4.6 Article

for elastic parameters calculation of (Mg1/3Ni1/3Co1/3 Determination of cations distribution from XPS measurements )Fe2-xGdxO4 nanoparticles

Related references

Note: Only part of the references are listed.
Article Chemistry, Inorganic & Nuclear

Influence of Mg2+and Ce3+substituted on synthesis, structural, morphological, electrical, and magnetic properties of cobalt nano ferrites

K. L. V. Nagasree et al.

Summary: Mg2+ and Ce3+ doped Cobalt ferrites were synthesized using the sol-gel auto combustion method. Structural analysis was done using XRD, FESEM, and FTIR. The results showed the formation of spinel cubic structure. High dopant concentrations resulted in increased DC electrical resistance. Substituting Mg2+ and Ce3+ cations at specific sites yielded high-resistance materials with decreased dielectric constant and loss. AC conductivity was lower than the parent material. Magnetic studies showed increased magnetization values and coercivity with higher dopant concentrations.

INORGANIC CHEMISTRY COMMUNICATIONS (2023)

Article Polymer Science

Study of Structural and Optical Properties of Cu-Cr Substituted Mg-Co Spinel Ferrites for Optoelectronic Applications

Darine Harrabi et al.

Summary: We have investigated the effects of sintering temperature on the structural and optical properties of Mg0.6Co0.2Cu0.2FeCrO4 spinel ferrites. The results show that the unit cell parameters, crystallite size, and band gap energy increase with increasing sintering temperature. The optical transitions in the prepared samples are found to be direct, and the decrease in band gap energy and low Urbach energy suggest high sample quality and reduced degree of disorder and defects with increasing sintering temperature. Furthermore, the variations of optical constants with wavelength reveal the importance of the prepared samples in optoelectronic applications.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2023)

Article Materials Science, Ceramics

Synthesis and magneto-optical studies of novel Ni0.5Zn0.5Fe2O4/Zn0.95Co0.05O nanocomposite as a candidate for photocatalytic applications

W. Chehade et al.

Summary: This study presents the preparation and characterization of novel nanocomposites, confirming their high purity and crystallinity through various techniques such as XRD, TEM, UV-vis, and XPS. The materials showed well-dispersed spherical nanoparticles and soft ferromagnetic behavior, making them suitable for potential applications in photocatalysis.

CERAMICS INTERNATIONAL (2022)

Article Materials Science, Ceramics

Composition tunable manganese-doped magnetite microwave absorber composites for radio frequency identification communication

Shivam Gupta et al.

Summary: This study synthesized composition tunable MnXFe3_XO4 nanoparticles through manganese doping and investigated their physical properties and microwave absorption ability. At the optimized manganese content, the composite mat exhibited low reflectance and transmission losses, achieving efficient microwave absorption and improving the read count between the RFID tag and metal surface, showing potential application prospects.

CERAMICS INTERNATIONAL (2022)

Article Chemistry, Multidisciplinary

Impact of Gd3+ and Nd3+ ions substitution on structural and magnetic properties of Co0.5Ni0.5Fe2O4 ferrite system

P. Geetha et al.

Summary: Co0.5Ni0.5(Gd/Nd)xFe(2-x)O(4) ferrites were prepared by the solid-state reaction method and characterized. The substitution of Gd and Nd changed the lattice constant and crystallite size of the ferrites, with the Gd-doped sample showing the highest saturation magnetization (Ms) value.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

Article Physics, Condensed Matter

Structural, elastic and magnetic properties of Ca doped copper ferrite nanoparticles

P. Raji et al.

Summary: Calcium doped Copper ferrite nanoparticles were synthesized and their structural, elastic and magnetic properties were investigated. The results showed that calcium doping can affect the crystallite size, shape and magnetic behavior of copper ferrite.

PHYSICA B-CONDENSED MATTER (2022)

Article Materials Science, Multidisciplinary

Enhancement of the magnetic and optical properties of Ni0.5Zn0.5Fe2O4 nanoparticles by ruthenium doping

H. Basma et al.

Summary: This study reports the characterization of Nanosized Ni0.5Zn0.5RuxFe2-xO4 prepared using the wet chemical coprecipitation method. The results show an increase in particle size with high Ru3+ doping and successful substitution of Fe3+ with Ru3+ ions. Furthermore, the Ru3+ doping perturbs the band structure, affecting the photoluminescence behavior.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2022)

Article Physics, Multidisciplinary

Investigation of the structural and electrical properties of CdO/(Bi, Pb)-2212 superconducting phase

H. Basma et al.

Summary: This study investigates the effect of CdO nanoparticles on the (Bi, Pb)-2212 superconducting phase. The addition of CdO enhances grain connectivity and improves the superconducting transition temperature and critical current density, with the optimal effect observed at x = 0.05 wt% CdO.

PHYSICA SCRIPTA (2022)

Article Chemistry, Physical

Electrochemical, oxygen evolution reaction and photoelectrochemical water splitting activity of Ca-doped MgFe2O4 nanoparticles

Ala Manohar et al.

Summary: In this study, Ca2+-doped MgFe2O4 nanoparticles were synthesized and characterized as electrodes for supercapacitor and photoelectrochemical (PEC) water splitting applications. The results showed that Ca2+-doped MgFe2O4 nanoparticles exhibited high specific capacitance in 1 M KOH electrolyte, making them favorable electrodes for supercapacitor applications. Additionally, the Ca2+-doped MgFe2O4 nanoparticles were found to have potential as electrocatalysts for PEC water splitting.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Article Chemistry, Multidisciplinary

Effect of Sm3+ substitution on dc electrical resistivity and magnetic properties of Ni-Co ferrites

B. Suryanarayana et al.

Summary: Sm3+ substituted Ni-Co ferrite materials were prepared by the solid-state method. The samples exhibited a single-phase cubic spinel structure, with fluctuations in crystallite size and lattice parameters as a function of Sm content. SEM analysis showed a uniform distribution of grains and a decrease in grain size with increasing samarium concentration. FTIR spectra confirmed the spinel nature of the samples, while temperature coefficient and DC electrical resistivity measurements indicated their semiconducting nature. The saturation magnetization of the samples initially decreased and then increased with Sm concentration. These properties demonstrate the potential applicability of the materials in various electronic devices.

JOURNAL OF THE INDIAN CHEMICAL SOCIETY (2022)

Article Materials Science, Multidisciplinary

A mini-review on AFe2O4 (A = Zn, Mg, Mn, Co, Cu, and Ni) nanoparticles: Photocatalytic, magnetic hyperthermia and cytotoxicity study

Ala Manohar et al.

Summary: The particle size of spinel ferrite nanoparticles plays a crucial role in determining their properties and behavior in biomedical applications. This review focuses on the role of nanoparticle size in various biomedical applications, including induction heating, photocatalysis, and cytotoxicity. The review also discusses the biocompatibility properties and potential applications of spinel ferrite nanoparticles in medicine and the environment.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Review Chemistry, Multidisciplinary

Insights on magnetic spinel ferrites for targeted drug delivery and hyperthermia applications

Mohamed Ibrahim Ahmed Abdel Maksoud et al.

Summary: Magnetic spinel ferrite nanoparticles (SFNPs) have attracted significant attention in the field of biomedicine due to their potential applications in cancer therapy, such as magnetic hyperthermia and targeted drug delivery. Their excellent properties, including size and surface morphology control, magnetism, heat induction, biocompatibility, and targeting capacity, make them effective tools for clinical diagnosis and treatment of diseases. This review focuses on the anticancer properties of SFNPs and their recent applications in cancer therapy, highlighting their potential in hyperthermia and targeted drug delivery.

NANOTECHNOLOGY REVIEWS (2022)

Article Materials Science, Ceramics

Synthesis, structure and supercapacitive behavior of spinel NiFe2O4 and NiO@NiFe2O4 nanoparticles

Yujie Zhang et al.

Summary: The study found that suitable surfactants and reaction conditions can improve the performance of nanocrystalline spinel materials as supercapacitor electrodes, with the NiO@NiFe2O4 composite material exhibiting higher capacitance and better electrochemical stability. Theoretical calculations were also performed to provide more insights into the electrochemical performance.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Ceramics

A comparative study of different concentrations of (Co/Ni/Cu) effects on elastic properties of Li-Mn ferrite employing IR spectroscopy and ultrasonic measurement

S. A. Mazen et al.

Summary: Three series of divalent ions (Co2+/Ni2+/Cu2+) were substituted into lithium-manganese ferrites and their elastic properties were investigated using two different methods: infrared spectroscopy and ultrasonic pulse transmission. Elastic moduli calculated from IR spectroscopy were larger than those from UPT measurements, but were adjusted for porosity to show similar trends. Elastic parameters improved significantly for Li-Mn-Co and Li-Mn-Ni ferrites compared to Li-Mn-Cu ferrite. Higher elastic moduli values were obtained in Li-Mn-Co spinel ferrites, indicating their suitability for use in core shapes. Two methods were used to evaluate the Debye temperature of all compositions.

CERAMICS INTERNATIONAL (2021)

Article Materials Science, Multidisciplinary

Synthesis and magnetic properties of Ni0.5MgxZn0.5-xFe2O4 (0.0 ≤ x ≤ 0.5) nanocrystalline spinel ferrites

F. A. Hezam et al.

Summary: This study reported the structural and magnetic properties of Ni0.5Mg Zn0.5-xFe2O4 nanocrystalline ferrites synthesized via the co-precipitation method. The ferrites exhibited superparamagnetic behavior and were found to be sensitive to the Mg2+ and Zn2+ contents.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Article Materials Science, Multidisciplinary

Synthesis and characterization of ZnFe2O4/Mn2O3 nanocomposites

A. Aridi et al.

Summary: In this study, ZnFe2O4/Mn2O3 nanocomposites were synthesized with varying Mn2O3 content, showing excellent optical, electrical, and magnetic properties. The nanocomposite with 10% Mn2O3 exhibited the highest photocatalytic activity and DC conductivity, while displaying weak ferromagnetic behavior at room temperature.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)

Article Chemistry, Multidisciplinary

Optimization of structure-property relationships in nickel ferrite nanoparticles annealed at different temperature

Sanjeet Kumar Paswan et al.

Summary: This report presents a detailed analysis of the impact of annealing temperature on the structural, magnetic, and optical properties of NiFe2O4 nanoparticles. Various analytical methods were used to study the changes in the nanoparticles with annealing temperature.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2021)

Article Materials Science, Multidisciplinary

The effect of cation distribution on the magnetic properties of CoFe2O4 nanoparticles

Sitchai Hunpratub et al.

Summary: CoFe2O4 nanoparticles were synthesized at different pH values, showing differences in crystalline phase purity, grain size, and lattice constant. The chemical valence states of Fe and Co ions were found to be 3+ and 2+, respectively, with migration between different sites depending on particle size. The saturation magnetization results were influenced by cation distribution, particle size, and impurities, with pH 11 sample showing the highest saturation magnetization value.

RESULTS IN PHYSICS (2021)

Article Materials Science, Multidisciplinary

Characterization of CdO nanoparticles prepared by co-precipitation method under different pH and calcination temperatures

S. Abbas et al.

Summary: Different preparation conditions, including temperature and pH, had a significant impact on the physical properties of CdO nanoparticles. Increasing temperature enhanced the crystallinity and particle size, while pH variation led to incomplete reduction of CdO. Optical properties were found to be dependent on particle size and temperature, whereas magnetic properties showed a combination of diamagnetic and ferromagnetic contributions for all samples.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)

Article Physics, Multidisciplinary

Correlations between microstructural and magnetic properties of Gd3+-doped spinel ferrite nanoparticles

Mritunjoy Prasad Ghosh et al.

EUROPEAN PHYSICAL JOURNAL PLUS (2020)

Article Materials Science, Multidisciplinary

Magnetic, elastic, dielectric, microwave absorption and optical characterization of cobalt-substituted nickel spinel ferrites

Kunal Pubby et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)

Article Physics, Applied

Correlation Between Structural, Magnetic and Dielectric Properties of Microwave Sintered Ni-Zn-Al Nanoferrites

Chandra Sekhar Ega et al.

JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM (2019)

Article Chemistry, Multidisciplinary

Microstructural and magnetic characterization of Ni0.5Zn0.5Fe2O4 ferrite nanoparticles

A. Bajorek et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2019)

Article Materials Science, Multidisciplinary

Influence of grain size and porosity on X-band properties of Mn-Zr substituted Ni-Co ferrites

Kunal Pubby et al.

MATERIALS LETTERS (2019)

Article Materials Science, Multidisciplinary

Influence of lead fluoride on the mechanical properties of (Cu0.5Tl0.5): 1223 Phase

H. AbuHlaiwa et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)

Article Chemistry, Physical

Impact of collected sunlight on ZnFe2O4 nanoparticles for photocatalytic application

N. G. Yadav et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)

Article Materials Science, Multidisciplinary

Cobalt substituted nickel ferrites via Pechini's sol-gel citrate route: X-band electromagnetic characterization

Kunal Pubby et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2018)

Article Physics, Condensed Matter

Effect of Ce-substitution on structural, morphological, magnetic and DC electrical resistivity of Co-ferrite materials

Tulu Wegayehu Mammo et al.

PHYSICA B-CONDENSED MATTER (2018)

Proceedings Paper Multidisciplinary Sciences

Dislocation, crystallite size distribution and lattice strain of magnesium oxide nanoparticles

I. W. Sutapa et al.

2ND INTERNATIONAL CONFERENCE ON SCIENCE (ICOS) (2018)

Article Chemistry, Physical

A facile method for reduced CoFe2O4 nanosheets with rich oxygen vacancies for efficient oxygen evolution reaction

Kai-Li Yan et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Spectroscopy

Determination of the cation site distribution of the spinel in multiferroic CoFe2O4/BaTiO3 layers by X-ray photoelectron spectroscopy

T. Aghavnian et al.

JOURNAL OF ELECTRON SPECTROSCOPY AND RELATED PHENOMENA (2015)

Article Chemistry, Physical

Elastic properties of nanocrystalline aluminum substituted nickel ferrites prepared by co-precipitation method

S. M. Patange et al.

JOURNAL OF MOLECULAR STRUCTURE (2013)

Article Chemistry, Physical

Magnetic properties of thermal plasma synthesized nanocrystalline nickel ferrite (NiFe2O4)

Ashok B. Nawale et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Article Materials Science, Multidisciplinary

Study of gadolinia-doped ceria solid electrolyte surface by XPS

Pradyot Datta et al.

MATERIALS CHARACTERIZATION (2009)

Article Materials Science, Multidisciplinary

Sol-gel route of synthesis of nanoparticles of MgFe2O4 and XRD, FTIR and VSM study

A. Pradeep et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2008)

Article Physics, Condensed Matter

Cation distribution in NixMg1-xFe2O4 studied by XPS and Mossbauer spectroscopy

VK Mittal et al.

SOLID STATE COMMUNICATIONS (2006)