Off-site construction with 3D concrete printing

Article Construction & Building Technology

Blockchain-Enabled IoT-BIM Platform for Supply Chain Management in Modular Construction

Xiao Li et al.

Summary: This study proposes a novel system architecture for a blockchain-enabled IoT-BIM platform and confirms its effectiveness in supply chain management through a case study.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Manufacturing

3D Printed Formwork for Concrete: State-of-the-Art, Opportunities, Challenges, and Applications

Andrei Jipa et al.

Summary: This article reviews the current state-of-the-art in digital fabrication of concrete components using 3D printing technologies for formwork fabrication. It provides a comprehensive map of five different 3D printing technologies used for formwork production. The discussion includes new geometric possibilities, sustainability potential, and comparison with traditional and digital fabrication tools, serving as a fundamental reference for future research and development of construction standards.

3D PRINTING AND ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Construction & Building Technology

On sustainability and digital fabrication with concrete

Robert J. Flatt et al.

Summary: Digital concrete is seen as a more sustainable construction option, but often has higher carbon footprints and reduced durability compared to standard concrete. Shape efficiency is the unique environmental benefit it brings, with efforts needed to align it more closely with standard concrete by incorporating large aggregates and improving durability characterization. Overdesigned 3D printed concretes can benefit from aluminum accelerators in a 2K system to separate buildability from structural strength and lower carbon footprints in mix design.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Construction & Building Technology

The realities of additively manufactured concrete structures in practice

F. P. Bos et al.

Summary: Extrusion-based 3D Concrete Printing is gaining popularity in construction industry, but facing challenges such as design matching, quality consistency, limited reinforcement options, and lack of regulatory framework; crucial expertise areas in practical production include digital, machine, and material knowledge.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Review Engineering, Mechanical

A critical review of 3D printing and digital manufacturing in construction engineering

Md. Hazrat Ali et al.

Summary: 3D printing technologies have brought great potentials and benefits to the construction industry, including process automation, resource saving, and improved efficiency. Current research focuses on material performance and the development of new techniques, with the need for further exploration on the applications of 3D printing in different sectors of construction.

RAPID PROTOTYPING JOURNAL (2022)

Add to Collection

Article Construction & Building Technology

A plastic shrinkage cracking risk model for 3D printed concrete exposed to different environments

G. M. Moelich et al.

Summary: This study investigates the behavior of plastic shrinkage cracking in 3D printed concrete by exposing printed specimens to different drying conditions. The results show that the evaporation rate is closely related to the rate of concrete mass loss, and increasing the evaporation rate leads to direct shrinkage in the concrete.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Review Chemistry, Physical

A Scientometric Review on Mapping Research Knowledge for 3D Printing Concrete

Chuan He et al.

Summary: This study conducts a scientometric review of 3D printing concrete to explore different aspects of the literature. The findings suggest limitations in conventional review studies and the need to address issues like co-occurrence, science mapping, and co-citation. The analysis of sources, researchers, keyword co-occurrences, and involved domains provides insights for joint venture development and sharing of strategies and ideas in academia.

MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

BIM-enabled computerized design and digital fabrication of industrialized buildings: A case study

Rui He et al.

Summary: Industrialized construction utilizes BIM technology to achieve more efficient building design and manufacturing, especially in the recent advancements in concrete 3D printing. The study highlights the need for more attention to BIM open standards, interdependent building systems, and data-driven decision making in the future.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Construction & Building Technology

Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review

Manu K. Mohan et al.

Summary: This paper provides a comprehensive review of the material behaviour for extrusion-based concrete 3D printing, covering aspects from early-age behaviour to long-term performance, including recent progress in understanding early-age behaviour, mechanical response in the hardened state, strategies for introducing reinforcement, insights on transport mechanisms in printed concrete for long-term performance assessment, and the overall impact of concrete 3D printing construction on sustainability.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

A systematic overview of prefabricated construction policies in China

Ting Luo et al.

Summary: The study reviewed prefabricated construction policies in China, finding that the government focuses less on practical schemes, with standards being the most commonly used policy instrument, regulations being largely ignored, and incentives being used the least frequently due to fiscal burdens. A roadmap for optimizing existing policies was proposed, providing a valuable reference for the large-scale promotion of prefabricated construction in other countries and regions.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Environmental and economic assessment on 3D printed buildings with recycled concrete

Yilong Han et al.

Summary: This study evaluated the environmental impact and economic benefit of 3D printed buildings made of recycled concrete. It found that while 3D printing concrete construction has a larger environmental impact compared to traditional methods, it offers significant advantages in terms of cost efficiency, particularly for geometrically irregular buildings. Additionally, the cost of buildings made of recycled concrete decreases as the proportion of recycled aggregate increases.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Construction & Building Technology

A 3D concrete printing prefabrication platform for bespoke columns

Ana Anton et al.

Summary: This paper discusses the latest developments in digital concrete fabrication, specifically 3DCP, and its application in customized column production. The technology allows shaping concrete without formwork and placing material only where functionally required, thus optimizing material use. Additionally, the paper proposes a method for evaluating the geometric complexity of columns.

AUTOMATION IN CONSTRUCTION (2021)

Add to Collection

Article Construction & Building Technology

Effect of alkali reactions on the rheology of one-part 3D printable geopolymer concrete

Shravan Muthukrishnan et al.

Summary: This study investigates the influence of early age activation reactions on the yield strength development of 3D printable geopolymer concrete, using a rheo-chemical approach. The results show that by selecting appropriate activator, thixotropic additive, and retarder content, the printability of concrete can be enhanced.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Review Construction & Building Technology

Integrating reinforcement in digital fabrication with concrete: A review and classification framework

Viktor Mechtcherine et al.

Summary: This article provides a comprehensive overview of existing solutions for integrating reinforcement in digital concrete technologies, particularly focusing on 3D concrete printing. The research emphasizes on the technological aspects of the integration process, introducing a generic classification and process description framework, highlighting that reinforcement integration typically occurs separately from concrete shaping. In 3DCP approaches, however, reinforcement can be integrated as part of a single-step AM process during concrete shaping.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

Investigation of interlayer adhesion of 3D printable cementitious material from the aspect of printing process

Yiwei Weng et al.

Summary: This study investigated the effects of parameters on interlayer bond strength in 3DCP from different phases, including mixing, printing, and post-processing phases. The results showed that increasing superplasticizer dosage in the mixing phase, increasing pumping speed in the printing phase, and proper curing in the post-processing phase can improve interlayer bond strength. While surface moisture content (SMC) has a critical impact, material thixotropic index (Ithix) probably has a stronger influence on interlayer bond strength.

CEMENT AND CONCRETE RESEARCH (2021)

Add to Collection

Article Construction & Building Technology

Effect of polyethylene fiber content on workability and mechanical-anisotropic properties of 3D printed ultra-high ductile concrete

Junhong Ye et al.

Summary: The study found that the printed UHDC with a fiber content of 1.5% exhibited better workability and mechanical properties, as well as reduced material cost.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

State of practice of automation in precast concrete production

Sara Reichenbach et al.

Summary: The current evaluation of the building industry reveals low efficiency in material use and automation level, as well as a scarcity of skilled workers in mechanical engineering and construction. Therefore, there is a noticeable shift towards automated production processes, particularly in the field of precast concrete construction. The high innovation spirit in individual research facilities and companies has led to various new applications of robotics and automated systems in the precast industry.

JOURNAL OF BUILDING ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Sustainable materials for 3D concrete printing

Shantanu Bhattacherjee et al.

Summary: This paper examines the sustainability aspects of binders used in concrete 3D concrete printing, emphasizing the importance of reducing embodied impacts to enhance sustainability potential. It reviews literature on different binder systems and explores alternative binders, highlighting the effect of using supplementary cementing materials and alternative binder systems for improving the sustainability of 3D printed structures. By quantifying environmental impacts, the paper illustrates the potential of sustainability assessment in terms of energy consumption and CO2 emissions with different binder systems.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

3D printing eco-friendly concrete containing under-utilised and waste solids as aggregates

Gang Bai et al.

Summary: 3D concrete printing technology provides an opportunity for utilising underutilised and waste solids as aggregates. The experimental study in this article shows that the self-supporting skeletal effect formed by gradated particles can improve the construction performance of mixtures and reduce the shrinkage of the cement matrix. These findings provide feasible solutions for promoting the eco-utilisation of underutilised and waste solids in 3D printing while meeting strength and durability requirements.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

Large-scale 3D printing concrete technology: Current status and future opportunities

Jianzhuang Xiao et al.

Summary: This review focuses on large-scale extrusion-based 3D printing concrete (3DPC) technologies, which are subdivided into three categories according to different printed objects and construction processes, and compares the different printability requirements of large-scale and lab-scale 3DPC. Practical problems of large-scale 3DPC are discussed, including reinforcement constructions, preparation and remix of concrete, and different large-scale 3D printing systems.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

Ambient temperature cured 'just-add-water' geopolymer for 3D concrete printing applications

Shin Hau Bong et al.

Summary: The research aims to improve the printability performance and mechanical properties of a geopolymer for 3D concrete printing by adjusting the type and dosage of activators and retarders to identify an optimum mixture. The results show that the optimum mixture exhibits excellent performance and energy-saving indicators, contributing to the large-scale applications and commercial viability of geopolymers in 3D concrete printing.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Engineering, Civil

Development of affordable steel-framed modular buildings for emergency situations (Covid-19)

Perampalam Gatheeshgar et al.

Summary: This paper presents the development of novel affordable steel-framed modular units for quick response in emergency situations, such as the current covid-19 pandemic. The units are made of steel components for enhanced overall performance and lightweight construction, with weight optimization and innovative connection methods. The design also includes features like modular breathing panels and strap bracing for improved indoor air quality and lateral stability.

STRUCTURES (2021)

Add to Collection

Article Materials Science, Ceramics

Fibre-reinforced lightweight engineered cementitious composites for 3D concrete printing

Junbo Sun et al.

Summary: A new fiber-reinforced high-performance lightweight engineered cementitious composite (LWECC) was proposed and thoroughly investigated for its fresh properties, compressive strength, and flexural strength, then calibrated through a printability assessment. The addition of hollow glass microspheres (HGMs) significantly improved the lightweight property of the material but inevitably negated mechanical properties. Superior toughness was observed when the printed filament was perpendicular to the loading direction, resulting in a 63% increase in compressive strength and a 40% increase in flexural strength.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Mathematical & Computational Biology

Which academic search systems are suitable for systematic reviews or meta-analyses? Evaluating retrieval qualities of Google Scholar, PubMed, and 26 other resources

Michael Gusenbauer et al.

RESEARCH SYNTHESIS METHODS (2020)

Add to Collection

Article Construction & Building Technology

Blockchain-based framework for improving supply chain traceability and information sharing in precast construction

Zhaojing Wang et al.

AUTOMATION IN CONSTRUCTION (2020)

Add to Collection

Article Construction & Building Technology

Evaluating the printability of concretes containing lightweight coarse aggregates

A. Rahul et al.

CEMENT & CONCRETE COMPOSITES (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Comparative analysis of modular construction practices in mainland China, Hong Kong and Singapore

Zhao Xu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Industrial

Supply Chain Management for Prefabricated Building Projects in Hong Kong

Lizi Luo et al.

JOURNAL OF MANAGEMENT IN ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

3D printing of a post-tensioned concrete girder designed by topology optimization

Gieljan Vantyghem et al.

AUTOMATION IN CONSTRUCTION (2020)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions

Zhijian Li et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

A novel additive mortar leveraging internal curing for enhancing interlayer bonding of cementitious composite for 3D printing

Guowei Ma et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Yield stress criteria to assess the buildability of 3D concrete printing

R. Jayathilakage et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Mechanics

Anisotropic behavior in bending of 3D printed concrete reinforced with fibers

Tao Ding et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Mechanical behavior of 3D printed mortar with recycled sand at early ages

Tao Ding et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

The influence of nano-additives in strengthening mechanical performance of 3D printed multi-binder geopolymer composites

Mehdi Chougan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance

Luong Pham et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Effect of different grade levels of calcined clays on fresh and hardened properties of ternary-blended cementitious materials for 3D printing

Yu Chen et al.

CEMENT & CONCRETE COMPOSITES (2020)

Add to Collection

Article Construction & Building Technology

A process classification framework for defining and describing Digital Fabrication with Concrete

R. A. Buswell et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Review Construction & Building Technology

Opportunities and challenges for structural engineering of digitally fabricated concrete

Costantino Menna et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Article Construction & Building Technology

On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)

Victor C. Li et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Review Construction & Building Technology

Extrusion-based additive manufacturing with cement-based materials - Production steps, processes, and their underlying physics: A review

V Mechtcherine et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Article Construction & Building Technology

Hardened properties of layered 3D printed concrete with recycled sand

Tao Ding et al.

CEMENT & CONCRETE COMPOSITES (2020)

Add to Collection

Article Construction & Building Technology

Development of 3D-printable ultra-high performance fiber-reinforced concrete for digital construction

Arun R. Arunothayan et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Engineering, Civil

A review on modular construction for high-rise buildings

Huu-Tai Thai et al.

STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

3D printable concrete: Mixture design and test methods

A. V. Rahul et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Construction & Building Technology

Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing

Guowei Ma et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Review Engineering, Civil

New advancements, challenges and opportunities of multi-storey modular buildings - A state-of-the-art review

Wahid Ferdous et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Embodied energy and greenhouse gas emissions analysis of a prefabricated modular house: The Moby case study

Vanessa Tavares et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Engineering, Industrial

Stakeholder-Associated Supply Chain Risks and Their Interactions in a Prefabricated Building Project in Hong Kong

Lizi Luo et al.

JOURNAL OF MANAGEMENT IN ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Method of Optimisation for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications

Shin Hau Bong et al.

MATERIALS (2019)

Add to Collection

Review Construction & Building Technology

Building information modelling for off-site construction: Review and future directions

Xianfei Yin et al.

AUTOMATION IN CONSTRUCTION (2019)

Add to Collection

Article Construction & Building Technology

A novel method to enhance the interlayer bonding of 3D printing concrete: An experimental and computational investigation

Ehsan Hosseini et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Construction & Building Technology

Hardened properties of 3D printed concrete: The influence of process parameters on interlayer adhesion

R. J. M. Wolfs et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical properties and deformation behaviour of early age concrete in the context of digital construction

Biranchi Panda et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing

Venkatesh Naidu Nerella et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Factors influencing the application of prefabricated construction in China: From perspectives of technology promotion and cleaner production

Guobin Wu et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Barriers to Building Information Modeling (BIM) implementation in China's prefabricated construction: An interpretive structural modeling (ISM) approach

Tan Tan et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Precast supply chain management in off-site construction: A critical literature review

Zhaojing Wang et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing

Biranchi Panda et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification

Taylor Marchment et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Engineering, Industrial

Integrated Risk Management Framework for Tolerance-Based Mitigation Strategy Decision Support in Modular Construction Projects

Mohammed S. A. Enshassi et al.

JOURNAL OF MANAGEMENT IN ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Weak bond strength between successive layers in extrusion-based additive manufacturing: measurement and physical origin

Emmanuel Keita et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Review Construction & Building Technology

Digital Concrete: A Review

Timothy Wangler et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Review Construction & Building Technology

Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges

Fatemeh Hamidi et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Conventional versus modular construction methods: A comparative cradle-to-gate LCA for residential buildings

Mohammad Kamali et al.

ENERGY AND BUILDINGS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Printability region for 3D concrete printing using slump and slump flow test

Yi Wei Daniel Tay et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Construction & Building Technology

Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing

Yiwei Weng et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

An ab initio approach for thixotropy characterisation of (nanoparticle-infused) 3D printable concrete

Jacques Kruger et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Development of 3D printable engineered cementitious composites with ultra-high tensile ductility for digital construction

Binrong Zhu et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Construction & Building Technology

A vision-based system for pre-inspection of steel frame manufacturing

Pablo Martinez et al.

AUTOMATION IN CONSTRUCTION (2019)

Add to Collection

Article Engineering, Civil

Steel concrete composite systems for modular construction of high-rise buildings

J. Y. R. Liew et al.

STRUCTURES (2019)

Add to Collection

Article Construction & Building Technology

Strain-based approach for measuring structural build-up of cement pastes in the context of digital construction

V. N. Nerella et al.

CEMENT AND CONCRETE RESEARCH (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Micro-cable reinforced geopolymer composite for extrusion-based 3D printing

Guowei Ma et al.

MATERIALS LETTERS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing

Wu-Jian Long et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Review Construction & Building Technology

Lean Methodologies and Techniques for Modular Construction: Chronological and Critical Review

Filomena Innella et al.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2019)

Add to Collection

Article Construction & Building Technology

Review of performance requirements for inter-module connections in multi-story modular buildings

Sriskanthan Srisangeerthanan et al.

Journal of Building Engineering (2019)

Add to Collection

Review Construction & Building Technology

Performance Review of Prefabricated Building Systems and Future Research in Australia

Satheeskumar Navaratnam et al.

BUILDINGS (2019)

Add to Collection

Review Construction & Building Technology

Critical evaluation of off-site construction research: A Scientometric analysis

M. Reza Hosseini et al.

AUTOMATION IN CONSTRUCTION (2018)

Add to Collection

Article Construction & Building Technology

An Internet of Things-enabled BIM platform for on-site assembly services in prefabricated construction

Clyde Zhengdao Li et al.

AUTOMATION IN CONSTRUCTION (2018)

Add to Collection

Article Construction & Building Technology

Optimal logistics planning for modular construction using two-stage stochastic programming

Pei-Yuan Hsu et al.

AUTOMATION IN CONSTRUCTION (2018)

Add to Collection

Article Construction & Building Technology

Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing

R. J. M. Wolfs et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

3D printing using concrete extrusion: A roadmap for research

R. A. Buswell et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Hydration and rheology control of concrete for digital fabrication: Potential admixtures and cement chemistry

Delphine Marchon et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Rheological requirements for printable concretes

Nicolas Roussel

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

The role of early age structural build-up in digital fabrication with concrete

Lex Reiter et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Fresh properties of a novel 3D printing concrete ink

Yu Zhang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Correlation between destructive compression tests and non-destructive ultrasonic measurements on early age 3D printed concrete

R. J. M. Wolfs et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Printable properties of cementitious material containing copper tailings for extrusion based 3D printing

Guowei Ma et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing

Sarah Al-Qutaifi et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

3D-printed steel reinforcement for digital concrete construction - Manufacture, mechanical properties and bond behaviour

Viktor Mechtcherine et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Effect of surface moisture on inter-layer strength of 3D printed concrete

Jay G. Sanjayan et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Effect of stakeholder collaborative management on off-site construction cost performance

Hong Xue et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

A SWOT analysis for promoting off-site construction under the backdrop of China's new urbanisation

Rui Jiang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Review Green & Sustainable Science & Technology

The role of modularity in sustainable design: A systematic review

Monique Sonego et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Barriers to promoting prefabricated construction in China: A cost-benefit analysis

Jingke Hong et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Barriers to the transition towards off-site construction in China: An Interpretive structural modeling approach

Xiaolong Gan et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Construction & Building Technology

Optimization modeling modeling of multi-skilled resources in prefabrication: Theorizing cost analysis of process integration in off-site construction

Mehrdad Arashpour et al.

AUTOMATION IN CONSTRUCTION (2018)

Add to Collection

Article Construction & Building Technology

Large-scale 3D printing by a team of mobile robots

Xu Zhang et al.

AUTOMATION IN CONSTRUCTION (2018)

Add to Collection

Article Construction & Building Technology

Particle-bed 3D printing in concrete construction - Possibilities and challenges

Dirk Lowke et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Vision of 3D printing with concrete - Technical, economic and environmental potentials

Geert De Schutter et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Rheological and mechanical properties of admixtures modified 3D printing sulphoaluminate cementitious materials

Mingxu Chen et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Overcoming barriers to off-site construction through engaging stakeholders: A two-mode social network analysis

Xiaolong Gan et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Review Green & Sustainable Science & Technology

A holistic review of off-site construction literature published between 2008 and 2018

Ruoyu Jin et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Construction & Building Technology

Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing

Biranchi Panda et al.

CEMENT & CONCRETE COMPOSITES (2018)

Add to Collection

Review Construction & Building Technology

Structural response of modular buildings - An overview

Andrew William Lacey et al.

JOURNAL OF BUILDING ENGINEERING (2018)

Add to Collection

Article Construction & Building Technology

Identification of Factors and Decision Analysis of the Level of Modularization in Building Construction

Pezhman Sharafi et al.

JOURNAL OF ARCHITECTURAL ENGINEERING (2018)

Add to Collection

Article Engineering, Civil

Numerical study of precast segmental column under blast loads

Jun Li et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Potential benefits of digital fabrication for complex structures: Envitonmental assessment of a robotically fabricated concrete-wall

Isolda Agusti-Juan et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Additive manufacturing of geopolymer for sustainable built environment

Biranchi Panda et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Development of performance criteria for sustainability evaluation of modular versus conventional construction methods

Mohammad Kamali et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Green & Sustainable Science & Technology

Analysis of stakeholder relationships in the industry chain of industrialized building in China

Yue Teng et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material

Biranchi Panda et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Construction & Building Technology

Managing risk in modular construction using dimensional and geometric tolerance strategies

Yasaman Shahtaheri et al.

AUTOMATION IN CONSTRUCTION (2017)

Add to Collection

Article Construction & Building Technology

BIM in off-site manufacturing for buildings

F. H. Abanda et al.

JOURNAL OF BUILDING ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Properties of 3D-printed fiber-reinforced Portland cement paste

Manuel Hambach et al.

CEMENT & CONCRETE COMPOSITES (2017)

Add to Collection

Article Construction & Building Technology

Digital reproduction of historical building ornamental components: From 3D scanning to 3D printing

Jie Xu et al.

AUTOMATION IN CONSTRUCTION (2017)

Add to Collection

Article Construction & Building Technology

Structural built-up of cement-based materials used for 3D-printing extrusion techniques

A. Perrot et al.

MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Construction & Building Technology

Off-site construction optimization: Sequencing multiple job classes with time constraints

Mehrdad Arashpour et al.

AUTOMATION IN CONSTRUCTION (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Life-cycle energy analysis of prefabricated building components: an input-output-based hybrid model

Jingke Hong et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Article Construction & Building Technology

Recipes for Cost and Schedule Successes in Industrial Modular Projects: Qualitative Comparative Analysis

Jin Ouk Choi et al.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2016)

Add to Collection

Article Construction & Building Technology

Recipes for Cost and Schedule Successes in Industrial Modular Projects: Qualitative Comparative Analysis

Jin Ouk Choi et al.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Large-scale 3D printing of ultra-high performance concrete - a new processing route for architects and builders

C. Gosselin et al.

MATERIALS & DESIGN (2016)

Add to Collection

Article Engineering, Manufacturing

Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing

Freek Bos et al.

VIRTUAL AND PHYSICAL PROTOTYPING (2016)

Add to Collection

Review Construction & Building Technology

Lean and agile integration within offsite construction using discrete event simulation A systematic literature review

Sherif Mostafa et al.

CONSTRUCTION INNOVATION-ENGLAND (2016)

Add to Collection

Article Green & Sustainable Science & Technology

A comparative study of environmental performance between prefabricated and traditional residential buildings in China

Xinying Cao et al.

JOURNAL OF CLEANER PRODUCTION (2015)

Add to Collection

Article Construction & Building Technology

Standardization Strategy for Modular Industrial Plants

James T. O'Connor et al.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2015)

Add to Collection

Article Engineering, Industrial

Utilization of 3D Visualization of Mobile Crane Operations for Modular Construction On-Site Assembly

Sang Hyeok Han et al.

JOURNAL OF MANAGEMENT IN ENGINEERING (2015)

Add to Collection

Article Engineering, Industrial

Major Barriers to Off-Site Construction: The Developer's Perspective in China

Chao Mao et al.

JOURNAL OF MANAGEMENT IN ENGINEERING (2015)

Add to Collection

Article Construction & Building Technology

Standardization Strategy for Modular Industrial Plants

James T. O'Connor et al.

JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT (2015)

Add to Collection

Article Engineering, Industrial

Risk factors affecting practitioners' attitudes toward the implementation of an industrialized building system A case study from China

Li-zi Luo et al.

ENGINEERING CONSTRUCTION AND ARCHITECTURAL MANAGEMENT (2015)

Add to Collection

Article Construction & Building Technology

Evolution of the crane selection and on-site utilization process for modular construction multilifts

Jacek Olearczyk et al.

AUTOMATION IN CONSTRUCTION (2014)

Add to Collection

Article Engineering, Industrial

Barriers of Implementing Modern Methods of Construction

M. Motiar Rahman

JOURNAL OF MANAGEMENT IN ENGINEERING (2014)

Add to Collection

Article Business

Classification of production systems for industrialized building: a production strategy perspective

Henric Jonsson et al.

CONSTRUCTION MANAGEMENT AND ECONOMICS (2014)

Add to Collection

Article Construction & Building Technology

Comparative study of greenhouse gas emissions between off-site prefabrication and conventional construction methods: Two case studies of residential projects

Chao Mao et al.

ENERGY AND BUILDINGS (2013)

Add to Collection

Article Engineering, Industrial

Lean Transformation in a Modular Building Company: A Case for Implementation

Haitao Yu et al.

JOURNAL OF MANAGEMENT IN ENGINEERING (2013)

Add to Collection

Article Construction & Building Technology

Off-Site Construction of Apartment Buildings

Neville Boyd et al.

JOURNAL OF ARCHITECTURAL ENGINEERING (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Software survey: VOSviewer, a computer program for bibliometric mapping

Nees Jan van Eck et al.

SCIENTOMETRICS (2010)

Add to Collection

Article Psychology, Multidisciplinary

Renovating the Pyramid of Needs: Contemporary Extensions Built Upon Ancient Foundations

Douglas T. Kenrick et al.

PERSPECTIVES ON PSYCHOLOGICAL SCIENCE (2010)

Add to Collection

Article Business

Future opportunities for offsite in the UK

Chris Goodier et al.

CONSTRUCTION MANAGEMENT AND ECONOMICS (2007)

Add to Collection

Off-site construction with 3D concrete printing

Related references

Export Citation

Share Paper