4.1 Article

Boosting the capacitance of MOF-derived carbon-based supercapacitors by redox-active bromide ions

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Biomimetic platinum forest enables 3D micro-supercapacitors with enhanced areal performance

Panpan Zhang et al.

Summary: The rapid development of portable micro-electronics has led to an increasing demand for efficient micropower sources, specifically micro-supercapacitors (MSCs). However, the performance of MSCs is hindered by dense electrode designs that limit ion diffusion and charge transfer pathways. Inspired by natural forest structures, researchers have fabricated a biomimetic Pt forest as a conductive current collector, which significantly improves the active surface area of the electrode materials. MSCs based on this design exhibit enhanced capacitance and rate capability, suggesting a new approach for advanced electrode nanoarchitectures.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Environmental

Two-dimensional redox polydopamine with in-plane cylindrical mesochannels on graphene for high-energy and high-power lithium-ion capacitors

Siqi Jiang et al.

Summary: In this study, a new type of lithium-ion capacitor (LIC) was developed to meet the demands of high energy and high power. By controlling porosity and morphology, two 2D electrode materials were constructed, significantly improving the capacity and rate performance of the LIC. The experimental results showed that this design achieved a high energy density of 208 Wh kg(-1) and a high power density of 176 W kg(-1).

CHEMICAL ENGINEERING JOURNAL (2023)

Article Electrochemistry

Hydrogenated V2O5 with fast Zn-ion migration kinetics as high-performance cathode material for aqueous zinc-ion batteries

Liu Liu et al.

Summary: Based on first-principles calculations, this paper proposes hydrogenated V2O5 (HV2O5) nanospheres as a high capacity cathode for aqueous rechargeable Zinc-ion batteries. The electrostatic interaction and Zn-ion diffusion energy barrier in V2O5 are effectively reduced after hydrogenation. The experimental results demonstrate that HV2O5 exhibits high peak capacities, high rate capacity, and excellent cycle lifespan. Furthermore, the mechanism of ions-diffusion in different charge and discharge states is studied, indicating the dual-ion energy storage mechanism of HV2O5 attracting both Zn ions and H ions during discharging.

ELECTROCHIMICA ACTA (2023)

Article Chemistry, Multidisciplinary

Long-Life Aqueous Zn-I2 Battery Enabled by a Low-Cost Multifunctional Zeolite Membrane Separator

Zhengang Li et al.

Summary: The research team developed a membrane material using zeolite molecular sieve to effectively control the diffusion of soluble iodide in zinc iodide batteries. The membrane improved the Coulombic efficiency and reversibility of the battery, while also restraining self-discharge and zinc corrosion. Furthermore, the battery showed excellent cycling stability.

NANO LETTERS (2022)

Article Materials Science, Multidisciplinary

An aqueous rechargeable zinc-ion battery on basis of an organic pigment

Feng Yu et al.

RARE METALS (2022)

Review Chemistry, Applied

Different surface modification methods and coating materials of zinc metal anode

Feng Tao et al.

Summary: Rechargeable aqueous Zn-ion batteries (AZIBs) show great promise for large-scale energy storage due to their high specific capacity, eco-friendliness, low cost, and high safety. However, zinc metal anodes face challenges such as dendrite growth and side reactions, which can be addressed through surface modification strategies to improve their electrochemical performance.

JOURNAL OF ENERGY CHEMISTRY (2022)

Article Chemistry, Multidisciplinary

Three Birds with One Stone: Tetramethylurea as Electrolyte Additive for Highly Reversible Zn-Metal Anode

Jianghong Yang et al.

Summary: In this study, a high donor number solvent, tetramethylurea (TMU), was introduced as an additive in the electrolyte to enable a highly reversible zinc metal anode. The TMU effectively inhibited zinc corrosion and suppressed parasitic reactions, reduced water activity, and facilitated rapid zinc ion transport, resulting in stable zinc plating/stripping cycling and long battery lifetime.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

In-MOF-Derived Hierarchically Hollow Carbon Nanostraws for Advanced Zinc-Iodine Batteries

Lulu Chai et al.

Summary: In this study, a type of porous hollow carbon nanostraw (HCNS) was synthesized by combining the fusion and removal of indium within the decarboxylation process. The HCNS exhibited more charge active sites and short and quick electron and ion transport pathways, making it an excellent carrier for electrochemically active species. The assembled zinc-iodine batteries (ZIBs) using HCNS as a cathode material showed high capacity and improved rate and cycle performance, making HCNS an ideal material for high-performance batteries.

ADVANCED SCIENCE (2022)

Review Crystallography

Conductive Covalent Organic Frameworks Meet Micro-Electrical Energy Storage: Mechanism, Synthesis and Applications-A Review

Chengfei Qian et al.

Summary: Conductive covalent organic frameworks (c-COFs) have great potential in electrochemical energy storage due to their adjustable porosity and fast carrier migration requirements. However, challenges such as electron conduction blockage and underutilization of internal active sites need to be addressed to fully utilize their capabilities in micro-electrochemical energy storages. Research on enhancing conductivity has been conducted to overcome these obstacles.

CRYSTALS (2022)

Review Crystallography

Supercapacitors of Nanocrystalline Covalent Organic Frameworks-A Review

Jingjie Xia et al.

Summary: Due to their highly changeable porosity and adaptable skeletons, covalent organic frameworks (COFs) have been frequently used in supercapacitors. However, the application of COFs has been limited by the primary organic component preventing electron conduction and the challenge of fully utilizing interior active sites. Therefore, enhancing the conductivity of COFs is a crucial research direction to overcome these limitations.

CRYSTALS (2022)

Article Crystallography

A New High-Current Electrochemical Capacitor Using MnO2-Coated Vapor-Grown Carbon Fibers

Yu Liu et al.

Summary: Composites of vertically grown MnO2 nanosheet arrays on the surface of VGCFs are fabricated through a low-temperature redox reaction. An assembled electrochemical capacitor with AC/0.5 M K2SO4/MnO2@VGCF exhibits higher specific capacitance and better rate capability at fast-current density compared to the standalone MnO2 capacitor prepared by hydrothermal method. Electrochemical tests reveal that VGCFs act as a conducting matrix, effectively improving the conductivity of MnO2 nanosheets during cycling.

CRYSTALS (2022)

Article Engineering, Environmental

Carbon-based elastic foams supported redox-active covalent organic frameworks for flexible supercapacitors

Yanying Dong et al.

Summary: A COF/carbon composite foam is designed by implanting COF crystallites on the carbon network via Schiff base reaction, delivering a structure with high capacitance and long cycling stability when used as self-supported electrodes. This elastic and robust composite foam shows great potential for wearable devices, demonstrating excellent capacitive stability even under severe compressing or bending deformation.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Multidisciplinary

Preparation of mulberry-like RuO2 electrode material for supercapacitors

Feng Yu et al.

Summary: In this study, a mulberry-like RuO2 electrode material with large specific surface area was successfully synthesized via a hydrothermal method. The electrochemical characterization demonstrated that RuO2 exhibited a high specific capacitance of 400 F.g(-1) at a current density of 0.2 A.g(-1) and retained 84.7% capacitance after 6000 charge/discharge cycles at a current density of 10 A.g(-1). The energy and power densities of the RuO2-AC supercapacitor ranged from 25.0 to 11.7 Wh.kg(-1) and 160 to 10,560 W.kg(-1) at different current densities.

RARE METALS (2021)

Article Materials Science, Ceramics

Fe3O4 nanomaterials: synthesis, optical and electrochemical properties

Amaini Chouchaine et al.

Summary: Magnetite Fe3O4 nanoparticles were synthesized using a hydrothermal process with SDS and CTAB as surfactants, showing improved electrochemical performance for advanced electrodes in Li/Na-ion batteries and supercapacitors. The Fe3O4/SDS hybrids exhibited stable specific discharge capacitance after 500 charge/discharge cycles, indicating potential for practical applications. The enhanced performance of Fe3O4/SDS may be attributed to particle size and shape effects.

JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY (2021)

Article Chemistry, Multidisciplinary

Low-Crystalline Akhtenskite MnO2-Based Aqueous Magnesium-Ion Hybrid Supercapacitors with a Superior Energy Density Boosted by Redox Bromide-Ion Additive Electrolytes

Lu Han et al.

Summary: The newly designed redox bromide-ion additive aqueous MHS (B-MHS) shows higher specific capacity and energy density compared to traditional MHS, thanks to the introduction of Br-3(-)/Br- redox additive. This study investigates the energy storage mechanism and interactive correlation between magnesium ion insertion/extraction and redox reaction in detail.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Chemistry, Physical

Aqueous alkaline-acid hybrid electrolyte for zinc-bromine battery with 3V voltage window

Feng Yu et al.

ENERGY STORAGE MATERIALS (2019)

Review Chemistry, Analytical

Preparation and applications of monolithic structures containing metal-organic frameworks

Yongqin Lv et al.

JOURNAL OF SEPARATION SCIENCE (2017)