☆ 4.8 Article

Flexible Electronic Systems via Electrohydrodynamic Jet Printing: A MnSe@rGO Cathode for Aqueous Zinc-Ion Batteries

ACS NANO (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Boosting fast interfacial Li (+) metal batteries via ultrathin Al buffer layer

Shengnan Zhang et al.

Summary: An ultrathin Al film is deposited on the surface of Li(1.5)AI(0.5)Ge(0.5)P(3)O(12) solid state electrolytes (SSEs) by magnetron sputtering, forming a LiAl buffer layer to inhibit side reactions and provide a uniform interfacial electric field. Density functional theory calculations show that the LiAl alloy surface promotes lithium diffusion, inhibiting the formation of lithium dendrites. Assembled all solid state lithium metal batteries with LiFePO4 cathode exhibit improved cycle stability and rate performance.

NANO RESEARCH (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Elastic Migration of Magnesium Cations in alpha-Manganese Dioxide Tunnels Locally Tuned by Aluminium Substitution

Yaxi Ding et al.

Summary: This study demonstrates the design of a high-performance cathode for aqueous magnesium ion energy storage by doping Al3+ cations into α-MnO2 materials. The introduction of Al3+ cations adjusts the local chemical environment and precisely regulates the diffusion behavior of inserted Mg2+ cations. The enhanced elastic migration of Mg2+ cations driven by strengthened electrostatic attraction leads to lower diffusion energy barrier, improved reaction kinetics, and adaptive volume expansion.

ADVANCED FUNCTIONAL MATERIALS (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Is Soft Carbon a More Suitable Match for SiOx in Li-Ion Battery Anodes?

Qing Sun et al.

Summary: Silicon oxide (SiOx), with high-capacity and superior cycling stability, shows promise as an anode material for next-generation Li-ion batteries. However, the limited cycling durability of SiOx/graphite composites hinders large-scale applications.

SMALL (2023)

Add to Collection

Article Physics, Applied

Carbon Microstructure Dependent Li‐Ion Storage Behaviors in SiOx/C Anodes (Small 25/2023)

Qing Sun et al.

Small (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Interfacial Chemistry Modulation via Amphoteric Glycine for a Highly Reversible Zinc Anode

Yu Liu et al.

Summary: In this study, glycine is used as an additive to modulate the solvation shell structure and enhance the interfacial stability of aqueous Zn ion batteries. The results show that the cycle life of the symmetrical cells reaches over 3200 h in glycine-containing electrolytes, and the Zn//NVO full cell exhibits exceptional cycling stability for 3000 cycles at 5 A g-1. Therefore, the proposed strategy for interfacial chemistry modulation, represented by glycine, has considerable potential in promoting the commercialization progress of aqueous batteries.

ACS NANO (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Patterning with Aligned Electrospun Nanofibers by Electrostatic Deflection of Fast Jets

Ievgenii Liashenko et al.

Summary: Electrospun micro and nanofibers have numerous applications, but their printing potential is limited by a lack of control over fiber organization and distribution. This study presents a new method in which electrospun jets can be electrostatically deflected and printed as aligned fibers, allowing precise control over track width, fiber alignment, and internal structure.

ADVANCED ENGINEERING MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Puffing Up Hollow Carbon Nanofibers with High-Energy Metal-Organic Frameworks for Capacitive-Dominated Potassium-Ion Storage

Yingxiao Wu et al.

Summary: This study introduces nitrogen and phosphorous co-doped hollow carbon nanofibers (PNCNFs) derived from high-energy metal-organic frameworks (MOFs) with ultra-high nitrogen content and more reactive nitrogen sites, as well as a highly open structure providing sufficient edge sites, leading to excellent potassium ion storage performance.

SMALL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Focusing on the Subsequent Coulombic Efficiencies of SiOx: Initial High-Temperature Charge after Over-Capacity Prelithiation for High-Efficiency SiOx-Based Full-Cell Battery

Qing Sun et al.

Summary: SiOx-based anode materials are promising for high capacity and acceptable volume change, but suffer from low Coulombic efficiency. This work proposes a strategy of high-temperature initial charge and overcapacity prelithiation to improve the Coulombic efficiency and capacity retention of SiOx-based batteries.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Reversible Zn Metal Anodes Enabled by Freestanding, Lightweight, and Zincophilic MXene/Nanoporous Oxide Heterostructure Engineered Separator for Flexible Zn-MnO2 Batteries

Yongling An et al.

Summary: A novel MXene/nanoporous oxide heterostructure engineered separator is designed to stabilize zinc metal anodes and solve the dendrite issue. The zincophilic properties of the separator regulate zinc deposition and suppress side reactions, achieving dendrite-free zinc anodes with stable cyclability.

ACS NANO (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Smart Textiles for Healthcare and Sustainability

Trinny Tat et al.

Summary: Smart textiles research focuses on healthcare and sustainability objectives using innovative technologies. Current studies mainly concentrate on personalized healthcare and energy harvesting, with future advancements expected to revolutionize healthcare and sustainability fields.

ACS NANO (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A 1.3-micrometre-thick elastic conductor for seamless on-skin and implantable sensors

Zhi Jiang et al.

Summary: Polydimethylsiloxane-gold conductors with controlled microcrack morphology in the gold film, approximately 1.3 μm thick, have been developed. These conductors can stretch up to 300% and maintain high conductivity. They can be used to create breathable and water-resistant on-skin electrodes, pressure sensors, and implantable nerve electrodes.

NATURE ELECTRONICS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Understanding intercalation chemistry for sustainable aqueous zinc-manganese dioxide batteries

Yifei Yuan et al.

Summary: Rechargeable aqueous Zn-MnO2 technology combines favorable sustainability characteristics, including safety, cost, and environmental compatibility. Advanced characterizations and theoretical calculations provide fresh insight into the charge storage mechanism, closing an ongoing debate and suggesting ways forward.

NATURE SUSTAINABILITY (2022)

Add to Collection

Article Chemistry, Physical

Prussian blue analogs cathodes for aqueous zinc ion batteries

Yuanxia Li et al.

Summary: With the development of cathode materials like manganese-based, vanadium-based, organic, and Prussian blue analog (PBAs), attention has shifted to PBAs as promising cathodes for high-performance AZIBs due to their high working voltage, tunable chemical composition and microstructure, open 3D frameworks, low cost, and ease of synthesis. This review provides insights into the structure characteristics and synthesis control of PBAs, as well as an overview of recent developments in their application as cathodes for AZIBs. The key challenges and future opportunities in this rapidly developing field are also discussed.

MATERIALS TODAY ENERGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Insights into the Potassium Ion Storage Behavior and Phase Evolution of a Tailored Yolk-Shell SnSe@C Anode

Qing Sun et al.

Summary: This study proposes a facile structural engineering strategy for encapsulating SnSe in a carbon shell, which improves the electrochemical performance of potassium-ion battery anode materials. The heteroatomic doped carbon shows a favorable affinity towards potassium ions and potassiation products, enhancing the rate performance and capacity retention. The in situ X-ray diffraction characterization reveals the phase evolution of the SnSe@C electrode during the potassiation/depotassiation process.

SMALL (2022)

Add to Collection

Article Chemistry, Physical

Recent status and future perspectives of 2D MXene for micro-supercapacitors and micro-batteries

Yuanyuan Zhu et al.

Summary: This review critically examines the design and microfabrication strategies of MXene-based microelectrodes for microscale energy storage devices (MESDs). Advantages and limitations of various microfabrication techniques are analyzed, and the performance metrics achieved by different methods are compared. Unique instances of device integration and related applications are discussed.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Boosting fast interfacial Li+ transport in solid-state Li metal batteries via ultrathin Al buffer layer

Shengnan Zhang et al.

Summary: Superionic conductor LAGP has been widely studied for its high ionic conductivity and stability. However, its application is limited by lithium dendrites and interface instability. By depositing an ultrathin Al film on the surface of LAGP through magnetron sputtering, an Al-LAGP material is formed. In-situ alloying reaction creates a LiAl buffer layer, inhibiting undesired reactions and promoting uniform distribution of the electric field at the interface. Density functional theory calculations show that the LiAl alloy surface facilitates lithium atom diffusion and inhibits dendrite formation. Experimental results demonstrate that Li/Al-LAGP-Al/Li symmetric cells exhibit low resistance and long lifespan, and assembled all solid state lithium metal batteries show improved cycle stability and rate performance.

NANO RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

CNT@MnO2 composite ink toward a flexible 3D printed micro-zinc-ion battery

Yujin Ren et al.

Summary: Flexible zinc-ion batteries have rapidly developed in recent years as an essential branch of flexible energy storage devices. This study successfully utilized 3D printing technology to create flexible aqueous micro-ZIBs, demonstrating their stability and potential.

CARBON ENERGY (2022)

Add to Collection

Article Energy & Fuels

Potassium Ions Regulated the Disproportionation of Silicon Monoxide Boosting Its Performance for Lithium-Ion Battery Anodes

Jing Li et al.

Summary: In this study, potassium ions were introduced to promote the crystalline transition in silicon monoxide, leading to improved cycling stability and initial Coulombic efficiency. Additionally, increasing the heating temperature was found to enhance the performance of the silicon monoxide anode.

ENERGY & FUELS (2021)

Add to Collection

Article Chemistry, Physical

High Performance Printed AgO-Zn Rechargeable Battery for Flexible Electronics

Lu Yin et al.

Summary: The study developed printable polymer-based flexible batteries with features such as flexibility, rechargeability, and high capacity, demonstrating superior performance through detailed testing and analysis. These batteries are suitable for various electronic devices and have significant implications for the future development of high-performance flexible batteries.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Multitasking MXene Inks Enable High-Performance Printable Microelectrochemical Energy Storage Devices for All-Flexible Self-Powered Integrated Systems

Shuanghao Zheng et al.

Summary: This study discusses the application of multitasking aqueous printable MXene inks in the fabrication of micro-supercapacitors and lithium-ion batteries, showing great potential for high-performance electronic devices on various substrates.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrications of High-Performance Planar Zinc-Ion Microbatteries by Engraved Soft Templates

Kang Jiang et al.

Summary: The study introduces a simple and powerful strategy to fabricate flexible ZIMBs using tailored soft templates, allowing for the design of ZIMBs with arbitrary shapes and placement on various substrates.

SMALL (2021)

Add to Collection

Review Chemistry, Applied

From aqueous Zn-ion battery to Zn-MnO2 flow battery: A brief story

Tong Xue et al.

Summary: AZIB is an attractive technology due to its low cost, high safety, and eco-friendliness. Recent studies have shown significant performance enhancement through revamping of the electrochemistry and redesigning of the electrolyte and interface. The Zn-MnO2 electrolytic mechanism shows great promise for large-scale static energy storage.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Chemistry, Physical

Dissolution-Redeposition Mechanism of the MnO2 Cathode in Aqueous Zinc-Ion Batteries

Tzu-Ho Wu et al.

Summary: A dissolution-redeposition reaction mechanism of the MnO2 cathode in rechargeable aqueous zinc-ion batteries is visualized using in situ Raman microscopy. This study shows the important role of dissolved Mn2+ in battery chemistry and the redeposition of Mn2+ forming species with high Zn-content. In addition, in operando observation of Jahn-Teller distortion of manganese and its correlation with Mn-O bond length change is achieved for the first time using in situ Raman microscopy.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

A graphene oxide coated sulfide-based solid electrolyte for dendrite-free lithium metal batteries

Jianwei Li et al.

Summary: The study developed a graphene oxide-coated solid electrolyte Li7P3S11 particles for stable and efficient all-solid-state battery application. The design partially isolates the solid electrolyte from lithium metal and increases cycling stability, providing a simple method for dendrite-free and highly stable sulfide-based all-solid-state battery applications.

CARBON (2021)

Add to Collection

Review Chemistry, Applied

Recent advances and perspectives on vanadium- and manganese-based cathode materials for aqueous zinc ion batteries

Na Liu et al.

Summary: The growing demand for energy storage has prompted researchers to explore advanced batteries, with aqueous zinc ion batteries (ZIBs) emerging as a promising option. While rechargeable ZIBs offer high safety, low cost, environmental friendliness, and competitive performance, the development of suitable zinc ion intercalation-type cathode materials remains a challenge. Vanadium-based and manganese-based compounds are the most advanced and widely used rechargeable ZIBs electrodes.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Article Energy & Fuels

Gravure-Printed Conversion/Alloying Anodes for Lithium-Ion Batteries

Maria Montanino et al.

Summary: This study successfully demonstrates the use of gravure printing to prepare high-performance conversion/alloying anodes for lithium-ion batteries, achieving desired mass loading through a multilayer approach and showing comparable results to commonly used tape-casting methods. The high-quality gravure-printed layers exhibit high homogeneity, reproducibility in electrochemical performance, reaching a long cycle life of up to 400 cycles. The results are attributed in part to the ink preparation method involving ball-milling mix of powders for disaggregation and homogenization of starting materials, showcasing the potential of gravure printing in industrial manufacturing of printed batteries and as a useful tool for material research.

ENERGY TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ultrafast electrohydrodynamic 3D printing with in situ jet speed monitoring

Ievgenii Liashenko et al.

Summary: Additive manufacturing by near-field electrospinning involves continuous deposition of nanofibers on a substrate, offering high resolution and printing speed. By utilizing inexpensive optical equipment, jet speed during printing can be determined in situ, enabling better control of the printing process.

MATERIALS & DESIGN (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Highly stable and printable Ag NWs/GO/PVP composite ink for flexible electronics

Shang Wang et al.

Summary: A high-dispersibility Ag NW/GO/PVP composite ink has been synthesized in this study, improving the dispersibility and connection of silver nanowires in water to produce a flexible electrode with high reliability. The use of graphene oxide enhances the thermal stability of Ag NWs, showing potential for applications in high-reliability flexible electronics.

FLEXIBLE AND PRINTED ELECTRONICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Controlled synthesis and Raman study of a 2D antiferromagnetic P-type semiconductor: α-MnSe

Ningning Li et al.

Summary: The study successfully synthesized ultrathin non-van der Waals antiferromagnetic α-MnSe single crystals and demonstrated temperature-dependent Raman spectral changes, confirming its antiferromagnetic spin-ordering below 160K. Additionally, valuable information about the material properties and photoconducting performance was obtained through theoretical simulations and experimental observations.

NANOSCALE (2021)

Add to Collection

Article Chemistry, Physical

Hydrothermally synthesized MnSe as high cycle stability anode material for lithium-ion battery

Haichao Tang et al.

IONICS (2020)

Add to Collection

Article Multidisciplinary Sciences

Scalable fabrication of printed Zn//MnO2 planar micro-batteries with high volumetric energy density and exceptional safety

Xiao Wang et al.

NATIONAL SCIENCE REVIEW (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Achieving high energy density and high power density with pseudocapacitive materials

Christopher Choi et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

H+-Insertion Boosted α-MnO2 for an Aqueous Zn-Ion Battery

Xu Gao et al.

SMALL (2020)

Add to Collection

Article Multidisciplinary Sciences

Ultrafast 3D printing with submicrometer features using electrostatic jet deflection

Ievgenii Liashenko et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Charging activation and desulfurization of MnS unlock the active sites and electrochemical reactivity for Zn-ion batteries

Xiujuan Chen et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Selenium-Doped Carbon Quantum Dots Act as Broad-Spectrum Antioxidants for Acute Kidney Injury Management

Zachary T. Rosenkrans et al.

ADVANCED SCIENCE (2020)

Add to Collection

Review Multidisciplinary Sciences

Roadmap for advanced aqueous batteries: From design of materials to applications

Dongliang Chao et al.

SCIENCE ADVANCES (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MnSe embedded in carbon nanofibers as advanced anode material for sodium ion batteries

Le Hu et al.

NANOTECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Recent advances and future challenges in printed batteries

C. M. Costa et al.

ENERGY STORAGE MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Structural Engineering of SnS2Encapsulated in Carbon Nanoboxes for High-Performance Sodium/Potassium-Ion Batteries Anodes

Qing Sun et al.

SMALL (2020)

Add to Collection

Article Multidisciplinary Sciences

Modulating electrolyte structure for ultralow temperature aqueous zinc batteries

Qiu Zhang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Printable Ink Design towards Customizable Miniaturized Energy Storage Devices

Jingxin Zhao et al.

ACS MATERIALS LETTERS (2020)

Add to Collection

Review Electrochemistry

Recent Advancements and Perspective of High-Performance Printed Power Sources with Multiple Form Factors

Xiaoyu Shi et al.

ELECTROCHEMICAL ENERGY REVIEWS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Bio-Integrated Wearable Systems: A Comprehensive Review

Tyler R. Ray et al.

CHEMICAL REVIEWS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

General Interfacial Self-Assembly Engineering for Patterning Two-Dimensional Polymers with Cylindrical Mesopores on Graphene

Hao Tian et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Article Multidisciplinary Sciences

Multi-metal electrohydrodynamic redox 3D printing at the submicron scale

Alain Reiser et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Electrochemistry

Porous α-MnSe Microsphere Cathode Material for High-Performance Aluminum Batteries

Yiqun Du et al.

CHEMELECTROCHEM (2019)

Add to Collection

Article Chemistry, Physical

Nitrogen-doped carbon derived from pre-oxidized pitch for surface dominated potassium-ion storage

Qing Sun et al.

CARBON (2019)

Add to Collection

Article Chemistry, Physical

Reduced graphene oxide/SnO2@Au heterostructure for enhanced ammonia gas sensing

Ruiqin Peng et al.

CHEMICAL PHYSICS LETTERS (2019)

Add to Collection

Article Chemistry, Physical

Solid Electrolyte Interphase on Native Oxide-Terminated Silicon Anodes for Li-Ion Batteries

Chuntian Cao et al.

JOULE (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Wearable Fabrics with Self-Branched Bimetallic Layered Double Hydroxide Coaxial Nanostructures for Hybrid Supercapacitors

Goli Nagaraju et al.

ACS NANO (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Investigation of zinc ion storage of transition metal oxides, sulfides, and borides in zinc ion battery systems

Wenbao Liu et al.

CHEMICAL COMMUNICATIONS (2017)

Add to Collection

Article Chemistry, Physical

Thorough XPS analyses on overlithiated manganese spinel cycled around the 3V plateau

R. Grissa et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Nanoscience & Nanotechnology

A Prussian Blue/Zinc Secondary Battery with a Bio-Ionic Liquid-Water Mixture as Electrolyte

Zhen Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Multidisciplinary

All-inkjet-printed, solid-state flexible supercapacitors on paper

Keun-Ho Choi et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Synthesis of High-Quality α-MnSe Nanostructures with Superior Lithium Storage Properties

Na Li et al.

INORGANIC CHEMISTRY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Direct Alignment and Patterning of Silver Nanowires by Electrohydrodynamic Jet Printing

Hyungdong Lee et al.

SMALL (2014)

Add to Collection

Article Multidisciplinary Sciences

An electrochemical system for efficiently harvesting low-grade heat energy

Seok Woo Lee et al.

NATURE COMMUNICATIONS (2014)

Add to Collection

Article Chemistry, Physical

A high-energy-density micro supercapacitor of asymmetric MnO2-carbon configuration by using micro-fabrication technologies

Caiwei Shen et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Zinc Chalcogenolate Complexes as Precursors to ZnE and Mn/ZnE (E = S, Se) Clusters

Chhatra B. Khadka et al.

INORGANIC CHEMISTRY (2012)

Add to Collection

Article Chemistry, Physical

A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu

Stefan Grimme et al.

JOURNAL OF CHEMICAL PHYSICS (2010)

Add to Collection

Article Chemistry, Physical

High-resolution electrohydrodynamic jet printing

Jang-Ung Park et al.

NATURE MATERIALS (2007)

Add to Collection

Article Chemistry, Physical

Manganese selenide thin films as anode material for lithium-ion batteries

Ming-Zhe Xue et al.

SOLID STATE IONICS (2007)

Add to Collection

Review Multidisciplinary Sciences

Spintronics:: A spin-based electronics vision for the future

SA Wolf et al.

SCIENCE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.