Related references
Note: Only part of the references are listed.
Article
Materials Science, Multidisciplinary
Shijie Li et al.
Summary: A novel Cd0.5Zn0.5S/Bi2WO6 S-scheme heterojunction photocatalyst with high photo-carrier disassociation and photo-redox power was developed for efficient elimination of pollutants in water.
ADVANCED POWDER MATERIALS
(2023)
Article
Chemistry, Multidisciplinary
Yanmei Huang et al.
Summary: By constructing Ru single atoms decorated TiO2 nanosheets, this study achieved efficient NO photosynthesis. Experiments and in situ characterizations confirmed the origin of NO from N2 photooxidation, with the breaking of the O-O bond to form (N-O)2-Ru intermediates identified as the rate-determining step.
Review
Chemistry, Multidisciplinary
Liuyang Zhang et al.
Summary: This article presents the superiority and design criteria of the emerging S-scheme heterojunction in photocatalysis. By overcoming the challenges faced by single photocatalysts through the construction of heterojunctions, the S-scheme heterojunction has demonstrated its potential in improving photocatalysis. The critical understanding of the curved Fermi level in the S-scheme heterojunction interface and the current challenges and prospects of S-scheme heterojunction photocatalysts are also discussed.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Xiaoyi Jiang et al.
Summary: This research proposes a plasmonic active hot spot-confined photocatalysis technology to achieve efficient and selective CO2 reduction by forming active hot spots in the Au/TiO2/W18O49 heterostructure, resulting in the production of abundant CH4 and CO.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Multidisciplinary
Qi Yin et al.
Summary: This study successfully prepared a series of metalloporphyrinic hydrogen-bonded organic frameworks (HOFs) with high surface area and excellent stability by introducing a transition metal which caused noticeable changes on noncovalent interaction, orbital overlap, and molecular geometry. These metalloporphyrinic HOFs were then used as photocatalysts for the photoreduction of CO2 to CO.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2022)
Article
Engineering, Environmental
Xinyue Xu et al.
Summary: The study conducted density functional theory calculations to predict the formation of an S-scheme heterojunction in the CdS quantum dots/Bi2MoO6 monolayer system. The novel S-scheme system showed high-efficiency photocatalytic degradation rate towards C2H4 under visible light, providing strong evidence for the S-scheme charge transfer path through in-situ XPS, PL, TRPL and EPR.
JOURNAL OF HAZARDOUS MATERIALS
(2022)
Article
Multidisciplinary Sciences
Jie Fu et al.
Summary: Interface engineering is an effective strategy to improve the efficiency of thin film semiconductor based solar energy conversion devices. In this study, n-type In:GaN and p-type Mg:GaN were employed to modify the bottom and top interfaces of Ta3N5 thin film photoanode, resulting in significant enhancements in efficiency.
NATURE COMMUNICATIONS
(2022)
Article
Chemistry, Multidisciplinary
Pengfei Xia et al.
Summary: A heterojunction-based photocatalytic system is designed to achieve overall nitrogen fixation, converting N-2 molecules into ammonia and nitrate products under mild conditions.
ADVANCED MATERIALS
(2022)
Article
Chemistry, Physical
Mingxin Li et al.
Summary: The oxygen-vacancy-rich TiO2/Ta3N5 composite material synthesized through a solvothermal method shows excellent performance in the photocatalytic degradation of ciprofloxacin. It has high absorption capacity and promotes effective separation of photogenerated carriers, making it a multifunctional catalyst.
APPLIED SURFACE SCIENCE
(2022)
Article
Engineering, Environmental
Azmat Ali Khan et al.
Summary: A well-designed 1D/2D interface heterostructure material has been investigated for photocatalytic CO2 reduction. The material consists of one-dimensional graphitic carbon nitride nanorods coupled with two-dimensional trimetallic CoAlLa-LDH, which provides additional active reaction sites and strong electrostatic interactions. The optimized interface structure enables fast transfer and separation of photogenerated charge carriers, resulting in enhanced photocatalytic activity.
CHEMICAL ENGINEERING JOURNAL
(2022)
Article
Chemistry, Physical
Chaoxin Zhang et al.
Summary: This study develops CuOx clusters decorated TiO2 nanoflowers as a photocatalyst for the oxidation of nitrogen gas in air to nitric oxide (NO) under sunlight. The sample with 1 wt% copper content exhibits the best performance, achieving high yield rate and apparent quantum efficiency. In situ and ex situ characterizations reveal the formation of Cu2O species and TiO2 support, forming a direct Z-scheme heterojunction that enhances the adsorption and activation of nitrogen and oxygen reactants, improving the photosynthesis of NO from air.
JOURNAL OF CATALYSIS
(2022)
Article
Chemistry, Applied
Yanpei Luo et al.
Summary: This study reported the first fabrication of 1D/2D heterostructure for (oxy)nitride semiconductors using a hard-template preparative strategy, which can improve photogenerated charge separation and photocatalytic water splitting performance.
JOURNAL OF ENERGY CHEMISTRY
(2022)
Article
Materials Science, Ceramics
Xiaoshan Xiong et al.
Summary: The catalytic activity of a single catalyst can be optimized by constructing a Z-scheme heterojunction structure with another adaptive material. A novel BMSS catalyst, consisting of 0D Bi2WO6 nanoparticles and 2D MoSSe nanoplates, was developed. The BMSS catalyst exhibited excellent oxidation and reduction abilities, making it promising for applications in photoelectrochemistry and photocatalysis.
CERAMICS INTERNATIONAL
(2022)
Article
Chemistry, Physical
Fanpeng Chen et al.
Summary: Understanding the transformation mechanism from metal oxides to metal phosphides during the phosphorization process is crucial for controlled synthesis of nanomaterials. The study reveals that temperature, time, and the amount of hypophosphite are the driving forces for component and defect control. The synthesized WO2.9/WP material exhibits excellent photocatalytic performance.
Article
Multidisciplinary Sciences
Shunta Nishioka et al.
Summary: Researchers have improved the energy conversion efficiency of solar-driven water splitting for hydrogen production by modifying metal oxides. The use of the optimized photocatalyst achieved the highest STH and apparent quantum yield.
Article
Green & Sustainable Science & Technology
Inhyeong Jeon et al.
Summary: Poor access to safe drinking water is a major global sustainability issue. Solar disinfection provides a feasible solution. Here the authors examine the potential of five most typical types of this technology, revealing their unique challenges and opportunities.
NATURE SUSTAINABILITY
(2022)
Article
Energy & Fuels
Kai Wang et al.
Summary: In this study, a 2D/2D Nb2O5/g-C3N4 S-scheme heterojunction photocatalyst was successfully fabricated for the photocatalytic CO2 reduction reaction. Under simulated solar irradiation, the optimized sample exhibited 6.7 times and 5.3 times higher total yield of C-1 products (CH4 and CO) compared to pristine Nb2O5 and g-C3N4 nanosheets, respectively, without sacrificial agent or cocatalysts. The improved performance of CO2 photoreduction can be attributed to the unique charge transfer bridge, face-to-face contact, and efficient S-scheme transfer path of photoinduced electron-hole pairs in the heterojunction.
Article
Chemistry, Physical
Kai Wang et al.
Summary: Photocatalytic pollutant degradation coupled hydrogen generation via water splitting utilizing solar energy is a promising method for addressing environmental pollution and energy shortage. However, the limited utilization efficiency of solar energy and quick recombination of photogenerated carriers have hindered its application. In this study, a 0D Bi3TaO7 nanodots-decorated 3D ZnIn2S4 nanoflowers photocatalyst was synthesized for efficient simultaneous photocatalytic degradation of antibiotics and hydrogen generation. The relationship between S-scheme heterojunction photocatalysts and photocatalytic pollutant degradation coupled hydrogen evolution will be discussed, along with a careful examination of the interfacial transfer mechanism.
APPLIED SURFACE SCIENCE
(2022)
Article
Materials Science, Multidisciplinary
Yuxiao Chen et al.
Summary: CdS photocorrosion plays a crucial role in the microstructural changes and photocatalytic H2 production of CdS catalysts. The presence of isolated metallic Cd nanoparticles on the CdS surface in the Na2S-Na2SO3 system leads to severe surface damage and decreased photocatalytic activity, while a homogeneously coated metallic Cd layer in the lactic acid system enhances the H2 evolution rate. The formation of CdS-Cd composites with a certain amount of metallic Cd on the CdS surface contributes to stable photocatalytic H2 production and excellent stability.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
(2022)
Article
Materials Science, Multidisciplinary
Hongyu Jing et al.
Summary: This review comprehensively outlines the latest progress of theory-guided design of advanced energy transformation materials, with a focus on the study of single atoms in various power devices and electrocatalytic conversion reactions related to energy. The electronic structure, interaction mechanism, and reaction activation path are discussed, and experimental synthesis strategies, structural recognition, and electrocatalytic performance are determined. Some viewpoints into the current issues and future design concept are also provided.
ADVANCED POWDER MATERIALS
(2022)
Review
Materials Science, Multidisciplinary
Jiaxin Li et al.
Summary: This article reviews the recent advances in the application of Ni-based powder catalysts for urea oxidation in assisting water splitting. The fundamentals of urea oxidation and evaluation indicators are presented, and the design principles and fabrication approaches of the catalysts are discussed. The advances, problems, and challenges of various Ni-based powder catalysts are summarized. The article emphasizes the importance of understanding the structure-property relationship and developing multi-functional Ni-based powder catalysts for real device applications.
ADVANCED POWDER MATERIALS
(2022)
Article
Chemistry, Applied
Shijie Li et al.
Summary: In this study, a novel TaON/Bi2WO6 S-scheme heterojunction nanofibers were developed, showing exceptional visible-light photocatalytic performance for pollutant degradation with satisfactory stability. The research provides guidance for designing high-performance photocatalysts with defects for environmental protection.
CHINESE JOURNAL OF CATALYSIS
(2022)
Article
Materials Science, Multidisciplinary
Xiaolong Li et al.
Summary: A large-area recyclable CFC/BiOBr/ZIF-67 filter-membrane-shaped photocatalyst, with high specific surface area and wide photoabsorption, was successfully prepared. The photocatalyst exhibited high adsorption and degradation efficiencies for organic pollutants both in dark and under visible light irradiation, and it could be recycled for multiple uses.
ADVANCED FIBER MATERIALS
(2022)
Article
Materials Science, Multidisciplinary
Heng Zhai et al.
Summary: This study utilizes scalable dyeing technology to achieve green and sustainable reutilization of waste textiles. Functionalized textile materials exhibit excellent performance in photocatalysis, adsorption capacity, and sustainability. The integrated strategy of night-time adsorption and day-time photodegradation significantly improves the efficiency of dye degradation. This research provides practical potential for efficient and sustainable environmental remediation.
ADVANCED FIBER MATERIALS
(2022)
Article
Electrochemistry
Peng Rao et al.
Summary: This study presents a single-atom catalyst, Co-SAC/NC, designed via a highly efficient plasma-bombing strategy, which exhibits robust ORR performance in an alkaline medium and excellent battery performance as an air-cathode catalyst in a zinc-air battery. Theoretical calculations reveal the structural evolution of the catalyst and the rate-determining step of the reaction.
Article
Electrochemistry
Wang Wang et al.
Summary: In this study, a newly proposed kinetic model was used to investigate the promotion mechanism of the oxygen evolution reaction (OER) for Co3O4 interfaced with nickel hydroxides (NiOxHy). The results revealed that depending on the electrode potential, the OER kinetics at the designed interface between Co3O4 and NiOxHy are boosted in different ways, leading to a lower onset potential and a low Tafel slope.
Article
Electrochemistry
Shengjie Bai et al.
Summary: This study introduces a regulatable three-phase interface on a porous fixed-bed for efficient photocatalytic CO2 reduction, achieving high CO2 selectivity and yield under this configuration.
Article
Materials Science, Multidisciplinary
Dawang Zhou et al.
Summary: This study demonstrates the efficient degradation of fiber-based microplastics through photocatalytic degradation. The results provide a feasible solution for fast degradation of organic pollutants and offer new insights for environmental remediation strategies in the future.
ADVANCED FIBER MATERIALS
(2022)
Article
Materials Science, Multidisciplinary
Caihong Wang et al.
Summary: Hierarchical CuO-ZnO/SiO2 (CZS) nanofibrous membranes were designed and fabricated for the removal of Congo red and 4-nitrophenol in water. The membranes showed good adsorption characteristics and excellent catalytic reduction activity, making them promising for applications in water treatment and environmental protection.
ADVANCED FIBER MATERIALS
(2022)
Article
Chemistry, Inorganic & Nuclear
Jian-Ying Xu et al.
Summary: Herein, a facile two-step synthetic pathway was developed to construct compact CdS-CuS heterostructures for syngas production via CO2 photoreduction. The CdS-CuS-2 photocatalyst exhibited enhanced photocatalytic activity with a syngas yield of approximately 8446 mu mol g(-1), which was approximately 5-fold higher than that of pristine CdS. Syngas with different proportions (H-2/CO) could be readily produced by adjusting the CdS/CuS ratio in the photocatalysts.
INORGANIC CHEMISTRY FRONTIERS
(2022)
Article
Chemistry, Physical
Shanchi Liu et al.
Summary: A novel Mn0.2Cd0.8S@CoAl LDH (MCCA) S-scheme heterojunction photocatalyst was successfully constructed by efficiently coupling Mn0.2Cd0.8S nanorods and CoAl LDH nanosheets. The photocurrent-time response results showed that the internal electric field of the MCCA S-scheme heterojunction can accelerate charge separation and electron transfer, effectively inhibiting the recombination of photogenerated electrons and holes. A significant improvement in photocatalytic hydrogen production activity was achieved.
ACTA PHYSICO-CHIMICA SINICA
(2022)
Review
Materials Science, Multidisciplinary
Qingtong Wang et al.
Summary: This review provides a comprehensive summary of the modification methods of g-C3N4 photocatalyst in recent years, including morphology adjustment, co-catalysts, heterostructures, and doping. It details the advantages and disadvantages of different methods, experimental results, and product yield, while also discussing future challenges and development prospects.
ADVANCED FIBER MATERIALS
(2022)
Article
Energy & Fuels
Junyan Cui et al.
Summary: Crystal facet engineering is crucial for designing efficient photocatalysts. In this study, prism-like octahedral Ta3N5 single crystals with clear facets were synthesized with a mixed KCl-LiCl flux. The Ta3N5 single crystals exhibited enhanced photocatalytic performance compared to conventional Ta3N5 nanoparticles.
Article
Chemistry, Physical
Rui Sun et al.
Summary: This study successfully constructed efficient S-scheme heterojunction photocatalyst PDI/G-CN for converting CO2 into CO and CH4, with a 16-time performance improvement compared to natural CN nanosheets. Through interface modulation, effective S-scheme charge transfer and separation are enhanced, and the optimized amount of highly dispersed PDI is increased, demonstrating the potential practicality of all-organic CN-based S-scheme photocatalysts for efficient solar-to-energy conversion via CO2 reduction.
JOURNAL OF PHYSICAL CHEMISTRY C
(2021)
Article
Engineering, Environmental
Kaihua Yang et al.
Summary: This review focuses on the application and progress of CdS-based nanomaterials in CO2 photoreduction, highlighting the modification of CdS materials for efficient CO2 reduction and emphasizing the use of density functional theory (DFT) in studying CO2 photoreduction over CdS-based photocatalysts. Challenges in optimizing the catalyzing ability of CdS-based catalysts are mentioned as potential areas for future development.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Physical
Yusaku Matsui et al.
Summary: The study demonstrates a new method of fabricating Ta3N5 photoanodes using evaporated TaF5 as the source of tantalum. The as-synthesized Ta3N5 layers were uniformly deposited on different large-area substrates with columnar crystals, functioning as efficient active photoanodes for PEC water splitting. This approach could lead to high-quality Ta-based photoanodes over large areas, using insights gained from the precursor TaF5 for nitrides.
ACS APPLIED ENERGY MATERIALS
(2021)
Article
Nanoscience & Nanotechnology
Shengwu Wen et al.
Summary: In this study, AgBiS2 QDs were successfully synthesized as a near-infrared light-triggered bifunctional material for simultaneous photodynamic and photothermal antibacterial effects. The photodriven antibacterial activity of AgBiS2 QDs showed a significant reduction in bacterial survival against both S. aureus and E. coli, proposing a possible phototriggered antibacterial mechanism of inducing bacterial death through high local heat and ROS under single 808 nm NIR laser illumination.
ACS APPLIED MATERIALS & INTERFACES
(2021)
Article
Chemistry, Multidisciplinary
Yajun Zou et al.
Summary: The use of a free-standing and flow-through carbon nitride nanotube (CNN) membrane with a pore diameter of 40 nm for confined photocatalytic reactions has shown improved performance compared to bulk reactions, achieving a higher catalytic turnover frequency. This nanoconfined catalysis strategy allows for quantitatively assessing the photocatalytic performance in spatially isolated nanoreactors, providing crucial insights on catalysis in such environments and potentially gaining a fundamental understanding of complex chemical processes.
Article
Chemistry, Multidisciplinary
Fengliang Wang et al.
Summary: Solar-driven photocatalytic CO2 reduction is a promising approach for addressing the energy crisis and CO2 pollution. A newly developed photocatalyst shows high efficiency in CO2 reduction and introduces an amines oxidation reaction to further enhance the process.
ADVANCED MATERIALS
(2021)
Article
Chemistry, Physical
Erhuan Zhang et al.
Summary: The study successfully constructed CdS@ZnIn2S4 hierarchical hollow photocatalysts with a highly efficient direct Z-scheme system, enabling the conversion of pure water into H2 and H2O2. This work provides an effective approach for building efficient sulfide-only photocatalysts.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2021)
Article
Chemistry, Physical
Huanan Zhao et al.
Summary: NH2-MIL-53(Al)/CdS p-n heterojunctions were fabricated using a simple two-step hydrothermal method, showing high photocatalytic efficiency for Cr(VI) reduction and trichlorophenol removal under visible light irradiation. The efficient charge transfer and spatial charge separation in the heterojunctions, along with the unique mesoporous structure, contribute to the excellent photocatalytic activity.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2021)
Article
Engineering, Environmental
Yan Zhang et al.
Summary: Fabrication of weavable CF/TiO2/BiOI bundles on carbon fiber allows for strong and broad-spectrum photoabsorption, leading to superior adsorption and photodegradation efficiency for various pollutants. The reusable macroscopic photocatalyst retains excellent photocatalytic activity even after multiple cycles, showing potential for environmental purification applications.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Engineering, Environmental
Seyed Majid Ghoreishian et al.
Summary: The study successfully developed a ternary heterostructure photocatalyst using a hydrothermal approach, in which the optimal composition of CdS and RGO showed excellent photo-reduction of Cr(VI) under simulated solar-light irradiation. The enhanced photocatalytic activity of the ternary composite was mainly attributed to the formation of heterostructure, synergistic behavior, efficient interfacial charge transfer, and full-spectrum light absorption.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Multidisciplinary
Jiadong Xiao et al.
Summary: This study demonstrates the synthesis of Ta3N5:Mg+Zr nanoparticles with significantly enhanced photocatalytic water reduction activity under visible light. A coherent picture of the relations between defect species, surface properties, charge carrier dynamics, and photocatalytic activities was drawn, highlighting the importance and feasibility of improving multiple properties of a catalytic material via a one-step strategy.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY
(2021)
Review
Chemistry, Multidisciplinary
Qiaohong Zhu et al.
Summary: This review summarizes recent advances in high-performance cocatalysts based on g-C3N4 towards hydrogen evolution reaction (HER), discussing the functions, design principles, classifications, modification strategies of cocatalysts, and their intrinsic mechanisms for enhancing photocatalytic HER activity. Furthermore, the pivotal challenges and future developments of cocatalysts in the field of HER are also proposed.
Article
Chemistry, Physical
Qiang Wang et al.
Summary: The study introduced a novel integrated photoanode to enhance solar energy conversion efficiency and stabilize PEC water-splitting performance. By replacing WOR with GOR, nearly 100% Faradaic efficiency was achieved for the green energy conversion.
Review
Engineering, Multidisciplinary
Yun Zheng et al.
Summary: Black phosphorus (BP) has been widely used in semiconductor photocatalysis due to its high hole mobility and adjustable bandgap. Constructing heterostructured photocatalysts based on BP has become a research hotspot in recent years, leading to improved photoexcited charge-separation efficiency.
Article
Energy & Fuels
Khaled Alkanad et al.
Summary: Switching between different charge transport pathways and redox potentials in a Bi2S3/TiO2/MoS2 heterostructure has been achieved by regulating the light wavelength. This switchable feature results in the reduction of CO2 molecules to different products under different irradiation conditions.
Review
Chemistry, Physical
Priyanka Verma et al.
Summary: Porous materials with diverse structures, tailorable functionalities, and large surface areas have attracted significant attention in materials science, chemistry, and interdisciplinary research. The hybridization of nanoparticles and metal complexes with various porous nanostructures has led to advancements in surface engineering chemistry for solar energy conversion and environmental remediation. Understanding the advantages and disadvantages of porous materials in photocatalysis can guide future research to overcome current challenges and inspire further studies in this rapidly evolving field.
CATALYSIS REVIEWS-SCIENCE AND ENGINEERING
(2021)
Article
Chemistry, Multidisciplinary
Vikas Nandal et al.
Summary: Tantalum nitride (Ta3N5) shows potential as a visible-light-responsive semiconductor for commercial solar-to-hydrogen (STH) conversion, but efforts to improve the efficiency of its photoanodes are crucial. A detailed numerical model has been developed based on in-depth analysis of performance characteristics, facilitating predictions of various performance loss factors and design principles for efficient Ta3N5-NRs photoanodes.
ENERGY & ENVIRONMENTAL SCIENCE
(2021)
Article
Chemistry, Physical
Virgil Andrei et al.
Article
Chemistry, Multidisciplinary
Pengfei Xia et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2020)
Article
Multidisciplinary Sciences
Lun Pan et al.
NATURE COMMUNICATIONS
(2020)
Article
Chemistry, Multidisciplinary
Chansol Kim et al.
Review
Chemistry, Multidisciplinary
Chao Gao et al.
Article
Chemistry, Physical
Michele Melchionna et al.
Article
Chemistry, Physical
Yuriy Pihosh et al.
ACS ENERGY LETTERS
(2020)
Article
Engineering, Environmental
Haohan Yang et al.
JOURNAL OF HAZARDOUS MATERIALS
(2020)
Editorial Material
Multidisciplinary Sciences
Li-Hua Chen et al.
NATIONAL SCIENCE REVIEW
(2020)
Article
Engineering, Environmental
Shijie Li et al.
CHEMICAL ENGINEERING JOURNAL
(2020)
Article
Chemistry, Physical
Bo Niu et al.
JOURNAL OF CATALYSIS
(2019)
Article
Chemistry, Multidisciplinary
Hai-Lei Cao et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2019)
Article
Chemistry, Multidisciplinary
Yongchao Huang et al.
ADVANCED FUNCTIONAL MATERIALS
(2019)
Review
Chemistry, Multidisciplinary
Georgios Giannakakis et al.
ACCOUNTS OF CHEMICAL RESEARCH
(2019)
Article
Chemistry, Inorganic & Nuclear
Lang Pei et al.
DALTON TRANSACTIONS
(2019)
Article
Physics, Multidisciplinary
Taifeng Wang et al.
JOURNAL OF PHYSICS COMMUNICATIONS
(2019)
Review
Chemistry, Multidisciplinary
Sundaram Chandrasekaran et al.
CHEMICAL SOCIETY REVIEWS
(2019)
Article
Chemistry, Physical
Chenguang Zhou et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2018)
Article
Chemistry, Inorganic & Nuclear
Yinhua Jiang et al.
DALTON TRANSACTIONS
(2018)
Article
Chemistry, Physical
Tae Hwa Jeon et al.
Article
Chemistry, Physical
Bo Wang et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2017)
Article
Chemistry, Physical
Na Qin et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2017)
Article
Chemistry, Multidisciplinary
Yanbo Li et al.
ADVANCED MATERIALS
(2013)
Article
Chemistry, Multidisciplinary
QH Zhang et al.