☆ 4.8 Article

Oxygen vacancies-modified S-scheme heterojunction of Bi-doped La2Ti2O7 and La-doped Bi4Ti3O12 to improve the NO gas removal avoiding NO2 product

APPLIED CATALYSIS B-ENVIRONMENT AND ENERGY (2024)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

Synergistic effect of cyano defects and CaCO3 in graphitic carbon nitride nanosheets for efficient visible-light-driven photocatalytic NO removal

Kaining Li et al.

Summary: This paper reports a novel porous g-C3N4 nanosheet photocatalyst modified with cyano defects and CaCO3 for efficient NOx removal. The modified photocatalyst exhibits enhanced visible-light response, improved electron excitation and transfer, leading to significantly higher NO removal rate compared to pristine g-C3N4 nanosheets. The introduction of cyano defects and CaCO3 enables control over NO adsorption and activation processes, reducing the emission of toxic intermediate NO2.

JOURNAL OF HAZARDOUS MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Photocatalytic NO removal over defective Bi/BiOBr nanoflowers: The inhibition of toxic NO2 intermediate via high humidity

Yue Xin et al.

Summary: Water vapor has been found to have a negligible effect on the efficiency of photocatalytic NO removal, but it reduces the generation of toxic NO2 intermediate. Defective Bi/BiOBr nanoflowers were synthesized and showed significantly improved photocatalytic NO removal efficiency. The study also revealed the adsorption and removal pathway of NO using NO-TPD and in-situ DRIFTS techniques.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of oxygen vacancies on photoelectrochemical properties of amphoteric semiconductor Bi4Ti3O12 photoelectrode

Yongfei Cui et al.

Summary: Bi4Ti3O12 (BTO) photoelectrodes were prepared using a sol-gel spin coating method, and the oxygen vacancy (OV) concentrations in BTO were regulated through heat-treatment in different atmospheres. The introduction of OVs in BTO after Ar processing resulted in an interesting p/n type amphoteric photo-response characteristic. The enhanced photoelectrochemical properties of Ar-BTO were attributed to the abundant OVs, which effectively inhibited recombination, boosted carrier injection efficiency, and activated the electrode surface.

VACUUM (2023)

Add to Collection

Article Chemistry, Physical

Phosphorus and kalium co-doped g-C3N4 with multiple-locus synergies to degrade atrazine: Insights into the depth analysis of the generation and role of singlet oxygen

Yaocheng Deng et al.

Summary: In this study, phosphorus and kalium co-doped g-C3N4 with cyano and nitrogen vacancies (PKCN) was prepared via a simple thermal treatment. The prepared PKCN exhibited excellent singlet oxygen generation ability and efficiently degraded atrazine under visible light. Density functional theory calculations revealed the synergistic effect of different active units in efficient singlet oxygen generation. Additionally, the photocatalytic process significantly reduced the toxicity of atrazine.

APPLIED CATALYSIS B-ENVIRONMENTAL (2023)

Add to Collection

Article Chemistry, Physical

Broad spectrum driven Y doped BiO 2-x for enhanced degradation of tetracycline: Synergy between singlet oxygen and free radicals

Yi Zhou et al.

Summary: This study demonstrates the importance of the synergy between singlet oxygen and free radicals in driving the degradation of organic pollutants in water. The YBiO2_ x photocatalyst, prepared through a hydrothermal method with yttrium doping, is found to produce oxygen vacancies and possess up-conversion property. Superoxide radicals, singlet oxygen, hydroxyl radicals, and holes play crucial roles in the photocatalytic reaction process. The study also reveals that the degradation efficiency of tetracycline can be maintained in the presence of various anions and humic acid in wastewater, thanks to the synergy between singlet oxygen and free radicals.

APPLIED SURFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Preparation of core-shell heterojunction photocatalysts by coating CdS nanoparticles onto Bi4Ti3O12 hierarchical microspheres and their photocatalytic removal of organic pollutants and Cr(VI) ions

Tingting Cheng et al.

Summary: Researchers successfully constructed core-shell BTO/CdS heterojunction photocatalysts, which exhibit excellent photocatalytic activity in degrading dyes and harmful ions. The enhanced photocatalytic mechanism of BTO/CdS heterojunction photocatalysts was discussed based on a Z-scheme carrier transfer process.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Enhanced photocatalytic NO removal with the superior selectivity for NO2- /NO3- species of Bi12GeO20-based composites via a ball-milling treatment: Synergetic effect of surface oxygen vacancies and n-p heterojunctions

Fei Chang et al.

Summary: Bi12GeO20-based composites Bi12GeO20-Bi2S3 (BGS) were constructed through ball-milling method using sulfur powder for the first time. These composites showed enhanced photocatalytic removal of NO at ppb level under visible light with high selectivity for NO2-/NO3- species, avoiding the generation of toxic NO2. The in-situ generation of n-p heterojunctions with surface OVs and the enhanced visible-light absorption were crucial factors in the improved performance of the BGS composites.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Materials Science, Ceramics

Effects of cerium on structures and electrical properties of (Nb, Ta) modified Bi4Ti3O12 piezoelectric ceramics

Feifei Zhang et al.

Summary: This study synthesized Bi4Ti3O12 high-temperature piezoelectric ceramics composed of 0.03 mol (Nb, Ta)(5+) substituting B site and x mol CeO2 (x = 0-0.05) substituting A site using the conventional solid-state reaction method. The effects of Ce additive on the structures and electrical properties of these ceramics were investigated systematically.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Article Chemistry, Physical

Surface defects engineered Bi4Ti3O12 nanosheets for photocatalytic degradation of antibiotic levofloxacin

Shunhang Wei et al.

Summary: Surface defects have a significant effect on the photocatalytic properties of Bi4Ti3O12, increasing its activity by providing hole trapping sites. These defects result from partial exfoliation of the external (Bi2O2)2+ layers, altering the band structure and facilitating faster hole participation in the photocatalytic oxidation process.

APPLIED CATALYSIS A-GENERAL (2022)

Add to Collection

Article Chemistry, Physical

Effects of Bi-dopant and co-catalysts upon hole surface trapping on La2Ti2O7 nanosheet photocatalysts in overall solar water splitting

Xiaoyan Cai et al.

Summary: Pristine and Bi-doped lanthanum titanium oxide nanosheets were synthesized as photocatalysts for overall solar water splitting, eliminating surface hole traps and enhancing photocatalytic activity. However, increasing the Bi-dopant level beyond 5 at.% resulted in the formation of localized states above the valence band, reducing the lifetime of photogenerated charge carriers and jeopardizing photocatalytic activity. By addressing surface trapping and surface catalysis issues, an effective strategy was proposed for nanostructured metal oxide photocatalysts.

NANO RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Surface doping of Bi4Ti3O12 with S: Enhanced photocatalytic activity, mechanism and potential photodegradation application

Tingting Cheng et al.

Summary: In this study, S element was doped into the surface of BTO crystals to enhance their photocatalytic activities in decomposing organic pollutants. The S-doped-BTO samples demonstrated improved visible-light adsorption and separation efficiency of photogenerated electron-hole pairs. Among the different x%S-BTO samples, 3.3%S-BTO showed the highest photocatalytic activity, with a performance 10.1 times higher than that of pristine BTO. The study also investigated the effects of inorganic anions and pH values on the photocatalytic performance of the optimal 3.3%S-BTO, as well as its photodegradation of other organic pollutants. The enhanced photocatalytic mechanism for the S-doped-BTO photocatalysts was proposed and discussed.

MATERIALS RESEARCH BULLETIN (2022)

Add to Collection

Article Energy & Fuels

Constructing Oxygen Vacancies on Bi2MoO6 Nanosheets by Aqueous Ammonia Etching with Enhanced Photocatalytic NO Oxidation Performance

Xinling Wen et al.

Summary: In this study, oxygen vacancies (OVs) were successfully introduced into Bi2MoO6 nanosheets through treatment with aqueous ammonia under mild conditions. The resulting OVs-rich BMO-OH catalyst exhibited enhanced photocatalytic activity with a NO removal ratio 2.2 times higher than that of the pristine BMO material. These findings provide new insights into OVs construction and photocatalytic technology.

ENERGY & FUELS (2022)

Add to Collection

Article Engineering, Environmental

A novel hierarchical heterostructure of hollow La2Ti2O7/In2O3 with strong interface interaction for photocatalytic antibiotic degradation

Yilin Dong et al.

Summary: This study successfully modulates the interface structure and improves light absorption and active sites through the design of a sandwich-like La2Ti2O7/In2O3 hierarchical tubular heterostructure, achieving efficient photocatalytic degradation.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Energy & Fuels

Palladium Nanoparticles Embedded Nutshell-like Bi2WO6 as an Efficient and Stable Visible-Light-Responsive Photocatalysts for NO Removal

Wei Zhang et al.

Summary: In this study, a nutshell-like bismuth tungstate was synthesized and Pd nanoparticles were deposited on its surface. It was found that the addition of Pd improved the photocatalytic activity of the bismuth tungstate, enhancing the separation of electrons and holes and facilitating the conversion of NO to environmentally friendly NO3-.

ENERGY & FUELS (2022)

Add to Collection

Article Environmental Sciences

The excellent photocatalytic NO removal performance relates to the synergistic effect between the prepositive NaOH solution and the g-C3N4 photocatalysis

Kai Qi et al.

Summary: It was found that the prepositive NaOH solution can significantly improve the photocatalytic NO removal activity of g-C3N4, by increasing humidity and pH value, enhancing adsorption ability, reducing difficulty, and forming synergistic effect.

ENVIRONMENTAL RESEARCH (2022)

Add to Collection

Article Engineering, Chemical

Oxygen vacancy-rich Bi2MoO6 anchored on cuboid metal-organic frameworks for photocatalytic elimination of Cr(VI)/2-nitrophenol mixed pollutants

Jianhao Qiu et al.

Summary: Oxygen vacancy-rich Bi2MoO6 nanoflakes were anchored on cuboid MIL-121, resulting in enhanced separation and transportation rates of photo-induced charge carriers. The Bi2MoO6/MIL-121 with rich oxygen vacancies exhibited excellent photocatalytic activities for Cr(VI) reduction and 2-nitrophenol degradation. The timely consumption of photo-induced electrons and holes further boosted the photocatalytic efficiencies in their coexistent environment.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

β particles induced directional inward migration of oxygen vacancies: Surface oxygen vacancies and interface oxygen vacancies synergistically activate PMS

Xinyu Hu et al.

Summary: In this study, a high-energy beta electron beam was used to generate and migrate surface oxygen defects, leading to an increase in photoactivation efficiency and degradation of ciprofloxacin.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Engineering, Environmental

La2Ti2O7 nanosheets synthesized under magnetic field for ofloxacin ferrophotocatalytic degradation

Li Lv et al.

Summary: Ferrophotocatalytic degradation is a promising strategy for environmental remediation. La2Ti2O7 nanosheets synthesized by a hydrothermal method under a magnetic field exhibit enhanced photocatalytic ability and degradation efficiency. The manipulation of ferroelectric properties and built-in electric field plays a crucial role in the photocatalytic performance.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrothermal formation of bismuth-titanate nanoplatelets and nanowires: the role of metastable polymorphs

Darko Makovec et al.

Summary: In this investigation, the formation processes of two different morphologies (nanoplatelets and nanowires) of bismuth-titanate nanoparticles were revealed during hydrothermal treatment. The study showed that the concentration of NaOH influenced the morphology of the nanoparticles.

CRYSTENGCOMM (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Coral-Shaped TiO2-δ Decorated with Carbon Quantum Dots and Carbon Nanotubes for NO Removal

Yucheng Ou et al.

Summary: By introducing oxygen vacancies to TiO2-delta and decorating with CNTs and N-CQDs, the generation of active species promoted deep oxidation and selective conversion of NO into nitrate. The adsorption and reaction sites for H2O and O-2 separately in space over the surface of TiO2-delta CNTs/N-CQDs were revealed through density functional theory calculations, demonstrating high efficiency and selectivity for NO removal.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Role of surface oxygen vacancies in zinc oxide/graphitic carbon nitride composite for adjusting energy band structure to promote visible-light-driven photocatalytic activity

Xuefan Feng et al.

Summary: The introduction of surface oxygen vacancies in ZnO/g-C3N4 composites was found to be effective in narrowing the bandgap and enhancing photocatalytic activity. Composites with higher surface oxygen vacancies showed increased transient photocurrent and improved degradation of organic compounds under visible light, indicating the significance of surface defects in promoting photocatalytic performance.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Improved photocatalytic activity of BaTiO3/La2Ti2O7 heterojunction composites via piezoelectric-enhanced charge transfer

Yaoyu Li et al.

Summary: A novel piezo-photocatalyst was synthesized in this study, which effectively improved the photocatalytic performance by modulating the polarization field of piezoelectric materials. The BaTiO3/La2Ti2O7 heterojunctions exhibited a stronger piezoelectric potential difference compared to pure BaTiO3, leading to enhanced charge separation and migration for efficient pollutant degradation under visible light.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Physical

Oxygen vacancy mediated single unit cell Bi2WO6 by Ti doping for ameliorated photocatalytic performance

Muhammad Arif et al.

Summary: Crystal defects play a crucial role in semiconductor photocatalysis, and engineering defects with dopants can lead to the production of highly efficient photocatalysts. Experimental results have shown that modifying the crystal structure can enhance photocatalytic efficiency.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Add to Collection

Article Engineering, Chemical

Enhanced photocatalytic conversion of NOx with satisfactory selectivity of 3D-2D Bi4O5Br2-GO hierarchical structures via a facile

Fei Chang et al.

Summary: A novel series of 3D-2D Bi4O5Br2-GO hierarchical composites were successfully fabricated via a facile microwave-assisted method, showing significant enhancement in photocatalytic capability for NOx removal. Particularly, the best catalog Bi4O5Br2-GO1.6 exhibited outstanding NOx conversion rate and selectivity, attributed to the structure and photocatalytic mechanism of the composites.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Ethanol-assisted molten salt synthesis of Bi4Ti3O12/Bi2Ti2O7 with enhanced visible light photocatalytic performance

Yujing Ou et al.

Summary: The study highlights the importance of enhancing precursor mixing effect in molten salt synthesis of photocatalysts, with ethanol playing a crucial role in the synthesis of Bi4Ti3O12/Bi2Ti2O7 composite photocatalysts. The prepared composite displayed higher photocatalytic activity compared to individual components and showed the smallest charge resistance. The increased photocatalytic activity was attributed to a large charge transfer interface and built-in electric field rather than light absorption or dark adsorption.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Band Gap Narrowing of Bi-Doped NaTaO3 for Photocatalytic Hydrogen Evolution under Simulated Sunlight: A Pseudocubic Phase Induced by Doping

Gustavo A. S. Alves et al.

Summary: The study demonstrates that Bi-doping NaTaO3 can effectively narrow the band gap and enhance the efficiency of photocatalytic water splitting for hydrogen production. The doped pseudocubic phase structure along with the reduced band gap meet the requirement for achieving efficient light absorption.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Surface acid etching for efficient anchoring of potassium on 3DOM La0.8Sr0.2MnO3 catalyst: An integration strategy for boosting soot and NOx simultaneous elimination

Peng Zhao et al.

Summary: This study developed an innovative non-noble metal catalyst, named HKLSM, which showed competitive soot combustion activity and NOx adsorption capability. The integration strategy employed in this catalyst rationalizes an alternative protocol for simultaneous elimination of soot and NOx, as well as potentially other catalysis systems.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Ternary g-C3N4/TiO2/Ti3C2 MXene S-scheme heterojunction photocatalysts for NOx removal under visible light

Xueshan Hu et al.

Summary: Highly efficient composite photocatalysts were prepared by annealing partially oxidized Ti3C2 MXene with melamine under N-2 flow. The ternary g-C3N4/TiO2/Ti3C2 MXene photocatalyst significantly enhanced electron-hole separation and achieved high NOx removal efficiency. This work demonstrates that moderately oxidized Ti3C2 MXene is a good candidate for high-performance air purification photocatalysts.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Review Chemistry, Physical

Mechanism of improving the SCR NO removal activity of Fe2O3 catalyst by doping Mn

Dongdong Ren et al.

Summary: The doping of Mn on the gamma-Fe2O3 catalyst surface can enhance the NO removal catalytic activity by improving surface acidity and activity, promoting the adsorption of NH3 and NO, and facilitating the de-NOx reaction pathway.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Maximizing the Formation of Reactive Oxygen Species for Deep Oxidation of NO via Manipulating the Oxygen-Vacancy Defect Position on (BiO)2CO3

Fei Rao et al.

Summary: Constructing oxygen vacancies (OVs) in metal oxide semiconductors is an effective strategy to enhance photocatalytic performance by promoting the utilization of solar light and boosting the formation of surface reactive oxygen species (ROS). The study demonstrates a straightforward approach for enhancing photo-oxidative nitric oxide (NO) removal efficiency by manipulating the OV defect position in semiconductors, specifically in (BiO)2CO3 (BOC).

ACS CATALYSIS (2021)

Add to Collection

Article Materials Science, Ceramics

Morphology-dependent photocatalytic performance of Bi4Ti3O12

Siying Niu et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Review Engineering, Environmental

Radical-induced oxidation removal of multi-air-pollutant: A critical review

Bo Yuan et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

SnS2/Bi4Ti3O12 Heterostructure Material: A UV-Visible Light Active Direct Z-Scheme Photocatalyst for Aqueous Phase Degradation of Diazinon

Krishnendu Das et al.

CHEMISTRYSELECT (2020)

Add to Collection

Article Materials Science, Multidisciplinary

One-step synthesis of dandelion-like lanthanum titanate nanostructures for enhanced photocatalytic performance

Zhong Huang et al.

NPG ASIA MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Synthesis of La2Ti2O7 flexible self-supporting film and its application in flexible energy storage device

Yi Cao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Ceramics

Effects of sintering temperature on structural, electrical and ferroelectric properties of La2Ti2O7 ceramics

Ravina Swami et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Chemistry, Physical

Photocatalytic and sonophotocatalytic degradation of rhodamine B by nano-sized La2Ti2O7 oxides synthesized with sol-gel method

Sebastien Leroy et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Promoting the photocatalytic activity of Bi4Ti3O12 microspheres by incorporating iron

Zhendong Liu et al.

RSC ADVANCES (2020)

Add to Collection

Article Chemistry, Physical

An atomic insight into BiOBr/La2Ti2O7 p-n heterojunctions: interfacial charge transfer pathway and photocatalysis mechanism

Huizhong Wu et al.

CATALYSIS SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Constructing La2B2O7 (B = Ti, Zr, Ce) Compounds with Three Typical Crystalline Phases for the Oxidative Coupling of Methane: The Effect of Phase Structures, Superoxide Anions, and Alkalinity on the Reactivity

Junwei Xu et al.

ACS CATALYSIS (2019)

Add to Collection

Article Chemistry, Physical

Ultrathin 2D type-II p-n heterojunctions La2Ti2O7/In2S3 with efficient charge separations and photocatalytic hydrogen evolution under visible light illumination

Erbing Hua et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection

Article Chemistry, Physical

Change in photocatalytic NO removal mechanisms of ultrathin BiOBr/BiOI via NO3- adsorption

Xian Shi et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2019)

Add to Collection

Article Engineering, Environmental

Interfacial Charging-Decharging Strategy for Efficient and Selective Aerobic NO Oxidation on Oxygen Vacancy

Hao Li et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Roles of N-Vacancies over Porous g-C3N4 Microtubes during Photocatalytic NOx Removal

Zhenyu Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Controlling the secondary pollutant on B-doped g-C3N4 during photocatalytic NO removal: a combined DRIFTS and DFT investigation

Jiarui Li et al.

CATALYSIS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Au Nanorod Photosensitized La2Ti2O7 Nanosteps: Successive Surface Heterojunctions Boosting Visible to Near-Infrared Photocatalytic H-2 Evolution

Xiaoyan Cai et al.

ACS CATALYSIS (2018)

Add to Collection

Article Chemistry, Physical

TiO2-supported Ag nanoclusters with enhanced visible light activity for the photocatalytic removal of NO

Yanyan Duan et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Chemistry, Physical

Oxygen vacancy engineering of Bi2O3/Bi2O2CO3 heterojunctions: Implications of the interfacial charge transfer, NO adsorption and removal

Yanfeng Lu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2018)

Add to Collection

Article Chemistry, Physical

Reaction Mechanism of Low-Temperature Selective Catalytic Reduction of NO(x )over Fe-Mn Oxides Supported on Fly-Ash-Derived SBA-15 Molecular Sieves: Structure-Activity Relationships and in Situ DRIFT Analysis

Ge Li et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Synergistic Effect of Doping and Compositing on Photocatalytic Efficiency: A Case Study of La2Ti2O7

Zuju Ma et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

Monodisperse bismuth nanoparticles decorated graphitic carbon nitride: Enhanced visible-light-response photocatalytic NO removal and reaction pathway

Guangming Jiang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Growth of Lithium Lanthanum Titanate Nanosheets and Their Application in Lithium-Ion Batteries

Xi Lin et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Hierarchical porous ZnWO4 microspheres synthesized by ultrasonic spray pyrolysis: Characterization, mechanistic and photocatalytic NOx removal studies

Yu Huang et al.

APPLIED CATALYSIS A-GENERAL (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrothermal synthesis and formation mechanism of the single-crystalline Bi4Ti3O12 nanosheets with dominant (010) facets

Gang Xu et al.

CRYSTENGCOMM (2016)

Add to Collection

Article Materials Science, Ceramics

Crystallographic Structure and Ferroelectricity of (AxLa1-x)2Ti2O7 (A = Sm and Eu) Solid Solutions with High Tc

Chen Chen et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Fabrication of La2Ti2O7 Crystals Using an Alkali-Metal Molybdate Flux Growth Method and Their Nitridability To Form LaTiO2N Crystals under a High-Temperature NH3 Atmosphere

Mirabbos Hojamberdiev et al.

INORGANIC CHEMISTRY (2015)

Add to Collection

Article Chemistry, Physical

Electrospun Cr-doped Bi4Ti3O12/Bi2Ti2O7 heterostructure fibers with enhanced visible-light photocatalytic properties

Hongfei Shi et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Materials Science, Ceramics

Band-gap energy estimation from diffuse reflectance measurements on sol-gel and commercial TiO2: a comparative study

Rosendo Lopez et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Chemistry, Physical

Mechanism Study of NO Catalytic Oxidation over MnOx/TiO2 Catalysts

Nian Tang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Add to Collection

Article Spectroscopy

Micro-Raman study of Zr-substituted Bi4Ti3O12 ceramics

S. R. Das et al.

JOURNAL OF RAMAN SPECTROSCOPY (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Flat-band potential of a semiconductor: using the Mott-Schottky equation

K. Gelderman et al.

JOURNAL OF CHEMICAL EDUCATION (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Lattice vibration of bismuth titanate nanocrystals prepared by metalorganic decomposition

ZC Ling et al.

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.