Related references
Note: Only part of the references are listed.
Article
Engineering, Environmental
Wenhua Cheng et al.
Summary: We report a novel Zn/Ti dual concentration-gradients surface modification strategy for Li-rich layered oxides (LLOs) cathode materials. The strategy induces the formation of functionalized surfaces and stabilizes the structure, improving cycling performance and redox kinetics. The synergistic effect of double ion co-doping stabilizes the surface structure, improves the redox kinetics, and mitigates the degradation of electrochemical performance. Capacity retention increased by 24.1% compared to pristine LLOs after 150 cycles at 0.5 C.
CHEMICAL ENGINEERING JOURNAL
(2023)
Article
Engineering, Environmental
Zhi Li et al.
Summary: This paper proposes a strategy to improve the reversibility and structural stability of Li-rich cathode materials by introducing a spinel-layered coherent structure and S-anions. Experimental results confirm that the strategy enhances the reversible discharge capacity and initial Coulombic efficiency. The optimized material exhibits high reversible discharge capacity and good cyclic performance.
CHEMICAL ENGINEERING JOURNAL
(2023)
Review
Chemistry, Multidisciplinary
Xiaoxia Gou et al.
Summary: This review summarizes the in situ surface reconstruction strategies of lithium-rich manganese-based layered oxides (LROs). It provides an overview of LROs and discusses the surface challenges they face. Emphasis is placed on in situ self-reconstruction strategies to alleviate the performance degradation of LROs, with a focus on synthesis and characterization methods and the role they play in stabilizing the structures. Finally, prospects for precise/large scale preparations, interphase design, and in-operando characterization approaches for the commercialization of LROs are provided.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Yu-Jie Guo et al.
Summary: Chemical modification of electrode materials by heteroatom dopants is crucial for improving storage performance in rechargeable batteries. This study investigates the competitive doping chemistry of boron and aluminum in nickel-rich cathode materials. The atomic radii difference between B and Al leads to different spatial configurations of bonding with lattice oxygen. The findings provide insights into stabilizing the structural evolution and surface chemistry of the cathode.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Review
Energy & Fuels
Xiaolong Bi et al.
Summary: This paper introduces the structure, characteristics, and problems of poly-anionic Li2FeSiO4 material, proposes improvement methods, discusses various factors affecting the performance of materials, and provides prospects for future development.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
(2022)
Article
Chemistry, Physical
Yanchen Liu et al.
Summary: The hierarchical yolk-shell structured Li1.2Mn0.54Ni0.13Co0.13O2 cathode shows an initial coulombic efficiency of 85.8% and outstanding capacity retention rates of 89.1% after cycling at 2.0 C for 200 cycles. After cycling at 10.0 C for 500 cycles, the capacity retention rate is 93.8%, and for 1,000 cycles, it is 85.2%.
Article
Chemistry, Multidisciplinary
Yajing Wang et al.
Summary: This study investigated the use of beta-carotene as a scavenging molecule to construct a protective layer at the cathode-electrolyte interface. The results demonstrated that beta-carotene effectively controlled active oxygen species, improved the thermal stability of the electrolyte, and provided outstanding cycle stability for lithium-rich cathode materials.
Review
Chemistry, Multidisciplinary
Sebastian P. Kuehn et al.
Summary: The development of high-performing lithium-based batteries requires a thorough understanding of the reactivity at the electrode-liquid electrolyte interface and its impact on overall performance and safety. This review focuses on lithium-based cell chemistries and highlights the less understood electrolyte decomposition chemistry and the physicochemical and electrochemical properties of cathode electrolyte interphase (CEI) formation and evolution at the positive electrode material surface and sub-surfaces.
ADVANCED MATERIALS INTERFACES
(2022)
Article
Chemistry, Multidisciplinary
Weitao He et al.
Summary: By constructing a coherent near-zero-strain interphase on the grain boundaries of cathode secondary particles using the reactive infiltration method (RIM), infusing LiAlO2 material, this study demonstrates enhanced electrochemical cyclability, rate capability, and industrial calendaring performance of lithium-rich, manganese-based layered oxides, marking a significant step toward commercial implementation.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Jianwei Qiao et al.
Summary: This work demonstrates the significant improvement and stabilization of the photoluminescence quantum efficiency of europium-activated calcium oxide NIR phosphor, resulting in record-high external quantum efficiency and better thermal stability at LED operating temperatures. The developed NIR-LEDs exhibit record photoelectric efficiency and output power.
ADVANCED MATERIALS
(2022)
Review
Chemistry, Multidisciplinary
Jingwei Xiang et al.
Summary: This review focuses on the key links in the development of high-voltage cathode materials from the lab to industrialization. It discusses the failure mechanisms, optimization strategies, cost management, safety assessment, practical battery-performance evaluation, and sustainability of battery technologies. The tough challenges and promising strategies for the commercialization of high-voltage cathode materials are summarized to promote the large-scale application of LIBs with high energy densities.
ADVANCED MATERIALS
(2022)
Article
Engineering, Environmental
Jie Mei et al.
Summary: Multi-strategy synergistic Li1.2Mn0.54Ni0.13Co0.13O2 cathode materials with flourine-doping and surface coating of oxygen vacancy bearing CeO2 have been successfully prepared. The modified cathode materials exhibit improved cycling stability and restrained voltage attenuation compared to pristine LLO. This work demonstrates the effectiveness of multi-strategy synergy for enhancing the electrochemical performance of Li-rich layered oxides.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Engineering, Environmental
Hang Dong et al.
Summary: In this study, a facile fluorine glaze modification method is proposed to improve the performance of nickel-rich layered cathode, preventing grain cracking and surface collapse, and promoting lithium-ion transport.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Hieu Quang Pham et al.
Summary: Alternatives to LR-NCMs are being sought due to their structural transformation and toxic Co content limitations. LNFM, a Co-free and low-cost Li-rich cathode material, shows better surface structural stability and improved electrochemical performance.
JOURNAL OF POWER SOURCES
(2022)
Article
Chemistry, Multidisciplinary
Fei Cao et al.
Summary: By introducing antimony (Sb) ions, the migration of manganese ions can be effectively inhibited and the structure can be stabilized, resulting in higher discharge specific capacity and energy density in lithium-ion batteries.
Article
Chemistry, Multidisciplinary
Jiliang Wu et al.
Summary: The use of HEPES treatment and heat treatment can improve the performance of LLO materials by creating oxygen vacancies and spinel phase coating. The HEPES-treated LLO material shows excellent performance in terms of coulombic efficiency, discharge capacity, rate performance, and cycling stability after optimization.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2022)
Article
Chemistry, Physical
Chunxiao Zhang et al.
Summary: This study proposes a La/Al co-doping strategy to address the irreversibility of anionic redox reactions by tuning the electronic structure. The co-doped LMNLAO cathode exhibits outstanding cycling stability with a capacity retention of 93.6% after 200 cycles.
ENERGY STORAGE MATERIALS
(2022)
Article
Nanoscience & Nanotechnology
Zhe Yang et al.
Summary: This study successfully addresses the issues of voltage hysteresis and capacity attenuation in manganese-based cathode materials by controlling the formation of ordered Li-Mn superstructures. It also reduces the generation of reactive oxygen species and provides effective ideas for designing various superstructures and utilizing anionic redox.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Physical
Xianggang Gao et al.
Summary: This study presents a surface engineering strategy using NH4BF4 treatment to integrate spinel phase, oxygen vacancies, and dual-element (B and F) doping on the LRMO surface, leading to improved initial coulombic efficiency and capacity retention. The enhanced performance is attributed to the removal of surface labile oxygen, promotion of Li thorn diffusion kinetic, and stabilization of the surface structure.
MATERIALS TODAY ENERGY
(2022)
Article
Chemistry, Applied
Kanghui Hu et al.
Summary: The study proposes an integrative approach to construct a lithium-ion battery cathode material by doping 3d iron ions and constructing a Li5FeO4 shell to capture oxygen, prevent side reactions, and enhance interface stability. The improved cathode exhibits high reversible capacity and excellent cycle performance.
JOURNAL OF ENERGY CHEMISTRY
(2022)
Article
Chemistry, Physical
Tao Li et al.
Summary: In this study, a fluorinated graphene-scaffolded Li-rich manganese-based layered oxide (LRMLO@FG) was prepared to enhance oxygen redox stabilization and suppress lattice oxygen evolution. The LRMLO@FG electrode retained more lattice oxygen (O2-) and a higher proportion of Mn4+ after cycling, leading to improved cycling stability.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Chao Huang et al.
Summary: In this study, magnesiuMg-doped lithium-rich manganese-based layered oxides (LRMO) was synthesized and it was found that Mg2+ mainly replaces lithium ions in the oxide and forms a more stable lattice structure. The doped material exhibits excellent electrochemical performance, including high initial Coulombic efficiency, enhanced specific capacity, good cycling performance, and thermal stability.
MATERIALS TODAY ENERGY
(2022)
Article
Engineering, Environmental
Murugan Vivekanantha et al.
Summary: In this study, the researchers investigated the effect of increasing Ni content and doping Na on the electrochemical properties of layered Li-rich oxide cathodes. The results showed that increasing Ni content improved the capacity retention but negatively affected the rate capability. Doping Na in the Li layer further enhanced the rate capability and voltage retention of the Ni excess cathodes.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Multidisciplinary
Juhyun Oh et al.
Summary: This study reveals that overcharging induces phase heterogeneity and deformation in the cathodes of lithium-ion batteries. It also provides insights into the crack development mechanism, highlighting the importance of addressing the issues of overcharging.
Article
Chemistry, Physical
Jun Chen et al.
Summary: This study presents a rational design of the Li(1.2)Mn(0.5)4Ni(0.13)Co(0.13)O(2) cathode material with amorphous CoxB coating (CB-LRM) to address the capacity/voltage degradation issue. By inducing band coherency through interface-reconstruction and providing interface shielding effects with the amorphous coating layer, lattice oxygen loss is mitigated and electrode corrosion is prevented. The designed CB-LRM cathode exhibits excellent cycle stability and improved voltage degradation, highlighting its potential for rational design of high-energy-density electrode materials.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Chaoliang Zheng et al.
Summary: Coating the surface of lithium-rich cathode with completely cyclized polyacrylonitrile can alleviate capacity decay and voltage hysteresis, leading to improved electrochemical performance.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Chemistry, Multidisciplinary
Kosuke Kawai et al.
Summary: Integrating anionic-redox with cationic-redox is a promising strategy, but hysteresis is a challenge in oxygen-redox cathodes. In this study, nonpolarizing and polarizing oxygen-redox reactions are found to coexist and compete in a specific material. Preventing the polarizing reaction is crucial for achieving nonpolarizing and energy-efficient oxygen-redox reactions.
ENERGY & ENVIRONMENTAL SCIENCE
(2022)
Review
Chemistry, Multidisciplinary
Shuoqing Zhao et al.
Summary: Layered lithium-rich cathode materials with high theoretical specific capacity have regained interest due to the increasing reliance on high-energy-density lithium-ion batteries. Research progress on the structure characterization and reaction mechanisms of these materials has been reviewed, focusing on both cationic and anionic redox reactions. The future development of lithium-rich cathode materials for next-generation lithium-ion batteries faces opportunities and challenges.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Chemistry, Physical
Haoxiang Zhuo et al.
Summary: Through atomic-level observation, complex local structures within Li2MnO3 particles were discovered, significantly impacting the electrochemical and oxygen redox behavior of LRMO. These micro-structures offer a more comprehensive understanding of LRMO under practical situations, crucial for future modifications and applications of LRMO cathode materials.
Article
Chemistry, Physical
Shuoqing Zhao et al.
Summary: The article summarizes various strategies for improving the performance of layered lithium-rich cathode materials for next-generation high-energy-density lithium-ion batteries. These strategies include surface engineering, elemental doping, composition optimization, structure engineering, and electrolyte additives, with emphasis on the effect and functional mechanism of corresponding techniques. Opportunities and challenges for designing high-performance lithium-rich cathode materials and bridging the gap between laboratory and practical applications are also discussed.
ENERGY STORAGE MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Dong Luo et al.
Summary: The study developed a Ti-based surface integrated layer and bulk doping to improve the voltage and capacity stability of high-energy-density lithium-rich layered oxides. Experimental results showed that this method effectively suppressed surface structure evolution and interfacial reactions, enhancing battery cycling performance.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Physical
Vasu Shanmugam et al.
Summary: The study demonstrates a novel carbon encapsulation method to improve the performance of lithium-ion battery cathode material Li1.15Ni0.23Co0.08Mn0.54O2, enhancing cycling stability and energy density.
JOURNAL OF POWER SOURCES
(2021)
Article
Energy & Fuels
Robert A. House et al.
Summary: This study explores the mechanisms and impacts of oxygen redox in lithium-ion batteries, proposing a unified model to reduce instability caused by oxygen redox and provide strategies for achieving more reversible, high energy density cathodes.
Article
Nanoscience & Nanotechnology
Panawan Vanaphuti et al.
Summary: The study successfully integrated Na/F co-doping and AlF3 coating on LMR cathode materials to enhance their electrochemical performance and ionic conductivity, while alleviating structural degradation and metal dissolution issues. This represents a new strategy to improve structural homogeneity and moves closer to commercial viability.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Multidisciplinary
Xiaokai Ding et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2020)
Article
Multidisciplinary Sciences
Robert A. House et al.
Article
Chemistry, Physical
Chunxiao Zhang et al.
Article
Nanoscience & Nanotechnology
Yuefeng Su et al.
ACS APPLIED MATERIALS & INTERFACES
(2020)
Article
Chemistry, Multidisciplinary
Dong Luo et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2020)
Article
Multidisciplinary Sciences
Wei Liu et al.
NATURE COMMUNICATIONS
(2020)
Article
Chemistry, Physical
Enyue Zhao et al.
ENERGY STORAGE MATERIALS
(2020)
Article
Engineering, Environmental
Lun Ku et al.
CHEMICAL ENGINEERING JOURNAL
(2019)
Article
Chemistry, Physical
Zhe Huang et al.
JOURNAL OF POWER SOURCES
(2019)
Article
Chemistry, Physical
Andrew J. Naylor et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2019)
Review
Chemistry, Multidisciplinary
Wen Liu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2015)
Article
Chemistry, Physical
Chitturi Venkateswara Rao et al.
JOURNAL OF PHYSICAL CHEMISTRY C
(2014)
