☆ 4.7 Article

Micro-welding of sapphire and metal by femtosecond laser

CERAMICS INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

Ultrasonic-assisted soldering of sapphire through metallic transition layers of Al and Zn using Sn-xZn-2Al solder alloys

Xinran Ma et al.

Summary: Ultrasonic-assisted soldering, particularly for the joining of ceramics, shows promise in the electrical industry. This study investigated the soldering of sapphire under a short ultrasonic action using Sn-xZn-2Al solder alloys. The microstructures of the interfacial transition layers were analyzed, revealing the formation of metallic transition layers and three distinct interfacial structures. The selective and asynchronous adsorption of Al and Zn in the solder alloys during ultrasonic action resulted in the formation of Al atomic layers, Zn enrichment layers, and Zn nanocrystalline clusters. These transition structures strengthened the interfacial bonding and achieved joints with high shear strength.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Optics

Multi-scan picosecond laser welding of non-optical contact soda lime glass

Xianshi Jia et al.

Summary: Nowadays, ultrafast laser welding is widely used in chip labs, microelectronic systems, and micro-medical implantable devices. The challenge lies in welding non-optical contact transparent materials, which has been addressed by spatially and/or temporally shaping the laser under single scanning. In this study, a multi-scan picosecond laser welding method is adopted to weld non-optical soda lime glass with a 5 μm gap, achieving a welding region of 12×1 mm² and a welding strength of 6.5 MPa. The optimal welding parameters are determined and the proposed method offers a new technical solution for practical application of ultrafast laser welding.

OPTICS AND LASER TECHNOLOGY (2023)

Add to Collection

Article Optics

Study of the dynamics of material removal processes in combined pulse laser drilling of alumina ceramic

Xianshi Jia et al.

Summary: Combined pulse laser (CPL) is a reliable tool for high-quality and high-efficiency material processing. The nanosecond laser can improve the drilling performance of the millisecond laser by increasing the laser absorption or improving the sputtering of the melt. However, the dynamics of material removal processes in CPL drilling have not been systematically investigated.

OPTICS AND LASER TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Ceramics

Microstructure evolution and interfacial bonding mechanisms of ultrasonically soldered sapphire/Al dissimilar joints using Sn-based solders

Jiale Lv et al.

Summary: In this study, sapphire and 5A06 Al were ultrasonically soldered using different solders, and the microstructure and mechanical properties of the joints were investigated. The interfacial bonding mechanism of different solders was analyzed, and it was found that the use of composite solders can eliminate cracks in the solder joint and form a more uniform solder seam structure.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Triple-Scale Superhydrophobic Surface with Excellent Anti-Icing and Icephobic Performance via Ultrafast Laser Hybrid Fabrication

Rui Pan et al.

Summary: A new triple-scale micro/nanostructured superhydrophobic surface designed via ultrafast laser ablation and chemical oxidation exhibits excellent anti-icing and icephobic properties, with low ice adhesion strength and outstanding resistance to high humidity. The surface structure combines periodical microcone arrays, densely grown nanograsses, and dispersedly distributed microflowers, providing good Cassie state stability and preventing ice and water accumulation effectively.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Crystallization behaviour of 25Bi2O3-75B2O3 glass braze and strengthening mechanism of crystallization-reinforced sapphire/25Bi2O3-75B2O3/sapphire joints

Wei Guo et al.

Summary: In this study, borate based glass was successfully used as a braze to join sapphire, demonstrating outstanding glass-forming ability and excellent wettability on the surface of sapphire. The joint strength varied with different brazing temperatures and times, with the maximum strength achieved at 700 degrees C for 20 minutes. The research also found that the different joining parameters affected the joint structure and mechanical performance.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Engineering, Industrial

Bonding and strengthening mechanism on ultrasonic-assisted soldering of sapphire using Sn-3.5Ag-4Al solder

Yan Xu et al.

Summary: The study demonstrated the successful joining of sapphire with a Sn-3.5Ag-4Al solder using fast ultrasonic-assisted soldering technique. The enhancement of shear strength in the joints was attributed to the formation of a transition layer of amorphous Al2O3 at the interface, along with the presence of Al enrichment layer and Ag3Al2 phases. These structures contributed to the strong interfacial bonding, ultimately improving the mechanical properties of the joints.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Optics

High-quality welding of glass by a femtosecond laser assisted with silver nanofilm

Cong Wang et al.

Summary: A femtosecond laser welding method assisted by silver nanofilm for quartz glass is proposed to improve the welding strength of glass, and the welding strength was increased nearly 20% compared with direct femtosecond laser welding. Additionally, the proposed method can realize the welding process even at a lower laser power than the welding threshold.

APPLIED OPTICS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Mechanical properties of Invar 36 alloy additively manufactured by selective laser melting

Kai Wei et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

Add to Collection

Article Optics

Sapphire Fabry-Perot interferometer for high-temperature pressure sensing

Z. Wang et al.

APPLIED OPTICS (2020)

Add to Collection

Article Materials Science, Ceramics

Non-destructive measurement of residual stress distribution as a function of depth in sapphire/Ti6Al4V brazing joint via Raman spectra

Chun Li et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Low-temperature wetting of sapphire using Sn-Ti active solder alloys

Dekui Mu et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Evolution of interfacial structures and mechanical performance of sapphire and Sn-9Zn-2Al joints by ultrasound

Yan Xu et al.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Ultrafast laser welding of ceramics

E. H. Penilla et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrafast Laser Enabling Hierarchical Structures for Versatile Superhydrophobicity with Enhanced Cassie-Baxter Stability and Durability

Peixun Fan et al.

LANGMUIR (2019)

Add to Collection

Article Optics

Picosecond laser seal welding of glasses with a large gap

Hang Chen et al.

OPTICS EXPRESS (2019)

Add to Collection

Article Materials Science, Ceramics

New design of sapphire joints brazed with bismuth-borate glass

Wei Guo et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Optics

Microwelding of glass to silicon by green ultrafast laser pulses

Jiejuan Zhang et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Extremely high Cassie-Baxter state stability of superhydrophobic surfaces via precisely tunable dual-scale and triple-scale micro-nano structures

Rui Pan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Engineering, Industrial

Microstructure and mechanical performance of composite joints of sapphire by ultrasonic-assisted brazing

Cui Wei et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Analytical

Adhesive-Free Bonding of Monolithic Sapphire for Pressure Sensing in Extreme Environments

Jihaeng Yi

SENSORS (2018)

Add to Collection

Article Engineering, Industrial

Microstructural evolution in the braze joint of sapphire to Kovar alloy by Ti-Cu metallization layer

Chenglai Xin et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Ceramics

Microstructure and characterization of interfacial phases of sapphire/sapphire joint bonded using Bi2O3-B2O3-ZnO glass

Wei Guo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Shear Strength and Interfacial Toughness Characterization of Sapphire-Epoxy Interfaces for Nacre-Inspired Composites

Sebastian Behr et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of wavelength and pulse duration on laser micro-welding of monocrystalline silicon and glass

I. H. W. Nordin et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2016)

Add to Collection

Article Materials Science, Ceramics

Metallization of Al2O3 ceramic by magnetron sputtering Ti/Mo bilayer thin films for robust brazing to Kovar alloy

Chenglai Xin et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Crystallography

World's largest sapphire for many applications

Chandra P. Khattak et al.

JOURNAL OF CRYSTAL GROWTH (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Deformation Behavior of Fe-36Ni Steel during Cryogenic (123–173 K) Rolling

Jian-jun ZHENG et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2016)

Add to Collection

Review Optics

[INVITED] Laser welding of glasses at high repetition rates - Fundamentals and prospects

Soeren Richter et al.

OPTICS AND LASER TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural evolution and characterisation of interfacial phases in Al2O3/Ag-Cu-Ti/Al2O3 braze joints

Majed Ali et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Toward laser welding of glasses without optical contacting

S. Richter et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2015)

Add to Collection

Article Materials Science, Ceramics

Effects of electric field on interfacial microstructure and shear strength of diffusion bonded α-Al2O3/Ti joints

Rui Pan et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

Add to Collection

Article Optics

Avoiding the requirement for pre-existing optical contact during picosecond laser glass-to-lass welding

Jianyong Chen et al.

OPTICS EXPRESS (2015)

Add to Collection

Article Acoustics

Building a nano-crystalline α-alumina layer at a liquid metal/sapphire interface by ultrasound

Wei Cui et al.

ULTRASONICS SONOCHEMISTRY (2015)

Add to Collection

Article Optics

Direct welding of glass and metal by 1 kHz femtosecond laser pulses

Guodong Zhang et al.

APPLIED OPTICS (2015)

Add to Collection

Article Materials Science, Ceramics

Wet Green-State Joining of Alumina Ceramics Without Paste

Xiang Peng et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Vacuum brazing of sapphire with Inconel 600 using Cu/Ni porous composite interlayer for gas pressure sensor application

Tuan Zaharinie et al.

MATERIALS & DESIGN (2014)

Add to Collection

Article Optics

Crack-free conditions in welding of glass by ultrashort laser pulse

Isamu Miyamoto et al.

OPTICS EXPRESS (2013)

Add to Collection

Article Crystallography

Modern trends in crystal growth and new applications of sapphire

Mark S. Akselrod et al.

JOURNAL OF CRYSTAL GROWTH (2012)

Add to Collection

Article Physics, Applied

Mechanism of heat-modification inside a glass after irradiation with high-repetition rate femtosecond laser pulses

Masahiro Shimizu et al.

JOURNAL OF APPLIED PHYSICS (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of process parameters on the melting ratio in overlap pulsed laser welding

J. Sabbaghzadeh et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2008)

Add to Collection

Article Physics, Applied

Space-selective laser joining of dissimilar transparent materials using femtosecond laser pulses

Wataru Watanabe et al.

APPLIED PHYSICS LETTERS (2006)

Add to Collection

Article Physics, Applied

Welding of transparent materials using femtosecond laser pulses

T Tamaki et al.

JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.