4.7 Article

High-throughput investigation of Cr-N cluster formation in Fe-35Ni-Cr system during low-temperature nitriding

Journal

ACTA MATERIALIA
Volume 253, Issue -, Pages -

Publisher

PERGAMON-ELSEVIER SCIENCE LTD
DOI: 10.1016/j.actamat.2023.118921

Keywords

Spinodal decomposition; Austenitic steel; Nitriding; Three-dimensional atom probe (3dap); Expanded austenite

Ask authors/readers for more resources

This study investigates the dependence of Cr-N cluster formation in the austenite phase on Cr concentration in the Fe-35Ni and Fe-35Ni-30Cr alloys. The nanostructures of gamma N were characterized using transmission electron microscopy and three-dimensional atom probe, revealing variations in nanosized Cr-N clustering. Computational thermodynamics of chemical driving force, strain energy, and modulation wavelength for coherent spinodal were performed, and the results were consistent with observed nanostructure evolution. Furthermore, increasing Ni content in the alloys promotes spinodal decomposition.
The expanded austenite (gamma N) produced by low-temperature nitriding of austenitic stainless steels with a Cr content of 18-20 at% is conventionally regarded as a nitrogen-supersaturated fcc solid solution with Cr-N shortrange ordering, while obvious clustering between Cr and N in gamma N was recently reported for a Fe-35Ni-10Cr (at%) alloy. To investigate the dependence of Cr-N cluster formation on Cr concentration in gamma N, a high-throughput approach is proposed in the present work where a diffusion couple of Fe-35Ni and Fe-35Ni-30Cr alloys was plasma-nitrided at 673 K for 30 h. Systematic nanostructure characterization of the gamma N conducted by transmission electron microscopy (TEM) and three-dimensional atom probe (3DAP) revealed the variations in nanosized Cr-N clustering as modulated structures with different Cr content. Considering a simultaneous concentration fluctuation of Cr and N, computational thermodynamics of chemical driving force, strain energy, and modulation wavelength for coherent spinodal were performed, and the results were consistent with observed nanostructure evolution. The nanostructures of gamma N in austenitic stainless steels were also understood as further increments of Cr and N from a moderate composition lowered the driving force. The spinodal decomposition is also promoted by increasing Ni content in the alloys.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available