☆ 4.7 Article

Analysis of flatness and critical crown of hot-rolled strip based on thermal-mechanical coupled residual stress analytical model

APPLIED MATHEMATICAL MODELLING (2024)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Residual stress control of hot-rolled strips during run-out table cooling

Hao Wu et al.

Summary: This study proposed two residual stress control methods based on model calculation: water flow central crown and center wave compensation control. The former mainly controls the uniformity of strip transverse temperature and microstructure, while the latter is controlled by mutual compensation of internal stresses. The results showed that the center wave compensation control method is more effective in reducing residual stress and improving flatness.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

Add to Collection

Article Thermodynamics

Analytical model for temperature prediction of hot-rolled strip based on symplectic space Hamiltonian system

Hao Wu et al.

Summary: This study focused on predicting the temperature distribution of steel strips during run-out table cooling. An analytical model, different from traditional ones, was presented, which introduced the two-dimensional heat conduction equation into the symplectic space Hamiltonian system. The symplectic analytical solution of the two-dimensional temperature field was calculated without any assumptions or predetermination of the solution forms. The accuracy of the symplectic analytical solution was verified by comparing with the computed results from a finite element model.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

Add to Collection

Article Engineering, Multidisciplinary

Analytical model of hot-rolled strip residual stress and flatness in run-out table cooling

Hao Wu et al.

Summary: This study investigates the formation mechanism of residual stress induced by incompatible deformation caused by temperature and phase transformation in the run-out table cooling stage of hot-rolled strip based on the fiber rods model. It also establishes an analytical model for calculating residual stresses at different run-out table cooling stages and introduces a strip buckling model to explore the relationship between residual stress and flatness defects. The accuracy of the analytical model is verified through a multi-field coupled finite element model based on the validation of measured data, and the distribution of residual stress calculated by the analytical model is consistent with the finite element model.

APPLIED MATHEMATICAL MODELLING (2023)

Add to Collection

Article Automation & Control Systems

Numerical analysis of the strip crown inheritance in tandem cold rolling by a novel 3D multi-stand FE model

Lianjie Li et al.

Summary: The researchers propose a new method for calculating the strip crown inheritance factor and quantitatively analyze the effects of entry strip crown on exit strip crown and flatness using a three-dimensional finite element model. The results show that the strip crown inheritance factor is closely related to strip plastic rigidity and is influenced by pass reduction and strip plastic rigidity.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

Modelling stress relaxation after hot deformation: Microstructure-property relationships in Nb-bearing steels

Jianwei Zhao et al.

Summary: Stress relaxation after hot deformation is modeled by considering various physical phenomena, including dislocation recovery, recrystallization, and precipitation. The model incorporates new formulations, such as a vacancy-mediated dislocation climb approach for dislocation recovery. The softening behavior of 6 microalloyed steel grades is tracked and compared with experimental data. The approach is also discussed for its application in additive manufacturing microstructural relaxation.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Engineering, Manufacturing

Predicting stress and flatness in hot-rolled strips during run-out table cooling

Hao Wu et al.

Summary: This study investigates the evolution of stress and flatness of steel strips during run-out table cooling by establishing a finite element model. The results show that uneven stress distribution during the cooling process can cause flatness defects, and the degree of edge wave is related to the initial temperature drop distance in the edge region of the strip.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Engineering, Manufacturing

Influence mechanism of rolling force on strip shape during tandem hot rolling using a novel 3D multi-stand coupled thermo-mechanical FE model

Lianjie Li et al.

Summary: This study proposes a novel 3D multi-stand coupled thermo-mechanical finite element model to investigate the influence of rolling force on strip shape during tandem hot rolling. It was found that the rolling force increases strip crown, but the regulation efficiency decreases with the increase of stand. Additionally, lateral metal flow and strip plastic rigidity have a coupled effect on the regulation efficiency of rolling force on strip flatness.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Engineering, Multidisciplinary

On new buckling solutions of moderately thick rectangular plates by the symplectic superposition method within the Hamiltonian-system framework

Chao Zhou et al.

Summary: This paper introduces a novel approach for exploring analytic buckling solutions of non-Levy-type moderately thick rectangular plates, providing a solid foundation for exploring new solutions of similar problems due to its strictness and accuracy.

APPLIED MATHEMATICAL MODELLING (2021)

Add to Collection

Article Automation & Control Systems

Roll crown control capacity of sextic CVC work roll curves in plate rolling process

Jingguo Ding et al.

Summary: The introduction of sextic CVC roll shape curve has significantly improved the control ability of plate crown in the plate rolling process, enhancing the performance of quadratic, quartic, and quintic crowns.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Mechanical

New analytic buckling solutions of side-cracked rectangular thin plates by the symplectic superposition method

Zhaoyang Hu et al.

Summary: This paper presents a first attempt to extend an up-to-date symplectic superposition method to linear buckling of side-cracked rectangular thin plates. The problems are introduced into the Hamiltonian system, and a side-cracked plate is then divided into several sub-plates that are analytically solved by the symplectic superposition method. The final analytic solution of a side-cracked plate is obtained by integration of the solutions of the sub-plates, providing a rational approach to exploring more analytic solutions without predetermination of solution forms.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Industrial

Mechanism of lateral metal flow on residual stress distribution during hot strip rolling

Jianwei Zhao et al.

Summary: During hot strip rolling, lateral metal flow can reduce the risk of buckling deformation by changing the longitudinal residual stress. The self-correcting effect of lateral metal flow on residual stress was confirmed through experiments, indicating that metals tend to flow towards the direction helping reduce the maximum residual compressive stress.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Multidisciplinary

Analysis of lateral metal flow-induced flatness deviations of rolled steel strip: Mathematical modeling and simulation experiments

Qinglong Wang et al.

APPLIED MATHEMATICAL MODELLING (2020)

Add to Collection

Article Engineering, Industrial

High precision shape model and presetting strategy for strip hot rolling

Jianwei Zhao et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Residual stress on the run out table accounting for multiphase transitions and transformation induced plasticity

Daniel Weisz-Patrault et al.

APPLIED MATHEMATICAL MODELLING (2018)

Add to Collection

Article Engineering, Multidisciplinary

On new analytic free vibration solutions of rectangular thin cantilever plates in the symplectic space

Rui Li et al.

APPLIED MATHEMATICAL MODELLING (2018)

Add to Collection

Article Engineering, Civil

Numerical analysis of temperature and residual stresses in hot-rolled steel strip during cooling in coils

Szczepan Witek et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2018)

Add to Collection

Article Engineering, Manufacturing

Numerical and experimental analysis of strip cross-directional control and flatness prediction for UCM cold rolling mill

Qing-Long Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

Add to Collection

Article Engineering, Civil

Numerical modeling and experimental identification of residual stresses in hot-rolled strips

A. Milenin et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2016)

Add to Collection

Article Engineering, Mechanical

Symplectic superposition method for new analytic buckling solutions of rectangular thin plates

Bo Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Prediction of Steady-State Strip Profile in Flat Rolling

Jae Sang Lee et al.

STEEL RESEARCH INTERNATIONAL (2016)

Add to Collection

Article Engineering, Mechanical

Post-buckling modeling for strips under tension and residual stresses using asymptotic numerical method

Sami Abdelkhalek et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

Add to Collection

Article Mechanics

Multi-scale method for modeling thin sheet buckling under residual stresses in the context of strip rolling

Rebecca Nakhoul et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Mechanics

Inverse Cauchy method with conformal mapping: Application to latent flatness defect detection during rolling process

Daniel Weisz-Patrault

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Automation & Control Systems

Investigations on relations between shape defects and thickness profile variations in thin flat rolling

Babak Moazeni et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Proceedings Paper Engineering, Multidisciplinary

Model of residual stresses in hot-rolled sheets with taking into account relaxation process and phase transformation

Andrzej Milenin et al.

11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 (2014)

Add to Collection

Article Engineering, Multidisciplinary

FEM analysis for residual stress prediction in hot rolled steel strip during the run-out table cooling

Xiaodong Wang et al.

APPLIED MATHEMATICAL MODELLING (2013)

Add to Collection

Article Thermodynamics

An approximate method for computing the temperature distribution over material thickness during hot flat rolling

C. H. Moon et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)

Add to Collection

Article Engineering, Mechanical

Coupled approach for flatness prediction in cold rolling of thin strip

S. Abdelkhalek et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2011)

Add to Collection

Article Thermodynamics

An analytical model for the prediction of strip temperatures in hot strip rolling

Jaeboo Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)

Add to Collection

Article Engineering, Industrial

Calculation of thermal stress affecting strip flatness change during run-out table cooling in hot steel strip rolling

Xiaodong Wang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

Add to Collection

Article Metallurgy & Metallurgical Engineering

A study on the buckling behaviour of strips and plates with residual stresses

FD Fischer et al.

STEEL RESEARCH INTERNATIONAL (2005)

Add to Collection

Article Engineering, Industrial

Finite element simulation of cold rolling of thin strip

ZY Jiang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Add to Collection

Article Mechanics

Residual stress-induced center wave buckling of rolled strip metal

FD Fischer et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2003)

Add to Collection

Article Mechanics

Buckling of free infinite strips under residual stresses and global tension

FG Rammerstorfer et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.