4.7 Article

Self-assembled La0.6Sr0.4FeO3-δ-La1.2Sr0.8NiO4+δ composite cathode for protonic ceramic fuel cells

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

The BaCe0.16Y0.04Fe0.8O3-δ nanocomposite: a new high-performance cobalt-free triple-conducting cathode for protonic ceramic fuel cells operating at reduced temperatures

Dan Zou et al.

Summary: Compared to conventional oxygen-ion-conducting solid oxide fuel cells, proton ceramic fuel cells show better performance at low temperatures. However, most proton ceramic fuel cells have lower power outputs due to the lack of suitable cathode materials. This study presents a cobalt-free triple-conducting perovskite-based nanocomposite as a highly active and stable cathode for proton ceramic fuel cells.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Physical

High-performance protonic ceramic fuel cell cathode using protophilic mixed ion and electron conducting material

Dingyue Hu et al.

Summary: This study introduces a novel PCFC cathode material, BSCFW, with excellent electrochemical and protonic properties conducive to PCFC application, showing superior stability and performance compared to current state-of-the-art cathode materials.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Multidisciplinary Sciences

Revitalizing interface in protonic ceramic cells by acid etch

Wenjuan Bian et al.

Summary: Researchers improved the electrochemical performance and stability of protonic ceramic fuel cells by acid treatment, enabling exceptional performance at lower temperatures.

NATURE (2022)

Article Materials Science, Ceramics

Evaluation of Cu-substituted La1.5Sr0.5NiO4+6 as air electrode for CO2 electrolysis in solid oxide electrolysis cells

Shun Wang et al.

Summary: The study investigates Cu-substituted La1.5Sr0.5NiO4+6 series materials as air electrodes for CO2 electrolysis. The results reveal that Cu substitution improves the catalytic activity, electronic conductivity, and oxygen exchange capacity of the electrodes, leading to enhanced charge transfer and oxygen ion diffusion. Additionally, Cu substitution enhances the stability of the cells, enabling the LSNCu0.25 air electrode to exhibit highly stable performance in CO2 electrolysis.

CERAMICS INTERNATIONAL (2022)

Article Electrochemistry

Evaluation of La2-x(Ca/Sr)xNi1-yFeyO4+δ (x=0.5, 0.6; y=0.4, 0.5) as cathodes for proton-conducting SOFC based on lanthanum tungstate

A. R. Gilev et al.

Summary: La2NiO4+delta, LCNF0604, LSNF0604, LSNF0605 and LSNF0504 compounds were synthesized by the citrate-nitrate technique and their phase purity was confirmed by X-ray powder diffraction. Electrochemical impedance spectroscopy studies showed that the polarization resistance decreased in the temperature range of 600-800 degrees C in wet air, with the order of LCNF0604>La2NiO4+delta>LSNF0504>LSNF0604>LSNF0605. The low frequency process was found to contribute significantly to the polarization resistance of the studied cells.

ELECTROCHIMICA ACTA (2022)

Article Chemistry, Multidisciplinary

Electrokinetic Insights into the Triple Ionic and Electronic Conductivity of a Novel Nanocomposite Functional Material for Protonic Ceramic Fuel Cells

Idris Temitope Bello et al.

Summary: Triple ionic and electronic conductivity (TIEC) in cathode materials for protonic ceramic fuel cells (PCFCs) can be achieved by strategic development of multiphase cathode materials. The cubic-rhombohedral TIEC nanocomposite material designed in this study exhibits enhanced oxygen vacancy concentration and proton defects formation and transport, with low enthalpy of protonation and good cell performance stability.

SMALL (2022)

Article Chemistry, Physical

A Sr and Ni doped Ruddlesden-Popper perovskite oxide La1.6Sr0.4Cu0.6Ni0.4O4+δ as a promising cathode for protonic ceramic fuel cells

Jiyang Ma et al.

Summary: This study presents a Sr and Ni dual doped Ruddlesden-Popper perovskite oxide, La1.6Sr0.4Cu0.6Ni0.4O4+delta (LSCN), with rich oxygen vacancies and good chemical/thermal compatibility with the electrolyte. The LSCN cathode showed promising electrochemical performance with peak power density of 1020 mWcm(-2) and excellent stability at 750 degrees C over a period of 100 hours, making it a potential cathode material for protonic ceramic fuel cells.

JOURNAL OF POWER SOURCES (2021)

Article Multidisciplinary Sciences

Thermal-expansion offset for high-performance fuel cell cathodes

Yuan Zhang et al.

Summary: This study demonstrates an approach to achieving full thermo-mechanical compatibility between the cathode and other cell components for solid oxide fuel cells. By introducing a thermal-expansion offset and using reactive sintering to form a composite electrode, the research shows high activity and excellent stability of the electrode. The introduction of reactive negative-thermal-expansion components may provide a general strategy for developing fully compatible and highly active electrodes for SOFCs.

NATURE (2021)

Article Nanoscience & Nanotechnology

Pr-Doping Motivating the Phase Transformation of the BaFeO3-δ Perovskite as a High-Performance Solid Oxide Fuel Cell Cathode

Yunjie Gou et al.

Summary: This study demonstrates an effective optimized strategy for designing high-performance cathodes by doping Pr into BaFeO3-delta perovskites, enhancing electrochemical activity and CO2 resistance. The appropriate content of Pr substitution increases the oxygen vacancy concentration, promotes reactions on the oxygen electrode, and shows excellent electrochemical performance.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Enhanced oxygen reduction reaction activity of BaCe0.2Fe0.8O3-8 cathode for proton-conducting solid oxide fuel cells via Pr-doping

Xin Zhou et al.

Summary: Pr-doped BaCe0.2Fe0.8O3-8 shows improved oxygen surface exchange kinetics and activity as a cobalt-free cathode material, leading to lower polarization resistance in proton-conducting solid oxide fuel cells.

JOURNAL OF POWER SOURCES (2021)

Article Engineering, Environmental

Nickel-doped BaCo0.4Fe0.4Zr0.1Y0.1O3-δ as a new high-performance cathode for both oxygen-ion and proton conducting fuel cells

Mingzhuang Liang et al.

Summary: By systematically investigating partial doping of different metal elements in BaCo0.4Fe0.4Zr0.1Y0.1O3-delta (BCFZY), Ba(Co0.4Fe0.4Zr0.1Y0.1)0.95Ni0.05O3-delta (BCFZYN) was found to exhibit the lowest polarization impedance and achieve high ORR activity. Nickel doping in BCFZYN improves oxygen mobility, surface exchange kinetics, and bulk oxygen ion and proton conductivity, leading to outstanding operational stability in SOFCs.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Electrochemical performance and distribution of relaxation times analysis of tungsten stabilized La0•5Sr0•5Fe0•9W0•1O3-d electrode for symmetric solid oxide fuel cells

Shuai Wang et al.

Summary: LSFW electrode shows good phase and structural stability under different atmospheres, low polarization resistance, and excellent performance at 800 degrees Celsius, indicating promising applications in solid oxide fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Review Chemistry, Inorganic & Nuclear

A review of current performance of rare earth metal-doped barium zirconate perovskite: The promising electrode and electrolyte material for the protonic ceramic fuel cells

Sefiu Abolaji Rasaki et al.

Summary: Rare-earth metal doped barium zirconate (RE+-BaZrO3) materials exhibit dual functions as electrodes and electrolytes in protonic ceramic fuel cells (PCFCs), with good electron-ion conductivity but facing challenges such as weak proton uptake and insufficient catalytic sites. Improvement in performance can be achieved through structural engineering and material modification.

PROGRESS IN SOLID STATE CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Building Ruddlesden-Popper and Single Perovskite Nanocomposites: A New Strategy to Develop High-Performance Cathode for Protonic Ceramic Fuel Cells

Huangang Shi et al.

Summary: A new strategy involving the formation of Ruddlesden-Popper (RP)-single perovskite (SP) nanocomposites has been introduced to enhance the cathodic performance of protonic ceramic fuel cells (PCFCs). The synergy between RP and SP in the nanocomposites improves oxygen reduction activity and proton conductivity, leading to significant performance improvements. Specifically, the integration of LSCF2.7 cathode and BZCY172 electrolyte results in an attractive peak power output of 391 mW cm(-2) at 600 degrees C.

SMALL (2021)

Article Chemistry, Multidisciplinary

A New In Situ Synthetic Triple-Conducting Core-Shell Electrode for Protonic Ceramic Fuel Cells

Chaoliang Geng et al.

Summary: This paper presents a novel heterostructure triple-conducting cathode SFN113@327, which demonstrates superior electrochemical performance compared with the single cathode SFN113, indicating its important significance in the field of protonic ceramic fuel cells.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Review Chemistry, Physical

Recent advances in layered Ln2NiO4+δ nickelates: fundamentals and prospects of their applications in protonic ceramic fuel and electrolysis cells

Artem P. Tarutin et al.

Summary: This work provides a comprehensive overview of layered nickelates as one of the most attractive oxygen electrode materials for protonic ceramic electrochemical cells. It emphasizes the unique advantages and research interests of these materials but points out the lack of in-depth reviews in the current literature.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Nanoscience & Nanotechnology

Boosting the Electrochemical Performance of Fe-Based Layered Double Perovskite Cathodes by Zn2+ Doping for Solid Oxide Fuel Cells

Rongzheng Ren et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Physical

Improving oxygen incorporation rate on (La0.6Sr0.4)0.98FeO3-δ via Pr2Ni1-xCuxO4+δ surface decoration

Mohamad Khoshkalam et al.

JOURNAL OF POWER SOURCES (2020)

Article Chemistry, Physical

High performance Ca-containing La2-xCaxNiO4+δ (0≤x≤0.75) cathode for proton-conducting solid oxide fuel cells

Chun-Ye Gu et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Physical

Exploring Ni(Mn1/3Cr2/3)2O4 spinel-based electrodes for solid oxide cells

Nanqi Duan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Electrochemistry

Cobalt-Free Perovskite Cathodes for Solid Oxide Fuel Cells

Siti Salwa Hashim et al.

CHEMELECTROCHEM (2019)

Article Chemistry, Physical

Surface recrystallization - an underestimated phenomenon affecting oxygen exchange activity

Dordije Tripkovic et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Chemistry, Physical

Oxygen transport phenomena in (La,Sr)2(Ni,Fe) O4 materials

A. R. Gilev et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Physical

Bismuth-doped La1.75Sr0.25NiO4+δ as a novel cathode material for solid oxide fuel cells

Zhesheng Zhu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Materials Science, Ceramics

Enhanced performance of La0.7Sr0.3Fe0.9Ni0.1O3 cathode by partial substitution with Ce

Liu Zhen Bian et al.

CERAMICS INTERNATIONAL (2017)

Article Electrochemistry

Electrochemical Performance of La1.5Sr0.5Ni1-xFexO4+δ Cathode for IT-SOFCs

Sha Yia et al.

ELECTROCHIMICA ACTA (2016)

Article Chemistry, Physical

An efficient electrocatalyst as cathode material for solid oxide fuel cells: BaFe0.95Sn0.05O3-δ

Feifei Dong et al.

JOURNAL OF POWER SOURCES (2016)

Article Multidisciplinary Sciences

Readily processed protonic ceramic fuel cells with high performance at low temperatures

Chuancheng Duan et al.

SCIENCE (2015)

Article Chemistry, Physical

A high performance cathode for proton conducting solid oxide fuel cells

Zhiquan Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Article Nanoscience & Nanotechnology

Bismuth Doped Lanthanum Ferrite Perovskites as Novel Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Mei Li et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Physical

Enhanced oxygen surface exchange of La2NiO4+δ by means of a thin surface layer of silver

Andreas Egger et al.

SOLID STATE IONICS (2014)

Article Agricultural Engineering

Glycerol oxidation in solid oxide fuel cells based on a Ni-perovskite electrocatalyst

Massimiliano Lo Faro et al.

BIOMASS & BIOENERGY (2011)

Article Chemistry, Multidisciplinary

Ba(Zr0.1Ce0.7Y0.2)O3-δ as an electrolyte for low-temperature solid-oxide fuel cells

Chendong Zuo et al.

ADVANCED MATERIALS (2006)

Article Multidisciplinary Sciences

A high-performance cathode for the next generation of solid-oxide fuel cells

ZP Shao et al.

NATURE (2004)