4.8 Article

Correlation function of specific capacity and electrical conductivity on carbon materials by multivariate analysis

Related references

Note: Only part of the references are listed.
Review Materials Science, Multidisciplinary

Recent progress of transition metal-based biomass-derived carbon composites for supercapacitor

Ya-Nan Zhang et al.

Summary: This paper reviews the application of biomass-derived carbon/transition metal-based composites in supercapacitors. These composites exhibit excellent performance and environmental friendliness, and can overcome the limitations of single-component materials. The paper also discusses the development trends and challenges of biomass-derived electrode materials.

RARE METALS (2023)

Article Chemistry, Physical

Impact of Hard Carbon Properties on Their Performance in Potassium-Ion Batteries

Louiza Larbi et al.

Summary: This study focuses on the synthesis of hard carbon spheres (HCS) and the effects of pyrolysis temperature on their properties and electrochemical performance in potassium-ion batteries (KIBs). Compared to commercial graphite, HCSs exhibit a spherical morphology, disordered structure, and low surface area. Most properties decrease with increasing pyrolysis temperature, except for helium density and closed porosity. Electrochemical tests show that HCSs have higher initial Coulombic efficiency and better specific capacities compared to graphite. HCSs pyrolyzed at 1500 and 1700 degrees C have the best initial Coulombic efficiency and specific capacities.

ACS APPLIED ENERGY MATERIALS (2023)

Article Nanoscience & Nanotechnology

Ultrahigh Density of Atomic CoFe-Electron Synergy in Noncontinuous Carbon Matrix for Highly Efficient Magnetic Wave Adsorption

Wenhuan Huang et al.

Summary: In this study, a high-temperature explosion strategy was used to successfully assemble hierarchical porous carbon sponge with Co-Fe decoration. The as-constructed hybrid material exhibited superior electromagnetic wave absorption performance. Off-axis electron holography and X-ray absorption spectroscopy analysis revealed the presence of polarized nanodomain and the mutual interaction between metal clusters and carbon matrix responsible for the improved absorption.

NANO-MICRO LETTERS (2022)

Article Chemistry, Physical

Temperature induced transformation of Co@C nanoparticle in 3D hierarchical core-shell nanofiber network for enhanced electromagnetic wave adsorption

Wenhuan Huang et al.

Summary: This study successfully synthesized a three-dimensional hierarchical core-shell nanofiber network with N-doped carbon core fibers and Co@C nanoparticles for enhanced polarization and magnetic loss. The nanofiber network showed excellent electromagnetic wave attenuation and impedance matching performance.

CARBON (2022)

Article Chemistry, Physical

Enhanced ionic diffusion interface in hierarchical metal-organic framework@layered double hydroxide for high-performance hybrid supercapacitors

Yanan Zhang et al.

Summary: This study developed a diffusion-controlled interface in the hierarchical structure of MOF/LDH electrode materials, significantly improving the rate capability and durability of LDH. The resulting electrode material exhibited remarkable specific capacity and energy density, along with excellent capacitance retention.

NANO RESEARCH (2022)

Article Chemistry, Physical

?Host-Guest? crystalline Mo/Co-framework induced phase-conversion of MoCx in carbon hybrids for regulating absorption of electromagnetic wave

Wenhuan Huang et al.

Summary: Understanding the structure and synthesis of metallic crystalline precursors is crucial for designing electromagnetic wave absorbing materials with enhanced performance. In this study, two different crystalline Mo-species incorporated metal-organic framework precursors were designed and studied for their electromagnetic wave absorbing mechanism. The results showed that the designed materials exhibited excellent electromagnetic wave absorption properties.

CARBON (2022)

Article Engineering, Electrical & Electronic

Characteristics of an artificial graphite anode material for rapid charging: manufactured with different coke particle sizes

Jin Ung Hwang et al.

Summary: The electrochemical properties of artificial graphite anode materials prepared using coke at different particle sizes were compared. The results show that the anode prepared with coke particle size of 10-15μm exhibits good low-speed charge-discharge characteristics, while the anode prepared with coke particle size of 2-5μm forms voids capable of storing lithium ions. In addition, by controlling the lithium ion insertion-deintercalation path and diffusion distance, high-speed discharge performance at low temperatures was achieved.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Review Energy & Fuels

Overview of batteries and battery management for electric vehicles

Wei Liu et al.

Summary: The popularization of electric vehicles is an effective solution to combat the climate crisis. This article reviews the evolution and challenges of EV batteries and battery management technologies, and envisions the future development trends and opportunities.

ENERGY REPORTS (2022)

Article Chemistry, Multidisciplinary

Surface decorated Ni sites for superior photocatalytic hydrogen production

Wenhuan Huang et al.

Summary: Precisely constructing isolated reactive centers on semiconductors allows for the investigation of photocatalytic reaction mechanisms and targeted conversion of solar energy to produce hydrogen. In this research, isolated Ni atoms were decorated on the surface of CdS nanowires for efficient photocatalytic hydrogen production.

SUSMAT (2022)

Review Green & Sustainable Science & Technology

Lithium-Ion Batteries-The Crux of Electric Vehicles with Opportunities and Challenges

Shriram S. Rangarajan et al.

Summary: With the widespread use of lithium-ion batteries in consumer electronics and electric vehicles, there have been significant changes in the consumer electronics and automotive industries. The performance of liquid crystal displays and batteries in the automotive sector has become a key focus of research.

CLEAN TECHNOLOGIES (2022)

Article Materials Science, Multidisciplinary

Fullerene-Intercalated Graphitic Carbon Nitride as a High-Performance Anode Material for Sodium-Ion Batteries

Pengju Li et al.

Summary: This study presents a fullerene-modified graphitic carbon nitride material with outstanding performance as an anode for sodium-ion batteries, showing high-reversible capacity, excellent rate capability, and ultra-long cycle life. The presence of fullerene molecules enhances electronic conductivity, prevents sheet restacking, and exposes edge N defects, leading to improved sodium-ion storage performance. Furthermore, a sodium-ion full cell combining this anode material with a cathode provides high-coulombic efficiency, exceptionally high-energy density, and excellent cycling stability.

ENERGY & ENVIRONMENTAL MATERIALS (2022)

Review Energy & Fuels

Raman Spectroscopy as a Versatile Tool for Investigating Thermochemical Processing of Coal, Biomass, and Wastes: Recent Advances and Future Perspectives

Jun Xu et al.

Summary: Raman spectroscopy is a powerful tool for analyzing various samples, covering the entire thermochemical processing of coal, biomass, and wastes. It can be used for characterizing and diagnosing feedstock and products, providing important support for studying thermochemical processes.

ENERGY & FUELS (2021)

Article Materials Science, Multidisciplinary

Preparation of high-crystallinity synthetic graphite from hard carbon-based carbon black

Min Il Kim et al.

Summary: In this study, synthetic graphite was prepared from hard carbon-based carbon black (HCCB) through a three-step heat treatment process, which resulted in high crystallinity and few defects in the synthetic graphite. This new method is expected to diversify the raw materials for synthetic graphite preparation and solve the issues with traditional methods.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)

Article Crystallography

Analysis of Activation Process of Carbon Black Based on Structural Parameters Obtained by XRD Analysis

Sang-Min Lee et al.

Summary: In this study, carbon black activated by CO2 gas was analyzed through XRD analysis to observe changes in structural parameters. The activation process was controlled by isothermally activating the carbon black with CO2 gas flow, gradually activating the amorphous fraction on the surface and less-developed crystalline regions.

CRYSTALS (2021)

Article Green & Sustainable Science & Technology

Future Trends and Aging Analysis of Battery Energy Storage Systems for Electric Vehicles

Pedram Asef et al.

Summary: This study focuses on recent trends and developments in battery deployment for electric vehicles, providing systematic reviews on energy, state-of-charge, thermal efficiency, energy productivity, life cycle, size, market revenue, security, and commerciality aspects. It also offers guidelines for better battery selection for traction applications based on exceptional performance, considering the sustainability issues faced by electric vehicles.

SUSTAINABILITY (2021)

Article Nanoscience & Nanotechnology

Local Structures of Soft Carbon and Electrochemical Performance of Potassium-Ion Batteries

Mingyang Ou et al.

Summary: This study systematically characterized the structural features of soft carbon at different pyrolysis temperatures and found a close correlation between the non-uniformity and defect concentration within soft carbon and potassium storage behavior. By utilizing reverse Monte Carlo modeling and density functional theory calculations, optimization strategies for designing advanced soft carbon anodes for high-performance rechargeable PIBs were discussed.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Multidisciplinary

Carbon materials for ion-intercalation involved rechargeable battery technologies

Gang Wang et al.

Summary: The ever-increasing energy demand has driven the research on inexpensive, safe, scalable, and high-performance rechargeable batteries, with carbon materials being extensively studied as electrode materials. Carbon materials can serve as ideal anodes for 'Rocking-Chair' alkali metal-ion batteries and also show potential for dual-ion battery and Al-ion battery technologies. Significant advances have been made in understanding the porous structure, chemical composition, and interlayer spacing control of carbon materials as cation and anion hosts, with a focus on developing novel carbon nanostructures and carbon-derived energy storage devices.

CHEMICAL SOCIETY REVIEWS (2021)

Article Chemistry, Multidisciplinary

Effect of crystallinity and particle size on coke-based anode for lithium ion batteries

Seung Eun Lee et al.

Summary: This study found that the crystalline properties significantly affect the performance of graphite anode materials, with higher crystallinity resulting in higher initial efficiency and the presence of cavities between crystals impacting lithium ion capacity. Rate performance is more influenced by particle size, with 10-15 microns being the optimal range for performance.

CARBON LETTERS (2021)

Article Chemistry, Physical

Graphitized Carbon Xerogels for Lithium-Ion Batteries

Maria Canal-Rodriguez et al.

MATERIALS (2020)

Article Materials Science, Multidisciplinary

High-quality electrical transport using scalable CVD graphene

Sergio Pezzini et al.

2D MATERIALS (2020)

Article Chemistry, Multidisciplinary

Antioxidative Lithium Reservoir Based on Interstitial Channels of Carbon Nanotube Bundles

Seok-Kyu Cho et al.

NANO LETTERS (2019)

Article Chemistry, Multidisciplinary

High-Mobility, Wet-Transferred Graphene Grown by Chemical Vapor Deposition

Domenico De Fazio et al.

ACS NANO (2019)

Article Engineering, Electrical & Electronic

Radiation properties of graphene-based optically transparent dipole antenna

Shohei Kosuga et al.

MICROWAVE AND OPTICAL TECHNOLOGY LETTERS (2018)

Article Chemistry, Physical

Synthesis of Few-Layer Graphene by Peeling Graphite Flakes via Electron Exchange in Solution Plasma

Sangwoo Chae et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Article Chemistry, Multidisciplinary

Raman Spectroscopy of Lattice-Matched Graphene on Strongly Interacting Metal Surfaces

Dmitry Yu. Usachov et al.

ACS NANO (2017)

Article Multidisciplinary Sciences

Raman spectroscopy as probe of nanometre-scale strain variations in graphene

C. Neumann et al.

NATURE COMMUNICATIONS (2015)

Article Chemistry, Physical

In situ Raman study of lithium-ion intercalation into microcrystalline graphite

Christopher Sole et al.

FARADAY DISCUSSIONS (2014)

Review Chemistry, Physical

Lithium Ion Battery Anode Aging Mechanisms

Victor Agubra et al.

MATERIALS (2013)

Article History & Philosophy Of Science

The Hill equation and the origin of quantitative pharmacology

Rudolf Gesztelyi et al.

ARCHIVE FOR HISTORY OF EXACT SCIENCES (2012)

Article Chemistry, Multidisciplinary

High-Yield Production and Transfer of Graphene Flakes Obtained by Anodic Bonding

Thomas Moldt et al.

ACS NANO (2011)

Article Chemistry, Multidisciplinary

Facile Physical Route to Highly Crystalline Graphene

Meihua Jin et al.

ADVANCED FUNCTIONAL MATERIALS (2011)

Review Chemistry, Physical

A review of advanced and practical lithium battery materials

Rotem Marom et al.

JOURNAL OF MATERIALS CHEMISTRY (2011)

Article Chemistry, Multidisciplinary

Macroscopic Wall Number Analysis of Single-Walled, Double-Walled, and Few-Walled Carbon Nanotubes by X-ray Diffraction

Don N. Futaba et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Article Chemistry, Multidisciplinary

Nanoscale Mapping of Electrical Resistivity and Connectivity in Graphene Strips and Networks

Peter N. Nirmalraj et al.

NANO LETTERS (2011)

Article Chemistry, Physical

Preparation of graphene by exfoliation of graphite using wet ball milling

Weifeng Zhao et al.

JOURNAL OF MATERIALS CHEMISTRY (2010)

Article Physics, Condensed Matter

Substrate effect on thickness-dependent friction on graphene

Qunyang Li et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2010)

Article Chemistry, Physical

Carbon Nanotubes: Synthesis, Properties and Pharmaceutical Applications

Inderbir Singh et al.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2009)

Review Pharmacology & Pharmacy

The Hill equation: a review of its capabilities in pharmacological modelling

Sylvain Goutelle et al.

FUNDAMENTAL & CLINICAL PHARMACOLOGY (2008)

Review Materials Science, Multidisciplinary

Diamond-like amorphous carbon

J Robertson

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2002)