4.6 Article

Omnidirectional strain sensing using single flexible acoustic wave device with machine-learning algorithm

Related references

Note: Only part of the references are listed.
Review Physics, Applied

Flexible and wearable acoustic wave technologies

Jian Zhou et al.

Summary: Flexible and wearable acoustic wave technology has gained tremendous attention due to its wide applications in wearable electronics, sensing, acoustofluidics, and lab-on-a-chip. This review provides an overview of the advances in fundamental principles, design, fabrication, and applications of flexible and wearable acoustic wave devices. The challenges in material selections and structural designs for high-performance devices are discussed, along with recent advances in fabrication strategies and performance evaluation. Key applications in wearable sensors, acoustofluidics, and lab-on-a-chip systems are highlighted, and future perspectives in this field are discussed.

APPLIED PHYSICS REVIEWS (2023)

Article Chemistry, Multidisciplinary

Heterogeneous Structure Omnidirectional Strain Sensor Arrays With Cognitively Learned Neural Networks

Jun Ho Lee et al.

Summary: A omnidirectional strain perception platform utilizing a stretchable strain sensor array and a machine learning-based neural network classification algorithm is proposed, which can accurately detect both the intensity and direction of strain with high sensitivity and reliability.

ADVANCED MATERIALS (2023)

Article Physics, Applied

Machine learning empowered thin film acoustic wave sensing

Kaitao Tan et al.

Summary: This study proposes a method to extract critical information from scattering parameters and combine machine learning to achieve multi-parameter decoupling in thin film-based SAW sensors.

APPLIED PHYSICS LETTERS (2023)

Article Agriculture, Multidisciplinary

Prediction of laying hen house odor concentrations using machine learning models based on small sample data

Yu Liu et al.

Summary: This study compared three machine learning models to predict odor in laying hen houses, finding that the XGBoost model had the highest prediction ability and accuracy, with NH3 concentration being the most important factor. Timely odor monitoring and environmental management in laying hen farms could be improved with the use of the XGBoost model.

COMPUTERS AND ELECTRONICS IN AGRICULTURE (2022)

Article Engineering, Mechanical

Multiaxial fatigue behaviour and damage mechanisms of P92 steel under various strain amplitudes and strain ratios at high temperature

Ning Gao et al.

Summary: High temperature multiaxial fatigue tests were performed at 600 degrees C with different strain amplitudes and strain ratios. The cyclic deformation and damage mechanisms were analyzed using dynamic strain ageing (DSA) analysis and microstructure characterization. The results indicate that increasing strain amplitude and strain ratio accelerate cyclic softening. The DSA behavior depends on strain amplitude, strain ratio, and loading direction. Moreover, increasing strain amplitude promotes subgrain growth and dislocation structure transformation, while increasing strain ratio promotes planar slip of dislocation.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

Article Engineering, Electrical & Electronic

Surface Acoustic Wave Strain Sensor With Ultra-Thin Langasite

Jikai Zhang et al.

Summary: This paper proposes an ultra-thin LGS SAW sensor with extended strain range and improved sensing accuracy in complex environments. The sensor utilizes a thin substrate and a custom calibration algorithm to achieve these improvements. The mechanism of temperature effects on strain sensitivity is investigated, and a new calibration method is developed to eliminate temperature effects.

IEEE SENSORS JOURNAL (2022)

Article Nanoscience & Nanotechnology

A new strategy to minimize humidity influences on acoustic wave ultraviolet sensors using ZnO nanowires wrapped with hydrophobic silica nanoparticles

Yihao Guo et al.

Summary: A new strategy was proposed to minimize the influence of humidity on ZnO NW-based UV sensors by using ZnO NWs wrapped with hydrophobic silica nanoparticles as the effective sensing layer. The sensor showed good UV sensitivity, linearity, and repeatability.

MICROSYSTEMS & NANOENGINEERING (2022)

Article Multidisciplinary Sciences

Chip-less wireless electronic skins by remote epitaxial freestanding compound semiconductors

Yeongin Kim et al.

Summary: Recent advances in flexible and stretchable electronics have led to the development of electronic skin (e-skin)based health monitoring platforms. Conventional wireless e-skins use rigid integrated circuit chips, while chip-less wireless e-skins use surface acoustic wave sensors made of piezoelectric materials, which offer highly sensitive, low-power, and long-term sensing capabilities for monitoring strain, ultraviolet light, and ion concentrations in sweat. These findings provide new routes for creating inexpensive and versatile wireless health monitoring devices.

SCIENCE (2022)

Article Engineering, Electrical & Electronic

Strategy to minimize bending strain interference for flexible acoustic wave sensing platform

Jian Zhou et al.

Summary: This study proposes a new strategy to minimize the effects of mechanical bending strains on flexible acoustic wave sensors. By optimizing off-axis angles, the interference caused by bending can be greatly reduced, allowing for accurate sensing of humidity and ultraviolet light even under bending conditions.

NPJ FLEXIBLE ELECTRONICS (2022)

Article Nanoscience & Nanotechnology

Flexible thin-film acoustic wave devices with off-axis bending characteristics for multisensing applications

Zhangbin Ji et al.

Summary: Flexible surface acoustic wave devices were fabricated using AlN films and their complex deformation behaviors were systematically investigated. A theoretical model was developed to analyze the characteristics of the device under bending and off-axis deformation, showing relationships between frequency shifts and bending strain/off-axis angle. Proof-of-concept demonstrations were performed to showcase multisensing potential, monitoring human wrist movements and detecting UV light intensities.

MICROSYSTEMS & NANOENGINEERING (2021)

Article Engineering, Electrical & Electronic

Flexible Strain Sensor Based on Ultra-Thin Quartz Plate

Bin Feng et al.

Summary: A SAW flexible strain sensor based on ultra-thin AT-X quartz plate with high sensitivity, excellent linearity, and resolution, as well as low temperature coefficient of frequency, has been developed in this study. This new sensor paves the way for the fabrication of high-performance strain sensing devices.

IEEE SENSORS JOURNAL (2021)

Article Chemistry, Multidisciplinary

Piezoelectric Smart Patch Operated with Machine-Learning Algorithms for Effective Detection and Elimination of Condensation

Qian Zhang et al.

Summary: A smart patch based on ZnO/aluminum has been proposed for timely detection and elimination of surface condensation in various industries, showing good detection performance with a machine-learning algorithm. The principle of accelerating evaporation was investigated, revealing the dominant role of dielectric heating and a high linearity relationship between evaporation rate and input power. The flexible device has been proven effective in preventing condensation with an input power of around 0.6 W.

ACS SENSORS (2021)

Article Nanoscience & Nanotechnology

Flexible and Transparent Aluminum-Nitride-Based Surface-Acoustic-Wave Device on Polymeric Polyethylene Naphthalate

Leonardo Lamanna et al.

ADVANCED ELECTRONIC MATERIALS (2019)

Article Engineering, Electrical & Electronic

Highly Sensitive Surface Acoustic Wave Flexible Strain Sensor

Qing Li et al.

IEEE ELECTRON DEVICE LETTERS (2019)

Article Engineering, Electrical & Electronic

Flexible dual-mode surface acoustic wave strain sensor based on crystalline LiNbO3 thin film

Hongsheng Xu et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)

Article Physics, Applied

Flexible surface acoustic wave strain sensor based on single crystalline LiNbO3 thin film

Hongsheng Xu et al.

APPLIED PHYSICS LETTERS (2018)

Article Engineering, Electrical & Electronic

Thin-film flexible sensor for omnidirectional strain measurements

Daniel Zymelka et al.

SENSORS AND ACTUATORS A-PHYSICAL (2017)

Article Chemistry, Analytical

Flexible and bendable acoustofluidics based on ZnO film coated aluminium foil

Yong Liu et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Article Physics, Applied

Bendable ZnO thin film surface acoustic wave devices on polyethylene terephthalate substrate

Xingli He et al.

APPLIED PHYSICS LETTERS (2014)

Article Engineering, Multidisciplinary

Sensing sheet: the sensitivity of thin-film full-bridge strain sensors for crack detection and characterization

S-T Tung et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2014)

Article Materials Science, Multidisciplinary

Bendable transparent ZnO thin film surface acoustic wave strain sensors on ultra-thin flexible glass substrates

Jinkai Chen et al.

JOURNAL OF MATERIALS CHEMISTRY C (2014)

Article Computer Science, Interdisciplinary Applications

Regression and multilayer perceptron-based models to forecast hourly O3 and NO2 levels in the Bilbao area

E Agirre-Basurko et al.

ENVIRONMENTAL MODELLING & SOFTWARE (2006)

Article Materials Science, Multidisciplinary

Acoustoelastic effect in anisotropic layered structures

AV Osetrov et al.

PHYSICAL REVIEW B (2000)