☆ 4.8 Article

Asymmetric Non-Fullerene Acceptor Derivatives Incorporated Ternary Organic Solar Cells

ACS APPLIED MATERIALS & INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Conformation Flipping of Asymmetric Nonfullerene Acceptors Enabling High-Performance Organic Solar Cells with 77% Fill Factors

Jintao Zhu et al.

Summary: Considerable progress has been made in high-performance organic solar cells (OSCs) with the development of nonfullerene acceptors (NFAs). A novel asymmetric thiophene[3,2-b] pyrrole (TP)-based NFA, PTBTT-4F, has been designed and synthesized, which improves the energy levels and aggregation of NFAs. The asymmetric PTBTT-4F fabricated OSCs show higher open-circuit voltage, short-circuit current, and fill factor compared to symmetrical PTBTP-4F devices, leading to an outstanding power conversion efficiency of 14.49%.

SOLAR RRL (2023)

Add to Collection

Article Chemistry, Multidisciplinary

Enhanced Charge Transport and Broad Absorption Enabling Record 18.13% Efficiency of PM6:Y6 Based Ternary Organic Photovoltaics with a High Fill Factor Over 80%

Yihan Zeng et al.

Summary: Ternary architecture is an efficient strategy to improve the power conversion efficiency of single-junction organic solar cells. In this study, a ternary device with a power conversion efficiency of 18.13% and a fill factor of 80.10% was reported. The advantages of the designed ternary heterojunction are the complementary light absorption and the matched interfacial electronic structures, as well as the optimized microstructure and enhanced charge transport.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Polymer Solar Cells with 18.74% Efficiency: From Bulk Heterojunction to Interdigitated Bulk Heterojunction

Xiaopeng Xu et al.

Summary: By utilizing a sequential solution processing method, a more suitable IHJ nanostructure for organic solar cells has been achieved, leading to an increased power conversion efficiency. The IHJ structure, compared to the BHJ structure, can efficiently dissociate excitons, reduce charge recombination, and facilitate the transport of free electrons and holes through more straightforward pathways, ultimately enhancing performance.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Novel Oligomer Enables Green Solvent Processed 17.5% Ternary Organic Solar Cells: Synergistic Energy Loss Reduction and Morphology Fine-Tuning

Hao Xia et al.

Summary: The study synthesized two novel oligomers as the third component in high-performance ternary organic solar cells, effectively suppressing non-radiative recombination and achieving ultra-high electroluminescence quantum efficiency and improved voltage; The oligomers also fine-tuned active layer morphology, exhibited synergistic effects, and significantly improved the performance of OSCs.

ADVANCED MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Over 17.7% efficiency ternary-blend organic solar cells with low energy-loss and good thickness-tolerance

Jinhua Gao et al.

Summary: In this study, ternary-blend organic solar cells (TOSCs) were fabricated with PM6:BTP-4F-12 as the host system and IT-M as the third component, yielding a power-conversion-efficiency (PCE) of 17.71% with excellent thickness tolerance. The third component IT-M played multiple roles in improving the performance of TOSCs by optimizing molecular arrangement and phase separation in the active layers, leading to enhanced short-circuit-current density, open-circuit-voltage, and fill-factor.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Review Chemistry, Physical

Recent progress in organic solar cells based on non-fullerene acceptors: materials to devices

Dou Luo et al.

Summary: Non-fullerene acceptors (NFAs) have recently gained prominence in organic solar cells (OSCs) due to their significantly higher power conversion efficiency compared to fullerene acceptors. NFAs have advantages such as facile synthesis methods and tunability of morphology and electronic properties. They can also modify the optical bandgap to broaden the absorption range.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Add to Collection

Review Energy & Fuels

Effect of Third Component on Efficiency and Stability in Ternary Organic Solar Cells: More than a Simple Superposition

Sungwoo Jung et al.

Summary: Ternary organic solar cells are high-performance solar cells that utilize multiple organic materials to enhance photon energy harvesting. In addition to studying complex energy/charge dynamics mechanisms and blend morphology, introducing a third component can also improve the efficiency and stability of ternary OSCs.

SOLAR RRL (2022)

Add to Collection

Article Engineering, Environmental

Sequential stacking of a thin BHJ layer acting as a morphology regulator for efficiency enhancement in non-fullerene ternary solar cells

Anisha Mohapatra et al.

Summary: In this study, a gradient ternary device architecture was developed to enhance the power conversion efficiency of alloyed solar cells. The architecture, featuring a vertically stratified morphology, established efficient charge extraction pathways and improved the photocurrent. The results showed that the gradient ternary structure achieved higher efficiency, with a 0.8% and 1.5% improvement compared to the ternary and binary structures respectively.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

A polymer donor with versatility for fabricating high-performance ternary organic photovoltaics

Bing-Huang Jiang et al.

Summary: This study investigates the optoelectronic properties of ternary organic photovoltaics by embedding the conjugated polymer PTO2 as the third component in PM6:Y6 and PM6:BTP-eC9 blends. The results show that PTO2 improves the light harvesting, blend morphologies, and energy losses of the devices, resulting in high power conversion efficiencies. Furthermore, the embedding of PTO2 enhances the long-term stability of the devices under different environmental conditions.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Organic solar cells based on non-fullerene acceptors containing thiophene [3,2-b] pyrrole

Jintao Zhu et al.

Summary: In this study, thiophene[3,2-b] pyrrole (TP) was utilized to create two new fused-ring conjugated nonfullerene acceptors (NFAs), which exhibited high LUMO energy levels and excellent film-forming properties. PTBTP-4F, with a stronger electron-withdrawing unit IC-2F, showed red-shifted absorptions compared to PTBTP-2F, resulting in slightly better performance when blended with donor PBDB-T.

ORGANIC ELECTRONICS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Backbone Engineering with Asymmetric Core to Finely Tune Phase Separation for High-Performance All-Small-Molecule Organic Solar Cells

Xunchang Wang et al.

Summary: By modifying the central core of small molecule donors, it is possible to delicately control phase separation and optimize photophysical processes, thereby improving device performance and advancing research in the ASM-OSC field.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A New Conjugated Polymer that Enables the Integration of Photovoltaic and Light-Emitting Functions in One Device

Ye Xu et al.

Summary: This study demonstrates the design and application of a new wide-bandgap polymer, PBQx-TCl, in photovoltaic and light-emitting devices. Devices fabricated with nonfullerene acceptors show high power conversion efficiency under various lighting conditions, showcasing the potential of PBQx-TCl-based devices in both photovoltaic and light-emitting functions.

ADVANCED MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

18.02% Efficiency ternary organic solar cells with a small-molecular donor third component

Xianjie Chen et al.

Summary: The ternary strategy using deep-lying HOMO energy level small molecule donor BPR-SCl in the PM6:BTP-eC9 host binary blend has successfully enhanced the power conversion efficiency of organic solar cells. The addition of BPR-SCl improved crystallinity of the photoactive layers and slightly reduced donor/acceptor phase separation scale, resulting in higher PCE, enhanced V-oc and J(sc) in the TOSCs. This study provides new insights into achieving high-performance TOSCs with the highest reported PCE using a small molecule donor as the third component.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Efficient Ternary Solar Cells with Efficient Forster Resonance Energy Transfer for Simultaneously Enhanced Photovoltaic Parameters

Liangang Xiao et al.

Summary: The introduction of a third component and non-fullerene acceptors in organic solar cells has significantly improved their photovoltaic performance, with ternary solar cells showing enhanced efficiency through the synergistic effects of IDTT-M and Y6.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Organic Solar Cells with 18% Efficiency Enabled by an Alloy Acceptor: A Two-in-One Strategy

Feng Liu et al.

Summary: A high-performance ternary solar cell utilizing a large-bandgap polymer donor and two structurally similar small-bandgap alloy acceptors is reported, achieving a power conversion efficiency of over 18%. By delicately regulating the energy levels of the alloy acceptor through varying the ratio of the two acceptors, more efficient hole transfer and exciton separation are achieved, contributing to reduced energy loss and better overall performance compared to single acceptor systems. Such a two-in-one alloy strategy shows promise in boosting the photovoltaic performance of devices.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

A Well-Mixed Phase Formed by Two Compatible Non-Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%

Yunhao Cai et al.

Summary: The ternary strategy of incorporating a third component into a binary blend has led to highly efficient organic solar cells with unprecedented power conversion efficiency values.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Using Two Compatible Donor Polymers Boosts the Efficiency of Ternary Organic Solar Cells to 17.7%

Wenhong Peng et al.

Summary: The use of ternary organic semiconducting blends is an effective strategy for enhancing the performance of polymer solar cells by increasing photocurrent and minimizing voltage losses. Challenges arise from the scarcity of suitable donors with deep HOMO levels, but a new donor polymer (PM7-Si) has been synthesized to address this issue, leading to significant improvements in efficiency, open-circuit voltage, and fill factor when incorporated into a binary system. These enhancements are attributed to improved carrier transport, stacking order, and morphology, highlighting the promise of using two polymer donors for high-performance ternary PSCs.

CHEMISTRY OF MATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Over 16.5% efficiency in ternary organic solar cells by adding an alloyed acceptor with energy transfer process

Zhenying Su et al.

Summary: Adding 5 wt% ITIC to the PM6:Y6 binary system successfully achieved a PCE of 16.6% for the PM6:Y6:ITIC ternary OSC, compared to 15.5% and 9.2% for the PM6:Y6 and PM6:ITIC binary OSCs. The enhanced photovoltaic performance of ternary OSCs resulted from extended absorption, enhanced fluorescence resonance energy transfer, balanced carrier transport, and reduced energy loss.

DYES AND PIGMENTS (2021)

Add to Collection

Article Chemistry, Physical

Boosting photovoltaic performance of ternary organic solar cells by integrating a multi-functional guest acceptor

Yuli Yin et al.

Summary: Constructing ternary structure with a new Y-T acceptor significantly enhances the efficiency and performance of organic solar cells by improving spectroscopic complementarity, enhancing exciton utilization, adjusting morphology, and promoting three-dimensional phase separation. This work provides insights into molecular design of nonfullerene acceptors and suggests guidelines for selecting guest components in ternary organic solar cells.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Reduced non-radiative charge recombination enables organic photovoltaic cell approaching 19% efficiency

Pengqing Bi et al.

Summary: Introducing HDO-4Cl increased the exciton diffusion length in the acceptor phase, reducing non-radiative charge recombination and improving photon utilization efficiency in PBDB-TF: eC9-based OPV cells. This led to achieving a high-efficiency OPV cell with outstanding power conversion efficiency, demonstrating the effectiveness of regulating exciton behaviors in reducing energy loss.

JOULE (2021)

Add to Collection

Article Chemistry, Physical

Small-molecular donor guest achieves rigid 18.5% and flexible 15.9% efficiency organic photovoltaic via fine-tuning microstructure morphology

Zhenyu Chen et al.

Summary: Incorporating highly ordered crystalline small molecules into host binary systems has been shown to significantly improve the photovoltaic performance of organic solar cells. By designing and synthesizing small molecular donors with similar chemical structures, it was found that the silicon-containing G19 exhibited a higher degree of order in the host system, resulting in improved power conversion efficiency.

JOULE (2021)

Add to Collection

Article Chemistry, Physical

Compatible Acceptors Mediate Morphology and Charge Generation, Transpration, Extraction, and Energy Loss in Efficient Ternary Polymer Solar Cells

Lingzhi Guo et al.

Summary: By incorporating a non-fullerene acceptor with lower electron affinity, narrower band gap, and improved propensity to crystallize as a third component in binary BHJ blends, ternary BHJ solar cells with higher efficiency were achieved. The optimized ternary BHJ films exhibited well-mixed acceptors phases and crystallite with favorable orientation, leading to more efficient exciton dissociation and improved charge transportation. The third component O-ITIC aided in reducing energy loss, increasing fill factor, and achieving the highest PCE of 16.5% in the optimized ternary devices.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

17% efficiency all-small-molecule organic solar cells enabled by nanoscale phase separation with a hierarchical branched structure

Jinzhao Qin et al.

Summary: The study found that the ternary bulk heterojunction layer with optimized composition can exhibit faster charge transfer processes, suppress geminate and non-geminate charge recombination, lower energetic disorder, and higher and more symmetric carrier mobilities. The nanoscale bicontinuous interpenetrating network with a hierarchical branched structure can be fully evolved in the BHJ layer with the optimal ternary composition.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Recent advances in PM6:Y6-based organic solar cells

Qing Guo et al.

Summary: The past two years have seen rapid progress in organic solar cells, driven by the newly developed nonfullerene acceptor Y6. In addition to the development of donor/acceptor materials, other factors have also contributed to the advancement of OSCs. This review focuses on the classic PM6:Y6 material combination and summarizes recent progress in OSCs.

MATERIALS CHEMISTRY FRONTIERS (2021)

Add to Collection

Article Chemistry, Physical

Improving quantum efficiency in organic solar cells with a small energetic driving force

Haiqin Liu et al.

Summary: The study revealed that a small energetic difference between the local excited state and the charge transfer state leads to low voltage loss, but results in a low short-circuit current density. By adding a polymer donor (PBDB-T) with similar chemical structure to PM7 in the ternary solar cells, the efficiency of the charge transfer state dissociation can be significantly improved, while maintaining the low voltage loss property of PM7:Y5.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Over 16.7% efficiency of ternary organic photovoltaics by employing extra PC71BM as morphology regulator

Jinhua Gao et al.

SCIENCE CHINA-CHEMISTRY (2020)

Add to Collection

Article Chemistry, Physical

Nonfullerene Ternary Organic Solar Cell with Effective Charge Transfer between Two Acceptors

Cheng Yang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Improving open-circuit voltage by a chlorinated polymer donor endows binary organic solar cells efficiencies over 17%

Ruijie Ma et al.

SCIENCE CHINA-CHEMISTRY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Asymmetric Acceptors with Fluorine and Chlorine Substitution for Organic Solar Cells toward 16.83% Efficiency

Tao Liu et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Over 15.7% Efficiency of Ternary Organic Solar Cells by Employing Two Compatible Acceptors with Similar LUMO Levels

Zhenghao Hu et al.

SMALL (2020)

Add to Collection

Article Chemistry, Physical

New Phase for Organic Solar Cell Research: Emergence of Y-Series Electron Acceptors and Their Perspectives

Shuixing Li et al.

ACS ENERGY LETTERS (2020)

Add to Collection

Article Chemistry, Physical

Achieving 17.4% Efficiency of Ternary Organic Photovoltaics with Two Well-Compatible Nonfullerene Acceptors for Minimizing Energy Loss

Xiaoling Ma et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Achieving Balanced Crystallization Kinetics of Donor and Acceptor by Sequential-Blade Coated Double Bulk Heterojunction Organic Solar Cells

Yilin Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Unifying Charge Generation, Recombination, and Extraction in Low-Offset Non-Fullerene Acceptor Organic Solar Cells

Akchheta Karki et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Review Optics

Recent Progress on Broadband Organic Photodetectors and their Applications

Zijin Zhao et al.

LASER & PHOTONICS REVIEWS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Metal-organic frameworks for solid-state electrolytes

Ruo Zhao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Over 17% efficiency ternary organic solar cells enabled by two non-fullerene acceptors working in an alloy-like model

Lingling Zhan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Eco-Compatible Solvent-Processed Organic Photovoltaic Cells with Over 16% Efficiency

Ling Hong et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Achieving Fast Charge Separation and Low Nonradiative Recombination Loss by Rational Fluorination for High-Efficiency Polymer Solar Cells

Chenkai Sun et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors

Jiali Song et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Jun Yuan et al.

JOULE (2019)

Add to Collection

Review Chemistry, Physical

Flexible and Semitransparent Organic Solar Cells

Yaowen Li et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Review Optics

Next-generation organic photovoltaics based on non-fullerene acceptors

Pei Cheng et al.

NATURE PHOTONICS (2018)

Add to Collection

Review Nanoscience & Nanotechnology

Non-fullerene acceptors for organic solar cells

Cenqi Yan et al.

NATURE REVIEWS MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Two compatible nonfullerene acceptors with similar structures as alloy for efficient ternary polymer solar cells

Wenyan Su et al.

NANO ENERGY (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Versatile ternary organic solar cells: a critical review

Qiaoshi An et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Add to Collection

Review Multidisciplinary Sciences

Photovoltaic materials: Present efficiencies and future challenges

Albert Polman et al.

SCIENCE (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Roll-to-roll fabrication of polymer solar cells

Roar Sondergaard et al.

MATERIALS TODAY (2012)

Add to Collection

Article Physics, Applied

Effect of traps on the performance of bulk heterojunction organic solar cells

M. M. Mandoc et al.

APPLIED PHYSICS LETTERS (2007)

Add to Collection

Article Polymer Science

Morphology and phase segregation of spin-casted films of Polyfluorene/PCBM blends

Svante Nilsson et al.

MACROMOLECULES (2007)

Add to Collection

Article Physics, Applied

Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors

P Schilinsky et al.

APPLIED PHYSICS LETTERS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.