Related references
Note: Only part of the references are listed.A Review on Lignin-Based Phenolic Resin Adhesive
Xiaoyu Gong et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2022)
Wood mechanical densification: a review on processing
Yu Luan et al.
MATERIALS AND MANUFACTURING PROCESSES (2022)
Analysis of the Manufacturing Variables of Binderless Panels Made of Leaves of Olive Tree (Olea europaea L.) Pruning Waste
Antonio Ferrandez-Garcia et al.
AGRONOMY-BASEL (2022)
Densification of timber: a review on the process, material properties, and application
John Paul Cabral et al.
JOURNAL OF WOOD SCIENCE (2022)
Effects of Pressurized Superheated Steam Treatment on Dimensional Stability and Its Mechanisms in Surface-Compressed Wood
Zhiqiang Gao et al.
FORESTS (2022)
An investigation of thermal conductivity and sound absorption from binderless panels made of oil palm wood as bio-insulation materials
Indra Mawardi et al.
RESULTS IN ENGINEERING (2022)
The influence of thickness and final heat treatment on mechanical properties and dimensional stability of binderless fiberboards from steam exploded Arundo donax L
Federica Vitrone et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Thermal modification of wood-a review: chemical changes and hygroscopicity
Callum Hill et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Influence of steam explosion pre-treatment conditions on binder-less boards from hemp shives and wheat straw
Ramunas Tupciauskas et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Recent Advances on the Development of Protein-Based Adhesives for Wood Composite Materials-A Review
Nidal Del Valle Raydan et al.
MOLECULES (2021)
Utilization of Birch Bark as an Eco-Friendly Filler in Urea-Formaldehyde Adhesives for Plywood Manufacturing
Roman Reh et al.
POLYMERS (2021)
Lignin and Lignin-Derived Compounds for Wood Applications-A Review
Johannes Karthaeuser et al.
MOLECULES (2021)
Binderless fiberboards for sustainable construction. Materials, production methods and applications
Federica Vitrone et al.
JOURNAL OF BUILDING ENGINEERING (2021)
Binderless Thermal Insulation Panels Made of Spruce Bark Fibres
Jakob Gosswald et al.
POLYMERS (2021)
Steam treatment to enhance rice straw binderless board focusing hemicellulose and cellulose decomposition products
Yoko Kurokochi et al.
JOURNAL OF WOOD SCIENCE (2020)
Comparison of binderless boards produced with different tissues of totora (Schoenoplectus californicus (C.A. Mey) Sojak) stems
Juan Fernando Hidalgo-Cordero et al.
JOURNAL OF BUILDING ENGINEERING (2020)
Micro-tensile behavior of Scots pine sapwood after heat treatments in superheated steam or pressurized hot water
Michael Altgen et al.
JOURNAL OF MATERIALS SCIENCE (2020)
High-pressure densification and hydrophobic coating for enhancing the mechanical properties and dimensional stability of soft poplar wood boards
Yong Yu et al.
JOURNAL OF WOOD SCIENCE (2020)
Adhesive application on particleboard from natural fibers: A review
Amina Adedoja Owodunni et al.
POLYMER COMPOSITES (2020)
Thermal, morphological, and mechanical characteristics of sustainable tannin bio-based foams reinforced with wood cellulosic fibers
Xi Wu et al.
INDUSTRIAL CROPS AND PRODUCTS (2020)
Sugarcane (Saccharum officinarium L.) bagasse binderless particleboard: Effect of hot pressing time study
Wan Noor Aidawati Wan Nadhari et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Development and characterization novel bio-adhesive for wood using kenaf core (Hibiscus cannabinus) lignin and glyoxal
M. Hazwan Hussin et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
One-sided surface charring of beech wood
Petr Cermak et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Recent development in binderless fiber-board fabrication from agricultural residues: A review
M. Nasir et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Evaluating dimensional stability in solid wood: a review of current practice
R. Sargent
JOURNAL OF WOOD SCIENCE (2019)
Surface Chemical Changes of Sugar Maple Wood Induced by Thermo-Hygromechanical (THM) Treatment
Qilan Fu et al.
MATERIALS (2019)
Mechanical properties and dimensional stability of particleboard fabricated from steam pre-treated banana trunk waste particles
Wan Noor Aidawati Wan Nadhari et al.
JOURNAL OF BUILDING ENGINEERING (2019)
Lignin-based copolymer adhesives for composite wood panels - A review
Aik Fei Ang et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
Life cycle assessment of wood-based boards produced in Japan and impact of formaldehyde emissions during the use stage
Katsuyuki Nakano et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2018)
Chemical, water vapour sorption and ultrastructural analysis of Scots pine wood thermally modified in high-pressure reactor under saturated steam
Maija Kymalainen et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Binderless Fiberboards Made from Unripe Coconut Husks
Celso Pires Araujo Junior et al.
WASTE AND BIOMASS VALORIZATION (2018)
Thermal treatment of wood using vegetable oils: A review
Seng Hua Lee et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
The effects of chemical components and particle size on the mechanical properties of binderless boards made from oak (Quercus spp.) logs degraded by shiitake fungi (Lentinula edodes)
Florence Hiu Yan Lui et al.
JOURNAL OF WOOD SCIENCE (2018)
Green Modification of Corn Stalk Lignin and Preparation of Environmentally Friendly Lignin-Based Wood Adhesive
Sen Wang et al.
POLYMERS (2018)
Development and characterization of a new bio-adhesive for wood using cassava starch and bio-oil
Jingchen Xing et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)
Influence of temperature of thermal treatment on surface densification of spruce
Mirko Kariz et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2017)
Soy-based adhesives for wood-bonding - a review
Doroteja Vnucec et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2017)
Surface modification of solid wood by charring
M. Kymalainen et al.
JOURNAL OF MATERIALS SCIENCE (2017)
Improve Performance of Soy Flour-Based Adhesive with a Lignin-Based Resin
Xiaochun Zhang et al.
POLYMERS (2017)
Fire-resistance, Physical, and Mechanical Characterization of Binderless Rice Straw Particleboards
Cristina C. Ferrandez-Garcia et al.
BIORESOURCES (2017)
Effects of Heat and Steam on the Mechanical Properties and Dimensional Stability of Thermo-hygromechanically-densified Sugar Maple Wood
Qilan Fu et al.
BIORESOURCES (2017)
Effects of Heat Post-Treatment on Dimensional Stability and Water Absorption Behaviours of Mechanically Densified Uludağ Fir and Black Poplar Woods
Hüseyin Pelit et al.
BioResources (2016)
Investigation of the Structural Characteristics of Corn Stalk during Hot-Pressing
Xi Le et al.
BIORESOURCES (2016)
The Effects of Densification and Heat Post-Treatment on Hardness and Morphological Properties of Wood Materials
Mehmet Budakci et al.
BIORESOURCES (2016)
Optimization of the Thermo-Hygromechanical (THM) Process for Sugar Maple Wood Densification
Qilan Fu et al.
BIORESOURCES (2016)
Wood densification and thermal modification: hardness, set-recovery and micromorphology
Kristiina Laine et al.
WOOD SCIENCE AND TECHNOLOGY (2016)
Organosolv Lignin-Based Wood Adhesive. Influence of the Lignin Extraction Conditions on the Adhesive Performance
Issam Dababi et al.
POLYMERS (2016)
Effect of Lignin on Bamboo Biomass Self-Bonding During Hot-Pressing: Lignin Structure and Characterization
Dong-Li Li et al.
BioResources (2015)
Introduction to Special Issue Wood Adhesives: Past, Present, and Future
Charles R. Frihart
FOREST PRODUCTS JOURNAL (2015)
Properties of binderless board made from rice straw: The morphological effect of particles
Yoko Kurokochi et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
Effect of surface structure, wax and silica on the properties of binderless board made from rice straw
Yoko Kurokochi et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
A review of preparation of binderless fiberboards and its self-bonding mechanism
Daihui Zhang et al.
WOOD SCIENCE AND TECHNOLOGY (2015)
Thermo-mechanical Densification of Populus tomentosa var. tomentosa with Low Moisture Content
Dengyun Tu et al.
BioResources (2014)
Chemical Changes of Raw Materials and Manufactured Binderless Boards during Hot Pressing: Lignin Isolation and Characterization
Yong-Chang Sun et al.
BioResources (2014)
Properties of steam treated binderless particleboard made from oil palm trunks
Norhafizah Saari et al.
COMPOSITES PART B-ENGINEERING (2014)
Preparation and properties of binderless boards from Jatropha curcas L. seed cake
H. Hidayat et al.
INDUSTRIAL CROPS AND PRODUCTS (2014)
Micromorphological studies of surface densified wood
Kristiina Laine et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Measurement of some properties of binderless composites manufactured from oil palm trunks and Acacia mangium
Wan Noor Aidawati Wan Nadhari et al.
MEASUREMENT (2014)
Advanced binderless board-like green nanocomposites from undebarked cotton stalks and mechanism of self-bonding
Tamer Y. A. Fahmy et al.
CELLULOSE (2013)
Influence of processing parameters on some properties of oil palm trunk binderless particleboard
Jia Geng Boon et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2013)
Hardness and density profile of surface densified and thermally modified Scots pine in relation to degree of densification
Lauri Rautkari et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Measuring the thickness swelling and set-recovery of densified and thermally modified Scots pine solid wood
Kristiina Laine et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Anatomical properties and process parameters affecting blister/blow formation in densified European aspen and downy birch sapwood boards by thermo-hygro-mechanical compression
Sheikh Ali Ahmed et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Characterization of bagasse binderless particleboard manufactured in high-temperature range
Sho Nonaka et al.
JOURNAL OF WOOD SCIENCE (2013)
Characterization of date palm lignocellulosic by-products and self-bonded composite materials obtained thereof
Nabila Saadaoui et al.
MATERIALS & DESIGN (2013)
Characterization of heat treated wood species
Trisna Priadi et al.
MATERIALS & DESIGN (2013)
The suitable harvesting season and the part of moso bamboo (Phyllostachys pubescens) for producing binderless boards
Yukie Saito et al.
WOOD SCIENCE AND TECHNOLOGY (2013)
Influence of temperature and steam environment on set recovery of compressive deformation of wood
Andreja Kutnar et al.
WOOD SCIENCE AND TECHNOLOGY (2012)
Apparatus for viscoelastic thermal compression of wood
Frederick A. Kamke et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2011)
Surface modification of Scots pine: the effect of process parameters on the through thickness density profile
Lauri Rautkari et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Characterization of raw materials and manufactured binderless particleboard from oil palm biomass
Rokiah Hashim et al.
MATERIALS & DESIGN (2011)
Influence of press temperature on the properties of binderless particleboard made from oil palm trunk
Rokiah Hashim et al.
MATERIALS & DESIGN (2011)
Density profile relation to hardness of viscoelastic thermal compressed (VTC) wood composite
Lauri Rautkari et al.
WOOD SCIENCE AND TECHNOLOGY (2011)
Interactive effect of surface densification and post-heat-treatment on aspen wood
Meng Gong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Effect of particle geometry on the properties of binderless particleboard manufactured from oil palm trunk
Rokiah Hashim et al.
MATERIALS & DESIGN (2010)
Binderless fiberboard from steam exploded banana bunch
German Quintana et al.
INDUSTRIAL CROPS AND PRODUCTS (2009)
Thermo characteristics of steam-exploded bamboo (Phyllostachys pubescens) lignin
Shunliu Shao et al.
WOOD SCIENCE AND TECHNOLOGY (2009)
Chemical modification and wetting of medium density fibreboard produced from heat-treated fibres
Rosilei A. Garcia et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Cynara cardunculus as raw material for the production of binderless fiberboards: Optimization of pretreatment and pressing conditions
C. Mancera et al.
JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY (2008)
Bond durability of kenaf core binderless boards I: two-cycle accelerated aging boil test
Nobuhisa Okuda et al.
JOURNAL OF WOOD SCIENCE (2007)
Thermogravimetric study of high temperature treatment of aspen: effect of treatment parameters on weight loss and mechanical properties
D. Kocaefe et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Effects of steaming process on some properties of eucalyptus particleboard bonded with UF and MUF adhesives
Semra Colak et al.
BUILDING AND ENVIRONMENT (2007)
Mechanical and chemical behavior of spruce wood modified by heat
Sibel Yildiz et al.
BUILDING AND ENVIRONMENT (2006)
Water resistance properties of kenaf core binderless boards
Nobuhisa Okuda et al.
JOURNAL OF WOOD SCIENCE (2006)
XPS characterization of wood chemical composition after heat-treatment
G. Nguila Inari et al.
SURFACE AND INTERFACE ANALYSIS (2006)
Chemical changes of kenaf core binderless boards during hot pressing (I): influence of the pressing temperature condition
Nobuhisa Okuda et al.
JOURNAL OF WOOD SCIENCE (2006)
Development of binderless fiberboard from kenaf core
Jianying Xu et al.
JOURNAL OF WOOD SCIENCE (2006)
The effects of a two stage heat treatment process on the properties of particleboard
MJ Boonstra et al.
HOLZ ALS ROH-UND WERKSTOFF (2006)
Self-bonding characteristics of binderless kenaf core composites
R Widyorini et al.
WOOD SCIENCE AND TECHNOLOGY (2005)
Chemical changes in steam-pressed kenaf core binderless particleboard
R Widyorini et al.
JOURNAL OF WOOD SCIENCE (2005)
Manufacture and properties of binderless particleboard from bagasse I: effects of raw material type, storage methods, and manufacturing process
R Widyorini et al.
JOURNAL OF WOOD SCIENCE (2005)
Production process for high density high performance binderless boards from whole coconut husk
JEG van Dam et al.
INDUSTRIAL CROPS AND PRODUCTS (2004)
Manufacture and properties of low-density binderless particleboard from kenaf core
AY Xu et al.
JOURNAL OF WOOD SCIENCE (2004)
Manufacture and mechanical properties of binderless boards from kenaf core
N Okuda et al.
JOURNAL OF WOOD SCIENCE (2004)
Physical properties of medium-density wheat straw particleboard using different adhesives
XQ Mo et al.
INDUSTRIAL CROPS AND PRODUCTS (2003)
Binderless fiberboard from steam exploded Miscanthus sinensis
JA Velasquez et al.
WOOD SCIENCE AND TECHNOLOGY (2003)
Binderless fiberboard from steam exploded Miscanthus Sinensis: optimization of pressing and pretreatment conditions
J Salvado et al.
WOOD SCIENCE AND TECHNOLOGY (2003)
Development of binderless particleboard from kenaf core using steam-injection pressing
JY Xu et al.
JOURNAL OF WOOD SCIENCE (2003)
Durability of heat-treated wood
DP Kamden et al.
HOLZ ALS ROH-UND WERKSTOFF (2002)
Suitability of steam exploded residual softwood for the production of binderless panels. Effect of the pre-treatment severity and lignin addition
MN Angles et al.
BIOMASS & BIOENERGY (2001)
Development of boards made from oil palm frond II: properties of binderless boards from steam-exploded fibers of oil palm frond
N Laemsak et al.
JOURNAL OF WOOD SCIENCE (2000)
Compressive creep of wood under high temperature steam
W Dwianto et al.
HOLZFORSCHUNG (2000)