☆ 4.8 Article

La-Doped Ultrahigh-Nickel Layered Oxide Cathode with Enhanced Cycle Stability for Li-Ion Batteries

ACS APPLIED MATERIALS & INTERFACES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Stabilizing effects of atomic Ti doping on high-voltage high-nickel layered oxide cathode for lithium-ion rechargeable batteries

Yong Cheng et al.

Summary: High-voltage high-nickel lithium layered oxide cathodes have great application prospects in rechargeable lithium-ion batteries (LIBs) due to their high output capacity. However, structural degradation and undesired electrode-electrolyte interface reactions pose challenges to the cycle life and safety of the battery. This study introduces titanium (Ti) doping into the cathode material to improve stability and address these issues. The Ti-doped material shows higher capacity retention and better rate capacity compared to the pristine material. This research provides valuable insights for the application of high-voltage high-nickel cathodes in LIBs.

NANO RESEARCH (2022)

Add to Collection

Article Chemistry, Physical

Magnesium Substitution in Ni-Rich NMC Layered Cathodes for High-Energy Lithium Ion Batteries

Aurora Gomez-Martin et al.

Summary: This study investigates the Mg substitution of Ni-rich LiNi1-x-yMnxCoyO2 (NMC) layered oxides and demonstrates a linear correlation between cycle life and attainable gravimetric capacities, which are influenced by the degree of Mg substitution and the amount of cycled Li+ ions. To achieve a higher energy density, a lower Mg content and higher Ni content should be considered.

ADVANCED ENERGY MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Strengthened the structural stability of in-situ F- doping Ni-rich LiNi0.8Co0.15Al0.05O2 cathode materials for lithium-ion batteries

Jiale Wang et al.

Summary: The introduction of F doping is an important approach to improve the structure and performance of Ni-rich oxides for cathode materials.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Gradient doping Mg and Al to stabilize Ni-rich cathode materials for rechargeable lithium-ion batteries

Yudong Zhang et al.

Summary: This study reports a concentration-gradient Mg and Al doped cathode material, which exhibits stability, high capacity, outstanding cyclability, and remarkable rate capability. The gradient co-doping boosts the electrochemical performance and enhances Li-ion diffusion and thermal stability.

JOURNAL OF POWER SOURCES (2022)

Add to Collection

Article Chemistry, Applied

B-doped and La4NiLiO8-coated Ni-rich cathode with enhanced structural and interfacial stability for lithium-ion batteries

Lingjun Li et al.

Summary: Ni-rich layered oxides are promising cathodes for advanced lithium-ion batteries, but their structural and interfacial stability issues hinder practical application. In this study, a B-doped and La4NiLiO8-coated LiNi0.825Co0.115Mn0.06O2 cathode was synthesized using a one-step method, and the dual-modification strategy significantly improved the stability of the structure and interface, leading to excellent cycling performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Add to Collection

Article Energy & Fuels

Suppressing Ni/Li disordering in LiNi0.6Mn0.2Co0.2O2 cathode material for Li-ion batteries by rare earth element doping

Magdalena Zybert et al.

Summary: The demand for efficient lithium-ion batteries for vehicles and energy storage requires improving the properties of cathode materials. This study successfully suppressed the mixing of Ni/Li cations in cathode materials by introducing rare earth elements, resulting in significantly improved electrochemical performance.

ENERGY REPORTS (2022)

Add to Collection

Article Chemistry, Physical

Nickel-rich and cobalt-free layered oxide cathode materials for lithium ion batteries

Yu-hong Luo et al.

Summary: This review comprehensively summarizes the development of nickel-rich and cobalt-free cathode materials, highlighting their competitive advantages in reducing costs and increasing energy density. It emphasizes the importance of developing new materials and provides solutions and future research directions to address current deficiencies in this field.

ENERGY STORAGE MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Elucidating the Effect of the Dopant Ionic Radius on the Structure and Electrochemical Performance of Ni-Rich Layered Oxides for Lithium-Ion Batteries

Yang-Yang Wang et al.

Summary: The study showed that an increase in the doping ion radius can enlarge the interlayer spacing but may lead to the collapse of the structure if the ion radius is too large, which undermines the cycling stability of the material. Mg doping can enhance the structural stability and thermal stability of Ni-rich oxide cathode materials.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

Dual-site lattice modification regulated cationic ordering for Ni-rich cathode towards boosted structural integrity and cycle stability

Chunliu Xu et al.

Summary: The dual-site doping of Zn2+ in Ni-rich cathode materials successfully enhances the cationic ordering and suppresses cationic mixing, leading to high capacity and stable cyclability in lithium-ion batteries.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Electrochemistry

Understanding the combined effect of Ca doping and phosphate coating on Ni-rich LiNi0.91Co0.06Mn0.03O2 cathode material for Li-ion batteries

Tahir Sattar et al.

Summary: Ni-rich cathode materials show high discharge capacity and rate capability, but residual lithium compounds and structural instability can affect battery performance. Co-doping and coating with CaHPO4 can enhance chemical and structural stability, leading to improved battery performance.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Yttrium Surface Gradient Doping for Enhancing Structure and Thermal Stability of High-Ni Layered Oxide as Cathode for Li-Ion Batteries

Yang-Yang Wang et al.

Summary: The authors improved the structure and thermal stability of high-nickel layered oxides by introducing yttrium through surface gradient doping, leading to enhanced electrochemical performance. The yttrium-doped sample showed good capacity retention, potential stability, and superior thermal behavior, attributed to strong yttrium-oxygen bonding and a stable oxygen framework on the surface layer.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Engineering, Environmental

Enhanced cycling stability of Sn-doped Li[Ni0.90Co0.05Mn0.05]O-2 via optimization of particle shape and orientation

Trung Thien Nguyen et al.

Summary: The proposed Sn substitution method improves the cycling stability of Ni-rich layered cathodes by effectively suppressing microcrack formation and propagation. The microstructure-modified Sn-NCM90 cathode shows enhanced cycling performance with high capacity retention after multiple cycles.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Multidisciplinary Sciences

Transition metal-doped Ni-rich layered cathode materials for durable Li-ion batteries

H. Hohyun Sun et al.

Summary: This study investigates the effect of transition metal dopants on the properties of Ni-rich cathode active materials and finds that dopants with high oxidation states significantly improve the cycling stability and performance of Li-ion batteries. Physicochemical measurements reveal substantial differences in grain geometries and crystal lattice structures of various cathode materials, which correlate with the oxidation states of their dopants.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Multidisciplinary Sciences

Rational design of mechanically robust Ni-rich cathode materials via concentration gradient strategy

Tongchao Liu et al.

Summary: The study found that using concentration gradient design can successfully alleviate particle cracking issues in Ni-rich cathode materials without sacrificing electrode capacity. By investigating the effects of Co and Mn on the mechanical properties of Ni-rich materials, it is found that Co-enriched surface design helps suppress particle cracking formation, while Mn-enriched core limits internal expansion and improves structural integrity. The concentration gradient design also promotes morphological stability and cycling performances in Li metal coin cell configuration.

NATURE COMMUNICATIONS (2021)

Add to Collection

Review Chemistry, Physical

A Review of Degradation Mechanisms and Recent Achievements for Ni-Rich Cathode-Based Li-Ion Batteries

Ming Jiang et al.

Summary: The demand for sustainable energy storage has led to a need for rechargeable lithium-ion batteries with higher specific capacity and safety standards, which has put Ni-rich layered transition metal oxides in the spotlight. While these materials show promise for the next generation of batteries, their instability poses challenges for commercialization. This paper reviews degradation processes in Ni-rich cathode-based LIBs and discusses recent advancements in stabilization strategies for future battery components.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Moonsu Yoon et al.

Summary: The use of engineered polycrystalline electrodes in lithium-ion batteries is crucial for cycling stability and safety, but achieving high-quality coatings at both the primary and secondary particle levels can be challenging. A coating-and-infusion approach using cobalt boride metallic glass on a Ni-rich layered cathode has been shown to significantly enhance performance, including rate capability and cycling stability under various conditions. The success of this approach is attributed to the simultaneous suppression of microstructural degradation and side reactions, as well as the critical role of strong selective interfacial bonding in ensuring uniform reactive wetting and facilitating infusion.

NATURE ENERGY (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Recent breakthroughs and perspectives of high-energy layered oxide cathode materials for lithium ion batteries

Junxiang Liu et al.

Summary: Ni-rich layered oxides (NRLOs) and Li-rich layered oxides (LRLOs) are promising cathode materials for lithium ion batteries (LIBs) due to their high energy density, low cost, and environmental friendliness. However, they face similar challenges such as capacity fading and different obstacles like thermal runaway for NRLOs and voltage decay for LRLOs. Strategies to improve their performance from different scales including ion-doping, microstructure designs, particle modifications, and electrode/electrolyte interface engineering are essential for their development.

MATERIALS TODAY (2021)

Add to Collection

Article Chemistry, Applied

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Lin-bo Tang et al.

Summary: A novel Ni-rich oxide composite material with a La2Zr2O7 coating and Zr doping was successfully designed in this study, showing improved ion diffusion kinetics and suppressed phase transition, leading to excellent electrochemical performance.

JOURNAL OF ENERGY CHEMISTRY (2021)

Add to Collection

Review Chemistry, Physical

Fundamental and solutions of microcrack in Ni-rich layered oxide cathode materials of lithium-ion batteries

Shouyi Yin et al.

Summary: This review discusses the challenges and solutions of modifying Ni-rich layered cathodes specifically for microcrack failure, including mechanisms of microcrack formation and evolution, recent advances in stabilizing the structure/interface of Ni-rich cathodes, and strategies to mitigate microcracks and improve electrochemical performance. Additionally, outlook and perspectives for practical application of Ni-rich layered cathodes in electric vehicles are provided.

NANO ENERGY (2021)

Add to Collection

Article Chemistry, Physical

A perspective on single-crystal layered oxide cathodes for lithium-ion batteries

Jayse Langdon et al.

Summary: The increasing demand for lithium-ion batteries calls for higher energy density and longer cycle life. Single-crystal cathode particles have attracted intense interest due to their remarkable cyclability, but there has been no systematic analysis of the different techniques in this field thus far.

ENERGY STORAGE MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Revisiting the role of Zr doping in Ni-rich layered cathodes for lithium-ion batteries

Chul-Ho Jung et al.

Summary: The study successfully achieved electrochemically stabilized Ni-rich LiNi0.92Co0.04Mn0.04O2 through Zr doping, resulting in a 15% increase in capacity retention after 100 cycles. In-depth investigations revealed the critical role of Zr doping in lattice oxygen stability, which positively contributes to the cathode electrochemical reversibility.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Add to Collection

Article Chemistry, Physical

Improved electrochemical performances of Ni-rich LiNi0.83Co0.12Mn0.5O2 by Mg-doping

Yeting Lv et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Energy & Fuels

High-nickel layered oxide cathodes for lithium-based automotive batteries

Wangda Li et al.

NATURE ENERGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Improving the Structure and Cycling Stability of Ni-Rich Layered Cathodes by Dual Modification of Yttrium Doping and Surface Coating

Yan Huang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High-Nickel NMA: A Cobalt-Free Alternative to NMC and NCA Cathodes for Lithium-Ion Batteries

Wangda Li et al.

ADVANCED MATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Enhanced cycling stability of nickel-rich layered oxide by tantalum doping

Sidra Jamil et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Multidisciplinary Sciences

Mutual modulation between surface chemistry and bulk microstructure within secondary particles of nickel-rich layered oxides

Shaofeng Li et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Ni-Li anti-site defect induced intragranular cracking in Ni-rich layer-structured cathode

Qingyun Lin et al.

NANO ENERGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode

Yujing Bi et al.

SCIENCE (2020)

Add to Collection

Editorial Material Multidisciplinary Sciences

Prospects for lithium-ion batteries and beyond-a 2030 vision

Clare P. Grey et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Chemistry, Physical

Artificial cathode-electrolyte interphases on nickel-rich cathode materials modified by silyl functional group

Hye Ji Song et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Synergy of doping and coating induced heterogeneous structure and concentration gradient in Ni-rich cathode for enhanced electrochemical performance

Yong-Chun Li et al.

JOURNAL OF POWER SOURCES (2019)

Add to Collection

Article Chemistry, Physical

Improving the reversibility of the H2-H3 phase transitions for layered Ni-rich oxide cathode towards retarded structural transition and enhanced cycle stability

Feng Wu et al.

NANO ENERGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Improving the Structure Stability of LiNi0.8Co0.1Mn0.1O2 by Surface Perovskite-like La2Ni0.5Li0.5O4 Self-Assembling and Subsurface La3+ Doping

Feng Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Physical

Dopant Distribution in Co-Free High-Energy Layered Cathode Materials

Linqin Mu et al.

CHEMISTRY OF MATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Use of Ce to Reinforce the Interface of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode Materials for Lithium-Ion Batteries under High Operating Voltage

Feng Wu et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Electrochemistry

Effect of Ti ion doping on electrochemical performance of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material

Dengke Zhang et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneously Dual Modification of Ni-Rich Layered Oxide Cathode for High-Energy Lithium-Ion Batteries

Huiping Yang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Add to Collection

Review Chemistry, Physical

Designing principle for Ni-rich cathode materials with high energy density for practical applications

Yu Xia et al.

NANO ENERGY (2018)

Add to Collection

Article Energy & Fuels

Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries

Pengfei Yan et al.

NATURE ENERGY (2018)

Add to Collection

Article Chemistry, Physical

Na-Doped LiNi0.8Co0.15Al0.05O2 with Excellent Stability of Both Capacity and Potential as Cathode Materials for Li-Ion Batteries

Yang-Yang Wang et al.

ACS APPLIED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Nickel-Rich and Lithium-Rich Layered Oxide Cathodes: Progress and Perspectives

Arumugam Manthiram et al.

ADVANCED ENERGY MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Understanding the role of Na-doping on Ni-rich layered oxide LiNi0.5Co0.2Mn0.3O2

Ruirui Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Multidisciplinary Sciences

Modification of Ni-Rich FCG NMC and NCA Cathodes by Atomic Layer Deposition: Preventing Surface Phase Transitions for High-Voltage Lithium-Ion Batteries

Debasish Mohanty et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Multifunctional AlPO4 Coating for Improving Electrochemical Properties of Low-Cost Li[Li0.2Fe0.1Ni0.15Mn0.55]O2 Cathode Materials for Lithium-Ion Batteries

Feng Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Review Chemistry, Multidisciplinary

Nickel-Rich Layered Lithium Transition-Metal Oxide for High-Energy Lithium-Ion Batteries

Wen Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Add to Collection

Article Chemistry, Physical

Facile synthesis of one-dimensional LiNi0.8Co0.15Al0.05O2 microrods as advanced cathode materials for lithium ion batteries

Naiteng Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Physical

Progress in High-Capacity Core-Shell Cathode Materials for Rechargeable Lithium Batteries

Seung-Taek Myung et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

Add to Collection

Article Chemistry, Physical

Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction

Debasish Mohanty et al.

JOURNAL OF POWER SOURCES (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Lithium Nickel Cobalt Manganese Oxide Synthesized Using Alkali Chloride Flux: Morphology and Performance As a Cathode Material for Lithium Ion Batteries

Yongseon Kim

ACS APPLIED MATERIALS & INTERFACES (2012)

Add to Collection

Article Chemistry, Multidisciplinary

The Birth of the Lithium-Ion Battery

Akira Yoshino

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)

Add to Collection

Review Chemistry, Physical

Challenges for Rechargeable Li Batteries

John B. Goodenough et al.

CHEMISTRY OF MATERIALS (2010)

Add to Collection

Article Chemistry, Physical

Novel core-shell-structured Li[(Ni0.8Co0.2)0.8(Ni0.5Mn0.5)0.2]O2 via coprecipitation as positive electrode material for lithium secondary batteries

YK Sun et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.