Mechanistic study in sulfur-carbon co-modification on Li2FeSiO4 for lithium-ion batteries

Lithium iron silicate (Li2FeSiO4) has high theoretical capacity of 332 mAh & BULL;g-1 upon full extraction of two lithium ions, which is accompanied by high delithiation potential and large volume change. Sulfur modification could be an effective approach for stabilizing Li2FeSiO4 cathodes. A series of carbon-coated Li2FeSiO4 samples were prepared through a hydrothermal and solid-state reaction route at a fixed sucrose content (14 wt% carbon) with varying amounts of sublimed sulfur at 5, 10, 15, 20 and 25 at%. The crystal structures, chemical compositions, microstructures and electrochemical performances of the differently sulfur-modified Li2FeSiO4/C were systematically investigated. The sulfur-carbon co-modifications and possible existing chemical states of sulfur are discussed in terms of the surface and near-bulk modifications. It was found that all the samples exhibited a monoclinic P21 structural Li2FeSiO4, while the sulfur contents over 10 at% formed impure phases such as iron sulfides (Fe1-xS) and lithium metasilicate (Li2SiO3). Furthermore, three types of sulfur states could be found when sulfur and carbon were added simultaneously into Li2FeSiO4. The surfaces were predominated by S-C and S-O-C, indicating the sulfur-carbon co-modification, which would reduce the resistance at the solid/electrode interface (SEI) but increase the charge transfer resistance. Near the bulk, the enhanced interactions between sulfur and iron S-Fe( S) or sulfur and silicon S-Si( O) may lead to the formation of possible impurities or oxygen substitution by sulfur. The former is detrimental as the effective sulfur amount is reduced, while the latter is beneficial to improve specific capacity and cycle stability. The overall performance of sulfur-carbon co modified sample is influenced complicatedly by the sulfur content. The best initial discharge capacity of 152.3 mAh & BULL;g-1 was obtained with 5 at% sulfur modification, while the best overall performance, showing a typical warm-up response and good cycle stability, was observed with 15 at% sulfur modification.

Automated summary

Sulfur modification can effectively stabilize Li2FeSiO4 cathodes. In this study, a series of carbon-coated Li2FeSiO4 samples with different sulfur contents were prepared and their crystal structures, chemical compositions, microstructures, and electrochemical performances were systematically studied. It was found that sulfur contents over 10% formed impure phases and three types of sulfur states could be found when sulfur and carbon were added to Li2FeSiO4. The overall performance of sulfur-carbon co modified sample is influenced complicatedly by the sulfur content, and the best overall performance was observed with 15% sulfur modification.