☆ 4.8 Article

Inducing an Amorphous Phase in Polymer Plastic Crystal Electrolyte for Effective Ion Transportation in Lithium Metal Batteries

ADVANCED FUNCTIONAL MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

SiO2 nanofiber composite gel polymer electrolyte by in-situ polymerization for stable Li metal batteries

Zhichuan Shen et al.

Summary: Superior SiO2 nanofiber composite gel polymer electrolytes (SNCGPEs) are developed for lithium metal batteries via in-situ ionic ring-opening polymerization of 1,3-dioxolane (DOL) monomers in SiO2 nanofiber membrane (PDOL-SiO2). PDOL-SiO2 exhibits high lithium ion transference number (tLi+) and ionic conductivity (Sigma) at 30 degrees C, with values of 0.80 and 1.68 x 10 -4 S/cm, respectively. The Li|PDOL-SiO2|Li cell shows a steady cycling performance for nearly 1400 h and the LFP|PDOL-SiO2|Li battery can steadily cycle with high capacity retention rates. The innovative strategy of designing PDOL molecular chains throughout the SiO2 nanofiber framework accelerates Li+ transportation, which is crucial for high-energy-density lithium metal batteries.

CHINESE CHEMICAL LETTERS (2023)

Add to Collection

Article Chemistry, Physical

Solid-State NMR Revealing the Impact of Polymer Additives on Li- Ion Motions in Plastic-Crystalline Succinonitrile Electrolytes

Julia Moeller et al.

Summary: In order to improve the safety of lithium-ion batteries, alternatives to liquid electrolytes are being widely studied. One of the promising alternatives is the plastic-crystal succinonitrile (SN) that can solvate various Li salts. By introducing polymers, the system can be further enhanced with higher melting points and adjustable properties.

JOURNAL OF PHYSICAL CHEMISTRY C (2023)

Add to Collection

Article Chemistry, Physical

Laminar composite solid electrolyte with succinonitrile-penetrating metal-organic framework (MOF) for stable anode interface in solid-state lithium metal

Ting Zhao et al.

Summary: The penetration of LSN electrolyte into the interlayer channels of MOF provides an ultra-thin and stable LSN-MOF composite solid-state electrolyte. This electrolyte shows remarkable ionic conductivity and interface stability, offering a potential solution for high-performance solid-state lithium metal batteries.

JOURNAL OF POWER SOURCES (2023)

Add to Collection

Review Chemistry, Multidisciplinary

Ultrathin Solid Polymer Electrolyte Design for High-Performance Li Metal Batteries: A Perspective of Synthetic Chemistry

Qian Wang et al.

Summary: This review evaluates the advantages and challenges of ultrathin solid polymer electrolytes and summarizes the fundamental requirements for designing and manufacturing high-performance ultrathin SPE. It provides an overview of related cases and critically evaluates the challenges and opportunities in this emerging field.

ADVANCED SCIENCE (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Solution-Processed Multiferroic Thin-Films with Large Magnetoelectric Coupling at Room-Temperature

Hamed Sharifi Dehsari et al.

Summary: Experimental realization of thin films with significant room-temperature magnetoelectric coupling coefficient α(ME) without an external DC magnetic field has been challenging. Here, large α(ME) of 750 +/- 30 mV Oe(-1) cm(-1) is achieved in multiferroic polymer nanocomposites (MPCs) thin films. The MPCs consist of PMMA-grafted cobalt-ferrite nanoparticles uniformly dispersed in piezoelectric polymer P(VDF-TrFE). Nanoparticle agglomeration is reduced by surface functionalization with PMMA, enabling the uniform dispersion of nanoparticles in submicrometer thin films. This research can promote the development of flexible and printable multiferroic electronic devices for sensing and memory applications.

ACS NANO (2023)

Add to Collection

Correction Chemistry, Multidisciplinary

In Situ Cross-Linked Plastic Crystal Electrolytes for Wide-Temperature and High-Energy-Density Lithium Metal Batteries (Apr, 10.1002/adfm.202201861, 2022)

Aoxuan Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Succinonitrile-Polymer Composite Electrolytes for Li-Ion Solid-State Batteries?The Influence of Polymer Additives on Thermomechanical and Electrochemical Properties

Vanessa van Laack et al.

Summary: A study investigated the influence of different polymers, such as PEO, PVP, PEC, and PAN, on the properties of a plastic crystalline electrolyte (PCE) consisting of LiTFSI in SN. The results showed that the chosen polymer affected the melting temperature, overall crystallinity, sublimation process, and mechanical strength of the PCE. The addition of PAN increased both the mechanical stability and ionic conductivity, making the PCE + PAN composition attractive for battery applications.

ACS OMEGA (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Ion conducting elastomer designed from thiourea-based dynamic covalent bonds with reprocessing capability

B. Kim et al.

Summary: Developing ion conducting elastomers (ICE) with reprocessing capability is important for resource conservation and environmental protection. However, elastomers with covalent cross-linking are challenging to reprocess due to their thermoset properties. To overcome this challenge, a thiourea-based dynamic covalent network was utilized to design the ICE. The analysis of the interaction between lithium salt and polymer chain led to the selection of LiTFSI. It was found that the dynamic covalent network's formation and behavior were influenced by the interaction between the polymer chain and lithium salts. The resulting dynamic covalent elastomer can be reprocessed through various methods and exhibits dimensional stability and ionic conductivity. (c) 2023 Elsevier Ltd. All rights reserved.

MATERIALS TODAY CHEMISTRY (2023)

Add to Collection

Article Engineering, Chemical

Fluorine grafted gel polymer electrolyte by in situ construction for high-voltage lithium metal batteries

Junqiao Huang et al.

Chemical Engineering Journal (2023)

Add to Collection

Article Multidisciplinary Sciences

Elastomeric electrolytes for high-energy solid-state lithium batteries

Michael J. Lee et al.

Summary: Elastomeric solid-state electrolytes with mechanical robustness, high ionic conductivity, low interfacial resistance and high lithium-ion transference number enable stable operation of high-energy, solid-state lithium batteries.

NATURE (2022)

Add to Collection

Article Engineering, Environmental

Poly (vinyl ethylene carbonate)-based dual-salt gel polymer electrolyte enabling high voltage lithium metal batteries

Qingjie Zhou et al.

Summary: A novel dual-salt gel polymer electrolyte has been developed, demonstrating high ionic conductivity and excellent cycling stability, which can improve the high-voltage tolerance and safety of rechargeable lithium metal batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Anchoring succinonitrile by solvent-Li+ associations for high-performance solid-state lithium battery

Wenping Zha et al.

Summary: A new type of highly Li+ conductive and mechanically strong composite solid-state electrolyte, SN-CSSE, was developed for room-temperature solid-state lithium battery with excellent ionic conductivity and cycling stability. The electrolyte showed wide electrochemical window, strong mechanical strength, and high interfacial compatibility with Li, demonstrating great potential for safety-critical battery systems.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Mechanically Interlocked Polymer Electrolyte with Built-In Fast Molecular Shuttles for All-Solid-State Lithium Batteries

Jiae Seo et al.

Summary: Molecular shuttles inside mechanically interlocked polymer can enhance the performance of solid polymer electrolyte. Polyrotaxane-based MIP electrolyte exhibits high ionic conductivity and excellent electrochemical stability, while the built-in molecular shuttle design enables high-performance lithium-ion batteries.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

PEO based polymer in plastic crystal electrolytes for room temperature high-voltage lithium metal batteries

Yulong Liu et al.

Summary: A novel type of poly(ethylene oxide) based polymer in plastic crystal electrolyte was designed to achieve stable cathode/electrolyte and anode/electrolyte interfaces simultaneously through strong intermolecular interactions. The Li-Li symmetric cells with the polymer in plastic crystal electrolyte exhibited stable operation for 700 hours at 1 mA cm(-2) and delivered a high discharge capacity of 169 mA h g(-1) with a capacity retention of 80% after 120 cycles, even at a high cut-off voltage of 4.4 V. This work highlights the development of PEO-based electrolytes with higher energy density through intermolecular design.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

An amorphous polyvinylidene fluoride-co-hexafluoropropylene based gel polymer electrolyte for sodium-ion cells

S. Janakiraman et al.

Summary: In this study, an electrospun amorphous PVDF-co-HFP based separator was shown to be a superior gel electrolyte material suitable for sodium-ion batteries. The amorphous gel polymer electrolyte (AGPE) displayed high ionic conductivity and wide electrochemical stability, leading to excellent cycling performance in the sodium-ion cell system.

APPLIED SURFACE SCIENCE ADVANCES (2021)

Add to Collection

Article Chemistry, Physical

Peculiarly fast Li-ion conduction mechanism in a succinonitrile-based molecular crystal electrolyte: a molecular dynamics study

Ryoma Sasaki et al.

Summary: Atomistic MD simulations have revealed that Li-ion vacancies in Li(FSA)(SN)(2) crystals support a one-dimensional Li-ion hopping pathway, contrary to conventional wisdom, explaining the exceptionally fast Li-ion conduction. The insights gained from this study on the behavior of organic moieties and Li-ion conduction will drive the development of highly conductive molecular crystals.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Applied

Quasi-solid-state polymer plastic crystal electrolyte for subzero lithium-ion batteries

Yumei Zhou et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Add to Collection

Review Materials Science, Multidisciplinary

Ionic conductive polymers as artificial solid electrolyte interphase films in Li metal batteries - A review

Shilun Gao et al.

MATERIALS TODAY (2020)

Add to Collection

Article Engineering, Environmental

A poly (vinylidene fluoride-hexafluoropropylene) based three-dimensional network gel polymer electrolyte for solid-state lithium-sulfur batteries

Y. Xia et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Multidisciplinary Sciences

High-performance all-solid-state batteries enabled by salt bonding to perovskite in poly(ethylene oxide)

Henghui Xu et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

Add to Collection

Article Chemistry, Physical

High-Efficiency Lithium-Metal Anode Enabled by Liquefied Gas Electrolytes

Yangyuchen Yang et al.

JOULE (2019)

Add to Collection

Article Chemistry, Physical

Self-Stabilized Solid Electrolyte Interface on a Host-Free Li-Metal Anode toward High Areal Capacity and Rate Utilization

Zhenglin Hu et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Review Chemistry, Physical

Recent Progress of the Solid-State Electrolytes for High-Energy Metal-Based Batteries

Lei Fan et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Energy & Fuels

Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries

Ziqi Zeng et al.

NATURE ENERGY (2018)

Add to Collection

Article Nanoscience & Nanotechnology

A Cross-Linking Succinonitrile-Based Composite Polymer Electrolyte with Uniformly Dispersed Vinyl-Functionalized SiO2 Particles for Li-Ion Batteries

Kai Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Solvation structure around the Li+ ion in succinonitrile-lithium salt plastic crystalline electrolytes

Yuneng Shen et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

Add to Collection

Article Multidisciplinary Sciences

Superconcentrated electrolytes for a high-voltage lithium-ion battery

Jianhui Wang et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Polymer Science

Miscibility, crystallization and annealing studies of poly(vinylidene fluoride)/hyperbranched polyester blends

Dhevagoti Manjula Dhevi et al.

POLYMER (2014)

Add to Collection

Article Chemistry, Physical

Highly conductive, completely amorphous polymer electrolyte membranes fabricated through photo-polymerization of poly(ethylene glycol diacrylate) in mixtures of solid plasticizer and lithium salt

Mauricio Echeverri et al.

SOLID STATE IONICS (2014)

Add to Collection

Article Chemistry, Physical

Nanoindentation testing of separators for lithium-ion batteries

Ion C. Halalay et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Polymer Science

Ionic Conductivity in Relation to Ternary Phase Diagram of Poly(ethylene oxide), Succinonitrile, and Lithium Bis(trifluoromethane)sulfonimide Blends

Mauricio Echeverri et al.

MACROMOLECULES (2012)

Add to Collection

Article Chemistry, Physical

Study of Ion Transport in Lithium Perchlorate-Succinonitrile Plastic Crystalline Electrolyte via Ionic Conductivity and in Situ Cryo-Crystallography

Supti Das et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2009)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Structure of Plastic Crystalline Succinonitrile: High-Resolution in situ Powder Diffraction

Sarmimala Hore et al.

ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE (2009)

Add to Collection

Article Chemistry, Multidisciplinary

Succinonitrile as a versatile additive for polymer electrolytes

Li-Zhen Fan et al.

ADVANCED FUNCTIONAL MATERIALS (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Semiempirical GGA-type density functional constructed with a long-range dispersion correction

Stefan Grimme

JOURNAL OF COMPUTATIONAL CHEMISTRY (2006)

Add to Collection

Article Electrochemistry

Composite effects in poly(ethylene oxide)-succinonitrile based all-solid electrolytes

Li-Zhen Fan et al.

ELECTROCHEMISTRY COMMUNICATIONS (2006)

Add to Collection

Article Chemistry, Physical

The plastic-crystalline phase of succinonitrile as a universal matrix for solid-state ionic conductors

PJ Alarco et al.

NATURE MATERIALS (2004)

Add to Collection

Article Chemistry, Physical

Fast ion conduction in molecular plastic crystals

S Long et al.

SOLID STATE IONICS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.