4.8 Article

Nitrogen-doped hollow carbon nanoparticles with optimized multiscale nanostructures via dolomite-assisted chemical vapor deposition for high-performance potassium-ion capacitor

Related references

Note: Only part of the references are listed.
Review Electrochemistry

Effects of Crystallinity and Defects of Layered Carbon Materials on Potassium Storage: A Review and Prediction

Xiaoxu Liu et al.

Summary: This review discusses the key structural factors affecting potassium storage in LCMs, establishes a structure-property database, and systematically analyzes the effects of structural parameters on potassium storage properties. It provides a foundation for future exploration and applications in the field.

ELECTROCHEMICAL ENERGY REVIEWS (2022)

Article Chemistry, Multidisciplinary

Tissue-derived carbon microbelt paper: a high-initial-coulombic-efficiency and low-discharge-platform K+-storage anode for 4.5 V hybrid capacitors

Taoqiu Zhang et al.

Summary: Hard carbon microbelt paper (HCMB) prepared from cheap and renewable sanitary tissue as a binder-free anode exhibits high initial coulombic efficiency, excellent rate capability, and superior cycling stability. HCMB-based anodes demonstrate low discharge platform similar to graphite, suitable for potassium ion capacitors. Additionally, the effect of carbonization temperature on the K+-storage behavior of HCMB is systematically investigated and compared with graphite and soft carbon counterparts.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Article Materials Science, Multidisciplinary

Phosphorus-doping and oxygen vacancy endowing anatase TiO2 with excellent sodium storage performance

Hong-Shun Zhao et al.

Summary: Phosphorus-doped anatase TiO2 nanoparticles with oxygen vacancies show improved performance as anodes for sodium-ion batteries, with enhanced electronic conductivity and ion diffusion kinetics. The dual strategy contributes to better rate performance and cycling stability, and has potential for enhancing oxide anodes in rechargeable batteries.

RARE METALS (2022)

Article Chemistry, Multidisciplinary

Nitrogen and Oxygen Co-Doped Porous Hard Carbon Nanospheres with Core-Shell Architecture as Anode Materials for Superior Potassium-Ion Storage

Shaokun Chong et al.

Summary: The use of nitrogen and oxygen co-doped yolk-shell carbon sphere as anode material for potassium-ion batteries shows improved electrochemical performance including high initial charge capacity and cycling stability. Experimental results demonstrate the potential for high-performance hard carbon anode for PIBs.

SMALL (2022)

Article Engineering, Environmental

Potassium storage in bismuth nanoparticles embedded in N-doped porous carbon facilitated by ether-based electrolyte

Xi Liu et al.

Summary: In this study, high-performance potassium ion batteries were achieved by immobilizing Bi nanoparticles on N-doped porous carbon and matching with DME-based electrolyte. The precise control of Bi content and the unique porous nanostructure, along with the formed uniform SEI film, contribute to the excellent cycling stability and swift kinetics of the material.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Correlation between Potassium-Ion Storage Mechanism and Local Structural Evolution in Hard Carbon Materials

Jia Xu et al.

Summary: Hard carbons are promising anode materials for potassium-ion batteries due to their low cost, diverse precursors, easy-to-design nature, and excellent electrochemical performance. However, the relationship between the structure and potassium storage mechanism of hard carbons has not been clearly understood. In this study, a series of hard carbon materials with adjustable structures were synthesized to investigate the structure-mechanism relationships. The results showed that the evolution of the structural domain unit of hard carbon changes from amorphous to pseudographite and then to graphitelike domain with increasing temperature. The amorphous domain contributes to surface-controlled absorption behavior, while the pseudographite and graphitelike domains show diffusion-controlled insertion behavior. The hybrid amorphous and pseudographite domain structure exhibits the best electrochemical performance.

CHEMISTRY OF MATERIALS (2022)

Article Chemistry, Physical

Microstructure regulation of pitch-based soft carbon anodes by iodine treatment towards high-performance potassium-ion batteries

Chang Liu et al.

Summary: In this study, crosslinked pitch-based soft carbon nanosheets were synthesized through the iodination/dehydroiodination process at low temperature and carbonization with NaCl template. The optimized sample showed higher reversible capacity and cycling stability.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Article Chemistry, Physical

Concunrent manipulation of anion and cation adsorption kinetics in pancake-like carbon achieves ultrastable potassium ion hybrid capacitors

Gongrui Wang et al.

Summary: The researchers prepared a bi-functional hierarchical porous carbon material with superior energy storage performance for potassium ion hybrid capacitors. The material exhibited high specific capacity, stable cycling capability, and high energy/power density. The enhanced potassium ion storage was attributed to the synergy of structure, electronic properties, and ion adsorption kinetics. This study is of great importance for large-scale energy storage.

ENERGY STORAGE MATERIALS (2022)

Article Chemistry, Multidisciplinary

An improved bioinspired strategy to construct nitrogen and phosphorus dual-doped network porous carbon with boosted kinetics potassium ion capacitors

Chenchen Zhang et al.

Summary: In this work, nitrogen and phosphorus-doped network porous carbon materials (NPMCs) were synthesized via a self-sacrifice template strategy for the application in potassium-ion capacitors (PICs). The obtained NPMCs exhibited a desired structure and excellent electrochemical properties, resulting in high reversible capacity and strong charge transfer kinetics. The assembled PIC device showed a high working voltage and remarkable energy density, which is of great significance for various applications.

NANOSCALE (2022)

Article Chemistry, Multidisciplinary

Sulfur-Rich Graphene Nanoboxes with Ultra-High Potassiation Capacity at Fast Charge: Storage Mechanisms and Device Performance

Yiwei Sun et al.

Summary: The utilization of sulfur-rich graphene nanoboxes in potassium ion battery and potassium ion capacitor anodes demonstrates exceptional rate capability, high reversible capacity, and outstanding cycling stability, along with revealing insights into the reversible energy storage mechanism and kinetic properties.

ACS NANO (2021)

Article Chemistry, Physical

Precise synthesis of N-doped graphitic carbon via chemical vapor deposition to unravel the dopant functions on potassium storage toward practical K-ion batteries

Yu Zhao et al.

Summary: This study investigates the effects of edge-N and graphitic-N doping on potassium-ion storage in carbon anodes, providing guidance for the design of low-cost and high-performance PIB systems.

NANO RESEARCH (2021)

Article Chemistry, Multidisciplinary

Ultrafine MoP Nanoparticle Splotched Nitrogen-Doped Carbon Nanosheets Enabling High-Performance 3D-Printed Potassium-Ion Hybrid Capacitors

Wei Zong et al.

Summary: In this study, a series of MoP nanoparticle splotched nitrogen-doped carbon nanosheets (MoP@NC) were successfully synthesized, where MoP was uniformly confined in a 3D porous NC to form ultrafine nanoparticles facilitating ionic binding and storage. MoP@NC-1 demonstrated excellent performance and cycling stability, and was used as a highly electroactive additive in 3D printing ink to fabricate high-performance 3D-printed potassium-ion hybrid capacitors.

ADVANCED SCIENCE (2021)

Article Chemistry, Physical

Recent advances in potassium-ion hybrid capacitors: Electrode materials, storage mechanisms and performance evaluation

Yuanji Wu et al.

Summary: The review discusses the design of materials, performance issues, and prospects for potassium-ion hybrid capacitors (PIHCs).

ENERGY STORAGE MATERIALS (2021)

Article Nanoscience & Nanotechnology

High-Performance Potassium-Ion Batteries with Robust Stability Based on N/S-Codoped Hollow Carbon Nanocubes

Xianlu Lu et al.

Summary: The N/S-codoped hollow carbon nanocubes (NSHCCs) show excellent stability and cycling performance in potassium-ion batteries, with high specific capacity retention and good rapid charge/discharge performance.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Nanoscience & Nanotechnology

Facile Synthesis of P-Doped Carbon Nanosheets as Janus Electrodes of Advanced Potassium-Ion Hybrid Capacitor

Guobao Zhong et al.

Summary: The study synthesized P-PCNs and applied them to potassium-ion hybrid capacitors, demonstrating excellent electrochemical performance, including high capacity, stability, and high capacitance.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

Phosphorus and Oxygen Dual-Doped Porous Carbon Spheres with Enhanced Reaction Kinetics as Anode Materials for High-Performance Potassium-Ion Hybrid Capacitors

Shuoqing Zhao et al.

Summary: By designing phosphorus/oxygen dual-doped porous carbon spheres, this study achieved expanded interlayer distances, abundant redox active sites, and oxygen-rich defects, leading to high discharge capacity, outstanding rate capability, and ultralong cycling stability. The formation of P-C and P-O/P-OH bonds improved structural stability and contributed to a rapid surface-controlled potassium adsorption process, showing superior electrochemical performance in a potassium-ion hybrid capacitor.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Radial Pores in Nitrogen/Oxygen Dual-Doped Carbon Nanospheres Anode Boost High-Power and Ultrastable Potassium-Ion Batteries

Hongli Deng et al.

Summary: Constructing electrode materials with radial pores and N/O dual-doping in carbon nanospheres allows for fast ions and electrons transport, achieving high-power density and long-term cycling life in potassium-ion batteries. The unique structural engineering enables highly reversible electrochemical reactions and fast de/intercalation kinetics during rapid charge-discharge processes.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Physical

Superior potassium storage behavior of hard carbon facilitated by ether-based electrolyte

Haodong Dai et al.

Summary: The study investigated the potassium storage behavior of hard carbon prepared with corn cob as precursor in both ester and ether electrolytes. It showed that the hard carbon exhibited superior potassium storage performance in ether electrolyte compared to ester electrolyte, attributed to larger capacitive storage contribution and favorable solid electrolyte interphase (SEI) film. This research contributes to a better understanding of alkaline metal storage mechanisms in carbon materials with different electrolytes.

CARBON (2021)

Article Chemistry, Physical

Microwave-assisted synthesis of carbon dots modified graphene for full carbon-based potassium ion capacitors

Shu Dong et al.

Summary: Carbon dots modified reduced graphene oxides (LAP-rGO-CDs) synthesized via a rapid microwave-assisted method show enlarged interlayer spacing and faster ion transfer rate, making them suitable for potassium ion battery electrodes. LAP-rGO-CDs demonstrate excellent cycling stability and are assembled into a full carbon-based potassium ion capacitor with high energy density and power density.

CARBON (2021)

Article Chemistry, Physical

Perspective on Carbon Anode Materials for K+ Storage: Balancing the Intercalation-Controlled and Surface-Driven Behavior

Jiaying Yang et al.

Summary: Potassium-ion batteries (PIBs) are seen as a promising alternative to lithium-ion batteries due to the availability of potassium resources and the properties of K+-based electrolytes. Current research focuses on addressing issues caused by large-size K+, but there is a need to consider holistic performance, especially for practical applications.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

Fast potassium migration in mesoporous carbon with ultrathin framework boosting superior rate performance for high-power potassium storage

Huan Liu et al.

Summary: Mesoporous carbon with ultrathin framework (MCUF) was designed as an anode material for stable and high-power potassium storage performance, showing excellent potassium storage characteristics. The novel non-flammable potassium-ion capacitors assembled with MCUF exhibited outstanding cyclability, rate performance, and energy/power densities.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

Natural template derived porous carbon nanoplate architectures with tunable pore configuration for a full-carbon sodium-ion capacitor

Kunfang Wang et al.

Summary: The study introduces a simple and cost-effective method for synthesizing three-dimensional carbon nanoplates as both anode and cathode materials for Sodium-ion capacitors (SICs). The resulting mesoporous carbon nanoplates exhibit superior sodium storage performance and excellent capacitive behavior for anions, leading to high energy and power densities along with long cycling lifespan for the full-carbon SIC.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Energy & Fuels

Current status and future directions of multivalent metal-ion batteries

Yanliang Liang et al.

NATURE ENERGY (2020)

Review Chemistry, Multidisciplinary

Solid electrolyte interphase (SEI) in potassium ion batteries

Huwei Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Article Chemistry, Physical

Coal-based carbon anodes for high-performance potassium-ion batteries

Nan Xiao et al.

CARBON (2019)

Article Chemistry, Multidisciplinary

Boosting the Electrical Double-Layer Capacitance of Graphene by Self-Doped Defects through Ball-Milling

Yue Dong et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Review Chemistry, Physical

Status and Prospects of Organic Redox Flow Batteries toward Sustainable Energy Storage

Jian Luo et al.

ACS ENERGY LETTERS (2019)

Review Chemistry, Physical

Sodium metal anodes for room-temperature sodium-ion batteries: Applications, challenges and solutions

Xueying Zheng et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Multidisciplinary

CaO-Templated Growth of Hierarchical Porous Graphene for High-Power Lithium-Sulfur Battery Applications

Cheng Tang et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

Review Multidisciplinary Sciences

Multidimensional materials and device architectures for future hybrid energy storage

Maria R. Lukatskaya et al.

NATURE COMMUNICATIONS (2016)

Article Chemistry, Multidisciplinary

Carbon Electrodes for K-Ion Batteries

Zelang Jian et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Review Thermodynamics

Commercial and research battery technologies for electrical energy storage applications

Jaephil Cho et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2015)

Article Multidisciplinary Sciences

Ultrahigh volumetric capacitance and cyclic stability of fluorine and nitrogen co-doped carbon microspheres

Junshuang Zhou et al.

NATURE COMMUNICATIONS (2015)

Review Chemistry, Multidisciplinary

Towards greener and more sustainable batteries for electrical energy storage

D. Larcher et al.

NATURE CHEMISTRY (2015)

Article Chemistry, Multidisciplinary

Wavefunction and reactivity study of benzo[a]pyrene diol epoxide and its enantiomeric forms

Tian Lu et al.

STRUCTURAL CHEMISTRY (2014)

Article Multidisciplinary Sciences

Unstacked double-layer templated graphene for high-rate lithium-sulphur batteries

Meng-Qiang Zhao et al.

NATURE COMMUNICATIONS (2014)

Article Multidisciplinary Sciences

Holey graphene frameworks for highly efficient capacitive energy storage

Yuxi Xu et al.

NATURE COMMUNICATIONS (2014)

Article Chemistry, Multidisciplinary

The Li-Ion Rechargeable Battery: A Perspective

John B. Goodenough et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)