☆ 4.7 Article

Performance improvement of MOCVD grown ZnGa2O4 based NO gas sensors using plasma surface treatment

APPLIED SURFACE SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Investigation of fiber laser-induced porous graphene electrodes in controlled atmospheres for ZnO nanorod-based NO2 gas sensors

Shih-Feng Tseng et al.

Summary: This study focuses on developing fiber laser-induced graphene (LIG) on polyimide films under different atmospheres. ZnO nanorods with a large specific surface area were synthesized via a cost-effective hydrothermal method. LIG surface with porous structures was used as a sensing layer for NO2 gas sensor by drop-casting ZnO nanorod sensing solution. The gas sensor fabricated in air showed outstanding sensing performance with high response (251.71%), fast response and recovery times (9.5 s and 8.3 s, respectively), and response stability at 1000 ppb NO2 concentration. The vacuum-fabricated ZnO gas sensor exhibited excellent sensitivity. These ZnO nanorod/LIG-based gas sensors can be combined with the Internet of Things for real-time detection of harmful gases.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Synthesis of Tb2O3/ZnO composite nanofibers via electrospinning as chemiresistive gas sensor for detecting NO gas

Tao Wei et al.

Summary: Forming composite nanofibers of terbium oxide (Tb2O3) and zinc oxide (ZnO) through electrospinning and annealing resulted in a gas sensor with excellent sensing performance for nitric oxide (NO) gas. The Tb2O3/ZnO composite nanofiber exhibited a high response to 1 ppm NO gas at 180 degrees C, with low response to other interference gases. The sensor also showed good repeatability and long-term stability, indicating the promising potential of ZnO for real applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Highly responsive and selective NO2 gas sensors based on titanium metal organic framework (Ti-MOF) with pyromellitic acid

Chii-Rong Yang et al.

Summary: This study synthesized Ti-MOF(TPA) and Ti-MOF(PMA) powders using a one-step hydrothermal method. The Ti-MOF(PMA) gas sensor showed higher dynamic response than the Ti-MOF(TPA) sensor. The responses of the Ti-MOF(PMA) gas sensors to NO2 at concentrations of 50, 100, 150, and 200 ppm were 6.4, 16.1, 35.6, and 48.5, respectively, at room temperature. The Ti-MOF(PMA) gas sensors exhibited excellent reproducibility and selectivity to NO2 compared to other gases at 100 ppm concentration.

SENSORS AND ACTUATORS A-PHYSICAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Chemiresistive gas sensor based on electrospun hollow SnO2 nanotubes for detecting NO at the ppb level

Peng Su et al.

Summary: Optimization of material structure can lead to the detection of target gases even in old sensing materials. In this study, hollow tin oxide nanotubes (NTs) demonstrated exceptional sensing performance for nitric oxide (NO) at 160 degrees C. The hollow NTs, obtained through direct annealing of electrospun precursor nanofibers, outperformed solid NTs due to their larger surface area. With a response of approximately 33.3 to 500 ppb of NO at 160 degrees C, the hollow NTs also exhibited good repeatability, long-term stability, and excellent selectivity.

VACUUM (2022)

Add to Collection

Article Chemistry, Analytical

Mechanism of Fast NO Response in a WO3-Nanorod-Based Gas Sensor

Giacometta Mineo et al.

Summary: This article reports the hydrothermal synthesis of WO3 nanorods and their application in NO sensing. The study found that WO3 nanorods have fast response and recovery times, which opens the possibility for the development of fast NO sensors based on WO3.

CHEMOSENSORS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering CuMOF in TiO2 Nanochannels as Flexible Gas Sensor for High-Performance NO Detection at Room Temperature

Haoxuan He et al.

Summary: A chemiresistor gas sensor with excellent detection ability and outstanding selective traits has been developed for real-time monitoring of nitric oxide (NO) in asthma, by deliberately introducing metal-organic frameworks (MOFs) in free-standing TiO2 nanochannels at room temperature (RT). The sensor shows remarkable performance with high sensitivity, selectivity, and a detection limit of 140 ppb at RT, making it a promising candidate for gas sensing applications.

ACS SENSORS (2022)

Add to Collection

Article Chemistry, Physical

Selective, sensitive, and stable NO2 gas sensor based on porous ZnO nanosheets

Myung Sik Choi et al.

Summary: Porous ZnO nanosheets were synthesized using a solvothermal method for high sensitivity detection of NO2 gas, showing high selectivity and stability. Enhanced response was attributed to the synergetic effects of high surface area, ZnO/ZnO homojunctions, and structural defects.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Development of high sensitivity LPG and NO2 gas sensor based ZnGa2O4/ graphene nanoplates hybrid structure- A novel approach

V. Munusami et al.

Summary: The report discusses a high-performance LPG gas sensor based on a ZnGa2O4/graphene (ZGO/GR) structure, prepared using a facile hydrothermal approach. The sensors showed excellent sensing performance and high selectivity towards LPG gas.

DIAMOND AND RELATED MATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

N-doped reduced graphene oxide for room-temperature NO gas sensors

Yu-Sung Chang et al.

Summary: In this study, nitrogen-doped reduced graphene oxide (N-rGO) was synthesized to improve gas-sensing properties, particularly in detecting low concentrations of NO gas. The N-rGO sensor exhibited higher sensitivity and better reproducibility compared to the rGO sensor in detecting NO gas.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Highly selective H2S gas sensor based on WO3-coated SnO2 nanowires

Tran Thi Ngoc Hoa et al.

Summary: In this study, WO3-coated SnO2 nanowires were fabricated for H2S gas sensors, showing good sensitivity and selectivity to low-concentration H2S gas at 200 degrees Celsius. The gas-sensing mechanism was discussed based on the n-n heterojunction between n-type SnO2 and n-type WO3, enhancing sensitivity to H2S.

MATERIALS TODAY COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Analytical

Comparative study on the gas-sensing performance of ZnO/SnO2 external and ZnO-SnO2 internal heterojunctions for ppb H2S and NO2 gases detection

Phan Hong Phuoc et al.

Summary: The study explored the gas-sensing performance of composite nanofibers with internal and external hetero-junctions of ZnO-SnO2, revealing enhanced response compared to mixed nanofibers. The gas-sensing mechanism of the hetero-nanojunctions was analyzed, attributing the remarkable gas sensing performance to the formation of internal heterojunctions.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Chemistry, Analytical

A room-temperature NO2 gas sensor based on CuO nanoflakes modified with rGO nanosheets

Haineng Bai et al.

Summary: A gas sensor utilizing CuO/rGO nanoflakes was successfully developed for detecting ppb-level NO2 gas at room temperature. The sensor demonstrated ultrahigh response behavior, fast response time, reliability, and long-term stability. The improved gas-sensing response was attributed to synergistic effects between CuO and rGO.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Influences of Work Function Changes in NO2 and H2S Adsorption on Pd-Doped ZnGa2O4(111) Thin Films: First-Principles Studies

Jen-Chuan Tung et al.

Summary: This work provides a detailed analysis of the gas-sensing performance of Pd-doped ZnGa2O4-based gas sensors. The work function variations of NO2 and H2S molecules on Pd-adsorbed ZnGa2O4(111) were calculated using first-principle calculations. The study shows that Pd-decorated ZnGa2O4(111) is a suitable material in NO2/H2S gas detectors.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Enhancing the Charge Carrier Separation and Transport via Nitrogen-Doped Graphene Quantum Dot-TiO2 Nanoplate Hybrid Structure for an Efficient NO Gas Sensor

G. Murali et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Controlled bridge growth of ZnO nanowires on laser-scribed graphene-based devices for NO gas detection

Cheng-Ying Chou et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Multidisciplinary Sciences

Adjustment of oxygen vacancy states in ZnO and its application in ppb-level NO2 gas sensor

Gaoda Li et al.

SCIENCE BULLETIN (2020)

Add to Collection

Article Chemistry, Analytical

Visible light assisted room-temperature NO2 gas sensor based on hollow SnO2@SnS2 nanostructures

Di Liu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2020)

Add to Collection

Article Chemistry, Physical

In-situ growth of ZnO nanowire arrays on the sensing electrode via a facile hydrothermal route for high-performance NO2 sensor

Xiangxiang Chen et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High Sensitivity of NO Gas Sensors Based on Novel Ag-Doped ZnO Nanoflowers Enhanced with a UV Light-Emitting Diode

You-Ting Tsai et al.

ACS OMEGA (2018)

Add to Collection

Article Chemistry, Physical

Synthesis of ZnO nanosheet arrays with exposed (100) facets for gas sensing applications

Chuanhai Xiao et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Add to Collection

Review Chemistry, Analytical

A Survey on Gas Sensing Technology

Xiao Liu et al.

SENSORS (2012)

Add to Collection

Article Chemistry, Analytical

Discerning specific gas sensing at room temperature by ultrathin SnO2 films using impedance approach

C. A. Betty et al.

SENSORS AND ACTUATORS B-CHEMICAL (2012)

Add to Collection

Article Chemistry, Analytical

UV-assisted alcohol sensing using SnO2 functionalized GaN nanowire devices

Ritu Bajpai et al.

SENSORS AND ACTUATORS B-CHEMICAL (2012)

Add to Collection

Article Chemistry, Analytical

Using a TiO2/ZnO double-layer film for improving the sensing performance of ZnO based NO gas sensor

Chia-Yu Lin et al.

SENSORS AND ACTUATORS B-CHEMICAL (2011)

Add to Collection

Article Physics, Applied

UV-activated room-temperature gas sensing mechanism of polycrystalline ZnO

Shan-Wei Fan et al.

APPLIED PHYSICS LETTERS (2009)

Add to Collection

Article Biochemical Research Methods

Exhaled nitric oxide in asthma: progress since the introduction of standardized methodology

Natalia M. Grob et al.

JOURNAL OF BREATH RESEARCH (2008)

Add to Collection

Article Neurosciences

Differential mechanisms underlying the modulation of delayed-rectifier K+ channel in mouse neocortical neurons by nitric oxide

NLR Han et al.

JOURNAL OF NEUROPHYSIOLOGY (2006)

Add to Collection

Article Chemistry, Analytical

Cr-doped TiO2 gas sensor for exhaust NO2 monitoring

AM Ruiz et al.

SENSORS AND ACTUATORS B-CHEMICAL (2003)

Add to Collection

Review Materials Science, Multidisciplinary

Plasma-surface modification of biomaterials

PK Chu et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.