☆ 4.7 Article

Efficient optimization of parallel micro-channel heat sinks based on flow resistance network model

APPLIED THERMAL ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Mathematical modeling and multi-objective optimization on the rectangular micro-channel heat sink

Xue-shuo Shang et al.

Summary: This study develops a mathematical model of a rectangular microchannel heat sink (MCHS) and derives the thermal resistance using structural parameters based on the differential equation of energy conservation. Both experimental and numerical methods are employed to validate the model. A multiobjective optimization model is also established to simultaneously minimize the thermal resistance and the pumping power. The mathematical model and the multiobjective optimization method are beneficial for the design of an MCHS owing to the high convenience and reliability.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2023)

Add to Collection

Article Thermodynamics

Experimental and numerical investigation on efficient optimization of battery thermal management systems

Jiajun Zhang et al.

Summary: This study proposes a novel optimization method for efficient design of parallel air-cooled battery thermal management systems. The method introduces simplified calculation models and sets the same average temperature of battery cells to obtain optimized structural parameters. Experimental results show that the optimized systems exhibit better heat dissipating performance and a decrease of over 72% in temperature difference.

APPLIED THERMAL ENGINEERING (2023)

Add to Collection

Article Thermodynamics

Flow boiling heat transfer mechanisms and flow characteristics of pump-driven two-phase flow systems used in data center cooling br

Xiaoxuan Chen et al.

Summary: This study experimentally investigated the heat transfer mechanisms, capacity, and flow characteristics of the boiling process in a pump-driven two-phase flow system commonly used in data center cooling. It was found that under the working conditions in this experiment, nucleate boiling was the dominant heat transfer mechanism in both smooth and threaded tubes, and the heat transfer coefficient remained constant as the mass flow rate decreased and vapor quality increased. Furthermore, the threaded tube had little impact on the heat transfer performance, and commonly used coolants R134a and R410A were tested and verified the above conclusions.

APPLIED THERMAL ENGINEERING (2023)

Add to Collection

Article Chemistry, Analytical

Numerical simulation of heat transfer and flow of Al2O3-water nanofluid in microchannel heat sink with cantor fractal structure based on genetic algorithm

Helin Wang et al.

Summary: This study addresses the issue of heat generated during operation of microelectronic devices by using nanofluidic microchannel heat sinks. By incorporating advanced working fluids and channel structures, the heat transfer performance of the heat sink is improved. The effects of different nanofluid volume fractions and geometric parameters on various performance indicators are investigated in the optimized microchannel.

ANALYTICA CHIMICA ACTA (2022)

Add to Collection

Article Thermodynamics

Topology optimization for a water-cooled heat sink in micro-electronics based on Pareto frontier

Anqi Zou et al.

Summary: This study proposes a bi-objective topology optimization method for heat sink design in microelectronics, considering the trade-off between heat transfer and hydraulic performances. A series of Pareto frontiers were generated to select the optimal design, and an analytical formula was obtained for fast determination of weight parameters. The consideration of temperature-dependent physical properties and the validation of a 3D reconstructed model further enhance the effectiveness and robustness of the design method.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

A novel optimization method based on inverse calculation model for efficient design of battery thermal management system

Kai Chen et al.

Summary: An optimization method based on inverse flow resistance network model is proposed for efficient design of parallel battery thermal management systems (BTMS) to enhance cooling performance. After optimization, the temperature difference in battery pack is reduced by at least 55%, and the optimized systems achieve better cooling performance than previous studies.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Thermal Contact Resistance Optimization of Press-Pack IGBT Device Based on Liquid Metal Thermal Interface Material

Xiao Wang et al.

Summary: This article proposes a method to optimize the thermal contact resistances of PP-IGBT devices by filling liquid metal thermal interface materials. The results show that the optimized device reduces the junction-to-case thermal resistance by over 30%, improving the thermal reliability of large-capacity PP-IGBT devices.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

Add to Collection

Article Thermodynamics

A direct optimization strategy based on field synergy equation for efficient design of battery thermal management system

Junsheng Hou et al.

Summary: This study proposes a direct optimization strategy based on field synergy equation for the design of air-cooled battery thermal management system (BTMS). The optimized system design improves thermal stability and uniformity by optimizing flow rate distribution and structural parameters. The results show that the optimization strategy significantly reduces temperature difference and improves cooling performance, which is of great importance for enhancing the performance and safety of battery packs.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

A universal high-efficiency cooling structure for high-power integrated circuits

Han Wang et al.

Summary: This study proposes a universal efficient cooling structure based on Micro-Channel Heat Sink (MCHS) that can be used for both uniform and non-uniform heat dissipation of IC chips. The cooling structure significantly reduces the thermal resistance and mean absolute temperature difference, and has broad application prospects.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Parametric study and optimization of microchannel heat sinks with various shapes

Haluk Anil Kose et al.

Summary: This study numerically investigates laminar single-phase fluid flow and conjugate heat transfer for three different shapes of microchannel heat sinks using Computational Fluid Dynamics (CFD). The study reveals the optimal geometric design variables for efficient microchannel heat sink designs. The results show that the rectangular microchannel configuration has the highest thermal and hydrodynamic performance among the three configurations.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

Experimental and numerical studies on an efficient transient heat transfer model for air-cooled battery thermal management systems

Jiajun Zhang et al.

Summary: An efficient transient heat transfer model is developed in this study for accurately predicting the temperature of battery cells in different types of parallel air-cooled BTMSs. The model results are in good agreement with experimental data and can enhance cooling performance.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Engineering, Multidisciplinary

Multi-objective optimization of a rectangular micro-channel heat sink using the augmented ε-constraint method

Lagouge Tartibu Kwanda

ENGINEERING OPTIMIZATION (2020)

Add to Collection

Article Engineering, Chemical

Reverse optimization algorithm of velocity uniformity in microchannels based on a simplified resistance network model

Chao Li et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Thermodynamics

Thermal performance of double serpentine minichannel heat sinks: Effects of inlet-outlet arrangements and through-holes

Xin Cao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Heat spreading of liquid jet impingement cooling of cold plate heat sink with different fin shapes

Songkran Wiriyasart et al.

CASE STUDIES IN THERMAL ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

Efficiency improvement of the solar PV-system using nanofluid and developed inverter topology

Uvais Mustafa et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)

Add to Collection

Article Thermodynamics

Thermal optimization of radial plate fin heat sinks under an L-shaped flow

Gilho Lee et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Thermodynamics

Effect of jet-plate spacing to jet diameter ratios on nanofluids heat transfer in a mini-channel heat sink

Lursukd Nakharintr et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Review Thermodynamics

Optimization of thermal design of heat sinks: A review

Hamdi E. Ahmed et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Thermodynamics

A New Approach for the Mitigating of Flow Maldistribution in Parallel Microchannel Heat Sink

Ritunesh Kumar et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Engineering, Multidisciplinary

Optimization of the Micro Channel Heat Sink by Combing Genetic Algorithm with the Finite Element Method

David Lin et al.

INVENTIONS (2018)

Add to Collection

Article Thermodynamics

Analysis of micro-channel heat sinks with rectangular-shaped flow obstructions

Gongnan Xie et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2016)

Add to Collection

Article Thermodynamics

Numerical study on layout of micro-channel heat sink for thermal management of electronic devices

Liang Gong et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Shortcut computation for the thermal management of a large air-cooled battery pack

Zhongming Liu et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Article Thermodynamics

Multi-parameters optimization for microchannel heat sink using inverse problem method

Zheng-Hua Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

Add to Collection

Article Thermodynamics

Analytical heat diffusion models for different micro-channel heat sink cross-sectional geometries

Sung-Min Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Physics, Applied

On-chip hot spot cooling using silicon thermoelectric microcoolers

Peng Wang et al.

JOURNAL OF APPLIED PHYSICS (2007)

Add to Collection

Article Mechanics

Periodic boiling in parallel micro-channels at low vapor quality

G. Hetsroni et al.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2006)

Add to Collection

Article Engineering, Environmental

Flow distribution in different microreactor scale-out geometries and the effect of manufacturing tolerances and channel blockage

C Amador et al.

CHEMICAL ENGINEERING JOURNAL (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.