☆ 4.7 Review

Recent Development in Advance Ceramic Materials and Understanding the Mechanisms of Thermal Barrier Coatings Degradation

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Coatings & Films

Microstructure and Thermal Cycling Behavior of Ta2O5 and Y2O3 Co-doped ZrO2 Coatings

Dong Chen et al.

Summary: Ta2O5-Y2O3 co-doped ZrO2 (TYSZ) powders were synthesized and a TYSZ coating was prepared by atmospheric plasma spraying (APS). The properties of TYSZ and YSZ coating were studied. The results showed that the TYSZ coating had a layered structure and the coating bond strength was 27.5 MPa. After high-temperature heat treatment, the TYSZ coating reverted to the t phase. The thermal cycling test revealed that spalling and cracking occurred in the TYSZ coating due to the mismatch in the coefficient of thermal expansion between the coating and the substrate.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2023)

Add to Collection

Review Materials Science, Multidisciplinary

Multi-Scale Structural Design and Advanced Materials for Thermal Barrier Coatings with High Thermal Insulation: A Review

Jinbao Song et al.

Summary: Thermal barrier coatings (TBCs) are essential for protecting superalloy substrate components in high-temperature applications. However, they face challenges in extreme high-temperature environments, which can degrade their thermal and mechanical properties. This paper reviews the factors influencing TBCs' thermal insulation performance, including material, coating thickness, and structure. It also summarizes the heat transfer and degradation mechanisms and reviews recent advances in improving insulation and lifetime through advanced materials and structural design. This research will benefit future engineering applications and guide the development of high thermal insulating TBCs.

COATINGS (2023)

Add to Collection

Review Materials Science, Coatings & Films

Thermally Sprayed Functional Coatings and Multilayers: A Selection of Historical Applications and Potential Pathways for Future Innovation

V. Edward J. J. Gildersleeve et al.

Summary: Thermal spray coatings are unique material systems that have driven the development of modern technologies. Their distinctive thermal and mechanical properties have maintained industrial interest. However, the adoption of thermal spray technology in new applications can be challenging, potentially increasing risk. Nevertheless, industries have benefited from implementing thermal spray coatings to improve manufacturing cost and component performance.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Coatings & Films

Phase decompositions of Gd2Zr2O7+8YSZ TBC systems under the condition of long-term high-temperature oxidation

Amjad Iqbal et al.

Summary: The article presents the results of research on the phase composition of two-phase TBC systems using GZO and modified 8YSZ. Composite coatings with different powder proportions were evaluated, and high temperature oxidation was performed to assess changes in phase composition. It was found that GZO + 8YSZ coatings were highly susceptible to phase composition changes, resulting in the formation of new zirconate and zirconium oxide phases. The ceramic layer also exhibited a high concentration of nickel oxide and a slightly lower concentration of chromium oxide.

SURFACE & COATINGS TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Coatings & Films

High temperature stability and sintering resistance of Gd2O3-Yb2O3-Y2O3-ZrO2 (GYYZO) coating

Yuhang Zhang et al.

Summary: Solid-solution agglomerated ZrO2-based powders co-doped with Gd2O3, Yb2O3 and Y2O3 rare earth oxides were synthesized via solid-phase sintering and spray drying. The resulting GYYZO coating exhibited better phase stability and sintering resistance compared to the 8YSZ coating, as demonstrated by SEM, XRD, DSC, EPMA, and TEM analyses. The superior high temperature performance of the GYYZO coating can be attributed to the pinning effect of nano-pores on grain boundaries, which were formed due to the evolution of defect clusters facilitated by Gd-Yb co-doping.

SURFACE & COATINGS TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

CMAS Corrosion Resistance Behavior and Mechanism of Hf6Ta2O17 Ceramic as Potential Material for Thermal Barrier Coatings

Sai Liu et al.

Summary: Thermal barrier coatings (TBCs) face a serious threat from calcium-magnesium-alumina-silicate (CMAS) corrosion. The search for new ceramic coatings with excellent resistance to CMAS corrosion for TBCs is ongoing. This study investigates the CMAS corrosion resistance behavior and mechanism of a promising Hf6Ta2O17 ceramic coating. Results show that temperature is the most important factor affecting CMAS behavior and mechanism, with different corrosion products formed at different temperatures.

COATINGS (2023)

Add to Collection

Article Energy & Fuels

Corrosion of superheater materials by alkali chloride salt mixtures-The role of the presence of molten phase

Elisa Hupa et al.

Summary: In biomass combustion, the presence of alkali chlorides lowers the ash deposit melting temperature and can cause aggressive corrosion of superheater materials. This study investigated the impact of different percentages of molten phase on the corrosion of two stainless steel qualities (AISI 347 and 310) and found significant differences in corrosion tendencies depending on the molten phase percentage.

FUEL (2023)

Add to Collection

Review Materials Science, Ceramics

Research progress on hafnium-based thermal barrier coatings materials

Yiming Wu et al.

Summary: Thermal barrier coatings (TBC) are applied to improve the service temperature of hot part components in aero-engines. Hafnium-based materials have shown promise as a new candidate for TBC due to their structure, temperature stability, and thermal conductivity compared to traditional zirconium-based materials. This review summarizes recent progress in the research and development of hafnium-based TBC materials, including the phase stability, thermal and mechanical properties of rare-earth-doped HfO2 and RE hafnate materials. The review also discusses the challenges and future directions for hafnium-based TBC materials.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Biochemistry & Molecular Biology

Long-Term Potentiodynamic Testing and Tribometric Properties of Amorphous Alloy Coatings under Saline Environment

Amjad Iqbal Falak et al.

Summary: This study investigates the electrochemical and frictional properties of plasma-sprayed amorphous coatings on AISI 1035 mild steel. The coatings exhibit excellent corrosion and wear resistance, making them suitable for harsh environments.

MOLECULES (2022)

Add to Collection

Article Materials Science, Ceramics

Oxidation kinetics of atmospheric plasma sprayed environmental barrier coatings

Emine Bakan et al.

Summary: In this study, three different Si/Yb-silicate environmental barrier coating systems were tested under thermal cycling conditions. The results showed that the spray conditions influenced the oxidation protection provided by Yb-silicate, with 325 A being the most effective. Additionally, the surface finish of the Si coating was found to impact the oxidation rate.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Stress corrosion crack initiation and propagation before proceeding to Stage 2 for hydrostatically tested pipeline steels

Shidong Wang et al.

Summary: This study investigated the influence of hydrostatic simulation on the early-stage high-pH stress corrosion crack growth of X65 pipeline steel. Results showed that hydrostatic simulation enhanced the initiation and coalescence of microcracks in the plastic zone, leading to accelerated crack growth. The findings explain why hydrostatic testing retards the growth of large cracks but facilitates the initiation and growth transition of small cracks in the plastic zone.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Materials Science, Coatings & Films

Hot corrosion behavior of double-phase Nd2Zr2O7-YSZ thermal barrier coatings

Damian Migas et al.

Summary: This study investigated the hot corrosion behavior of various Nd2Zr2O7-yttria-stabilized zirconia (YSZ) thermal barrier coatings. The results revealed that in functionally graded systems, only neodymium sulfates and chromite are formed, while in dual-phase coatings, the decomposition of pyrochlore phase generates zirconate phases with lower neodymium contents and fluorite structure.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Physicochemical Properties of Gd2O3-ZrO2-HfO2 Ceramics as Promising Thermal Barrier Coatings

O. N. Doronin et al.

Summary: This study discusses the effects of rare-earth oxides on the thermophysical properties of Gd2O3-ZrO2-HfO2 ceramics and finds that gadolinium oxide and hafnium oxide can stabilize the thermal coefficient of linear expansion of the ceramics, with acceptable values of thermal conductivity at certain proportions.

RUSSIAN JOURNAL OF INORGANIC CHEMISTRY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Hot corrosion behaviors of as-sprayed and laser-remelted YSZ thermal barrier coatings at 950 °C

Z. G. Yang et al.

Summary: The influences of laser remelting treatment on NiCoCrAlY/ZrO2-7 wt.% Y2O3 thermal barrier coatings fabricated via plasma spraying on GH4169 alloy were examined. The as-sprayed TBCs had a lamellar structure with high cracks and porosity, while the laser remelted TBCs had a compact sub-micro sized grains arranged in a stacked structure. The laser remelted TBCs exhibited superior hot corrosion performance as compared to the as-sprayed TBCs.

MATERIA-RIO DE JANEIRO (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Thermal Barrier Coatings-A State of the Art Review

Jayant Gopal Thakare et al.

Summary: Thermal barrier coatings have advanced significantly since their initial development, and are now widely used in various engineering fields. The focus is on improving the life of the underlying substrate through new materials and deposition techniques. There is high potential for further advancement in thermal barrier coatings, with continuous efforts being made to produce improved and durable coatings.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Multicomponent rare-earth cerate and zirconocerate ceramics for thermal barrier coating materials

Ke Ren et al.

Summary: This study synthesized new multicomponent rare-earth cerate ceramics with good phase stability and reduced thermal conductivity, showing their potential as thermal barrier coating materials.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Strain-shock-induced early stage high pH stress corrosion crack initiation and growth of pipeline steels

Shidong Wang et al.

Summary: This study demonstrated for the first time the strain-shock effect associated with steels having discontinuous yielding under load-control, which substantially enhanced the early stage crack initiation and growth in high pH stress corrosion cracking scenarios.

CORROSION SCIENCE (2021)

Add to Collection

Article Materials Science, Ceramics

Nondestructive measurements of residual stress in air plasma-sprayed thermal barrier coatings

Peng Jiang et al.

Summary: A novel approach to indicate delamination in APS TBCs by measuring the residual stress evolution of TGO is proposed and verified by a combination of PLPS and X-ray computed tomography. Mineral-oil impregnating and cold-mount low-shrinkage epoxy-mounting approaches are used to improve detectable signals and X-ray transmission for stress measurement and delamination characterization. The synchronous evolution of TGO residual stress, TGO thickness, and critical microcracks as a function of oxidation time is obtained and correlated, verifying that TBC delamination can be effectively indicated by residual stress evolution of TGO in APS TBCs.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Ultra-low thermal conductivity and enhanced mechanical properties of high-entropy rare earth niobates (RE3NbO7, RE = Dy, Y, Ho, Er, Yb)

Jiatong Zhu et al.

Summary: A novel high-entropy rare earth niobates material has been prepared, showing superior mechanical properties, high thermal expansion coefficient, and ultra-low thermal conductivity, making it a potential alternative for traditional yttria-stabilized zirconia as a new type of thermal barrier coating.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Coatings & Films

Comparison of corrosion behaviors of Sc2O3-CeO2 co-stabilized ZrO2 and YSZ ceramics exposed to CMAS at 1250°C

Jinshuang Wang et al.

Summary: The study revealed that Y3+ in YSZ was easily precipitated and diffused in CMAS environment, leading to phase transition, while CeO2 in SCZ was chemically inert, providing better corrosion resistance and phase stability.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Ceramics

Hot corrosion studies of nanostructured gadolinium zirconate thermal barrier coatings

Bhavesh Ganesan et al.

Summary: This study investigated the hot corrosion resistance of nanostructured GZ TBCs under three different salt mixture environments, showing that EB-PVD coated GZ TBCs can enhance hot corrosion resistance but may experience spallation or weight gain under certain conditions. Microcracks found in the SM2 condition could lead to molten salt infiltration at the coating interface. The formation of dense corrosive products GdVO4 and m-ZrO2 phases after hot corrosion in SM1 and SM3 conditions, absent in SM2 condition, were identified.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Ceramics

Thermal and mechanical properties of Sc2O3-CeO2 co-stabilized zirconia ceramic as promising thermal barrier coating material

Jinshuang Wang et al.

Summary: CeO2 and Sc2O3 co-stabilized ZrO2 ceramics have been studied for their potential application as thermal barrier coatings materials above 1300 degrees C. The Sc0.04Ce0.16Zr0.80O1.98 (4S16CZ) ceramic material showed superior performance in stability and thermal properties in high-temperature environments, suggesting its potential as a promising TBC material.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Mechanical

Tribological and thermal characterization of electron beam physical vapor deposited single layer thin film for TBC application

Raja Velusamy et al.

Summary: The study attempted to develop YSZ and LZ thin film coatings for engine applications, with YSZ showing better thermal properties for TBCs. YSZ coated substrates had higher hardness, lower Coefficient of Friction (COF) and Coefficient of Thermal Expansion (CTE) than LZ and uncoated substrates. Additionally, LZ coated substrates exhibited lower thermal conductivity compared to YSZ and uncoated substrates.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Samarium zirconate: Thermodynamics and vaporization at high temperatures

Viktor A. Vorozhtcov et al.

Summary: The present research studied the vaporization processes and thermodynamic properties of samarium zirconate with pyrochlore structure, confirming its structure through various analysis methods. The study provided data on the Gibbs energy and enthalpy of formation of samarium zirconate from pure oxides at different temperatures.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection

Article Materials Science, Ceramics

The Role of Hafnium in Modern Thermal Barrier Coatings

S. M. Lakiza et al.

Summary: The world's experience in using hafnium in high-temperature thermal barrier coatings, focusing on the top thermal barrier layer and bond coat layer, has been analyzed. Hafnium dioxide can be stabilized by yttria in the top thermal barrier layer, or used as an addition to ZrO2-based coatings. Doping ZrO2 and HfO2 with stabilizers has shown promising results for improving coating properties.

POWDER METALLURGY AND METAL CERAMICS (2021)

Add to Collection

Article Materials Science, Ceramics

Preparation of Pd-doped Y3Al5O12 thermal barrier coatings using cathode plasma electrolytic deposition

Menghao Li et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Ceramics

Thermal cycling performances of multilayered yttria-stabilized zirconia/gadolinium zirconate thermal barrier coatings

Dapeng Zhou et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Coatings with Columnar Microstructures for Thermal Barrier Applications

Georg Mauer et al.

ADVANCED ENGINEERING MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Thermal and mechanical properties of ferroelastic RENbO4 (RE = Nd, Sm, Gd, Dy, Er, Yb) for thermal barrier coatings

Peng Zhang et al.

SCRIPTA MATERIALIA (2020)

Add to Collection

Review Materials Science, Ceramics

Present status and future prospects of plasma sprayed multilayered thermal barrier coating systems

P. G. Lashmi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical and thermal properties of RETaO4 (RE = Yb, Lu, Sc) ceramics with monoclinic-prime phase

Lin Chen et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effectiveness of lanthanum zirconate and Yttria stabilised zirconia freestanding APS thermal barrier coatings against natural CMAS attack at high temperatures

Radhakanta Satpathy et al.

MATERIALS AT HIGH TEMPERATURES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

La2Zr2O7/LaAlO3 composite prepared by mixing precipitated precursors: Evolution of its structure under sintering

Yu Bespalko et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Comparative Analysis on the Structure and Properties of Iron-Based Amorphous Coating Sprayed with the Thermal Spraying Techniques

Amjad Iqbal et al.

COATINGS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

The thermal and mechanical properties of hafnium orthosilicate: Experiments and first-principles calculations

Zhidong Ding et al.

MATERIALIA (2020)

Add to Collection

Article Chemistry, Physical

Thermoelectric Properties of Scandium Sesquitelluride

Dean Cheikh et al.

MATERIALS (2019)

Add to Collection

Article Materials Science, Ceramics

Corrosion behavior of Sc2O3-Y2O3 co-stabilized ZrO2 thermal barrier coatings with CMAS attack

W. Fan et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Materials Science, Ceramics

Thermal and mechanical properties of Ta2O5 doped La2Ce2O7 thermal barrier coatings prepared by atmospheric plasma spraying

Hao Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Annealing on Optical, Mechanical, Electrical Properties and Structure of Scandium Oxide Films

Alexandr Belosludtsev et al.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Composite ceramics thermal barrier coatings of yttria stabilized zirconia for aero-engines

Qiaomu Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

A review on perovskite lanthanum aluminate (LaAlO3), its properties and applications

Muhammad Rizwan et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Materials Science, Ceramics

Effect of Lanthanum Zirconate on High Temperature Resistance of Thermal Barrier Coatings

Le Wang et al.

TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Advances on strategies for searching for next generation thermal barrier coating materials

Bin Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Ceramics

Corrosion products evolution and hot corrosion mechanisms of REPO4 (RE = Gd, Nd, La) in the presence of V2O5 + Na2SO4 molten salt

Lei Guo et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Improved hot corrosion resistance of plasma sprayed YSZ/Gd2Zr2O7 thermal barrier coating over single layer YSZ

P. G. Lashmi et al.

MATERIALS CHARACTERIZATION (2019)

Add to Collection

Article Chemistry, Physical

Gaseous material capacity of open plasma jet in plasma spray-physical vapor deposition process

Mei-Jun Liu et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Engineering, Aerospace

Impermeability of Y3Al5O12 ceramic against molten glassy calcium-magnesium-alumina-silicate

Zhaolu Xue et al.

CHINESE JOURNAL OF AERONAUTICS (2018)

Add to Collection

Article Engineering, Mechanical

Effect of stress state and simultaneous hot corrosion on the crack propagation and fatigue life of single crystal superalloy CMSX-4

L. Brooking et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Article Chemistry, Physical

SrCeO3 as a novel thermal barrier coating candidate for high-temperature applications

Jieyan Yuan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Materials Science, Coatings & Films

Effect of internal oxidation on the interfacial morphology and residual stress in air plasma sprayed thermal barrier coatings

Jishen Jiang et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Coatings & Films

Influence of microstructure on the durability of gadolinium zirconate thermal barrier coatings using APS & SPPS processes

Rishi Kumar et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Coatings & Films

Isothermal oxidation and thermal cyclic behaviors of YSZ and double-layered YSZ/La2Zr2O7 thermal barrier coatings (TBCs)

Kadir Mert Doleker et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Materials Science, Coatings & Films

Synthesis and thermal properties of zirconate, hafnate and cerate of samarium

Marta Mikuskiewicz et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Evaluation of LaAlO3 as top coat material for thermal barrier coatings

N. Vourdas et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural evolution, mechanical properties and degradation mechanism of PS-PVD quasi-columnar thermal barrier coatings exposed to glassy CMAS deposits

Zi-Yue Yu et al.

RARE METALS (2018)

Add to Collection

Proceedings Paper Engineering, Mechanical

LaAlO3 as overlayer in conventional thermal barrier coatings

I. Georgiopoulos et al.

1ST INTERNATIONAL CONFERENCE OF THE GREEK SOCIETY OF EXPERIMENTAL MECHANICS OF MATERIALS (GSEMM) (2018)

Add to Collection

Article Materials Science, Coatings & Films

Hot Corrosion Mechanism in Multi-Layer Suspension Plasma Sprayed Gd2Zr2O7/YSZ Thermal Barrier Coatings in the Presence of V2O5 + Na2SO4

Krishna Praveen Jonnalagadda et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)

Add to Collection

Article Electrochemistry

Effect of CMAS Composition on Hot Corrosion Behavior of Gadolinium Zirconate Thermal Barrier Coating Materials

Wenzhuo Deng et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Add to Collection

Article Materials Science, Ceramics

The influence of Gd doping on thermophysical properties, elasticity modulus and phase stability of garnet-type (Y1-xGdx)3Al5O12 ceramics

Zhaolu Xue et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Coatings & Films

Hot Corrosion Behavior of YSZ and CaZrO3/YSZ Composite Thermal Barrier Coatings in Contact with 50V2O5+50Na2SO4 Salts

Noveed Ejaz et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and thermal properties of RETaO4 (RE = Nd, Eu, Gd, Dy, Er, Yb, Lu) as promising thermal barrier coating materials

Jun Wang et al.

SCRIPTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Coatings & Films

Engineered architectures of gadolinium zirconate based thermal barrier coatings subjected to hot corrosion test

Satyapal Mahade et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Coatings & Films

CMAS behavior of yttrium aluminum garnet (YAG) and yttria-stabilized zirconia (YSZ) thermal barrier coatings

Rishi Kumar et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Review Materials Science, Coatings & Films

Lanthanum zirconate based thermal barrier coatings: A review

Jing Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

In-situ sintering reaction of Al2O3-LaAl11O18-ZrO2 composite

S. M. Naga et al.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of LaMgAl11O19 addition and temperature on the mechanical properties of Al2O3-based ceramics

Hao Tang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Cerium-based oxide coatings

Carlos E. Castano et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2015)

Add to Collection

Article Materials Science, Ceramics

Synthesis and characterization of ceria-yttria co-stabilized zirconia (CYSZ) nanoparticles by sol-gel process for thermal barrier coatings (TBCs) applications

Morteza Hajizadeh-Oghaz et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Coatings & Films

Characterization of Plasma Jet in Plasma Spray-Physical Vapor Deposition of YSZ Using a <80 kW Shrouded Torch Based on Optical Emission Spectroscopy

Qing-Yu Chen et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2015)

Add to Collection

Article Thermodynamics

The impact of a magnesium zirconate thermal barrier coating on homogeneous charge compression ignition operational variability and the formation of combustion chamber deposits

Mark A. Hoffman et al.

INTERNATIONAL JOURNAL OF ENGINE RESEARCH (2015)

Add to Collection

Article Materials Science, Multidisciplinary

The hot corrosion behavior of plasma sprayed zirconia coatings stabilized with yttria, ceria, and titania in sodium sulfate and vanadium oxide

M. H. Habibi et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2015)

Add to Collection

Article Materials Science, Ceramics

Hydrothermal assisted synthesis and hot-corrosion resistance of nano lanthanum zirconate particles

Chaohui Wang et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Materials Science, Ceramics

Hot corrosion behaviors of SrZrO3 ceramic co-doped with Y2O3 and Yb2O3 in molten Na2SO4, V2O5, and Na2SO4 + V2O5 salts mixture

Hongying Dong et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection

Article Materials Science, Ceramics

Thermal conductivity of single- and multi-phase compositions in the ZrO2-Y2O3-Ta2O5 system

Andi M. Limarga et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

On the cyclic hot corrosion behaviour of atmospheric plasma sprayed Lanthanum Zirconate based coatings in contact with a mixture of sodium sulphate and vanadate salts: A comparison with the traditional Ysz duplex and NiCrAlY coated samples

C. S. Ramachandran et al.

VACUUM (2013)

Add to Collection

Article Materials Science, Ceramics

Synthesis and microstructure of Gd2O3-doped HfO2 ceramics

C. K. Roy et al.

CERAMICS INTERNATIONAL (2012)

Add to Collection

Article Materials Science, Ceramics

Characterisation of the microstructure and thermal properties of Nd2Zr2O7 and Nd2Zr2O7/YSZ thermal barrier coatings

G. Moskal et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Add to Collection

Article Materials Science, Ceramics

Evolution of hot corrosion resistance of YSZ, Gd2Zr2O7, and Gd2Zr2O7 + YSZ composite thermal barrier coatings in Na2SO4 + V2O5 at 1050 °C

M. H. Habibi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Hot Corrosion of Metals and Alloys

Fred Pettit

OXIDATION OF METALS (2011)

Add to Collection

Article Materials Science, Ceramics

Structure and thermal properties of heat treated plasma sprayed ceria yttria co-stabilized zirconia coatings

Giovanni Di Girolamo et al.

CERAMICS INTERNATIONAL (2010)

Add to Collection

Article Materials Science, Ceramics

Phase evolution and thermophysical properties of plasma sprayed thick zirconia coatings after annealing

Giovanni Di Girolamo et al.

CERAMICS INTERNATIONAL (2010)

Add to Collection

Review Materials Science, Multidisciplinary

Electrochemical Corrosion Behavior of Nanocrystalline Materials-a Review

Li Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2010)

Add to Collection

Article Materials Science, Ceramics

High-temperature hot corrosion behavior of gadolinium zirconate by vanadium pentoxide and sodium sulfate in air

Zhan-Guo Liu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)

Add to Collection

Article Materials Science, Coatings & Films

From Powders to Thermally Sprayed Coatings

Pierre Fauchais et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2010)

Add to Collection

Article Materials Science, Multidisciplinary

Investigation on the phase stability, sintering and thermal conductivity of Sc2O3-Y2O3-ZrO2 for thermal barrier coating application

Huaifei Liu et al.

MATERIALS & DESIGN (2010)

Add to Collection

Article Materials Science, Coatings & Films

Hot corrosion behavior of rare earth zirconates and yttria partially stabilized zirconia thermal barrier coatings

Zhenhua Xu et al.

SURFACE & COATINGS TECHNOLOGY (2010)

Add to Collection

Article Materials Science, Coatings & Films

Application of Plasma-Sprayed Complex Perovskites as Thermal Barrier Coatings

Maria Ophelia Jarligo et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2009)

Add to Collection

Article Materials Science, Coatings & Films

Recent Developments in the Field of Thermal Barrier Coatings

Robert Vassen et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2009)

Add to Collection

Article Materials Science, Coatings & Films

Vapor deposited samarium zirconate thermal barrier coatings

Hengbei Zhao et al.

SURFACE & COATINGS TECHNOLOGY (2009)

Add to Collection

Article Materials Science, Ceramics

Infiltration-inhibiting reaction of gadolinium zirconate thermal barrier coatings with CMAS melts

Stephan Kraemer et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

Add to Collection

Article Materials Science, Ceramics

Perovskite-type strontium zirconate as a new material for thermal barrier coatings

Wen Ma et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

Add to Collection

Article Materials Science, Coatings & Films

New Generation Perovskite Thermal Barrier Coating Materials

W. Ma et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2008)

Add to Collection

Article Materials Science, Coatings & Films

Thermally Sprayed CaZrO3 Coatings

E. Garcia et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2008)

Add to Collection

Article Materials Science, Coatings & Films

Thermal properties of oxides with magnetoplumbite structure for advanced thermal barrier coatings

Narottam P. Bansal et al.

SURFACE & COATINGS TECHNOLOGY (2008)

Add to Collection

Article Chemistry, Physical

Thermal expansion and defect chemistry of MgO-Doped Sm2Zr2O7

Zhixue Qu et al.

CHEMISTRY OF MATERIALS (2007)

Add to Collection

Article Materials Science, Coatings & Films

Opportunities for TBCs in the ZrO2-YO1.5-TaO2.5 system

Felicia M. Pitek et al.

SURFACE & COATINGS TECHNOLOGY (2007)

Add to Collection

Article Materials Science, Coatings & Films

Effect of the type of flame on the microstructure of CaZrO3 combustion flame sprayed coatings

C. Cano et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Add to Collection

Article Materials Science, Coatings & Films

Residual stresses in thermal barrier coatings measured by photoluminescence piezospectroscopy and indentation technique

X. Zhao et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Add to Collection

Article Materials Science, Coatings & Films

The thermal cycling behavior of Lanthanum-Cerium Oxide thermal barrier coating prepared by EB-PVD

W Ma et al.

SURFACE & COATINGS TECHNOLOGY (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal barrier coating materials

David R. Clarke et al.

MATERIALS TODAY (2005)

Add to Collection

Article Materials Science, Ceramics

Ceramic materials for thermal barrier coatings

XQ Cao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)

Add to Collection

Article Materials Science, Ceramics

Thermal conductivity and thermal expansion coefficients of the lanthanum rare-earth-element zirconate system

H Lehmann et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of alloying elements on hot corrosion of superalloys and coatings: necessity of smart coatings for gas turbine engines

I Gurrappa

MATERIALS SCIENCE AND TECHNOLOGY (2003)

Add to Collection

Article Engineering, Mechanical

Hot corrosion in gas turbine components

N Eliaz et al.

ENGINEERING FAILURE ANALYSIS (2002)

Add to Collection

Article Materials Science, Coatings & Films

Lanthanum hexaaluminate - novel thermal barrier coatings for gas turbine applications - materials and process development

R Gadow et al.

SURFACE & COATINGS TECHNOLOGY (2002)

Add to Collection

Article Materials Science, Coatings & Films

Lanthanum hexaaluminate - a new material for atmospheric plasma spraying of advanced thermal barrier coatings

C Friedrich et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2001)

Add to Collection

Article Engineering, Manufacturing

Hot corrosion of protective coatings

I Gurrappa

MATERIALS AND MANUFACTURING PROCESSES (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.