4.7 Article

Co-decoration of WS2 nanosheets with both Au and In2O3-nanoparticles for attaining the CO sensing in self-heating mode

Related references

Note: Only part of the references are listed.
Article Chemistry, Physical

Toxic gas molecules adsorbed on intrinsic and defective WS2: gas sensing and detection

Zhen Cui et al.

Summary: The magnetic and electronic behaviors of toxic gases (CO, NH3, NO, and NO2) adsorbed on intrinsic and defective WS2 were investigated using density functional theory. The adsorption energy of NO-VW/WS2 was lower than that of NO on intrinsic WS2, indicating the potential of VW/WS2 for NO capture. The band gap of defective WS2 was reduced by the adsorption of the toxic gases, and the type of band gap was changed by the introduction of a sulfur defect. Notably, the adsorption of NO2 (NO) transformed the band gap of intrinsic WS2 (VW/WS2) from direct to indirect, while the introduction of NO2 transformed the band gap of VS/WS2 from indirect to direct. Additionally, CO and NH3-VW/WS2 showed shorter recovery times compared to CO and NH3 on intrinsic WS2, making VW/WS2 an ideal reversible sensor for CO and NH3 detection. Overall, the adsorption of gas molecules and the presence of defects can modulate the magnetic and electronic properties of WS2, which is crucial for gas sensing and toxic gas detection.

APPLIED SURFACE SCIENCE (2023)

Article Materials Science, Multidisciplinary

Fabrication of Ni Nanoparticle-Embedded Porous Carbon Nanofibers Through Selective Etching of Selectively Oxidized MgO

Gi-Baek Lee et al.

Summary: The design of the material synthesis process is crucial for the synthesis and application of various materials. In this study, selective oxidation and etching were used to fabricate different metal structures on a carbon nanofiber support, resulting in the formation of a porous structure.

ELECTRONIC MATERIALS LETTERS (2022)

Article Chemistry, Analytical

Selective CO gas sensing by Au-decorated WS2-SnO2 core-shell nanosheets on flexible substrates in self-heating mode

Jae-Hun Kim et al.

Summary: In this study, 2D pristine and Au-decorated WS2-SnO2 core-shell nanosheets were successfully synthesized for highly sensitive CO gas sensing applications. The gas sensors showed very low applied voltage and high performance, with no significant degradation in sensing performance after 10,000 bending cycles, demonstrating great potential for commercial applications.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Article Nanoscience & Nanotechnology

CO sensing properties of nanostructured WSe2/GaN and MoSe2/GaN based gas sensors

Monu Mishra et al.

Summary: The study investigated the sensing properties of GaN and hydrothermal synthesized transition metal di-selenides nanostructure decorated WSe2/GaN and MoSe2/GaN hybrid structures for CO gas detection at different temperatures, showing promising potential for efficient CO detection.

PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2022)

Article Materials Science, Multidisciplinary

First-principles probing of Au-doped WS2 monolayer as a superb CO sensor with high selectivity and fast diffusion

Minming Jiang et al.

Summary: Doping with Au atoms significantly reduces the adsorption energy of CO on WS2 monolayers and forms a new C=S double bond. The WS2/Au monolayer exhibits excellent CO detection sensitivity, while the adsorption and electronic properties for other gases remain relatively unchanged.

MATERIALS TODAY COMMUNICATIONS (2022)

Article Engineering, Environmental

Achievement of self-heated sensing of hazardous gases by WS2 (core)?SnO2 (shell) nanosheets

Jae-Hun Kim et al.

Summary: The study investigated the effects of SnO2 shell thickness and operating voltage on the sensing behavior of WS2 nanosheets, finding that a 15 nm thick shell at 3.4 V was optimal for CO sensing, while a 30 nm thick shell was optimal for NO2 sensing. The engineering design principles can be used to selectively detect reducing gases like CO.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Article Chemistry, Analytical

Synergistic effects of SnO2 and Au nanoparticles decorated on WS2 nanosheets for flexible, room-temperature CO gas sensing

Jae-Hun Kim et al.

Summary: In this study, researchers fabricated WS2 nanosheets decorated with different materials on flexible substrates for CO gas sensing. The sensors exhibited unique responses and high selectivity to CO gas, with the Au-SnO2-co-decorated WS2 nanosheet sensor showing the highest response and selectivity. The presence of Au-WS2 Schottky junctions, SnO2-WS2 heterojunctions, and the catalytic role of Au nanoparticles in sensing CO gas were key factors contributing to the sensor's performance.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Article Chemistry, Analytical

A transparent ZnO nanowire MEMS gas sensor prepared by an ITO micro heater

Ting-Jen Hsueh et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Article Engineering, Electrical & Electronic

SO2 gas sensing characteristics of FET- and resistor-type gas sensors having WO3 as sensing material

Gyuweon Jung et al.

SOLID-STATE ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Lina Cai et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2020)

Article Materials Science, Multidisciplinary

Nano lily-buds garden like ZnO nanostructures based gas sensor for H2 detection

Manjeet Kumar et al.

MATERIALS LETTERS (2019)

Article Nanoscience & Nanotechnology

WS2 and MoS2 thin film gas sensors with high response to NH3 in air at low temperature

Topias Jarvinen et al.

NANOTECHNOLOGY (2019)

Article Chemistry, Analytical

Ultraselective acetone-gas sensor based ZnO flowers functionalized by Au nanoparticle loading on certain facet

Peng Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Analytical

Toluene- and benzene-selective gas sensors based on Pt- and Pd-functionalized ZnO nanowires in self-heating mode

Jae-Hun Kim et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Analytical

Nanoclustered Pd decorated nanocrystalline Zn doped SnO2 for ppb NO2 detection at low temperature

Simona Somacescu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Analytical

Realization of Au-decorated WS2 nanosheets as low power-consumption and selective gas sensors

Jae-Hun Kim et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Analytical

Realization of H2S sensing by Pd-functionalized networked CuO nanowires in self-heating mode

Jin-Young Kim et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Physical

α-Fe2O3 loaded rGO nanosheets based fast response/recovery CO gas sensor at room temperature

Aviru Kumar Basu et al.

APPLIED SURFACE SCIENCE (2019)

Article Materials Science, Ceramics

ZnO-enhanced In2O3-based sensors for n-butanol gas

Dongmin An et al.

CERAMICS INTERNATIONAL (2019)

Review Chemistry, Analytical

Synergistic effects in gas sensing semiconducting oxide nano-heterostructures: A review

Janine M. Walker et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Analytical

Sputtered SnO2:NiO thin films on self-assembled Au nanoparticle arrays for MEMS compatible NO2 gas sensors

Ying Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Chemistry, Analytical

Low power-consumption CO gas sensors based on Au-functionalized SnO2-ZnO core-shell nanowires

Jae-Hun Kim et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Review Chemistry, Analytical

A review on efficient self-heating in nanowire sensors: Prospects for very-low power devices

C. Fabrega et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Chemistry, Analytical

Enhanced room-temperature NH3 gas sensing by 2D SnS2 with sulfur vacancies synthesized by chemical exfoliation

Ziyu Qin et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Chemistry, Analytical

Recent advances on H2 sensor technologies based on MOX and FET devices: A review

Bharat Sharma et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Review Chemistry, Physical

Resistive-type hydrogen gas sensor based on TiO2: A review

Zhong Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Materials Science, Multidisciplinary

Excitation-dependent photoluminescence from WS2 nanostructures synthesized via top-down approach

Shivani Sharma et al.

JOURNAL OF MATERIALS SCIENCE (2017)

Article Engineering, Electrical & Electronic

Highly sensitive, atmospheric pressure operatable sensor based on Au nanoclusters decorated TiO2@Au heterojunction nanorods for trace level NO2 gas detection

Dinesh Veeran Ponnuvelu et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2017)

Article Chemistry, Analytical

Self-heating effects on the toluene sensing of Pt-functionalized SnO2-ZnO core-shell nanowires

Jae-Hun Kim et al.

SENSORS AND ACTUATORS B-CHEMICAL (2017)

Article Chemistry, Analytical

Hierarchical 3D nanostructure of GdInO3 and reduced-graphene-decorated GdInO3 nanocomposite for CO sensing applications

C. Balamurugan et al.

SENSORS AND ACTUATORS B-CHEMICAL (2016)

Article Engineering, Electrical & Electronic

Study on structural and optical behaviors of In2O3 nanocrystals as potential candidate for optoelectronic devices

M. Jothibas et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2015)

Review Chemistry, Analytical

Nanoscale metal oxide-based heterojunctions for gas sensing: A review

Derek R. Miller et al.

SENSORS AND ACTUATORS B-CHEMICAL (2014)

Article Chemistry, Multidisciplinary

Evolution of Electronic Structure in Atomically Thin Sheets of WS2 and WSe2

Weijie Zhao et al.

ACS NANO (2013)

Article Engineering, Environmental

Different nanostructured In2O3 for photocatalytic decomposition of perfluorooctanoic acid (PFOA)

Zhenmin Li et al.

JOURNAL OF HAZARDOUS MATERIALS (2013)