Developing Catalysts Integrated in Gas-Diffusion Electrodes for CO2 Electrolyzers

As the demand for a carbon-neutral society grows rapidly, research on CO2 electrolysis has become very active. Many catalysts are reported for converting CO2 into value-added products by electrochemical reactions, which have to perform at high Faradaic and energy efficiency to become commercially viable. Various types of CO2 electrolyzers have been used in this effort, such as the H-cell, flow cell, and zero-gap membrane-electrode assembly (MEA) cell. H-cell studies are conducted with electrodes immersed in CO2-saturated electrolyte and have been used to elucidate reaction pathways and kinetic parameters of electrochemical CO2 reduction on many types of catalytic surfaces. From a transport phenomenological perspective, the low solubility and diffusion of CO2 to the electrode surface severely limit the maximum attainable current density, and this metric has been shown to have significant influence on the product spectrum. Flow and MEA cells provide a solution in the form of gas-diffusion electrodes (GDEs) that enable gaseous CO2 to closely reach the catalyst layer and yield record-high current densities. Because GDEs involve a complicated interface consisting of the catalyst surface, gaseous CO2, polymer overlayers, and liquid electrolyte, catalysts with high intrinsic activity might not show high performance in these GDE-based electrolyzers. Catalysts showing low overpotentials at low current densities may suffer from poor electron conductivity and mass transfer limitations at high current densities. Furthermore, the stability of the GDE-based catalysts is often compromised as CO2 electrolysis is pursued with high activity, most notoriously by electrolyte flooding.In this Account, we introduce recent examples where the electrocatalysts were integrated in GDEs, achieving high production rates. The performance of such systems is contingent on both GDE and cell design, and various parameters that affect the cell performance are discussed. Gaseous products, such as carbon monoxide, methane, and ethylene, and liquid products, such as formate and ethanol, have been mainly reported with high partial current density using the flow or MEA cells. Different strategies to this end are described, such as controlling microenvironments by the use of polymers mixed within the catalyst layer or the functionalization of catalyst surfaces with ligands to increase local concentrations of intermediates. Unique CO2 electrolyzer designs are also treated, including the incorporation of light-responsive plasmonic catalysts in the GDE, and combining the electrolyzer with a fermenter utilizing a microbial biocatalyst to synthesize complex multicarbon products. Basic conditions which the catalyst should satisfy to be adapted in the GDEs are listed, and our perspective is provided.

Automated summary

As demand for a carbon-neutral society grows, research on CO2 electrolysis has become active. Flow and MEA cells with gas-diffusion electrodes (GDEs) achieve high production rates, but the complex interface of GDEs may affect the performance of catalysts with high intrinsic activity. High current densities can also lead to conductivity and mass transfer limitations as well as catalyst instability. Strategies such as controlling microenvironments and unique electrolyzer designs have been used to achieve high partial current densities for both gaseous and liquid products.