Related references
Note: Only part of the references are listed.
Article
Chemistry, Multidisciplinary
Xiaohua Deng et al.
Summary: Heteroatom doped porous carbon materials have shown great potential as cathode materials in metal-air battery systems. In this study, a three-dimensional nitrogen-doped carbon self-supported electrode (TNCSE) was fabricated from raw wood through thermal treatment and acid activation. The TNCSE exhibited superior performance as a cathode in a rechargeable zinc-air battery, surpassing the performance of commercial reference materials.
CHINESE CHEMICAL LETTERS
(2023)
Article
Nanoscience & Nanotechnology
Wenxian Liu et al.
Summary: Fascinating transition metal nitrides and FeCo alloys were successfully integrated through a simple coordination assembly and pyrolysis process, and the alloy-to-nitride ratio in the heterogeneous catalyst can be regulated through the subsequent etching process. The optimized FeCo-Mo0.82N-60 catalyst exhibited a high peak power density of 149.7 mW cm-2 and an impressive stability of 600 h with a low charge-discharge voltage gap decay rate of 0.025 mV h-1 in aqueous ZABs. Furthermore, the FeCo-Mo0.82N-60-based flexible ZABs showed a small specific capacity degradation (3%) from 40 to -10 degrees C, demonstrating excellent temperature tolerance.
ACS APPLIED MATERIALS & INTERFACES
(2023)
Article
Chemistry, Multidisciplinary
Tao Liu et al.
Summary: Nanopores on graphene surface enhance the longitudinal diffusion of electrolyte ions, leading to improved rate performance and cycle stability of the electrode materials.
ADVANCED MATERIALS
(2023)
Article
Chemistry, Physical
Weiqing Zhang et al.
Summary: A high-performance catalyst made of single atomic Ce sites anchored on nitrogen-doped hollow carbon spheres has been developed. It can efficiently electrocatalyze the reduction of NO to NH3 in an acidic solution, achieving a maximal Faradaic efficiency of 91% and a yield rate of 1023 lg h-1 mgcat.-1. The catalyst outperforms Ce nanoclusters and shows good structural and electrochemical stability.
JOURNAL OF COLLOID AND INTERFACE SCIENCE
(2023)
Review
Chemistry, Physical
Wenxian Liu et al.
Summary: Aqueous rechargeable Zn-gas batteries are considered promising energy storage and conversion devices due to their safety and environmental friendliness. However, their energy efficiency and power density are limited by slow cathode reactions. This review introduces battery configurations and fundamental reactions, summarizes recent advances in active site engineering and cathode material regulation strategies, and provides personal perspectives on the future development of Zn-gas batteries.
Article
Chemistry, Multidisciplinary
Ramasamy Santhosh Kumar et al.
Summary: This research focuses on the innovations and challenges of air electrodes and related materials for zinc-air batteries. A nanocomposite of ZnCo2Se4@rGO with excellent electrocatalytic activity is synthesized and applied in a rechargeable zinc-air battery, showing high performance and stability. The study further investigates the catalysts and suggests future developments for high-performance zinc-air batteries.
Article
Nanoscience & Nanotechnology
Junjie Shi et al.
Summary: An air-rechargeable Zn battery based on MoS2/PANI cathode is reported, which exhibits ultra-high capacity and good air-recharging stability. It has the ability to collect, convert, and store energy simultaneously. This work provides a promising research direction for the next-generation self-powered system.
NANO-MICRO LETTERS
(2023)
Article
Chemistry, Physical
Jinmei Li et al.
Summary: In this study, 3D flower-like CoP3/CeO2/C heterostructures were successfully synthesized and exhibited high activity and stability in both oxygen evolution reaction and oxygen reduction reaction, providing a potential solution for improving the performance of zinc-air batteries.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2023)
Article
Chemistry, Multidisciplinary
Tianran Wei et al.
Summary: In this study, a novel catalyst was reported, which can selectively catalyze HMF-to-FDCA oxidation at ambient conditions with high efficiency, yield rate, and conversion. The catalyst also has the capability to simultaneously produce H2 and FDCA.
CHEMICAL COMMUNICATIONS
(2023)
Article
Chemistry, Physical
Wenxian Liu et al.
Summary: A monolithic Fe-Mo-Co-O nanosheet assembly, which comprises of Fe-doped Co2Mo3O8/MoO3/Co3O4 hybridized nanosheets decorated on nickel foam (FMCO/NF), has been developed for efficient and corrosion-resistant seawater splitting. This catalyst shows high activity and durability for water splitting in both freshwater and seawater media, outperforming benchmark catalysts and non-noble metal-based catalysts. Furthermore, it can be used as both cathode and anode in an alkaline seawater electrolyzer, demonstrating low cell voltage, good durability, and high Faradaic efficiency.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2023)
Article
Chemistry, Physical
Jinxiu Feng et al.
Summary: A tunable multi-site electrocatalyst consisting of Cu-Co dual metal-nitrogen-carbon coupled with metal nanoparticles (CuCo-NC/NPs) was successfully manufactured as the cathode for wide-temperature adaptive aqueous zinc-air batteries (ZABs). The optimized electronic structure of active sites in CuCo-NC/NPs resulted in low activation energy and high activity for oxygen reduction reaction. The CuCo-NC/NPs-based ZABs demonstrated excellent stability, high specific capacity, and good performance under extreme temperatures.
Review
Chemistry, Physical
Wenxian Liu et al.
Summary: This review introduces aqueous rechargeable Zn-gas batteries and the challenges they face, discusses recent advances in enhancing the intrinsic catalytic activities of cathode catalysts and optimizing the performance of Zn-gas batteries, and presents personal perspectives for future development.
Article
Engineering, Environmental
Wenxian Liu et al.
Summary: The study introduces a new method for efficient production of H2O2 by tailoring the surface structure and coordination environment of cobalt-carbon hybrids to achieve high 2e(-) selectivity. The CoNCF electrodes synthesized exhibit excellent H2O2 selectivity in acidic media, showing potential practical applications.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Multidisciplinary
Ting He et al.
Summary: Iron, nitrogen-codoped carbon nanocomposites have been found to be effective electrocatalysts for the oxygen reduction reaction due to the formation of FeNxCy coordination moieties. Experimental and computational results show that incorporating single Cu sites can decrease the magnetic moment of the Fe centers and significantly enhance ORR activity over a wide pH range. When used as cathode catalysts in aluminum-air and zinc-air batteries, the Fe-N-C nanocomposites exhibit superior performance compared to commercial Pt/C or Pt/C-RuO2 catalysts.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Chemistry, Multidisciplinary
Mengqiu Xu et al.
Summary: The industrial Haber-Bosch process for ammonia synthesis is important but energy-intensive and polluting, leading to research in eco-friendly NH3 synthesis. A study on electrochemical nitrate reduction reaction (NTRR) using single-atom Cu catalyst found excellent performance, offering guidance for the rational design of highly active, selective, and durable electrocatalysts for NTRR.
Article
Chemistry, Multidisciplinary
Chongchao Yao et al.
Summary: In this study, a novel core-shell ORR catalyst Co2N/CoP@PNCNTs was developed through a simple method, and it was demonstrated to exhibit excellent electrocatalytic activity and long-term stability in alkaline solution. Co2N/CoP@PNCNTs also showed superior electrochemical performance as an air cathode in Zn-air batteries, with high open circuit potential, maximum power density, specific capacity, and negligible voltage decay.
Article
Chemistry, Physical
Kaili Zhu et al.
Summary: By designing the catalyst based on the interfacial water structure, this study achieved high activity and selectivity in electrochemical semihydrogenation. Experimental results showed that PdFe nanosheets could continuously produce a large amount of alkynes for 264 hours, demonstrating significant advantages over traditional thermal semihydrogenation methods in terms of performance, energy, and cost.
Article
Chemistry, Physical
Wei Xia et al.
Summary: In this work, materials informatics techniques were used to predict the properties of nanoporous carbon-based electrocatalyst. A suitable oxygen reduction reaction (ORR) catalyst was identified and fabricated as a single-atom catalyst with predictable structures. The results showed that the designed catalyst exhibited outstanding electrocatalytic activity, which is of great significance for the practice of inorganic synthetic chemistry.
Article
Chemistry, Physical
Lu An et al.
Summary: This study presents a feasible route of co-carbonization of the Fe-loaded UIO-66/g-C3N4 hybrid to access an efficient mesoporous carbon (MC) encapsulated Fe-N ensemble (denoted as Fe-N/MC catalyst). The novel Fe-N/MC catalyst presents significantly improved ORR activity and stability, achieving a high and stable peak power density of 1.15 W cm(-2) with a minor decay (ca. 21.8%) of power density after a long period of discharge. This work may offer a facile strategy to develop non-precious metal-based catalysts with high performance and improved stability.
JOURNAL OF MATERIALS CHEMISTRY A
(2022)
Article
Energy & Fuels
Yue Li et al.
Summary: In this study, the spin polarization of Co3O4 catalysts was successfully regulated by tuning the concentration of cobalt defects, leading to enhanced electrocatalytic water splitting activity.
TRANSACTIONS OF TIANJIN UNIVERSITY
(2022)
Article
Chemistry, Physical
Minghao Hu et al.
Summary: This study reports a novel self-supported electrode with exceptional hydrogen evolution performance in alkaline freshwater and seawater. The electrode also exhibits long-term stability. The synergistic effects of the electrode's structure and materials play a crucial role in enhancing the hydrogen evolution reaction.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2022)
Review
Chemistry, Physical
Sanshuang Gao et al.
Summary: Rechargeable aqueous Zn-CO2 batteries have great potential in addressing environmental problems and energy crises due to their utilization of CO2 and energy output. Developing efficient and stable CO2 reduction reaction (CO2RR) electrocatalysts is crucial for the advancement of this technology. Atomically dispersed metal-based catalysts (ADMCs), with high atom-utilization efficiency and superior catalytic activity, are being explored as promising candidates for Zn-CO2 batteries. Recent research has focused on the development of ADMCs, including transition metal and non-transition metal sites, and the relationship between active site structures and CO2RR activity/Zn-CO2 battery performance.
Article
Chemistry, Multidisciplinary
Xiaohua Deng et al.
Summary: The high overpotential of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in zinc-air batteries (ZABs) hinders their commercialization. In this study, a multifunctional catalyst Co/MoC-NC derived from zeolite imidazole frameworks (ZIFs) was developed for the cathode of ZABs, exhibiting superior ORR and OER catalytic performance and durability. This work provides a viable design concept for constructing rechargeable ZABs.
Review
Chemistry, Multidisciplinary
Riyue Ge et al.
Summary: Molybdenum carbide-based nanomaterials show competitive performances for energy conversion applications due to their unique physicochemical properties. Surface and interface engineering holds promise for constructing efficient MoxC-based electrocatalysts, but challenges like low electronic conductivity, catalytic efficiency, and structural instability need to be addressed.
Review
Engineering, Environmental
Soraya Hosseini et al.
Summary: Lithium-ion batteries and zinc-air batteries have attracted increasing interest in the field of energy storage, with lithium-ion batteries being favored for small-scale energy storage due to their efficiency and cyclability. However, limitations in availability and cost have hindered their commercial deployment for large-scale applications, while zinc-air batteries show comparable efficiencies and hold potential as replacements. Challenges remain in addressing issues related to cycling processes, electrolyte efficiency, and electrode performance.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Physical
Tengteng Gu et al.
Summary: A novel noble-metal-free trifunctional heterostructure electrocatalyst Mo2C/Co@NC was successfully fabricated using a metal-organic framework (MOF)-based approach. The improved structural features and strong interfacial coupling effects between Mo2C nanosheets and Co@NC polyhedron significantly enhanced the intrinsic activities and accessible active sites, boosting the electrocatalytic performance for HER, OER and ORR. This study provides a new protocol for constructing high-performance electrocatalysts for water splitting and zinc-air batteries.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2021)
Article
Chemistry, Multidisciplinary
Yanrong Ren et al.
Summary: The study successfully designed and synthesized a high-efficiency bifunctional electrocatalyst CoS/Co/MoC-N, S-PCNFs, which exhibited excellent performance in oxygen reduction reaction and oxygen evolution reaction, as well as demonstrated outstanding battery performance and durability in Zn-air batteries.
CHINESE CHEMICAL LETTERS
(2021)
Review
Chemistry, Physical
Yulin Wang et al.
Summary: This review highlights the recent advancements in homogenous and heterogenous catalysts for electrocatalytic O-2 reduction reaction (ORR) to H2O2, covering the basic principles of ORR and methodology for investigating ORR to H2O2. It discusses H2O2 production over homogenous catalysts and recent breakthroughs with heterogenous catalysts, emphasizing nonnoble metal-based nanomaterials, carbon materials, and single-atom catalysts. Challenges and opportunities for electrochemical ORR to H2O2 are also critically examined in the review.
ADVANCED ENERGY MATERIALS
(2021)
Article
Chemistry, Physical
Ansheng Wang et al.
Summary: Rationally designing an efficient and stable multifunctional electrocatalyst to replace noble metal catalysts is challenging, but the newly developed method to synthesize metal nanoparticles enclosed in defective nitrogen-doped graphene has shown superior activities in various electrochemical reactions. This finding provides insights into designing electrocatalysts with high stability and multifunctional catalytic activities.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2021)
Article
Chemistry, Multidisciplinary
Bo Yu et al.
Summary: The study presents a facile and scalable spray-drying strategy to construct conductive Mo2C quantum dots-decorated carbon nanotube networks as an efficient absorbent and electrocatalyst for Li-S batteries. The MCN/S electrode exhibits high specific capacity and ultrastable cycling stability, providing deep insights into polar nanoarchitecture design and scalable fabrication for advanced Li-S batteries.
Article
Chemistry, Multidisciplinary
Zhihua Cheng et al.
Summary: This study introduces a simple method to form in-plane heterostructures capable of efficient pH-universal hydrogen evolution reaction (HER) by chemically bonding MoS2 (002) planes and α-MoC {111} planes. The catalyst exhibits high HER performance in acidic solution with only a low overpotential required to achieve high current density, and also shows excellent performance in neutral and alkaline conditions.
Article
Chemistry, Multidisciplinary
Lei Zhang et al.
Summary: A concept of trifunctional catalyst design was proposed in this study, which fabricated high-efficiency N-doping carbon nanoboxes through interface engineering and nanoscale hollowing design. The catalyst not only showed outstanding performance in regenerative Zn-air battery, but also demonstrated good properties in overall water splitting, with both theoretical and experimental results confirming its role in facilitating charge transfer.
Article
Chemistry, Physical
Jayaraman Balamurugan et al.
Summary: The development of 3D nickel molybdenum oxyselenide nanoarchitectures with numerous oxygen vacancies through a low-cost hydrothermal and selenium ion modulation approach has been shown to enhance catalytic activities and electrochemical performance. This strategy provides a general approach to explore efficient multifunctional catalysts with enhanced durability for applications such as flexible Zn-air batteries and water electrolyzers.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2021)
Article
Engineering, Environmental
Chaoran Pi et al.
Summary: In this study, three-dimensional porous heterostructured α-MoC/VN electrocatalysts were prepared by in situ carbonization and nitridation, showing efficient and stable HER electrocatalytic properties with promising applications in electrochemical water splitting and energy conversion.
CHEMICAL ENGINEERING JOURNAL
(2021)
Review
Nanoscience & Nanotechnology
Tianchen Qin et al.
Summary: Transition metal carbides (TMCs), as a new member in the two-dimensional materials family, show great potential for applications in transparent electrodes, flexible electronics, broadband photodetectors, and battery electrodes due to their excellent properties. However, the controllable synthesis of TMCs remains a challenge, hindering their device applications. This review systematically summarizes the latest research on TMCs' structure, properties, synthesis, and applicability, while also outlining current challenges and future perspectives for their application.
NANO-MICRO LETTERS
(2021)
Review
Chemistry, Multidisciplinary
Dong Tian et al.
Summary: Transition metal carbides and nitrides, as interesting non-precious materials that can replace or reduce the loading of precious metals for catalyzing important electrochemical reactions, have attracted high interest from scientific communities. This review summarizes density functional theory studies, describes reaction pathways, identifies activity and selectivity descriptors, and provides a future outlook for designing carbide and nitride catalysts.
CHEMICAL SOCIETY REVIEWS
(2021)
Article
Materials Science, Multidisciplinary
Chao Lin et al.
Summary: A high-performance asymmetric metal-air battery was developed with a specially designed separator and electrocatalyst, leading to enhanced battery performance.
Article
Chemistry, Multidisciplinary
Wenxian Liu et al.
Summary: The study presents a bioinspired interfacial engineering strategy to construct a new type of air electrode with excellent catalytic activity and interface area, providing high performance for flexible Zn-air batteries. The Zn-air batteries fabricated using this electrode achieve high power density, mechanical flexibility, and excellent durability.
Article
Chemistry, Physical
Thanh Tuan Nguyen et al.
Summary: The oxygen vacancies enriched V-O-CMON@NCN catalyst has shown exceptional performance as an advanced air-cathode for rechargeable zinc-air batteries, surpassing conventional Pt/C and RuO2 catalysts in both oxygen reduction and oxygen evolution reactions. The rechargeable ZABs with V-O-CMON@NCN-800 air-cathode exhibited high specific capacity, peak power density, and long cycling life, suggesting the potential of V-O-CMON@NCN as promising bifunctional catalysts for next-generation metal-air batteries and other energy-related applications.
JOURNAL OF MATERIALS CHEMISTRY A
(2021)
Article
Chemistry, Multidisciplinary
Yanqiang Li et al.
Summary: Molybdenum carbide-based catalysts show great potential in electrochemical reactions such as the hydrogen evolution reaction and oxygen evolution reaction due to their unique electronic structure and physicochemical properties. Research has systematically summarized the synthesis strategies, structure, and catalytic performance of these catalysts, highlighting the relationships between process-structure-property and analyzing catalytic mechanisms. Existing challenges and future perspectives for further development of molybdenum carbide-based catalysts have also been discussed.
MATERIALS TODAY CHEMISTRY
(2021)
Article
Chemistry, Multidisciplinary
Yufei Ma et al.
ADVANCED FUNCTIONAL MATERIALS
(2020)
Article
Materials Science, Ceramics
Guo-Dong Sun et al.
CERAMICS INTERNATIONAL
(2020)
Article
Chemistry, Physical
Dinh Chuong Nguyen et al.
ADVANCED ENERGY MATERIALS
(2020)
Article
Chemistry, Multidisciplinary
Zhishuang Song et al.
ADVANCED MATERIALS
(2020)
Review
Chemistry, Physical
Yin Zhou et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE
(2020)
Article
Chemistry, Physical
Qingyan Zhou et al.
Article
Chemistry, Physical
Sanjay Upadhyay et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2020)
Article
Chemistry, Multidisciplinary
Defeng Qi et al.
Article
Chemistry, Multidisciplinary
Peng Yu et al.
ADVANCED MATERIALS
(2019)
Review
Chemistry, Multidisciplinary
Yuchen Deng et al.
ACCOUNTS OF CHEMICAL RESEARCH
(2019)
Review
Chemistry, Multidisciplinary
Kyuju Kwak et al.
ACCOUNTS OF CHEMICAL RESEARCH
(2019)
Review
Chemistry, Physical
Shasha Li et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2019)
Article
Chemistry, Physical
Chaoyun Tang et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2019)
Article
Chemistry, Physical
Junpo Guo et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2017)
Article
Chemistry, Physical
Zhe Lv et al.
JOURNAL OF MATERIALS CHEMISTRY A
(2017)
Article
Chemistry, Multidisciplinary
Jae Yeong Cheon et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2014)
