☆ 4.2 Article

Membrane Contactors as a Cost-Effective Cyanide Recovery Technology for Sustainable Gold Mining

ACS ES&T WATER (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Chemical

Lime use in gold processing-A review

C. A. du Plessis et al.

Summary: The gold processing industry heavily relies on lime reagents for pH control and neutralization in cyanidation and refractory gold processing. Besides conditions influencing lime consumption, its positive impact on gold absorption onto carbon in CIP/CIL circuits is noteworthy. The quantity of lime consumed is influenced by various factors such as lime properties, preparation methods, ore type, and processing flow sheet.

MINERALS ENGINEERING (2021)

Add to Collection

Article Geography

The cyanide revolution: Efficiency gains and exclusion in artisanal- and small-scale gold mining

Boris Verbrugge et al.

Summary: Cyanide processing in industrial gold mining has had a significant impact, and now artisanal and small-scale gold mining is experiencing a similar transition, leading to efficiency gains and unequal labor and revenue-sharing arrangements. It is crucial to be cautious of unintended consequences when intervening in the technological make-up of ASGM.

GEOFORUM (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Enhancing the effectiveness of copper and cyanide recovery in gold cyanidation: A new integrated membrane process

Humberto Estay et al.

Summary: The novel integrated membrane process SuCy presents a promising alternative to the traditional SART process in gold mining by effectively clarifying copper precipitates, producing concentrated cyanide solutions, and clarifying gypsum, leading to reduction in equipment size requirements and capital costs. This study conducted sequential tests at laboratory scale using different synthetic cyanide solutions and a real solution from a gold mine, showing higher permeate flux values for copper precipitates suspensions, efficient HCN flux in the GFMA stage, and reduced flux in the ultrafiltration stage for the real solution due to high sulfate content. The SuCy process demonstrated up to 90% plant size reduction, over 25% decrease in capital cost, and similar operational costs compared to the SART process, highlighting its potential as a cost-effective and efficient alternative.

HYDROMETALLURGY (2021)

Add to Collection

Article Geochemistry & Geophysics

Incorporation of Geometallurgical Input into Gold Mining System Simulation to Control Cyanide Consumption

Javier Ordenes et al.

Summary: The Alhue deposit in Melipilla, Chile is a hydrothermal vein system hosting Au-Ag-Zn(-Pb) mineralization, with dominant ore minerals being electrum and native gold associated with silver sulfosalts. The veins also contain base metal sulphides, alteration minerals like quartz, epidote, chlorite, actinolite, as well as harmful copper and iron minerals that impact precious metal extraction. Proper operational modes can be managed to control cyanide consumption and optimize metal extraction.

MINERALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

The Impact of Metal Mining on Global Water Stress and Regional Carrying Capacities-A GIS-Based Water Impact Assessment

Simon Meissner

Summary: Mining's consumption of freshwater may have significant impacts on water resources at regional and local scales when it exceeds available water and environmental requirements. Using GIS for water footprint accounting and water scarcity assessment helps understand how the global mining industry influences regional carrying capacities and water stress.

RESOURCES-BASEL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Photocatalytic Advanced Oxidation Processes for Neutralizing Free Cyanide in Gold Processing Effluents in Arequipa, Southern Peru

David C. Vuono et al.

Summary: The study aimed to optimize the use of UV radiation coupled with H2O2 to enhance the removal of cyanide in gold processing effluents. Higher UV intensity and H2O2 accelerated cyanide degradation, while a lower concentration effluent demonstrated faster removal rates compared to highly concentrated effluent._testing TiO2 photocatalyst with low stoichiometric ratios of CN-:H2O2 showed significant improvement in degradation rate within a short period of time.

SUSTAINABILITY (2021)

Add to Collection

Article Engineering, Environmental

A hybrid catalytic hydrogenation/membrane distillation process for nitrogen resource recovery from nitrate-contaminated waste ion exchange brine

Xiangchen Huo et al.

WATER RESEARCH (2020)

Add to Collection

Article Biochemistry & Molecular Biology

An Experimental Study of Membrane Contactor Modules for Recovering Cyanide through a Gas Membrane Process

Michelle Quilaqueo et al.

MEMBRANES (2020)

Add to Collection

Article Engineering, Civil

Disputes over land and water rights in gold mining: the case of Cerro de San Pedro, Mexico

Didi Stoltenborg et al.

WATER INTERNATIONAL (2016)

Add to Collection

Article Geochemistry & Geophysics

The fate of cyanide in leach wastes at gold mines: An environmental perspective

Craig A. Johnson

APPLIED GEOCHEMISTRY (2015)

Add to Collection

Article Engineering, Chemical

Design and cost estimation of a gas-filled membrane absorption (GFMA) process as alternative for cyanide recovery in gold mining

Humberto Estay et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

Add to Collection

Article Environmental Sciences

Assessment of the effluent quality from a gold mining industry in Ghana

Mike A. Acheampong et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

A novel process based on gas filled membrane absorption to recover cyanide in gold mining

Humberto Estay et al.

HYDROMETALLURGY (2013)

Add to Collection

Article Engineering, Chemical

Cyanide and removal options from effluents in gold mining and metallurgical processes

Nural Kuyucak et al.

MINERALS ENGINEERING (2013)

Add to Collection

Review Engineering, Chemical

A review of copper cyanide recovery technologies for the cyanidation of copper containing gold ores

Xianwen Dai et al.

MINERALS ENGINEERING (2012)

Add to Collection

Review Engineering, Chemical

A review of the selective leaching of gold from oxidised copper-gold ores with ammonia-cyanide and new insights for plant control and operation

D. M. Muir

MINERALS ENGINEERING (2011)

Add to Collection

Article Multidisciplinary Sciences

Gold Mining in the Peruvian Amazon: Global Prices, Deforestation, and Mercury Imports

Jennifer J. Swenson et al.

PLOS ONE (2011)

Add to Collection

Article Engineering, Environmental

Removal of cyanide from acrylonitrile wastewater using gas membrane

Jinling Wu et al.

WATER SCIENCE AND TECHNOLOGY (2011)

Add to Collection

Article Engineering, Environmental

Ammonia removal from wastewater streams through membrane contactors: Experimental and theoretical analysis of operation parameters and configuration

A. Hasanoglu et al.

CHEMICAL ENGINEERING JOURNAL (2010)

Add to Collection

Article Engineering, Chemical

Cyanide recovery by tailings washing and pond stripping

Mike Adams et al.

MINERALS ENGINEERING (2008)

Add to Collection

Article Engineering, Chemical

Application of vacuum membrane distillation for ammonia removal

M. S. EL-Bourawi et al.

JOURNAL OF MEMBRANE SCIENCE (2007)

Add to Collection

Article Engineering, Chemical

Cyanide removal from industrial wastewaters using gas membranes

BB Han et al.

JOURNAL OF MEMBRANE SCIENCE (2005)

Add to Collection

Article Engineering, Chemical

Modified modeling of the effect of pH and viscosity on the mass transfer in hydrophobic hollow fiber membrane contactors

ZZ Zhu et al.

JOURNAL OF MEMBRANE SCIENCE (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.