☆ 4.8 Article

A Natural Gradient Biological-Enabled Multimodal Triboelectric Nanogenerator for Driving Safety Monitoring

ACS NANO (2023)

Related references

Note: Only part of the references are listed.

Article Urology & Nephrology

The Butterfly: A Novel Minimally Invasive Transurethral Retraction Device for Benign Hypertrophy of the Prostate

Ran Katz et al.

Summary: The study evaluated the safety, efficacy, and impact of the Butterfly Prostatic Retraction device on lower urinary tract symptoms. The results demonstrated the feasibility and good tolerability of the device in improving urinary flow, reducing IPSS score, and enhancing quality of life.

UROLOGIA INTERNATIONALIS (2023)

Add to Collection

Article Chemistry, Physical

Achieving a Large Driving Force on Triboelectric Nanogenerator by Wave-Driven Linkage Mechanism for Harvesting Blue Energy toward Marine Environment Monitoring

Jiajia Han et al.

Summary: A cylindrical wave-driven linkage mechanism triboelectric nanogenerator (WLM-TENG) is designed and fabricated to effectively harvest water wave energy. The force generated by water waves is used to drive the TENG through its mechanical structure, allowing it to overcome resistance and produce output current and power. Self-powered applications such as LEDs and water quality detection are successfully demonstrated. This work contributes to the practical applications of marine environment monitoring.

ADVANCED ENERGY MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Directional skid resistance assessment of horizontal-curve pavements

Bo Zhou et al.

Summary: This research demonstrates the significant influence of directional polishing effects on skid resistance in different directions caused by cornering traffic. The effect varies along different road segments, with unique characteristics observed on horizontal curves.

ROAD MATERIALS AND PAVEMENT DESIGN (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Midinfrared Spectroscopic Analysis of Aqueous Mixtures Using Artificial- Intelligence-Enhanced Metamaterial Waveguide Sensing Platform

Chengkuo Lee et al.

Summary: This article introduces an artificial intelligence-enhanced metamaterial waveguide sensing platform for the analysis of aqueous mixtures in the mid-infrared spectrum. With this platform, the absorption spectra of ternary mixtures in water can be successfully distinguished and decomposed to predict concentration. Additionally, accurate classification of 64 mixing ratios and four concentrations (below the detection limit of 972 ppm) with a classification accuracy of 98.88% and 92.86% respectively, as well as concentration prediction with root-mean-squared error ranging from 0.107% to 1.436%, are achieved. This research demonstrates the potential of further extending this sensing platform to a mid-infrared spectrometer-on-chip for data analytics of multiple organic components in aqueous environments.

ACS NANO (2023)

Add to Collection

Article Mechanics

Modelling of functionally graded triply periodic minimal surface (FG-TPMS) plates

H. Nguyen-Xuan et al.

Summary: This paper investigates a new model of porous plates called Functionally Graded Triply Periodic Minimal Surface (FG-TPMS) plates. The effective moduli and Poisson's ratio of TPMS structures are evaluated using a fitting technique based on a two-phase piece-wise function. The mechanical characteristics of the FG-TPMS plates are verified through numerical examples, demonstrating their reliability and accuracy.

COMPOSITE STRUCTURES (2023)

Add to Collection

Article Thermodynamics

Adoption of triply periodic minimal surface structure for effective metal hydride-based hydrogen storage

Luthfan Adhy Lesmana et al.

Summary: This study aims to develop a MH-based hydrogen storage system using a TPMS structure. A mathematical model was developed to analyze and improve its performance, and the analysis was validated with experimental data. The study found that improving cooling conditions can increase the absorption rate, and the proposed TPMS reactor design can withstand working pressure and load. The important finding is that the TPMS-based structure shows higher hydrogen storage performance and forced convection is a preferable cooling solution for efficient and sufficient cooling.

ENERGY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Robust triboelectric information-mat enhanced by multi-modality deep learning for smart home

Yanqin Yang et al.

Summary: This research develops a digital-twin smart home system that utilizes robust TENG technology for smart home monitoring and multi-modality information generation. By eliminating the influence of environmental changes and achieving arbitrary position sensing, the accuracy of user identification is improved. Additionally, by projecting the information into virtual reality, the visualization of the smart home is achieved.

INFOMAT (2023)

Add to Collection

Article Multidisciplinary Sciences

Filling the gap between topological insulator nanomaterials and triboelectric nanogenerators

Mengjiao Li et al.

Summary: This article introduces the use of topological insulators to enrich the current triboelectric family of materials and sensing technologies. The topological insulator-based triboelectric nanogenerator shows promising potential for self-powered wearable electronics and scalable sensing technologies.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

A Dual-Mode Triboelectric Nanogenerator for Wind Energy Harvesting and Self-Powered Wind Speed Monitoring

Lixia He et al.

Summary: A high-performance dual-mode triboelectric nanogenerator is proposed, which can efficiently collect wind energy and monitor wind speed in real-time, with excellent durability and energy-harvesting efficiency.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Gyroscope-Structured Triboelectric Nanogenerator for Harvesting Multidirectional Ocean Wave Energy

Qi Gao et al.

Summary: A gyroscope-structured triboelectric nanogenerator is proposed for harvesting multidirectional ocean wave energy. The experiments show that the generator exhibits good durability in water.

ACS NANO (2022)

Add to Collection

Article Chemistry, Physical

Waterbomb-origami inspired triboelectric nanogenerator for smart pavement-integrated traffic monitoring

Yafeng Pang et al.

Summary: This study presents a novel approach for traffic monitoring using a waterbomb-origami-inspired triboelectric nanogenerator (WO-TENG). The WO-TENG integrates smart pavement and offers lightweight, cost-effective, excellent deformability, flexibility, and self-rebounding properties. The electrical performance of the WO-TENG is significantly improved compared to existing origami-based TENG, and multiple tribo-pairs show great synchronicity. The fully-packaged self-driven WO-TENG successfully decouples the influence of vehicle speed and weight on sensing accuracy, indicating its feasibility and stability for traffic monitoring. Accurate evaluation of vehicle speed, number, and types can be achieved, regardless of voltage amplitude and time interval electrical wave.

NANO RESEARCH (2022)

Add to Collection

Review Chemistry, Physical

Triboelectric nanogenerator as next-generation self-powered sensor for cooperative vehicle-infrastructure system

Yafeng Pang et al.

Summary: Triboelectric nanogenerators (TENG) have significant potential for self-powered sensing due to their high sensitivity, low limitation, and high efficiency. Utilizing TENG in Cooperative Vehicle Infrastructure System (CVIS) can advance intelligent transportation systems. Summarizing the applications of TENG in human, vehicle, road, and environmental aspects promotes the adoption of triboelectric self-powered sensing technology in the transportation field.

NANO ENERGY (2022)

Add to Collection

Article Engineering, Environmental

Tailoring of photocurable ionogel toward high resilience and low hysteresis 3D printed versatile porous flexible sensor

Shuqiang Peng et al.

Summary: In this work, researchers prepared a photocurable resin containing ionic liquids and hydrogen bond-rich acrylate monomer, and combined it with an optimized lattice structure to fabricate porous ionogel flexible sensors (PIFS). The PIFS showed higher pressure sensitivity and lower hysteresis, providing reliable signals during long-term loading. The photocurable resin was also found to be suitable for printing customized PIFS with high stretchability and low Young's modulus using a digital light processing 3D printer.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Construction & Building Technology

Analysis of skid resistance and braking distance of aircraft tire landing on grooved runway pavement

Junyu Qian et al.

Summary: This study developed a tire-pavement-water interaction model considering squared pavement grooves to predict the friction coefficient and evaluate braking distance on wet grooved runways. The results show that tire wear and water film thickness significantly affect the friction force, and the worn tire tends to lose more friction than the new tire with increased speed and water film thickness.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical and biological properties of enhanced porous scaffolds based on triply periodic minimal surfaces

Sijia Zou et al.

Summary: An enhanced porous scaffold based on triply periodic minimal surfaces (TPMS) is proposed and manufactured using laser powder bed fusion (LPBF). The scaffold features smooth surfaces, controllable pores, and excellent mechanical properties. Experimental results demonstrate that the enhanced porous scaffold meets the requirements of human bones in terms of elastic modulus, compressive strength, and permeability. It also exhibits good biocompatibility.

MATERIALS & DESIGN (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Artificial Intelligence of Things (AIoT) Enabled Floor Monitoring System for Smart Home Applications

Qiongfeng Shi et al.

Summary: This study develops a smart floor monitoring system through the synergistic integration of highly reliable triboelectric coding mats and deep-learning-assisted data analytics, which demonstrates highly stable detection unaffected by ambient parameters and operational methods. By incorporating deep-learning-assisted data analytics, the system enables various smart home monitoring and interactions, showing a promising advancement in floor sensing technology for smart home applications.

ACS NANO (2021)

Add to Collection

Article Engineering, Multidisciplinary

Additive manufacturing of high-performance carbon-composites: An integrated multi-axis pressure and temperature monitoring sensor

Hang-Gyeom Kim et al.

Summary: This study focuses on the development of a multi-axis pressure sensor integrated with a temperature-sensing element using fused filament fabrication (FFF) 3D printing of conductive carbon-based composites. By calibrating the responses of an applied force and temperature, the direction of pressure and magnitude of temperature can be evaluated separately. The additive manufactured dual pressure and temperature sensor could open up broad applications such as human motion monitoring systems and force sensing.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Detection of driving actions on steering wheel using triboelectric nanogenerator via machine learning

Haodong Zhang et al.

Summary: This study investigates the use of TENG as a sensor for detecting driver's steering actions, showing that TENG has the fastest response speed in driving simulator experiments. The trained machine learning algorithm achieves an accuracy of 92.0% in the test dataset, indicating the potential of using TENG as a sensor for driver's steering action detection.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Real-Time Monitoring System of Automobile Driver Status and Intelligent Fatigue Warning Based on Triboelectric Nanogenerator

Yuhong Xu et al.

Summary: The study introduces a smart system based on a triboelectric nanogenerator for real-time driver status monitoring and fatigue warning, which accurately judges driver status by recording steering wheel angle and analyzing data through a signal processing unit. This system has potential applications in traffic safety and intelligent driving.

ACS NANO (2021)

Add to Collection

Article Chemistry, Physical

Liquid-metal embedded sponge-typed triboelectric nanogenerator for omnidirectionally detectable self-powered motion sensor

Jihyeon Park et al.

Summary: The liquid-metal embedded sponge-typed TENG (LMST) exhibits high flexibility and stretchability, allowing for versatile applications and high power density output. By connecting wires, the LMST provides convenient electrical power supply and can enhance power by increasing the number of wires connected.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Paint based triboelectric nanogenerator using facile spray deposition towards smart traffic system and security application

Jonghyeon Yun et al.

Summary: The development of a paint-based TENG to generate electricity from wasted energy resulted in a 280% increase in output. The PBT showed stability through the use of various materials for fabrication.

NANO ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Isotropic porous structure design methods based on triply periodic minimal surfaces

Jiawei Feng et al.

Summary: This study proposes two strategies to design isotropic TPMS structures and investigates the relationship between TPMS parameters and elastic modulus or anisotropy properties through numerical homogenization theory and finite element analysis methods. By utilizing a Curvature-Wall thickness (CW) adjustment method, both elastic modulus and anisotropy properties can be controlled, and composite TPMS structures can be designed by combining TPMS units. Experimental results confirm the effectiveness and accuracy of the proposed approaches.

MATERIALS & DESIGN (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Hierarchical Honeycomb-Structured Electret/Triboelectric Nanogenerator for Biomechanical and Morphing Wing Energy Harvesting

Kai Tao et al.

Summary: The hierarchical honeycomb-inspired triboelectric nanogenerator (h-TENG) proposed in this study demonstrates remarkable energy harvesting capabilities for biomechanical and UAV applications. With a peak power density of 0.275 mW cm(-3) (or 2.48 mW g(-1)), the h-TENG shows potential for real-world applications in areas such as insole pressure mapping and UAV wing energy conversion.

NANO-MICRO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Self-powered electro-Fenton degradation system using oxygen-containing functional groups-rich biomass-derived carbon catalyst driven by 3D printed flexible triboelectric nanogenerator

Yingzheng Zhu et al.

Summary: This study utilizes 3D printing technology to fabricate a printed flexible wave-like triboelectric nanogenerator for driving the EF system in methylene blue degradation. By exploring high-quality EF catalysts and self-powered aspects, it provides a strong power supply to enhance system performance.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

3D printed triboelectric nanogenerator self-powered electro-Fenton degradation of orange IV and crystal violet system using N-doped biomass carbon catalyst with tunable catalytic activity

Yingzheng Zhu et al.

Summary: The self-powered electro-Fenton (EF) degradation system, based on triboelectric nanogenerator (TENG) technology, offers a constructive approach for organic pollution degradation in an energy-saving and environmentally friendly manner. By combining 3D printed flexible multilayered triboelectric nanogenerator (PFM-TENG) with N-doped porous carbon materials, a novel self-powered EF degradation system was built, achieving high degradation efficiencies for orange IV and crystal violet. This work not only provides ideas for the preparation of N-doped carbon catalytic materials with controllable catalytic activity, but also proposes an innovative scheme for the layout of future-oriented EF degradation systems and other electrochemical systems.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Artificial Intelligence-Enabled Caregiving Walking Stick Powered by Ultra-Low-Frequency Human Motion

Xinge Guo et al.

Summary: The walking stick, powered by ultralow-frequency human motion and equipped with advanced sensing features, serves as a healthcare monitoring platform for motion-impaired users. It provides functionalities such as identity recognition, disability evaluation, and motion status distinguishing, along with GPS tracing and environmental sensing. The caregiving walking stick demonstrates the potential to be an intelligent aid for motion-impaired users to live life with autonomy and safety.

ACS NANO (2021)

Add to Collection

Article Chemistry, Multidisciplinary

An inverting TENG to realize the AC mode based on the coupling of triboelectrification and air-breakdown

Chuncai Shan et al.

Summary: The TENG has two output modes - AC and DC, and an inverting TENG has been proposed to convert DC into AC by setting alternating polarity distribution areas. Unlike traditional AC-TENG, the inverting TENG allows for changing the width ratio and amplitude ratio of AC signals by adjusting the distributed width and electronegativity difference of two opposite materials.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dual Friction Mode Textile-Based Tire Cord Triboelectric Nanogenerator

Wanchul Seung et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Triboelectric speed bump as a self-powered automobile warning and velocity sensor

Deokjae Heo et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Multi-functional wind barrier based on triboelectric nanogenerator for power generation, self-powered wind speed sensing and highly efficient windshield

Yan Wang et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Engineering flexible 3D printed triboelectric nanogenerator to self-power electro-Fenton degradation of pollutants

Miao Tian et al.

NANO ENERGY (2020)

Add to Collection

Article Multidisciplinary Sciences

3D printed deformable sensors

Zhijie Zhu et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Engineering, Mechanical

Analysis of the stick-slip vibration of a new brake pad with double-layer structure in automobile brake system

Daogao Wei et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Civil

Evaluation of Vehicle Braking Performance on Wet Pavement Surface using an Integrated Tire-Vehicle Modeling Approach

Xiuyu Liu et al.

TRANSPORTATION RESEARCH RECORD (2019)

Add to Collection

Article Engineering, Mechanical

Measuring rubber friction using a Laboratory Abrasion Tester (LAT100) to predict car tire dry ABS braking

Marzieh Salehi et al.

TRIBOLOGY INTERNATIONAL (2019)

Add to Collection

Article Chemistry, Physical

On the force and energy conversion in triboelectric nanogenerators

Guoqiang Xu et al.

NANO ENERGY (2019)

Add to Collection

Review Materials Science, Multidisciplinary

Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices

Oraib Al-Ketan et al.

ADVANCED ENGINEERING MATERIALS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

On the Safe Road Toward Autonomous Driving Phase noise monitoring in radar sensors for functional safety compliance

Michael Gerstmair et al.

IEEE SIGNAL PROCESSING MAGAZINE (2019)

Add to Collection

Proceedings Paper Engineering, Civil

Skid resistance demands of asphalt pavement during the braking process of autonomous vehicles

Zheng Binshuang et al.

1ST INTERNATIONAL CONFERENCE ON ADVANCES IN CIVIL ENGINEERING AND MATERIALS (ACEM1) AND 1ST WORLD SYMPOSIUM ON SUSTAINABLE BIO-COMPOSITE MATERIALS AND STRUCTURES (SBMS1) (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Microarchitected Stretching-Dominated Mechanical Metamaterials with Minimal Surface Topologies

Oraib Al-Ketan et al.

ADVANCED ENGINEERING MATERIALS (2018)

Add to Collection

Review Chemistry, Multidisciplinary

An Overview of Materials with Triply Periodic Minimal Surfaces and Related Geometry: From Biological Structures to Self-Assembled Systems

Lu Han et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Multidisciplinary Sciences

Reprocessable thermosets for sustainable three-dimensional printing

Biao Zhang et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Physical

Three-dimensional ultraflexible triboelectric nanogenerator made by 3D printing

Baodong Chen et al.

NANO ENERGY (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Development of Proportional Pressure Control Valve for Hydraulic Braking Actuator of Automobile ABS

Che-Pin Chen et al.

APPLIED SCIENCES-BASEL (2018)

Add to Collection

Article Engineering, Mechanical

Compressible hexagonal-structured triboelectric nanogenerators for harvesting tire rotation energy

Tong Guo et al.

EXTREME MECHANICS LETTERS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Accurate Brake Torque Estimation With Adaptive Uncertainty Compensation Using a Brake Force Distribution Characteristic

Kyoungseok Han et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2017)

Add to Collection

Article Engineering, Civil

Incorporating Braking Distance Evaluation into Pavement Management System for Safe Road Operation

Longjia Chu et al.

TRANSPORTATION RESEARCH RECORD (2017)

Add to Collection

Article Biology

On the colour of wing scales in butterflies: iridescence and preferred orientation of single gyroid photonic crystals

Robert W. Corkery et al.

INTERFACE FOCUS (2017)

Add to Collection

Article Chemistry, Physical

Hysteretic behavior of contact force response in triboelectric nanogenerator

Myeong-Lok Seol et al.

NANO ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Three-dimensional Printing for Catalytic Applications: Current Status and Perspectives

Xintong Zhou et al.

ADVANCED FUNCTIONAL MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Triboelectric nanogenerators as a new energy technology: From fundamentals, devices, to applications

Guang Zhu et al.

NANO ENERGY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Three-Dimensional Printing of Complex Structures: Man Made or toward Nature?

Dong Lin et al.

ACS NANO (2014)

Add to Collection

Article Thermodynamics

Characteristics of a Tire Friction and Performances of a Braking in a High Speed Driving

Yumrak Oh et al.

ADVANCES IN MECHANICAL ENGINEERING (2014)

Add to Collection

Article Chemistry, Physical

Flexible triboelectric generator!

Feng-Ru Fan et al.

NANO ENERGY (2012)

Add to Collection

Article Engineering, Civil

Mechanistic Interpretation of Braking Distance Specifications and Pavement Friction Requirements

Ghim Ping Ong et al.

TRANSPORTATION RESEARCH RECORD (2010)

Add to Collection

Article Education, Scientific Disciplines

Dynamics of braking vehicles: from Coulomb friction to anti-lock braking systems

J. M. Tavares

EUROPEAN JOURNAL OF PHYSICS (2009)

Add to Collection

Article Ergonomics

An assessment of the skid resistance effect on traffic safety under wet-pavement conditions

Jose M. Pardillo Mayora et al.

ACCIDENT ANALYSIS AND PREVENTION (2009)

Add to Collection

Article Physics, Fluids & Plasmas

Discovery of a diamond-based photonic crystal structure in beetle scales

Jeremy W. Galusha et al.

PHYSICAL REVIEW E (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.