4.8 Article

A data-driven rolling optimization control approach for building energy systems that integrate virtual energy storage systems

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Benchmarking high performance HVAC Rule-Based controls with advanced intelligent Controllers: A case study in a Multi-Zone system in Modelica

Xing Lu et al.

Summary: The design and retrofit of HVAC control systems are crucially important for energy efficiency. ASHRAE Guideline 36 (GDL36) was developed to provide standardized and high-performance rule-based HVAC control sequences. However, limited studies have verified the performance of these control sequences, and most focus on single-zone systems.

ENERGY AND BUILDINGS (2023)

Article Construction & Building Technology

Adaptive thermal sensation evaluation model in tents for Western Sichuan Plateau of China: A field study

Yu Han et al.

Summary: A field study was conducted in two typical areas of the Western Sichuan Plateau to investigate the thermal sensation of local herdsmen. A statistical regression analysis showed a difference between the actual and predicted thermal neutral temperatures. An adaptive predicted mean vote model was established to accurately predict the thermal sensation levels.

ENERGY AND BUILDINGS (2023)

Article Green & Sustainable Science & Technology

Day-ahead optimal scheduling of building energy microgrids based on time-varying virtual energy storage

Yunfei Mu et al.

Summary: This paper proposes a time-varying building VES model (TVES) to quantify the scheduling flexibility of a building envelope and develops a constrained optimal scheduling strategy to reduce electricity costs and ensure thermal comfort for users.

IET RENEWABLE POWER GENERATION (2023)

Article Energy & Fuels

Photovoltaic power prediction for solar micro-grid optimal control

Sonja Kallio et al.

Summary: In a solar micro-grid, a hybrid renewable energy system is used to generate electricity for onsite use. Accurate prediction of photovoltaic (PV) panel output is important for optimal energy flow control and is challenging due to the fluctuating nature of solar radiation availability. This study compares the accuracy of prediction models using multiple linear regression (MLR) and artificial neural network (ANN) methods, with the ANN model using individual PV output data showing the highest accuracy. The use of micro-inverter technology improves the accuracy of PV prediction for control purposes.

ENERGY REPORTS (2023)

Article Energy & Fuels

Optimal scheduling method of regenerative electric heating for emergency residential building heating: An affine arithmetic-based model predictive control approach

Jiarui Zhang et al.

Summary: An affine arithmetic-based model predictive control approach is proposed to balance the heating supply reliability and operation economy during power outages. Numerical studies show that the method can maintain minimum thermal demand and reduce operation cost under uncertainties.

IET ENERGY SYSTEMS INTEGRATION (2023)

Article Construction & Building Technology

Model predictive control under weather forecast uncertainty for HVAC systems in university buildings

Juan Hou et al.

Summary: This study aimed to improve the performance of model predictive control (MPC) under weather forecast uncertainty by introducing an error model. The results showed that the MPC with the error model achieved significant energy cost savings and improved thermal comfort, especially under low error conditions.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

Application of solar PV in commercial buildings: Utilizability of rooftops

Belal Ghaleb et al.

Summary: This study investigates the utilisability of commercial buildings' roofs for solar PV, identifying and categorizing different types of restrictive features. The results are validated and assessed through site visits and remote sensing techniques.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

Impacts of data preprocessing and selection on energy consumption prediction model of HVAC systems based on deep learning

Ziwei Xiao et al.

Summary: This paper studies the impact of data processing methods and feature selection on HVAC energy consumption prediction using data-driven models. By developing long and short-term memory models based on historical data, the effects of two data smoothing methods, feature selection, training set volumes, and model update frequency are analyzed and compared to improve prediction accuracy.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

Energy flexibility assessment of a zero-energy office building with building thermal mass in short-term demand-side management

Fei Lu et al.

Summary: This study developed a method to evaluate the energy flexibility of zero-energy buildings (ZEBs) and applied it to an office building in Beijing, China. The results showed that the building has considerable flexibility in responding to energy supply, but boundary conditions and event start times can affect its performance.

JOURNAL OF BUILDING ENGINEERING (2022)

Article Engineering, Aerospace

Modeling and forecasting of ionosphere TEC using least squares SVM in central Europe

Seyyed Reza Ghaffari-Razin et al.

Summary: A new method for spatio-temporal modeling of ionosphere total electron content (TEC) using least squares support vector machine (LS-SVM) is proposed. The method reduces computational complexity, improves convergence speed and accuracy, and shows better performance in seasonal error analysis.

ADVANCES IN SPACE RESEARCH (2022)

Article Construction & Building Technology

Predicting non-uniform indoor air quality distribution by using pulsating air supply and SVM model

Xue Tian et al.

Summary: This study innovatively predicts the non-uniform indoor air quality distribution with mixing ventilation, directly from air temperature and air velocity. The support vector machine model outperforms other models in accuracy and computation time, and can obtain effective inputs by monitoring air velocity and temperature for 10-20 min.

BUILDING AND ENVIRONMENT (2022)

Article Engineering, Electrical & Electronic

Prediction of virtual energy storage capacity of the air-conditioner using a stochastic gradient descent based artificial neural network

Kaliyamoorthy Vijayalakshmi et al.

Summary: This study focuses on the integration of air conditioners as a virtual energy storage system in smart grids to mitigate the fluctuation of renewable energy sources. It proposes a temperature control strategy and an artificial neural network model to achieve optimal energy prediction and energy savings.

ELECTRIC POWER SYSTEMS RESEARCH (2022)

Article Energy & Fuels

A two-stage scheduling method for integrated community energy system based on a hybrid mechanism and data-driven model

Yunfei Mu et al.

Summary: This paper proposes a two-stage scheduling method for the integrated community energy system (ICES) based on a hybrid mechanism and data-driven model. The method combines the mechanism energy hub model with a data-driven efficiency correction model to accurately extract nonlinear characteristics of equipment efficiency. Case studies demonstrate that the proposed method can improve the solution speed and accuracy of the scheduling model, and enhance the operating economy of the ICES.

APPLIED ENERGY (2022)

Article Construction & Building Technology

Investigating the performance of machine learning models combined with different feature selection methods to estimate the energy consumption of buildings

Xue Liu et al.

Summary: This study investigates the performance and interpretability of machine learning-based energy usage models through the comparison of feature selection methods and analysis of model interpretability. The results suggest that the wrapper method is effective in improving model accuracy.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

Evaluation of the accuracy of PMV and its several revised models using the Chinese thermal comfort Database

Heng Du et al.

Summary: This study assessed the performance of PMV and its revised models using the Chinese Thermal Comfort Database, finding better accuracy in air-conditioned buildings but limited improvements in different subset cases.

ENERGY AND BUILDINGS (2022)

Review Construction & Building Technology

Dynamic insulation systems of building envelopes: A review

Mohammad Fawaier et al.

Summary: Dynamic insulation is a method that allows the heat transmission rate through building envelopes to vary over time. This paper collects and assesses literature on different dynamic insulation structures and compares mathematical models, experimental studies, and numerical simulations. The results show that dynamic insulation can achieve low heat loss and significant energy savings.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

Heat flexibility evaluation and multi-objective optimized control of a low-energy building with district heating

Xiaochen Yang et al.

Summary: This study analyzes the impact of integrated energy flexibility on the heating system operation of a low-energy building connected to district heating. The results show that the integrated energy flexibility helps to make better use of low-price heat and improve flexibility by utilizing the thermal mass and storage tank, resulting in cost savings.

ENERGY AND BUILDINGS (2022)

Article Construction & Building Technology

Development of novel PMV-based HVAC control strategies using a mean radiant temperature prediction model by machine learning in Kuwaiti climate

Jaesung Park et al.

Summary: Kuwait, known for its extreme heat, has high energy consumption due to air conditioning use. A study developed a Thermal Comfort-based Controller to save energy, with machine learning models accurately estimating MRT and reducing energy consumption by over 10% in Kuwait's climate.

BUILDING AND ENVIRONMENT (2021)

Article Engineering, Electrical & Electronic

Home energy management system for smart buildings with inverter-based air conditioning system

Ali Esmaeel Nezhad et al.

Summary: This paper introduces a new model for self-scheduling problem using HEMS, aiming to minimize daily electricity bills through mixed-integer linear programming for optimizing home appliances. By integrating PV and EES systems to handle uncertain solar power generation, it effectively reduces energy consumption of AC and other appliances during peak hours, resulting in lower bills.

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2021)

Article Energy & Fuels

Short-term wind power prediction based on multidimensional data cleaning and feature reconfiguration

Shuai Wang et al.

Summary: The study introduces a short-term wind power prediction method based on data cleaning and feature reconfiguration, which improves prediction accuracy by analyzing the multidimensional distribution of wind data, detecting outliers, and reconfiguring wind features. The use of convolutional neural network for prediction shows good performance, enhancing the accuracy of short-term wind power prediction.

APPLIED ENERGY (2021)

Article Energy & Fuels

Optimal planning of a rooftop PV system using GIS-based reinforcement learning

Seunghoon Jung et al.

Summary: The study developed a GIS-based RL model for optimal planning of rooftop PV systems, showing its economic profitability in residential buildings in Nonhyeon district, South Korea. The model outperformed existing methods, demonstrating its potential for optimizing economic feasibility and promoting the adoption of rooftop PV systems.

APPLIED ENERGY (2021)

Article Construction & Building Technology

Implementation of model predictive control in a large-sized, low-energy office building

Svenne Freund et al.

Summary: Modern and energy-optimized buildings often lack an intelligent and advanced control strategy. Instead, conventional rule-based control strategies are still mainly used today, which do not exploit the full performance potential of these buildings. Model predictive control has shown promise in reducing energy consumption and improving occupants' comfort, especially in large-scale, fully occupied buildings.

BUILDING AND ENVIRONMENT (2021)

Review Construction & Building Technology

State of the art review on model predictive control (MPC) in Heating Ventilation and Air-conditioning (HVAC) field

Ye Yao et al.

Summary: Building systems are complex and unpredictable, posing challenges for energy-saving control. Model predictive control (MPC) is a potential strategy to address these challenges. This paper provides a comprehensive view of MPC applications in building HVAC systems, discussing modeling techniques and optimization algorithms in detail.

BUILDING AND ENVIRONMENT (2021)

Article Thermodynamics

Design of a combined system based on two-stage data preprocessing and multi-objective optimization for wind speed prediction

Ying Wang et al.

Summary: A novel combined forecasting system is proposed in this study for wind speed prediction, which utilizes two-stage data preprocessing, three component forecasting models, and a multi-objective optimization algorithm. Experimental results show superior accuracy and robustness compared to contrastive models, indicating significant potential for application in wind power production.

ENERGY (2021)

Review Energy & Fuels

Energy flexibility of residential buildings: A systematic review of characterization and quantification methods and applications

Han Li et al.

Summary: This paper reviews recent studies on residential building demand side management, focusing on the characterization and quantification of energy flexibility in various types of flexible loads. The studies show that shifting loads is the dominant flexibility type, with control strategies and mathematical formulations playing a key role in achieving flexibility. The review reveals research opportunities to address significant gaps in the existing literature and emphasizes the importance of standardizing definitions, representation of flexibility resources, integrating occupant impacts, and developing requirements and credits of energy flexibility in building energy codes and standards.

ADVANCES IN APPLIED ENERGY (2021)

Article Construction & Building Technology

Economic model predictive control of space heating and dynamic solar shading

M. D. Knudsen et al.

ENERGY AND BUILDINGS (2020)

Article Engineering, Electrical & Electronic

A chance-constrained stochastic model predictive control for building integrated with renewable resources

Xiaodi Wang et al.

ELECTRIC POWER SYSTEMS RESEARCH (2020)

Article Construction & Building Technology

Solar power forecast for a residential smart microgrid based on numerical weather predictions using artificial intelligence methods

Reza Sabzehgar et al.

JOURNAL OF BUILDING ENGINEERING (2020)

Article Green & Sustainable Science & Technology

Dispatch Model for CHP With Pipeline and Building Thermal Energy Storage Considering Heat Transfer Process

Yuanhang Dai et al.

IEEE TRANSACTIONS ON SUSTAINABLE ENERGY (2019)

Article Engineering, Electrical & Electronic

Optimal Dispatch for a Combined Cooling, Heating and Power Microgrid Considering Building Virtual Energy Storage

Lijun Yang et al.

JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY (2019)

Article Engineering, Electrical & Electronic

Optimal Real-Time Residential Thermal Energy Management for Peak-Load Shifting With Experimental Verification

Ali Baniasadi et al.

IEEE TRANSACTIONS ON SMART GRID (2019)

Article Construction & Building Technology

Potential of energy flexible buildings: Evaluation of DSM strategies using building thermal mass

Jose Sanchez Ramos et al.

ENERGY AND BUILDINGS (2019)

Article Construction & Building Technology

Empirical validation of different internal superficial heat transfer models on a full-scale passive house

Fabio Munaretto et al.

JOURNAL OF BUILDING PERFORMANCE SIMULATION (2018)

Article Engineering, Electrical & Electronic

Thermal Battery Modeling of Inverter Air Conditioning for Demand Response

Meng Song et al.

IEEE TRANSACTIONS ON SMART GRID (2018)

Article Construction & Building Technology

Uncertainty analysis of occupant behavior and building envelope materials in office building performance simulation

Walid Belazi et al.

JOURNAL OF BUILDING ENGINEERING (2018)

Article Construction & Building Technology

A framework for quantifying the impact of occupant behavior on energy savings of energy conservation measures

Kaiyu Sun et al.

ENERGY AND BUILDINGS (2017)

Article Construction & Building Technology

PMV-based event-triggered mechanism for building energy management under uncertainties

Zhanbo Xu et al.

ENERGY AND BUILDINGS (2017)

Article Construction & Building Technology

The effects of programmed air temperature changes on sleep quality and energy saving in bedroom

L. Lan et al.

ENERGY AND BUILDINGS (2016)

Article Engineering, Electrical & Electronic

Experimental Study of Grid Frequency Regulation Ancillary Service of a Variable Speed Heat Pump

Young-Jin Kim et al.

IEEE TRANSACTIONS ON POWER SYSTEMS (2016)

Article Green & Sustainable Science & Technology

A cooperative net zero energy community to improve load matching

Rui Amaral Lopes et al.

RENEWABLE ENERGY (2016)

Review Green & Sustainable Science & Technology

Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system

Lidia Navarro et al.

RENEWABLE ENERGY (2016)

Article Construction & Building Technology

Innovative alternative solar thermal solutions for housing in conservation-area sites listed as national heritage assets

C. Cristofari et al.

ENERGY AND BUILDINGS (2015)

Article Engineering, Electrical & Electronic

Modeling and Analysis of a Variable Speed Heat Pump for Frequency Regulation Through Direct Load Control

Young-Jin Kim et al.

IEEE TRANSACTIONS ON POWER SYSTEMS (2015)

Article Construction & Building Technology

Investigating the performance of a combined solar system with heat pump for houses

Muhammad Waseem Ahmad et al.

ENERGY AND BUILDINGS (2013)

Article Engineering, Electrical & Electronic

MPC-Based Appliance Scheduling for Residential Building Energy Management Controller

Chen Chen et al.

IEEE TRANSACTIONS ON SMART GRID (2013)

Article Construction & Building Technology

Predicting the performance of an office under climate change: A study of metrics, sensitivity and zonal resolution

Pieter de Wilde et al.

ENERGY AND BUILDINGS (2010)

Article Construction & Building Technology

A theoretical adaptive model of thermal comfort - Adaptive Predicted Mean Vote (aPMV)

Runming Yao et al.

BUILDING AND ENVIRONMENT (2009)