Related references
Note: Only part of the references are listed.Sustainable hydrogen society-Vision, findings and development of a hydrogen economy using the example of Austria
Alexander Trattner et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)
Techno-economic analysis and Monte Carlo simulation of green hydrogen production technology through various water electrolysis technologies
Dohyung Jang et al.
ENERGY CONVERSION AND MANAGEMENT (2022)
Assessing potential profiles in water electrolysers to minimise titanium use
Hans Becker et al.
ENERGY & ENVIRONMENTAL SCIENCE (2022)
Trace-metal contamination in proton exchange membrane fuel cells caused by laser-cutting stains on carbon-coated metallic bipolar plates
Timon Novalin et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Synthesis and Ex-Situ characterizations of diamond-like carbon coatings for metallic bipolar plates in PEM fuel cells
Ibrahim Alaefour et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Review on mechanisms and recovery procedures for reversible performance losses in polymer electrolyte membrane fuel cells
Jens Mitzel et al.
JOURNAL OF POWER SOURCES (2021)
Recent development in electrocatalysts for hydrogen production through water electrolysis
Shams Anwar et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell
Yuxi Song et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Transient stainless-steel dissolution and its consequences on ex-situ bipolar plate testing procedures
Xuejie Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Challenges towards hydrogen economy in China
Xusheng Ren et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Investigation of formability of metallic bipolar plates via stamping for light-weight PEM fuel cells
Kivanc Karacan et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Local measurement of current collector potential in a polymer electrolyte membrane water electrolyser
Hans Becker et al.
JOURNAL OF POWER SOURCES (2020)
Stainless steel bipolar plates for proton exchange membrane fuel cells: Materials, flow channel design and forming processes
Yu Leng et al.
JOURNAL OF POWER SOURCES (2020)
Retrospective and prospective of the hydrogen supply chain: A longitudinal techno-historical analysis
Kaveh R. Khalilpour et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
A comprehensive comparison of state-of-the-art manufacturing methods for fuel cell bipolar plates including anticipated future industry trends
S. Porstmann et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Influence of microporous layer on corrosion of metallic bipolar plates in fuel cells
L. Castanheira et al.
JOURNAL OF POWER SOURCES (2019)
Hydrogen Fuel Cell Vehicles; Current Status and Future Prospect
Yogesh Manoharan et al.
APPLIED SCIENCES-BASEL (2019)
A comprehensive study of the effect of bipolar plate (BP) geometry design on the performance of proton exchange membrane (PEM) fuel cells
Tabbi Wilberforce et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Grid-connected hydrogen production via large-scale water electrolysis
T. Nguyen et al.
ENERGY CONVERSION AND MANAGEMENT (2019)
Experimental study on performance evaluation of PEM fuel cell by coating bipolar plate with materials having different contact angle
Elif Eker Kahveci et al.
FUEL (2019)
Technical evaluation of proton exchange membrane (PEM) fuel cell performance - A review of the effects of bipolar plates coating
Tabbi Wilberforce et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)
Water Transport and Removal in PEMFC Gas Flow Channel with Various Water Droplet Locations and Channel Surface Wettability
Yanzhou Qin et al.
ENERGIES (2018)
Meeting Cost and Manufacturing Expectations for Automotive Fuel Cell Bipolar Plates
J. M. Huya-Kouadio et al.
FUEL CELL SEMINAR & ENERGY EXPOSITION 2017 (2018)
Durable graphene-coated bipolar plates for polymer electrolyte fuel cells
Yoon Ho Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Performance of a PEM Fuel Cell Using Electroplated Ni-Mo and Ni-Mo-P Stainless Steel Bipolar Plates
Hamed Rashtchi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Enhancing the corrosion resistance of the 2205 duplex stainless steel bipolar plates in PEMFCs environment by surface enriched molybdenum
Lv Jinlong et al.
RESULTS IN PHYSICS (2017)
Current understanding of chemical degradation mechanisms of perfluorosulfonic acid membranes and their mitigation strategies: a review
M. Zaton et al.
SUSTAINABLE ENERGY & FUELS (2017)
A review on water fault diagnosis of PEMFC associated with the pressure drop
Pucheng Pei et al.
APPLIED ENERGY (2016)
Evaluation of Ni-Mo and Ni-Mo-P Electroplated Coatings on Stainless Steel for PEM Fuel Cells Bipolar Plates
H. Rashtchi et al.
FUEL CELLS (2016)
Analysis of the strategies for bridging the gap towards the Hydrogen Economy
R. Moliner et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Protective coatings on stainless steel bipolar plates for proton exchange membrane (PEM) electrolysers
A. S. Gago et al.
JOURNAL OF POWER SOURCES (2016)
Mitigation of Chemical Membrane Degradation in Fuel Cells: Understanding the Effect of Cell Voltage and Iron Ion Redox Cycle
Ka Hung Wong et al.
CHEMSUSCHEM (2015)
Towards more representative test methods for corrosion resistance of PEMFC metallic bipolar plates
G. Hinds et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Degradation of SS316L bipolar plates in simulated fuel cell environment: Corrosion rate, barrier film formation kinetics and contact resistance
Dionissios D. Papadias et al.
JOURNAL OF POWER SOURCES (2015)
Development of Compact and High-Performance Fuel Cell Stack
Norishige Konno et al.
SAE INTERNATIONAL JOURNAL OF ALTERNATIVE POWERTRAINS (2015)
Effect of surface treatment on the interfacial contact resistance and corrosion resistance of Fe-Ni-Cr alloy as a bipolar plate for polymer electrolyte membrane fuel cells
Meijun Yang et al.
ENERGY (2014)
An electrochemical treatment to improve corrosion and contact resistance of stainless steel bipolar plates used in polymer electrolyte fuel cells
Ebrahim M. Gabreab et al.
JOURNAL OF POWER SOURCES (2014)
In situ mapping of potential transients during start-up and shut-down of a polymer electrolyte membrane fuel cell
E. Brightman et al.
JOURNAL OF POWER SOURCES (2014)
被撤回的出版物: A review of composite and metallic bipolar plates in proton exchange membrane fuel cell: Materials, fabrication, and material selection (Retracted article. See vol. 483, 2021)
Reza Taherian
JOURNAL OF POWER SOURCES (2014)
Operating conditions affecting the contact resistance of bi-polar plates in proton exchange membrane fuel cells
Alejandro Oyarce et al.
JOURNAL OF POWER SOURCES (2013)
Hydrogen PEMFC system for automotive applications
Billy Wu et al.
INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES (2012)
A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research
Yun Wang et al.
APPLIED ENERGY (2011)
Evaluation of silver-coated stainless steel bipolar plates for fuel cell applications
Ing-Bang Huang
JOURNAL OF POWER SOURCES (2011)
In situ metal ion contamination and the effects on proton exchange membrane fuel cell performance
Mark Sulek et al.
JOURNAL OF POWER SOURCES (2011)
Corrosion properties and contact resistance of TiN, TiAlN and CrN coatings in simulated proton exchange membrane fuel cell environments
L. Wang et al.
JOURNAL OF POWER SOURCES (2010)
Electrical contact resistance between stainless steel bipolar plate and carbon felt in PEFC: A comprehensive study
Johan Andre et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
The electrical and corrosion properties of carbon nanotube coated 304 stainless steel/polymer composite as PEM fuel cell bipolar plates
Yang-Bok Lee et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)
Activity benchmarks and requirements for Pt, Pt-alloy, and non-Pt oxygen reduction catalysts for PEMFCs
HA Gasteiger et al.
APPLIED CATALYSIS B-ENVIRONMENTAL (2005)
Review of bipolar plates in PEM fuel cells: Flow-field designs
XG Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2005)
A comparison of release rates of Cr, Ni, and Fe from stainless steel alloys and the pure metals exposed to simulated rain events
G Herting et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2005)
Nafion degradation in PEFCs from end plate iron contamination
A Pozio et al.
ELECTROCHIMICA ACTA (2003)
Passivation of Fe-Cr alloys studied with ICP-AES and EQCM
D Hamm et al.
CORROSION SCIENCE (2002)
Share Paper
