Related references
Note: Only part of the references are listed.
Article
Chemistry, Physical
Pan Ye et al.
Summary: A polymer coating with semi-interpenetrating network (s-IPN) structure was designed to protect the Zn anode in aqueous Zn-ion batteries. The s-IPN polymer coating enables uniform Zn deposition and excellent dendrite growth resistance, leading to significantly improved cycle life and stability of the battery.
JOURNAL OF POWER SOURCES
(2023)
Article
Chemistry, Physical
Hee Jae Kim et al.
Summary: This study addresses the issue of zinc dendritic growth in aqueous zinc-ion batteries by introducing a ZP coating, which successfully suppresses the dendrite growth and elucidates the chemical state of the dendrites. The coating layer ensures uniform deposition of zinc-derived compounds and prevents dendrites through cyclic reformation. The compatibility of this method is verified through cycles in a cell with NaV3O8 || ZP-coated zinc anode. This finding presents a practical solution for uniform zinc deposition in both aqueous and nonaqueous ZIBs.
ADVANCED ENERGY MATERIALS
(2023)
Article
Chemistry, Physical
Han Tian et al.
Summary: Inspired by the anti-corrosion strategy of the steel industry, researchers have developed a compounding corrosion inhibitor (CCI) as an electrolyte additive for the protection of zinc metal anode. The CCI can form a uniform and approximately 30 nm thick solid-electrolyte interphase (SEI) layer on the zinc anode, which effectively inhibits water corrosion and dendrite formation, allowing for long-term reversible zinc deposition and dissolution.
ADVANCED ENERGY MATERIALS
(2023)
Article
Chemistry, Applied
Xinxin Song et al.
Summary: Cu-based cathodes in aqueous batteries have potential advantages but are hindered by serious side reactions caused by the spontaneous formation of Cu2O. In this study, Na2EDTA is introduced to reshape the solvation structure of Cu2+ and modify the electrode/electrolyte interface, reducing the redox potential of Cu2+/Cu2O and inhibiting Cu2O formation. The change in solvation structure also promotes high local concentration and uniform deposition. These findings provide insights for the application of rechargeable Cu-based batteries.
JOURNAL OF ENERGY CHEMISTRY
(2023)
Article
Multidisciplinary Sciences
Xuesong Xie et al.
Summary: This study proposes a green and programmable electro-cross-linking strategy to synthesize highly hierarchical Zn-alginate electrolytes via superionic binding between carboxylate groups and Zn2+. The resulting electrolyte exhibits high reversibility, long-time stability, and high biocompatibility, making it suitable for modern wearable and implantable devices.
NATIONAL SCIENCE REVIEW
(2023)
Article
Chemistry, Physical
Jingjing Dong et al.
Summary: In order to address the issues of severe electrolyte corrosion and dendrite growth in aqueous batteries, the electrolyte/Zn interface needs to be engineered. A new method of coating a dense and robust layer of polysilane functionalized by -NH2 on Zn has been developed. This layer provides alkalinity and interaction with Zn2+, enhancing hydrolysis and regulating Zn2+ flux. The results show superior mechanical property, suppressed side reactions, and uniform plating/stripping, leading to excellent electrochemical performance in both symmetrical and asymmetrical cells, even under high loading of MnO2 and limited electrolyte conditions.
ENERGY STORAGE MATERIALS
(2023)
Article
Chemistry, Physical
Buke Wu et al.
Summary: This study improves the reversibility and utilization of zinc anodes by using three-dimensional printed graphene arrays, overcoming the limitations of current two-dimensional geometric design of zinc anodes. The graphene array structures can accommodate the volume change during zinc deposition/dissolution process and protect the battery from short circuits.
ENERGY STORAGE MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Jingmin Zhang et al.
Summary: This study reports a method for depositing (002)-textured and compact Zn on textureless substrates (commercial Zn, Cu, and Ti foils) at a medium-high galvanostatic current density. The electrodeposition of fine horizontal (002) nuclei and the advantages of (002)-orientated nuclei contribute to the suppressed hydrogen evolution and prolonged cycling life of Zn in this study. The resulting freestanding (002)-textured Zn film achieves a high cumulative capacity under a current density of 10 mA cm(-2) and a high depth of discharge (DOD) of 45.5%. The study provides important insights for the development of long-life Zn metal batteries.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Ruizheng Zhao et al.
Summary: The poor thermodynamic stability and sluggish electrochemical kinetics of metallic Zn anode in aqueous solution restrict its practical application. To overcome these problems, zincophilic surface modification strategies have been developed. However, there is still a lack of understanding regarding the selection of zincophilic sites based on the metrics of thermodynamics inertia and kinetics zincophilia. In this study, hetero-metallic interfaces are optimized to prioritize the Bi@Zn interface, which exhibits high efficiency due to its thermodynamics inertia and kinetics zincophilia. A practical metric for prioritizing zincophilic sites is proposed, and the Bi@Zn anode shows excellent performance in terms of low overpotential and stable cycle life.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Jinrong Luo et al.
Summary: In this study, the effect of a new high donor number (DN) additive pyridine on the performance of aqueous Zn ion batteries (AZIBs) was investigated. The results showed that the incorporation of pyridine could regulate the molecule distribution inside the inner Helmholtz plane (IHP), leading to improved stability and deep discharge performance of the battery.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Chemistry, Multidisciplinary
Huaizheng Ren et al.
Summary: A zwitterionic osmolyte-based molecular crowding electrolyte, achieved by adding betaine to the aqueous electrolyte, is proposed to address the challenges of dendrite growth, low plating/stripping efficiency, and high freezing point in aqueous Zn-ion batteries. The electrolyte effectively restrains side reactions and dendrite growth, enables high reversibility and dendrite-free plating/stripping, and lowers the freezing point for stable operation at low temperatures. This innovative concept injects new vitality into the development of multifunctional aqueous electrolytes.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Dongdong Wang et al.
Summary: This study proposes a feasible method for screening potential solid electrolyte interphase (SEI) materials on Zn anodes and experimentally verifies the excellent performance of Zn-3(BO3)(2) (ZBO) in Zn aqueous batteries, providing a reference for screening promising SEI materials for other metal anodes.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Physical
Fan Li et al.
Summary: Driven by theory calculations, a dual-interface strategy of surface texture engineering and passivation layer protection is developed to regulate the undesirable side reactions and deposition behavior of Zn metal anodes. This dual-interface enables the inhibition of side reactions, acceleration of de-solvation, homogenization of ion flux, and guided deposition orientation, resulting in significantly extended stability and improved reversibility of Zn electrodes. It can operate steadily for over 6600 hours and retain high reversibility even at higher current densities. Furthermore, it enhances the rate capability and cyclic stability in both aqueous and solid-state Zn metal batteries.
ADVANCED ENERGY MATERIALS
(2023)
Article
Chemistry, Physical
Ahmad Naveed et al.
Summary: A new organic electrolyte is proposed for zinc batteries, which can prevent battery failures and ensure safety. The electrolyte enables highly reversible and dendrite-free zinc anode. Molecular simulations reveal the beneficial role of the new electrolyte in stabilizing zinc anode.
Article
Chemistry, Multidisciplinary
Yu Liu et al.
Summary: In this study, glycine is used as an additive to modulate the solvation shell structure and enhance the interfacial stability of aqueous Zn ion batteries. The results show that the cycle life of the symmetrical cells reaches over 3200 h in glycine-containing electrolytes, and the Zn//NVO full cell exhibits exceptional cycling stability for 3000 cycles at 5 A g-1. Therefore, the proposed strategy for interfacial chemistry modulation, represented by glycine, has considerable potential in promoting the commercialization progress of aqueous batteries.
Article
Chemistry, Multidisciplinary
Wentao Yuan et al.
Summary: In this study, a current-controlled electrodeposition strategy was developed to texture the zinc electrodeposits in conventional aqueous electrolytes. The texture of the zinc deposits gradually transformed from (101) to (002) crystal plane by increasing the current density. The (002) textured zinc electrode showed stronger resistance to dendrite growth and interfacial side reactions, and supported the stable operation of full batteries with conventional V/Mn-based oxide cathodes.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2023)
Article
Chemistry, Multidisciplinary
Aosai Chen et al.
Summary: The researchers developed a multifunctional coating called PVA@SR-ZnMoO4 on the Zn anode, which consists of an outer layer PVA@SR to enhance flexibility and Zn2+ mobility, and an inner layer ZnMoO4 to inhibit dendrite growth and side reactions. The cooperation between these layers improved the performance of the Zn anode.
ENERGY & ENVIRONMENTAL SCIENCE
(2023)
Article
Materials Science, Multidisciplinary
Yanfen Liu et al.
Summary: Designing a multifunctional separator with abundant ion migration paths is crucial for tuning the ion transport in rocking-chair-type batteries. In this study, a polydopamine-functionalized PVDF nanofibrous membrane was designed as a separator for aqueous zinc-ion batteries, which exhibited enhanced cycling stability and rate capability.
Article
Chemistry, Multidisciplinary
Jingxu Zheng et al.
Summary: Control of crystallography in metal electrodeposit films is crucial for long battery lifetimes, with the ARB process demonstrating significant improvements in crystallographic uniformity and plating/stripping performance. This concept can potentially be applied to various metal chemistries to develop highly reversible thin metal anodes, highlighting opportunities for future battery advancements.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Zhao Cai et al.
Summary: The critical parameters governing the electrodeposition stability of metallic Zn electrode have been uncovered, and steady-state Zn metal plating/stripping has been achieved. Furthermore, long-term cycling-stable Zn metal electrode has been realized under certain conditions.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Multidisciplinary Sciences
Giorgia Zampardi et al.
Summary: Aqueous zinc-ion batteries have potential as stationary storage systems for power-grid applications, but certain challenges need to be addressed and experimental practices need to be aligned with industrial working conditions to promote their commercialization.
NATURE COMMUNICATIONS
(2022)
Review
Nanoscience & Nanotechnology
Bin Li et al.
Summary: This article reviews the role of interfacial engineering in inhibiting the growth of Zn dendrites and the occurrence of side reactions. Researchers have regulated the deposition behavior of Zn ions through surface modification and the addition of electrolyte additives to achieve uniform Zn nucleation and flat Zn deposition, improving the cycling stability of Zn anodes.
NANO-MICRO LETTERS
(2022)
Article
Chemistry, Multidisciplinary
Yu Hao et al.
Summary: The gel electrolyte with multifunctional charged groups can effectively address the dendrite formation issue and consecutive side reactions in aqueous Zn batteries. The charged groups can texture the Zn2+ nucleation and deposition plane, inducing uniform growth of Zn metal and eliminating side reactions for high rate performance. This design of gel electrolyte shows promise for safe, flexible, and wearable energy storage devices.
Article
Multidisciplinary Sciences
Jindi Wang et al.
Summary: In this work, conformal growth of zinc hydroxide sulfate (ZHS) was achieved on Zn metal foil through a thermal annealing process, improving Zn2+ conductivity and forming a beneficial SEI layer on the Zn electrode. The achieved Zn electrode exhibited remarkable cycling stability and high efficiency, showcasing potential for practical application in energy storage systems.
Article
Chemistry, Physical
Jiaxian Zheng et al.
Summary: This study demonstrates that a TiN protective coating with preferential (200) orientation can effectively suppress Zn dendritic growth and side reactions, while regulating the growth pattern of the byproduct. This provides a new pathway for achieving high-efficiency reversible Zn plating/stripping.
ACS ENERGY LETTERS
(2022)
Article
Chemistry, Physical
Sijun Wang et al.
Summary: In this study, an organic-inorganic dual protection layer was built to address the issues of zinc dendrite growth and side reactions in AZIBs, resulting in improved cycling stability and lifespan of the batteries. This work paves the way for future development of AZIBs.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Lin Hong et al.
Summary: The formation of Zn4SO4(OH)6middot5H2O byproducts is closely related to the direct contact between the Zn electrode and SO42-/H2O. A cation-exchange membrane of PFSA coated on the Zn surface can regulate the Zn plating/stripping behavior, resulting in a highly reversible process with corrosion-free and dendrite-free behavior.
Article
Chemistry, Multidisciplinary
Kaiwen Qi et al.
Summary: This study enhances the stability of aqueous zinc-ion batteries (AZIBs) by constructing an enamel-like layer of nanohydroxyapatite (Ca-5(PO4)(3)(OH), nano-HAP) on the zinc anode. The layer not only guides zinc deposition and suppresses dendrite growth but also regulates the pH of the electrolyte. The stable metal electrodes developed through this method show great potential in practical applications.
Article
Chemistry, Multidisciplinary
Huaming Yu et al.
Summary: A highly antiwater interface layer is designed on Zn metal to address the corrosion and dendrite growth problems in aqueous Zn metal batteries. The experimental results show that this interface layer can prevent water damage to the Zn anode surface and facilitate fast zinc-ion adsorption and migration. The modified anode exhibits long cycling lifespan and low polarization voltage, demonstrating its potential for high-performance aqueous zinc-metal batteries.
Article
Chemistry, Multidisciplinary
Shengda D. Pu et al.
Summary: By using single-crystal zinc metal anodes, dendrite formation in zinc batteries can be effectively suppressed, enabling high-capacity planar zinc electrodeposition. Such dendrite-free electrode exhibits excellent electrochemical performance and maintains its integrity even after prolonged cycling.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Min Yang et al.
Summary: This study presents a binary hydrate-melt electrolyte as a solution to improve the cycling performance of zinc-ion batteries with metal zinc anodes. By adjusting the solvation structure of zinc ions, the side reactions on the anodes can be effectively suppressed, leading to higher coulombic efficiency. Experimental results demonstrate that the use of this electrolyte can achieve better cycling performance.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Jiahui Zhou et al.
Summary: Metallic zinc is considered an attractive anode material for aqueous energy storage devices due to its low cost, high capacity, and environmentally friendly features. However, dendritic growth and severe side reactions have restricted the development of zinc-metal anodes. In this study, a thermal infusion strategy was used to create a stable composite zinc-based anode. The results showed that this new structure effectively inhibits dendritic growth and passivation, enabling long-cycling life and high capacity retention.
ADVANCED MATERIALS
(2022)
Review
Chemistry, Physical
Ahmad Naveed et al.
Summary: Aqueous rechargeable Zn batteries have significant potential for energy storage applications, but face challenges with Zn anode that require surface engineering for stabilization. Surface engineering of Zn anode through artificial protective layers/coatings is an emerging and promising research direction.
JOURNAL OF POWER SOURCES
(2022)
Article
Chemistry, Physical
Chenggang Wang et al.
Summary: This article investigates the application of MoO3 material in rechargeable proton batteries and suppresses material dissolution by coating a ultrathin TiO2 shell on MoO3 nanorods. The experimental results show that MoO3@TiO2 exhibits excellent electrochemical performance at high rates and high mass loadings.
ADVANCED ENERGY MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Chuyuan Lin et al.
Summary: Ammonium acetate is used as an electrolyte additive to enhance the performance of aqueous zinc-ion batteries. It can adsorb on the zinc electrode surface and regulate the electrolyte pH, effectively suppressing side reactions and dendrite formation. The batteries with ammonium acetate exhibit stable operation and long lifespan at high current densities.
Article
Chemistry, Physical
Yi Liu et al.
Summary: By adding phosphoric acid to zinc electrolyte, the growth of zinc electrode can be made more uniform and reversible. This approach not only improves the cycling stability and rate capability of zinc-MnO2 batteries, but also makes aqueous zinc metal batteries competitive for practical applications.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Pinji Wang et al.
Summary: Multifunctional interfacial engineering on the Zn anode, through the spontaneous construction of a carbonyl-containing layer (Zn@ZCO), effectively suppresses dendrite growth, hydrogen evolution, and sluggish kinetics associated with Zn deposition. The Zn@ZCO anode exhibits a long cycling lifespan, dendrite-free surface, and excellent rate performance in aqueous zinc-ion batteries.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Kang Zhao et al.
Summary: This study demonstrates the potential of cyclodextrins (CDs) as electrolyte additives for rechargeable Zn batteries. The addition of alpha-CD improves the stability and kinetics of Zn plating and stripping by adsorbing on the Zn surface and suppressing water-induced side reactions. This finding provides insight into the use of supramolecular macrocycles for enhancing the performance of aqueous battery chemistry.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2022)
Article
Chemistry, Physical
Tian Wang et al.
Summary: This review provides an overview of the effective strategies and recent progress in achieving planar and dendrite-free zinc deposition in aqueous zinc metal batteries, and elucidates the influence of crystal orientation on zinc metal deposition behavior.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Physical
Meijia Qiu et al.
Summary: This article introduces a method to improve the long-term reversible plating/stripping of zinc anodes by introducing sorbitol as an additive. The research found that sorbitol can promote the preferred (002) orientation growth on the zinc anode surface, which facilitates stable inversion of the zinc deposition. Additionally, sorbitol modulates the solvation structure of Zn2+ and reduces common side reactions. Experimental results demonstrate the excellent stability of the zinc anode in zinc-zinc symmetric cells and other types of full cells.
ENERGY STORAGE MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Rui Wang et al.
Summary: Rechargeable aqueous zinc-ion batteries are considered ideal for large-scale energy storage due to their high safety, eco-friendliness, and low cost. However, the growth of dendrites and parasitic reactions at the anode-electrolyte interface hinder their practical realization. This study proposes that the electrochemical performance of the Zn-metal anode can be improved by using a 3D ZnTe semiconductor substrate, which leads to long cycle life and small voltage hysteresis.
ADVANCED FUNCTIONAL MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Meijia Qiu et al.
Summary: By introducing beta-cyclodextrin as an anion-trap agent in zinc batteries, the deposition and migration behaviors of zinc anodes are improved, leading to enhanced stability and capacity.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Engineering, Environmental
Xuri Wang et al.
Summary: A nonstoichiometric Na-0.3(NH4)(0.6)V4O10 center dot 0.4H(2)O(NVO-Na) cathode material was developed for aqueous zinc ion batteries (AZIBs), which enhances the diffusion kinetic and keeps the layer structure stable. The NVO-Na cathode exhibits impressive specific capacity and excellent capacity retention, showing promise for high-performance AZIBs cathode materials.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Multidisciplinary
Qiu Zhang et al.
Summary: By introducing halogen ions, the challenges of dendritic growth and hydrogen evolution reaction in zinc metal batteries can be overcome. Designing an electrolyte composed of zinc acetate and ammonium halide can form a halogenated Zn2+ solvation structure, achieving high coulombic efficiency and suppressing dendritic growth.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2022)
Article
Chemistry, Physical
Zibo Chen et al.
Summary: This study developed a grain-size-assisted cold-rolling method to reshape and unify commercial Zn foils into strong (002) textured Zn. The resulting (002) textured Zn foils showed better resistance to side reactions and dendrite growth as aqueous metal anodes. The strategy demonstrated in this work provides a scalable pathway toward highly reversible Zn anodes for aqueous zinc-ion energy storage devices.
ACS ENERGY LETTERS
(2022)
Article
Chemistry, Multidisciplinary
Huili Peng et al.
Summary: By intercalating n-butylamine into monodisperse hexagonal nanoplates of alpha-ZrP, the compatibility with hydrophobic polymers is improved, resulting in a dense and robust artificial layer on the zinc anode. This reduces direct exposure to electrolytes and suppresses side reactions, leading to improved electrochemical performance.
ENERGY & ENVIRONMENTAL SCIENCE
(2022)
Article
Chemistry, Multidisciplinary
Xianzhong Yang et al.
Summary: The study successfully inhibited Zn dendrite formation and side reactions by depositing a ZnSe film on commercial Zn foil, leading to improved cyclic stability of the battery and providing feasibility for commercial applications.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Du Yuan et al.
Summary: Texturing zinc has been demonstrated as an effective approach to address the issue of zinc dendrite formation, showing highly reversible stripping/plating at high current density without dendrite characteristics. The development of anion-induced zinc texturing provides a pathway to explore zinc chemistry and advance aqueous rechargeable batteries.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Review
Chemistry, Multidisciplinary
Yaosen Tian et al.
Summary: The significant advancements in performance and cost of lithium-ion batteries have made them the preferred technology for electrical energy storage, but they may not meet all the requirements for large-scale applications. Hence, exploration of beyond lithium-ion technologies including sodium-ion batteries, potassium-ion batteries, all-solid-state batteries, and multivalent batteries is accelerating.
Article
Chemistry, Multidisciplinary
Yang Yang et al.
Summary: The study successfully developed a Zn@ZnF2 electrode with a multi-functional protective layer by designing a 3D interconnected ZnF2 matrix on the surface of Zn foil. This electrode exhibits stable zinc deposition kinetics and good plating/stripping reversibility, showing potential for practical application in various battery systems.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Xiaohui Zeng et al.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Longtao Ma et al.
Summary: By using a ZnF2 solid ion conductor to isolate Zn metal, the hydrogen evolution in Zn metal batteries has been significantly reduced, leading to improved performance and stability of the batteries.
ADVANCED MATERIALS
(2021)
Article
Multidisciplinary Sciences
Zedong Zhao et al.
Summary: This study developed a fluorinated covalent organic framework film as a protective layer for aqueous zinc anode battery, aiming to reduce zinc dendrite growth and electrolyte corrosion, achieve horizontally arranged zinc deposition, and improve stability and cycling performance.
NATURE COMMUNICATIONS
(2021)
Article
Chemistry, Multidisciplinary
Miao Zhou et al.
Summary: This study investigates a novel zinc anode with a surface-preferred (002) crystal plane, revealing its characteristics of fewer dendrites, no by-products, and weak hydrogen evolution. This leads to improved stability and reversibility of the battery system.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Xia Wang et al.
Summary: Acid etching can improve the electrodeposition quality and corrosion resistance of zinc metal anodes, enhancing Zn2+ ion kinetics; phosphoric acid etching yields the most compact layer; the zinc phosphate@Zn electrode shows stable cycling and fast kinetics in zinc metal batteries.
ADVANCED FUNCTIONAL MATERIALS
(2021)
Article
Chemistry, Multidisciplinary
Yuzhu Chu et al.
Summary: The in situ construction of a composite SEI mainly composed of Zn-3(PO4)(2) and ZnF2 (ZCS) effectively suppresses Zn dendrite growth and accelerates Zn2+ transference and deposition kinetics in aqueous Zn-ion batteries. By taking advantage of the instability of KPF6 in an aqueous environment, an in situ ZCS is successfully built on the Zn anode through a PF6- anion-induced chemical strategy, showing enhanced reversibility and excellent electrochemical performance. This work not only paves a new way for designing a desirable SEI on the Zn anode, but also may guide the interface engineering of other systems to overcome intrinsic defects in constructing favorable interphases.
ENERGY & ENVIRONMENTAL SCIENCE
(2021)
Review
Chemistry, Multidisciplinary
Qi Zhang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2020)
Article
Chemistry, Multidisciplinary
Junnan Hao et al.
ADVANCED MATERIALS
(2020)
Article
Multidisciplinary Sciences
Jingxu Zheng et al.
Article
Multidisciplinary Sciences
Sunghwan Jin et al.
Article
Energy & Fuels
Huilin Pan et al.
