☆ 4.8 Review

A2-A1-D-A1-A2-Type Nonfullerene Acceptors

ADVANCED MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Achieving 31% efficiency in organic photovoltaic cells under indoor light using a low energetic disorder polymer donor

Pengqing Bi et al.

Summary: This study synthesized a series of polymers based on thiadiazole, 4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b:4,5-b']dithiophene, and fluorinated BDT-T units. These polymers exhibited wide bandgaps and low energetic disorders, achieving high power conversion efficiencies of over 15%, 14.79%, and 18.28% after blending with the non-fullerene acceptor FTCC-Br.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

Add to Collection

Review Nanoscience & Nanotechnology

Semitransparent organic photovoltaics for building-integrated photovoltaic applications

Yongxi Li et al.

Summary: The narrow and intense absorption spectra of organic materials offer the possibility to develop efficient organic photovoltaic devices that are different from other solar cell technologies. By selectively absorbing light in specific ranges, these materials can be used for power-generating windows that are semitransparent in the visible range but absorb strongly in the ultraviolet and infrared regions, providing a sustainable solution for clean energy generation.

NATURE REVIEWS MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Reducing Trap Density in Organic Solar Cells via Extending the Fused Ring Donor Unit of an A-D-A-Type Nonfullerene Acceptor for Over 17% Efficiency

Jixiang Zhou et al.

Summary: The high trap density in organic solar cells is a major limitation for improving power conversion efficiencies. This study demonstrates that extending the donor core of nonfullerene acceptors from a heptacyclic unit to a nonacyclic unit efficiently reduces the trap density in the solar cells. This approach not only increases the mobility and inhibits charge-carrier recombination, but also achieves an impressive power conversion efficiency of 17.1% with a low nonradiative recombination energy loss.

ADVANCED MATERIALS (2023)

Add to Collection

Article Engineering, Environmental

Low-cost material combination based on PTQ10 and completely non-fused nonfullerene acceptor for high VOC organic photovoltaics

Linjiao Qin et al.

Summary: Developing low-cost photovoltaic materials, such as p-type polymers and n-type small molecules, for organic photovoltaic (OPV) cells is challenging. Non-fused nonfullerene acceptors have been attracting attention due to their simple synthesis and easy modification. In this study, a completely non-fused nonfullerene acceptor, Cl-BTA33, was designed and combined with a classic low-cost polymer, PTQ10, resulting in improved efficiency for outdoor and indoor applications.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Environmental

Organic photovoltaic cells offer ultrahigh VOC of ∼ 1.2 V under AM 1.5G light and a high efficiency of 21.2 % under indoor light

Zongtao Wang et al.

Summary: This study provides a solution to improve the open circuit voltage and power conversion efficiency of the D18 polymer by incorporating benzotriazole-based wide-bandgap acceptors (NFAs) into D18, successfully achieving higher V(OC) and PCE. The experimental results suggest that fluorination and chlorination are effective strategies to modulate the optoelectronic properties and improve the photovoltaic performance. In addition, a high-efficiency indoor OPV based on D18: Cl-BTA5 was achieved.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Modulating intermolecular interactions by collaborative material design to realize THF-processed organic photovoltaic with 1.3 V open-circuit voltage

Tingting Dai et al.

Summary: Efficient exciton dissociation and high power conversion efficiency are achieved in organic photovoltaics (OPVs) with a V-OC of 1.3 V or higher through rational material design. The collaborative design of terpolymer E18 and non-fullerene acceptor BTA3-4F ensures balanced intermolecular interactions, resulting in tighter molecular stacking and excellent phase separation. These results provide material design guidelines for optimizing intermolecular interactions and achieving efficient exciton dissociation in OPV devices with a V-OC of 1.3 V or higher.

ENERGY & ENVIRONMENTAL SCIENCE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

A Universal Nonhalogenated Polymer Donor for High-Performance Organic Photovoltaic Cells

Tao Zhang et al.

Summary: Two nonhalogenated polymers, PB1 and PB2, were prepared and tested in organic photovoltaic cells. PB2 showed superior power conversion efficiency when combined with BTP-eC9 and PBDB-TF, as well as good compatibility with various nonfullerene acceptors. When combined with a wide-bandgap electron acceptor (F-BTA3), PB2 achieved excellent PCE, demonstrating its potential for developing low-cost materials and expanding the application of OPV cells.

ADVANCED MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A High-Performance Nonfused Wide-Bandgap Acceptor for Versatile Photovoltaic Applications

Pengqing Bi et al.

Summary: This study synthesized three wide-bandgap nonfullerene acceptors with nonfused conjugated structures, among which GS-ISO demonstrated superior performance in terms of optical properties. The OPV cell based on GS-ISO showed excellent power conversion efficiency and stability, making it a promising candidate for various photovoltaic applications.

ADVANCED MATERIALS (2022)

Add to Collection

Article Polymer Science

The Subtle Structure Modulation of A2-A1-D-A1-A2 Type Nonfullerene Acceptors Extends the Photoelectric Response for High-Voltage Organic Photovoltaic Cells

Tingting Dai et al.

Summary: Subtle structural modifications of non-fullerene acceptors, especially introducing fused rings, are a simple and effective strategy to extend the photoelectric response, boost the short-circuit current (J(SC)), and ensure a high open-circuit voltage (V-OC) beyond 1.0 V in high-voltage organic photovoltaics (OPVs).

MACROMOLECULAR RAPID COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Physical

Tandem Organic Solar Cell with 20.2% Efficiency

Zhong Zheng et al.

Summary: A advanced interconnecting layer for tandem organic solar cell is developed in this study. By controlling the O-2 flux during evaporation, efficient electron extraction and low Schottky barrier are obtained, enabling effective charge recombination between two subcells. The tandem cell with the interconnecting layer shows a high efficiency of 20.27%.

JOULE (2022)

Add to Collection

Article Chemistry, Physical

Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology

Lei Zhu et al.

Summary: Morphological control of donor and acceptor domains is crucial for efficient organic photovoltaics, and this study demonstrates a double-fibril network strategy to achieve a high power conversion efficiency of 19.3%.

NATURE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Emerging Strategies toward Mechanically Robust Organic Photovoltaics: Focus on Active Layer

Cenqi Yan et al.

Summary: The mechanical stability of organic photovoltaics (OPVs) is crucial for their applications in various fields. This article analyzes the working scenarios of flexible OPVs and strategies to improve their mechanical stability. Recent achievements in enhancing the mechanical robustness of active layers are summarized, followed by an outlook on the future of this field.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Over 30% Efficient Indoor Organic Photovoltaics Enabled by Morphological Modification Using Two Compatible Non-Fullerene Acceptors

Chihyung Lee et al.

Summary: This study demonstrates the enhancement of efficiency and stability in indoor organic photovoltaic (OPV) through morphological modification in non-fullerene blends. The morphological modification improves OPV performance, especially under low-light conditions.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Carboxylate-Containing Wide-Bandgap Polymers for High-Voltage Non-Fullerene Organic Solar Cells

Xianda Li et al.

Summary: Carboxylate functionalization is an effective strategy for polymer modification to enhance polymer crystallinity and aggregation. In this study, carboxylate-containing polymers were paired with electron acceptors to achieve high-voltage organic solar cells. The results showed reduced energy loss, improved charge transport and dissociation, and high-performance indoor photovoltaics.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Isomerization of Asymmetric Ladder-Type Heteroheptacene-Based Small-Molecule Acceptors Improving Molecular Packing: Efficient Nonfullerene Organic Solar Cells with Excellent Fill Factors

Zhenghui Luo et al.

Summary: Moving the central core to the other side is an effective way to achieve isomerization and enhance photovoltaic performance. ThPy6 shows better molecular structure, orientation, and electron mobility compared to ThPy5, leading to excellent performance in organic solar cells.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Renewed Prospects for Organic Photovoltaics

Guichuan Zhang et al.

Summary: Organic photovoltaics (OPVs) have undergone three stages of development, including optimizing bulk heterojunctions, improving donor-acceptor match, and developing non-fullerene acceptors (NFAs). NFAs have resulted in higher power conversion efficiencies (PCEs) surpassing 15% due to reduced energy losses and increased quantum efficiencies. The review provides an update on recent progress in OPV technology, including novel NFAs and donors, understanding structure-property relationships, and commercialization challenges.

CHEMICAL REVIEWS (2022)

Add to Collection

Article Chemistry, Physical

Modulating the molecular orientation of linear benzodifuran-based isomeric polymers by exchanging the positions of chlorine and fluorine atoms

Tingting Dai et al.

Nano Energy (2022)

Add to Collection

Article Chemistry, Physical

High-Performance Ternary Organic Solar Cells through Incorporation of a Series of A2-A1-D-A1-A2 Type Nonfullerene Acceptors with Different Terminal Groups

Ai Lan et al.

Summary: This study demonstrates that the performance of ternary OSCs can be further improved by introducing three nonfullerene acceptors with similar backbones but different terminal groups. The A(1) unit plays a decisive role, and the devices incorporating BTA2 and BTA3 show enhanced short-circuit current density and fill factor simultaneously.

ACS ENERGY LETTERS (2022)

Add to Collection

Article Chemistry, Physical

High-performance organic photovoltaic modules using eco-friendly solvents for various indoor application scenarios

Qiang Wu et al.

Summary: A ternary system suitable for indoor applications has been reported, which can provide efficient energy supply and exhibit good light-emitting performance in indoor environments.

JOULE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Organic Photovoltaic Cells Based on Nonhalogenated Polymer Donors and Nonhalogenated A-DA'D-A-Type Nonfullerene Acceptors with High VOC and Low Nonradiative Voltage Loss

Jialing Zhou et al.

Summary: Compared with other hybrid solar cells, the performance of organic photovoltaic cells is limited due to the large voltage loss. By molecular engineering, a new acceptor BTA77 was designed and combined with polymers PBDB-T and PBT1-C, resulting in improved open-circuit voltage and efficiency, and reduced voltage loss.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Manipulating Charge Transfer and Transport via Intermediary Electron Acceptor Channels Enables 19.3% Efficiency Organic Photovoltaics

Lingling Zhan et al.

Summary: By adopting a ternary strategy to regulate the structure of symmetric-asymmetric non-fullerene acceptors, a balance between open-circuit voltage and short-circuit current density can be achieved in organic photovoltaics, leading to higher efficiency.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Low-cost and high-performance poly(thienylene vinylene) derivative donor for efficient versatile organic photovoltaic cells

Pengqing Bi et al.

Summary: This study introduces PTVT-BT, a poly(thienylene vinylene) derivative with a simple molecular structure and high-performance in terms of power conversion efficiency. The findings suggest that PTVT-BT holds promise for future industrialization of organic photovoltaics.

NANO ENERGY (2022)

Add to Collection

Editorial Material Nanoscience & Nanotechnology

The multifaceted potential applications of organic photovoltaics

Yingyue Hu et al.

Summary: Organic photovoltaic cells are thin, lightweight, flexible, and semi-transparent, opening up new possibilities for applications in agriculture, architecture, wearable electronics, and health science.

NATURE REVIEWS MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Asymmetric chlorination of A2-A1-D-A1-A2 type non-fullerene acceptors for high-voltage organic photovoltaics

Peiqing Cong et al.

Summary: In this study, an asymmetric small molecule nonfullerene acceptor was synthesized through chlorination on one side, resulting in a large dipole moment, close molecular packing, and high-efficiency charge transfer and transport. When blended with a carboxylate-based polymer donor, the acceptor achieved a high open-circuit voltage and a satisfactory power conversion efficiency, reaching some of the highest values for carboxylate-based polymers.

CHEMICAL COMMUNICATIONS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Effects of energetic disorder in bulk heterojunction organic solar cells

Jun Yuan et al.

Summary: Organic solar cells (OSCs) have made rapid progress in recent years through the development of novel organic photoactive materials, particularly non-fullerene acceptors (NFAs). However, the understanding of the interplay between molecular structure and optoelectronic properties lags significantly behind. The potential role of energetic disorder in OSCs has received little attention, but recent studies have shown that state-of-the-art NFA-based devices can achieve both low energetic disorder and high power conversion efficiency (PCE).

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Toward high-performance organic photovoltaics: the new cooperation of sequential solution-processing and promising non-fullerene acceptors

Siru Guo et al.

Summary: Organic photovoltaics (OPVs) are a promising new energy technology due to their light weight, low cost, and flexibility. However, challenges in morphology control and device stability need to be addressed. Sequential solution-processing and non-fullerene acceptors (NFAs) offer opportunities to improve device stability and performance.

MATERIALS HORIZONS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Halogenation on the Benzotriazole Unit of Non-Fullerene Acceptors in Organic Solar Cells with High Voltages

Tingting Dai et al.

Summary: Halogenation of the A(1) unit is a promising strategy for developing novel and effective A(2)-A(1)-D-A(1)-A(2)-type NFAs, as it can improve photovoltaic performance by increasing carrier mobility, reducing bimolecular recombination, and enhancing fluorescence quenching rate.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Over 17% Efficiency of Ternary Organic Photovoltaics Employing Two Acceptors with an Acceptor-Donor-Acceptor Configuration

Xiaoling Ma et al.

Summary: Ternary organic photovoltaics constructed with one wide-band-gap donor PM6 and two A-D-A-type acceptors (M-series M36 and MQ5) achieved a power conversion efficiency of 17.24%. The optimization of ternary OPVs was attributed to the complementary absorption spectra of M36 and MQ5, maximizing photon harvesting and charge transport in the active layers. Introducing an appropriate amount of MQ5 resulted in more than an 8.8% improvement in PCE and demonstrated the huge potential of A-D-A-type materials in constructing highly efficient OPVs using a ternary strategy.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Review Chemistry, Physical

The Path to 20% Power Conversion Efficiencies in Nonfullerene Acceptor Organic Solar Cells

Akchheta Karki et al.

Summary: The recent progress highlights how pairing new nonfullerene electron acceptors with suitable high-performing polymer electron donors has significantly improved the power conversion efficiencies of single-junction organic solar cells. Studies on the device photophysics of high performing polymer:NFA blends demonstrate the importance of morphology on efficiency, and further challenges need to be addressed in order to achieve PCEs of over 20% in NFA OSCs.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

High performance indoor light harvesters with a wide-gap donor polymer PBDB-T

Yun Yang et al.

Summary: Organic solar cells have attracted attention for indoor light harvesting, achieving high efficiency over 25% under 1000 lux 2700K LED illumination by combining a wide-gap polymer PBDB-T with various electron-accepting materials. The use of PBDB-T:BTA3 as an indoor cell shows optimal efficiency up to 25.6% with a desirable V-OC of 0.99 V.

ORGANIC ELECTRONICS (2021)

Add to Collection

Article Multidisciplinary Sciences

Increasing donor-acceptor spacing for reduced voltage loss in organic solar cells

Jing Wang et al.

Summary: This study demonstrates that high voltage losses in organic solar cells can be suppressed by controlling the spacing between the donor and acceptor materials, leading to improved power conversion efficiency. Increasing the DA spacing reduces non-radiative decay of charge carriers and enhances device voltage, pointing to a new research direction for breaking the performance bottleneck of organic solar cells.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A New Conjugated Polymer that Enables the Integration of Photovoltaic and Light-Emitting Functions in One Device

Ye Xu et al.

Summary: This study demonstrates the design and application of a new wide-bandgap polymer, PBQx-TCl, in photovoltaic and light-emitting devices. Devices fabricated with nonfullerene acceptors show high power conversion efficiency under various lighting conditions, showcasing the potential of PBQx-TCl-based devices in both photovoltaic and light-emitting functions.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Fluorination of the Quinoxaline-Based p-Type Polymer and n-Type Small Molecule for High VOC Organic Solar Cells

Hongru Ji et al.

Summary: The study demonstrates the effectiveness of using the same acceptor unit to construct both donor and acceptor materials, achieving high efficiency and higher open-circuit voltage by fine-tuning optoelectronic properties through the introduction of fluorine atoms.

JOURNAL OF PHYSICAL CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Physical

Carboxylate substituted pyrazine: A simple and low-cost building block for novel wide bandgap polymer donor enables 15.3% efficiency in organic solar cells

Jingnan Wu et al.

Summary: A novel wide bandgap polymer donor PFBCPZ was developed in this study, which achieved a high power conversion efficiency in organic solar cells (OSCs) when matched with a low bandgap acceptor IT-4F. This demonstrates the potential of low-cost, simple structured DTCPz as a promising building block for high-performance polymer donors in efficient OSCs.

NANO ENERGY (2021)

Add to Collection

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

A highly crystalline non-fullerene acceptor enabling efficient indoor organic photovoltaics with high EQE and fill factor

Fujin Bai et al.

Summary: A highly crystalline small molecular acceptor named FCC-Cl with an optical band gap of 1.71 eV is reported for indoor applications, achieving high external quantum efficiency and fill factor in OPVs. The devices based on D18:FCC-Cl demonstrated an impressive power conversion efficiency of 28.8% under 2,600 K LED lighting, and can achieve high efficiencies over a wide range of active-layer thicknesses, suitable for large-scale roll-to-roll printing processes.

JOULE (2021)

Add to Collection

Article Chemistry, Physical

Balancing the efficiency, stability, and cost potential for organic solar cells via a new figure of merit

Wenyan Yang et al.

Summary: The research found that as the thickness of the active layer of organic solar cells decreases, the thermal stability gradually increases, leading to the development of a new industrial index, i-FOM2.0, which helps address the balance between efficiency, stability, and cost, and accelerates the commercialization of OSCs.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Microwave-Assisted Synthesis of Non-Fullerene Acceptors and Their Photovoltaic Studies for High-Performance Organic Solar Cells

Sanchari Shome et al.

Summary: This study investigates the synthesis of non-fullerene electron acceptors using microwave-assisted cross-coupling methodology for solution-processed organic solar cells. Through molecular engineering and direct arylation, the study showcases a straightforward strategy to develop efficient n-type molecular semiconductors without the use of fullerene.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Physics, Condensed Matter

Investigating the reason for high FF from ternary organic solar cells

Danqin Li et al.

JOURNAL OF SEMICONDUCTORS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Low-cost materials for organic solar cells

Fuwen Zhao et al.

Summary: Organic solar cells (OSCs) have attracted significant attention as a promising candidate for sustainable energy, with their power conversion efficiency (PCE) reaching over 18%. However, the challenge lies in developing low-cost high-performance materials and environmentally friendly processing methods to reduce cost for industrial-scale production.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Physical

Ternary blend strategy in benzotriazole-based organic photovoltaics for indoor application

Yinglong Bai et al.

Summary: Organic photovoltaics suitable for indoor lighting can power IoT devices, and ternary structures can improve performance by increasing light absorption, charge transport, and reducing energy loss. Specific material systems can achieve excellent performance under test conditions, indicating that designing multi-component OPVs is a feasible way to enhance indoor photovoltaic systems.

GREEN ENERGY & ENVIRONMENT (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Design of ultra-high luminescent polymers for organic photovoltaic cells with low energy loss

Jingwen Wang et al.

Summary: Newly designed polymers PBTT-Cn based on carboxylate-functionalized thieno[3,2-b]thiophene units showed excellent electroluminescence external quantum efficiencies, with PBTT-C4 and C5 films having EQE(EL) over 1 x 10(-2). PBTT-C4 exhibited high EQE(EL), Vnon-radloss, leading to a high open-circuit voltage and a satisfactory PCE in PBTT-C4-based OPV cells.

CHEMICAL COMMUNICATIONS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Introducing methoxy or fluorine substitutions on the conjugated side chain to reduce the voltage loss of organic solar cells

You Chen et al.

Summary: This study successfully achieved the goal of reducing voltage loss and increasing short-circuit current density by adopting different material combinations, balancing V-OC and J(SC) to improve the power conversion efficiency of organic photovoltaic devices.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Add to Collection

Article Chemistry, Physical

Structural regulation of thiophene-fused benzotriazole as a π-bridge for A-π-D-π-A type acceptor:P3HT-based OSCs to achieve high efficiency

Jiacheng Wang et al.

Summary: The design of a new acceptor JC14 has significantly enhanced the power conversion efficiency of P3HT:JC14-based organic solar cells, demonstrating more balanced and higher short-circuit current density (J(SC)) and open-circuit voltage (V-OC).

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Oxygen Atoms Introduced at Different Positions of Non-Fullerene Acceptors in the Performance of Organic Solar Cells with Poly(3-hexylthiophene)

Bo Xiao et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

High-Performance Ternary Organic Solar Cells with Controllable Morphology via Sequential Layer-by-Layer Deposition

Minrun Ren et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Designing High Performance Nonfullerene Electron Acceptors with Rylene Imides for Efficient Organic Photovoltaics

Nagesh B. Kolhe et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Side chain engineering of quinoxaline-based small molecular nonfullerene acceptors for high-performance poly(3-hexylthiophene)-based organic solar cells

Bo Xiao et al.

SCIENCE CHINA-CHEMISTRY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent Progress in Chlorinated Organic Photovoltaic Materials

Huifeng Yao et al.

ACCOUNTS OF CHEMICAL RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

Synthesis of 1-Formyl-3-bromo-thieno[3,4-c]pyrrole-4,6-dione and the Application in A2-A1-D-A1-A2 Type Non-Fullerene Acceptor

Jianfeng Li et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Add to Collection

Article Chemistry, Physical

Guest-oriented non-fullerene acceptors for ternary organic solar cells with over 16.0% and 22.7% efficiencies under one-sun and indoor light

Yongjoon Cho et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Exploiting Ternary Blends for Improved Photostability in High-Efficiency Organic Solar Cells

Nicola Gasparini et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

High-Efficiency Indoor Organic Photovoltaics with a Band-Aligned Interlayer

Lik-Kuen Ma et al.

JOULE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Solution-Processed Organic Solar Cells with High Open-Circuit Voltage of 1.3 V and Low Non-Radiative Voltage Loss of 0.16 V

Ning An et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Selenium Heterocyclic Electron Acceptor with Small Urbach Energy for As-Cast High-Performance Organic Solar Cells

Zhenzhen Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning the intermolecular interaction of A2-A1-D-A1-A2type non-fullerene acceptors by substituent engineering for organic solar cells with ultrahighVOCof ∼1.2 V

Xiaochen Wang et al.

SCIENCE CHINA-CHEMISTRY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Utilizing an electron-deficient thieno[3,4-c]pyrrole-4,6-dione (TPD) unit as a π-bridge to improve the photovoltaic performance of A-π-D-π-A type acceptors

Jianfeng Li et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Add to Collection

Review Chemistry, Physical

Crystal Engineering in Organic Photovoltaic Acceptors: A 3D Network Approach

Hanjian Lai et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Energetic Disorder and Activation Energy in Efficient Ternary Organic Solar Cells with Nonfullerene Acceptor Eh-IDTBR as the Third Component

Jie Lv et al.

SOLAR RRL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning the electron-deficient core of a non-fullerene acceptor to achieve over 17% efficiency in a single-junction organic solar cell

Can Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Hybridization of Local Exciton and Charge-Transfer States Reduces Nonradiative Voltage Losses in Organic Solar Cells

Flurin D. Eisner et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Add to Collection

Article Chemistry, Physical

Benzotriazole-Based Acceptor and Donors, Coupled with Chlorination, Achieve a High VOC of 1.24 V and an Efficiency of 10.5% in Fullerene-Free Organic Solar Cells

Ailing Tang et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

End Group Tuning in Acceptor-Donor-Acceptor Nonfullerene Small Molecules for High Fill Factor Organic Solar Cells

Andrew Wadsworth et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

High Voc ternary nonfullerene polymer solar cells with improved efficiency and good thermal stability

Zhen Wang et al.

ORGANIC ELECTRONICS (2019)

Add to Collection

Article Energy & Fuels

Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications

Yong Cui et al.

NATURE ENERGY (2019)

Add to Collection

Article Chemistry, Physical

Open-Circuit Voltages Exceeding 1.26 V in Planar Methylammonium Lead Iodide Perovskite Solar Cells

Zhifa Liu et al.

ACS ENERGY LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Suppressing photo-oxidation of non-fullerene acceptors and their blends in organic solar cells by exploring material design and employing friendly stabilizers

Jing Guo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A thieno[3,4-b]pyrazine-based A2-A1-D-A1-A2 type low bandgap non-fullerene acceptor with 1,1-dicyanomethylene-3-indanone (IC) as the terminal group

Jianfeng Li et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Chemistry, Physical

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Jun Yuan et al.

JOULE (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Quinoxaline-Containing Nonfullerene Small-Molecule Acceptors with a Linear A(2)-A(1)-D-A(1)-A(2) Skeleton for Poly(3-hexylthiophene)-Based Organic Solar Cells

Bo Xiao et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

A Wide Band Gap Polymer with a Deep Highest Occupied Molecular Orbital Level Enables 14.2% Efficiency in Polymer Solar Cells

Sunsun Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Chemistry, Physical

Design rules for minimizing voltage losses in high-efficiency organic solar cells

Deping Qian et al.

NATURE MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

Organic solar cells based on non-fullerene acceptors

Jianhui Hou et al.

NATURE MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

The first thieno[3,4-b]pyrazine based small molecular acceptor with a linear A(2)-A(1)-D-A(1)-A(2) skeleton for fullerene-free organic solar cells with a high V-oc of 1.05 V

Jianfeng Li et al.

CHEMICAL COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

The Introduction of Fluorine and Sulfur Atoms into Benzotriazole-Based p-Type Polymers to Match with a Benzotriazole-Containing n-Type Small Molecule: The Same-Acceptor-Strategy to Realize High Open-Circuit Voltage

Ailing Tang et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneously Achieved High Open-Circuit Voltage and Efficient Charge Generation by Fine-Tuning Charge-Transfer Driving Force in Nonfullerene Polymer Solar Cells

Ailing Tang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Reducing the effciency-stability-cost gap of organic photovoltaics with highly effcient and stable small molecule acceptor ternary solar cells

Derya Baran et al.

NATURE MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Burn-in Free Nonfullerene-Based Organic Solar Cells

Nicola Gasparini et al.

ADVANCED ENERGY MATERIALS (2017)

Add to Collection

Article Polymer Science

P3HT-Based Photovoltaic Cells with a High Voc of 1.22 V by Using a Benzotriazole-Containing Nonfullerene Acceptor End-Capped with Thiazolidine-2,4-dione

Bo Xiao et al.

ACS MACRO LETTERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Wide bandgap small molecular acceptors for low energy loss organic solar cells

Pan Ye et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Add to Collection

Article Chemistry, Physical

Highly Efficient and Reproducible Nonfullerene Solar Cells from Hydrocarbon Solvents

Andrew Wadsworth et al.

ACS ENERGY LETTERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Effects of Inserting Thiophene as a π-Bridge on the Properties of Naphthalene Diimide-alt-Fused Thiophene Copolymers

Jing Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Efficient Ternary-Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance

Xiaopeng Xu et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

An Efficient, Burn in Free Organic Solar Cell Employing a Nonfullerene Electron Acceptor

Hyojung Cha et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Physics, Applied

Is organic photovoltaics promising for indoor applications?

Harrison K. H. Lee et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Reduced voltage losses yield 10% efficient fullerene free organic solar cells with > 1 V open circuit voltages

D. Baran et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor

Sarah Holliday et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells

Yuze Lin et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

A Rhodanine Flanked Nonfullerene Acceptor for Solution-Processed Organic Photovoltaics

Sarah Holliday et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Add to Collection

Review Chemistry, Physical

Halogenated Materials as Organic Semiconductors

Ming L. Tang et al.

CHEMISTRY OF MATERIALS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.