV treatment: The case of self-supported graphene oxide foam

Anish Mathai Varghese et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Review Green & Sustainable Science & Technology

CO2 capture adsorbents functionalized by amine ? bearing polymers: A review

Anish Mathai Varghese et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2020)

Review Chemistry, Multidisciplinary

Metal Organic Framework - Based Mixed Matrix Membranes for Carbon Dioxide Separation: Recent Advances and Future Directions

Vengatesan Muthukumaraswamy Rangaraj et al.

FRONTIERS IN CHEMISTRY (2020)

Article Engineering, Environmental

Functionalization effects on HKUST-1 and HKUST-1/graphene oxide hybrid adsorbents for hydrogen sulfide removal

Nidhika Bhoria et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Article Chemistry, Physical

Enhancing water stability of MIL-101(Cr) by doping Ni(II)

Shuying Qiu et al.

APPLIED SURFACE SCIENCE (2020)

Review Materials Science, Multidisciplinary

Downsizing metal-organic frameworks by bottom-up and top-down methods

Ken Aldren S. Usman et al.

NPG ASIA MATERIALS (2020)

Article Engineering, Environmental

Highly efficient SO3Ag-functionalized MIL-101(Cr) for adsorptive desulfurization of the gas stream: Experimental and DFT study

Alimohammad Pourreza et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Engineering, Chemical

Amine-functionalized MOFs@GO as filler in mixed matrix membrane for selective CO2 separation

Mingmin Jia et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Article Engineering, Chemical

CO2 sponge from plasma enhanced seeded growth of metal organic frameworks across carbon nanotube bucky-papers

Abedeh Gholidoust et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Review Chemistry, Multidisciplinary

Carbon capture and conversion using metal-organic frameworks and MOF-based materials

Meili Ding et al.

CHEMICAL SOCIETY REVIEWS (2019)

Review Chemistry, Multidisciplinary

Stability of amine-functionalized CO2 adsorbents: a multifaceted puzzle

Masoud Jahandar Lashaki et al.

CHEMICAL SOCIETY REVIEWS (2019)

Review Chemistry, Multidisciplinary

Defective Metal-Organic Frameworks

Stefano Dissegna et al.

ADVANCED MATERIALS (2018)

Article Engineering, Chemical

A MIL-101 Composite Doped with Porous Carbon from Tobacco Stem for Enhanced Acetone Uptake at Normal Temperature

Denghui Li et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

Article Chemistry, Inorganic & Nuclear

Cu- and Zr-based metal organic frameworks and their composites with graphene oxide for capture of acid gases at ambient temperature

Jeewan Pokhrel et al.

JOURNAL OF SOLID STATE CHEMISTRY (2018)

Article Materials Science, Multidisciplinary

Metal-organic framework/graphene oxide composite fillers in mixed-matrix membranes for CO2 separation

Stavroula Anastasiou et al.

MATERIALS CHEMISTRY AND PHYSICS (2018)

Article Chemistry, Applied

Ultrahigh adsorption capacities of carbon tetrachloride on MIL-101 and MIL-101/graphene oxide composites

Yue Zheng et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2018)

Review Chemistry, Inorganic & Nuclear

Shape engineering of metal-organic frameworks

Bardiya Valizadeh et al.

POLYHEDRON (2018)

Article Nanoscience & Nanotechnology

Dendrite Suppression Membranes for Rechargeable Zinc Batteries

Byoung-Sun Lee et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Review Chemistry, Physical

Metal-Organic Frameworks for Carbon Dioxide Capture and Methane Storage

Yichao Lin et al.

ADVANCED ENERGY MATERIALS (2017)

Article Engineering, Chemical

Embedding Graphene Nanoplates into MIL-101(Cr) Pores: Synthesis, Characterization, and CO2 Adsorption Studies

Sina Pourebrahimi et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Article Engineering, Chemical

Gas separation with mixed matrix membranes obtained from MOF UiO-66-graphite oxide hybrids

Sonia Castarlenas et al.

JOURNAL OF MEMBRANE SCIENCE (2017)

Article Chemistry, Applied

Enhanced adsorption of rubidium ion by a phenol@MIL-101(Cr) composite material

Yaoyao Fang et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2017)

Review Chemistry, Multidisciplinary

Carbon Dioxide Capture Adsorbents: Chemistry and Methods

Hasmukh A. Patel et al.

CHEMSUSCHEM (2017)

Article Engineering, Environmental

MOF-74 and UTSA-16 film growth on monolithic structures and their CO2 adsorption performance

Fateme Rezaei et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Review Chemistry, Multidisciplinary

Amine-functionalized metal-organic frameworks: structure, synthesis and applications

Yichao Lin et al.

RSC ADVANCES (2016)

Article Chemistry, Physical

Engineering the surface of a new class of adsorbents: Metal-organic framework/graphite oxide composites

Camille Petit et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)

Review Chemistry, Multidisciplinary

Microporous carbonaceous adsorbents for CO2 separation via selective adsorption

Yunfeng Zhao et al.

RSC ADVANCES (2015)

Article Engineering, Environmental

Synthesis and adsorption performance of MIL-101(Cr)/graphite oxide composites with high capacities of n-hexane

Xuejiao Sun et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Article Engineering, Chemical

Simulation and Optimization of a Dual-Adsorbent, Two-Bed Vacuum Swing Adsorption Process for CO2 Capture from Wet Flue Gas

Shreenath Krishnamurthy et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Article Chemistry, Physical

A novel MOF/graphene oxide composite GrO@MIL-101 with high adsorption capacity for acetone

Xin Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Chemistry, Multidisciplinary

Nanosized Cu-MOFs induced by graphene oxide and enhanced gas storage capacity

Shuang Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Article Engineering, Environmental

Development of MWCNT@MIL-101 hybrid composite with enhanced adsorption capacity for carbon dioxide

Mansoor Anbia et al.

CHEMICAL ENGINEERING JOURNAL (2012)

Review Chemistry, Multidisciplinary

Progress in adsorption-based CO2 capture by metal-organic frameworks

Jian Liu et al.

CHEMICAL SOCIETY REVIEWS (2012)

Article Chemistry, Multidisciplinary

Syntheses, Characterizations and Adsorption Properties of MIL-101/Graphene Oxide Composites

Liu Xiaoqing et al.

CHINESE JOURNAL OF CHEMISTRY (2012)

Article Chemistry, Inorganic & Nuclear

Exploring the coordination chemistry of MOF-graphite oxide composites and their applications as adsorbents

Camille Petit et al.

DALTON TRANSACTIONS (2012)

Article Chemistry, Applied

Enhancement of CO2 adsorption on nanoporous chromium terephthalate (MIL-101) by amine modification

Mansoor Anbia et al.

JOURNAL OF NATURAL GAS CHEMISTRY (2012)

Article Chemistry, Physical

MOF/graphite oxide hybrid materials: exploring the new concept of adsorbents and catalysts

Teresa J. Bandosz et al.

ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY (2011)

Article Chemistry, Physical

Enhanced hydrogen sorption in single walled carbon nanotube incorporated MIL-101 composite metal-organic framework

K. P. Prasanth et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Chemistry, Multidisciplinary

MOF-Graphite Oxide Composites: Combining the Uniqueness of Graphene Layers and Metal-Organic Frameworks

Camille Petit et al.

ADVANCED MATERIALS (2009)

Article Chemistry, Multidisciplinary

Strong CO2 Binding in a Water-Stable, Triazolate-Bridged Metal-Organic Framework Functionalized with Ethylenediamine

Aude Demessence et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Article Chemistry, Applied

High pressure methane adsorption in the metal-organic frameworks Cu3(btc)2, Zn2(bdc)2dabco, and Cr3F(H2O)2O(bdc)3

Irena Senkovska et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2008)

Article Chemistry, Physical

Improved hydrogen storage in the modified metal-organic frameworks by hydrogen spillover effect

Ying-Ya Liu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2007)