☆ 4.7 Article

Effect of ultra accurate control of electrolyte temperature on the performance of micro arc oxidation ceramic coatings

CERAMICS INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Physics, Multidisciplinary

Design and development of type-1 FBG based high temperature sensor

R. Y. M. Khan et al.

Summary: Thermal metrology is crucial for optimizing high-energy industrial processes, and this study presents the design and development of a double thimble type standard type-1 fiber Bragg grating (FBG) high temperature sensing probe. Two probes, named probe-1 and probe-2, were developed by encapsulating type-1 FBGs in stainless steel thimbles with ceramic filling. The probes were tested in a high temperature box furnace and their responses were analyzed. The optimized probe-2 demonstrated a lifetime of approximately 6 years with negligible hysteresis and repeatability.

PHYSICA SCRIPTA (2023)

Add to Collection

Article Materials Science, Ceramics

Polyvinyl alcohol/polyethylene glycol composite hydrogel parceling on aluminum: Toward more robust micro-arc oxidation coatings

Endong Jia et al.

Summary: Micro-arc oxidation (MAO) technology is utilized to enhance the wear and corrosion resistance of aluminum (Al) by forming a dense ceramic oxide coating on its surface. In this study, a hydrogel containing polyvinyl alcohol (PVA) and polyethylene glycol (PEG) was used as a pre-treatment to improve the properties of the MAO coating (Al-MAO-GEL) on Al disk. The coated Al-MAO-GEL showed improved tribological properties and corrosion resistance, indicating its protective nature.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Computer Science, Hardware & Architecture

Robotic Arm controlled using IoT application

H. Kareemullah et al.

Summary: Work-from-home policies have boosted the development of IoT applications for remote monitoring and management. This led to the creation of a remotely controlled robotic arm, the B-rover, which allows technicians to reduce direct contact with hazardous environments. It has various applications, such as health monitoring and medication delivery to COVID patients.

COMPUTERS & ELECTRICAL ENGINEERING (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of ZrO2 ceramic coatings on ZrH1.8 prepared in different electrolytes by micro-arc oxidation

Zhi-Gang Wang et al.

Summary: ZrO2 ceramic coatings were prepared on the surface of ZrH1.8 using micro-arc oxidation technique. The coatings were characterized for their microstructure, chemical composition and anti-permeation effect. It was found that the coatings prepared in phosphate electrolyte were more compact and exhibited better resistance to hydrogen permeation.

RARE METALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Unsteady 3D heat transport in hybrid nanofluid containing brick shaped ceria and zinc-oxide nanocomposites with heat source/sink

Iftikhar Ahmad et al.

Summary: In the field of nano-composites, hybrid nano-fluids, such as the combination of ceria and zinc-oxide nanocomposites, have shown remarkable applications due to their ability to enhance thermal conductivity. This study investigates the thermal transport characteristics of a water-driven hybrid nanofluid with brick-shaped nanocomposites and finds that the addition of ceria and zinc-oxide nanoparticles significantly improves the rate of heat transfer.

NANOCOMPOSITES (2022)

Add to Collection

Article Polymer Science

Organic solvents enhance polyvinyl alcohol/polyethylene glycol self-healing hydrogels for artificial cartilage

Zishuo Ye et al.

Summary: In this study, the mechanical and tribological properties of polyvinyl alcohol (PVA) hydrogels were improved by introducing polyethylene glycol (PEG) and using organic solvent dehydration treatment. The network structure and mechanical properties of PVA/PEG gels were effectively enhanced by the organic solvent dehydration method. Furthermore, the wear rate of the friction pair was reduced by the organic solvent dehydration treatment, demonstrating improved wear resistance.

POLYMERS FOR ADVANCED TECHNOLOGIES (2022)

Add to Collection

Article Instruments & Instrumentation

Telemedicine Medical Ultrasonic System Based on Robotic Arm

Cheng-Yan Siao et al.

Summary: In traditional medical ultrasound treatment, a doctor needs to manually manipulate the ultrasound scanner. However, this study introduces a robotic arm and a remote control system to enable doctors to operate the ultrasound scanner from a distance without direct contact with patients.

SENSORS AND MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

Microstructure and tribological behavior of plasma spray Ni60 alloy coating deposited on ZL109 aluminum alloy substrate

Bing -yuan Han et al.

Summary: This paper investigated the microstructure and tribological behavior of Ni60 alloy coating prepared by plasma spray on the surface of aluminum alloy. The results showed that the coating thickness and spraying power had an impact on the coating performance, with multiple phases and materials present in the coating. The coating had enhanced hardness and oxidation resistance, but also had a higher porosity. Under high load, the coating exhibited increased wear and friction coefficient. Moderate spraying power improved the coating's wear resistance.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Chemistry, Physical

The effect of adding polyethylene glycol to electrolyte solution on micro-arc oxidation coating on pure aluminum

Changkai Wang et al.

Summary: By varying the concentration of polyethylene glycol (PEG) in electrolytes, the performance of ceramic coatings on pure aluminum surfaces can be improved, resulting in good wear and corrosion resistance, and the enhancement of metal's service life and application range.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Ceramics

Preparation and properties of wear-resistant carbonized-ceramic composite coating on pure aluminum surface

Zhonglei Shao et al.

Summary: A new composite coating was prepared on the surface of pure aluminum using micro-arc oxidation (MAO) technology and polyethylene glycol (PEG 400) carbonization technology. The composite coating showed improved wear resistance compared to the single MAO coating, reducing adhesive wear and abrasive wear of the aluminum substrate.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Micro-arc oxidation enhances the wear resistance and corrosion resistance of oil-water separating mesh

Bowen Xue et al.

Summary: Ceramic coatings were prepared on the surface of Al mesh using the micro-arc oxidation (MAO) method, which showed excellent wear resistance and corrosion resistance. The coating had a protective effect on salt spray corrosion and mass loss at high temperature, and improved the wear resistance of the aluminum mesh. After oil heating treatment, the MAO Al mesh maintained oleophilic and hydrophobic properties, making it suitable for oil-water separation. This method has a simple preparation process, low cost, and excellent performance, with wide applications in oil spill cleanup, wastewater treatment, and water purification.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Polymer Science

Effects of pressure on the cross-linking behavior of hyaluronic acid-functionalized boric acid cross-linked poly(vinyl alcohol) hydrogels

Feng Hu et al.

Summary: This study investigates the influence of pressure on the preparation of boric acid cross-linked poly(vinyl alcohol)/hyaluronic acid hydrogel and finds that centrifugal pressure treatment can change the state of the hydrogel and improve its surface hardness.

POLYMERS FOR ADVANCED TECHNOLOGIES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Different Concentrations of Nano-Cubic Boron Nitride on the Preparation of TiO2/Ti/Fe Composite Materials by Thermal Sprayed and Micro-Arc Oxidation

Chang-Chiun Huang et al.

Summary: This study introduced a composite material with thermal-sprayed titanium on AISI 1020 steel and added c-BN to enhance wear and corrosion resistance in the MAO process. Results showed that the composite coating with c-BN had higher hardness, lower surface roughness, and thicker coating thickness compared to the c-BN-free coating. Additionally, the Ti/MAO-BN coatings exhibited significantly improved corrosion and wear resistance, with Ti/MAO-BN9 performing the best among all tested concentrations.

MATERIALS TRANSACTIONS (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Corrosion-Fatigue Performance of Hard Anodized and MAO-Coated 2024-T3 and 7075-T6 Aerospace Al Alloys

Y. Madhavi et al.

Summary: In this study, micro-arc oxidation (MAO) coatings were deposited on shot peened high-strength aerospace aluminum alloys, namely 2024-T3 and 7075-T6. The corrosion-fatigue performance of bare, hard anodized, and SP + MAO coated Al alloys was evaluated, showing that the SP + MAO coatings have superior corrosion-fatigue life compared to the bare and hard anodized conditions.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2021)

Add to Collection

Article Engineering, Mechanical

Residual stress relaxation and duty cycle on high cycle fatigue life of micro-arc oxidation coated AA7075-T6 alloy

Weibing Dai et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

Add to Collection

Article Chemistry, Physical

Preparation and Corrosion Behavior in Marine Environment of MAO Coatings on Magnesium Alloy

Yuhong Yao et al.

MATERIALS (2020)

Add to Collection

Article Materials Science, Coatings & Films

Effects of honeycomb pretreatment on MAO coating fabricated on aluminum

Xiaowei Wei et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Evolution process of the plasma electrolytic oxidation (PEO) coating formed on aluminum in an alkaline sodium hexametaphosphate ((NaPO3)6) electrolyte

Dong-dong Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Materials Science, Coatings & Films

Preparation, characteristics and corrosion properties of α-Al2O3 coatings on 10B21 carbon steel by micro-arc oxidation

Yankun Li et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Surgery

Neurosurgical robotic arm drilling navigation system

Chung-Chih Lin et al.

INTERNATIONAL JOURNAL OF MEDICAL ROBOTICS AND COMPUTER ASSISTED SURGERY (2017)

Add to Collection

Article Chemistry, Physical

Self-healing Li-Al layered double hydroxide conversion coating modified with aspartic acid for 6N01 Al alloy

Caixia Zhang et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Chemistry, Analytical

Investigation of the electrochemical behaviour of AA1050 aluminium alloy in aqueous alkaline solutions using Dynamic Electrochemical Impedance Spectroscopy

Joanna Wysocka et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Preparation and photocatalytic activity of MAO-TiO2 films formed on titanium doped with V2O5 and Ag2O

N. Xiang et al.

MATERIALS TECHNOLOGY (2016)

Add to Collection

Article Instruments & Instrumentation

Influence of electrolyte temperature on properties and infrared emissivity of MAO ceramic coating on 6061 aluminum alloy

Mohannad M. S. Al Bosta et al.

INFRARED PHYSICS & TECHNOLOGY (2014)

Add to Collection

Article Thermodynamics

Accurate basis of comparison for convective heat transfer in nanofluids

Ehsan B. Haghighi et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Chemistry, Physical

Formation and characterization of wear-resistant PEO coatings formed on β-titanium alloy at different electrolyte temperatures

H. Habazaki et al.

APPLIED SURFACE SCIENCE (2012)

Add to Collection

Article Optics

Spectroscopic study of plasma during electrolytic oxidation of magnesium- and aluminium-alloy

J. Jovovic et al.

JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2012)

Add to Collection

Article Chemistry, Analytical

Hall Sensors for Extreme Temperatures

Jakub Jankowski et al.

SENSORS (2011)

Add to Collection

Article Materials Science, Coatings & Films

Influence of titania sol in the electrolyte on characteristics of the microarc oxidation coating formed on 2A70 aluminum alloy

Mingqi Tang et al.

SURFACE & COATINGS TECHNOLOGY (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Comparison of coating properties obtained by MAO on magnesium alloys in silicate and phytic acid electrolytes

R. F. Zhang et al.

CURRENT APPLIED PHYSICS (2010)

Add to Collection

Article Materials Science, Coatings & Films

Optical emission spectroscopy studies of discharge mechanism and plasma characteristics during plasma electrolytic oxidation of magnesium in different electrolytes

Li Wang et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Add to Collection

Article Chemistry, Physical

Influence of phytic acid concentration on coating properties obtained by MAO treatment on magnesium alloys

R. F. Zhang et al.

APPLIED SURFACE SCIENCE (2009)

Add to Collection

Article Thermodynamics

Nanofluids: Synthesis, Heat Conduction, and Extension

Liqiu Wang et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2009)

Add to Collection

Article Engineering, Industrial

Formation of ceramic alumina nanocomposite coatings on aluminium for enhanced corrosion resistance

V. Raj et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Influence of potential on the structure and properties of microarc oxidation coating on Mg alloy

Deng Shu-hao et al.

ANTI-CORROSION METHODS AND MATERIALS (2008)

Add to Collection

Article Materials Science, Coatings & Films

Friction characteristic of micro-arc oxidative Al2O3 coatings sliding against Si3N4 balls in various environments

Fei Zhou et al.

SURFACE & COATINGS TECHNOLOGY (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.