4.6 Article

Oxygen redox and instability in energy ceramics

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Stalling oxygen evolution in high-voltage cathodes by lanthurization

Mingzhi Cai et al.

Summary: This study develops a theory to address the oxygen loss and degradation of high-energy-density cathodes in lithium-ion batteries, and proposes a lantharizing process to regulate the near-surface structure of energy materials. Surface passivation, suppressed degradation, and improved electrochemical performance are demonstrated using LiCoO2 as an example. The high-voltage cycling stability has been greatly enhanced, up to 4.8 V versus Li+/Li, including in practical pouch-type full cells.

NATURE ENERGY (2023)

Review Chemistry, Multidisciplinary

Oxide Cathodes: Functions, Instabilities, Self Healing, and Degradation Mitigations

Yanhao Dong et al.

Summary: Recent progress has been made in high-energy-density oxide cathodes for lithium-ion batteries, but cycling under extreme conditions can lead to various forms of degradation that shorten battery life and cause safety issues. Understanding the underlying mechanisms of these degradations is critical for developing mitigation strategies. This systematic overview provides insights into the functions, instabilities, and materials behaviors of oxide cathodes, including unusual anion and cation mobilities and extensive lattice reconstructions. These insights are important for understanding self-healing phenomena and for designing and mitigating degradation in cathodes for high-performance energy storage.

CHEMICAL REVIEWS (2023)

Article Multidisciplinary Sciences

Capturing the swelling of solid-electrolyte interphase in lithium metal batteries

Zewen Zhang et al.

Summary: Characterizing liquid-solid interfaces remains challenging due to the limitations of existing tools. This study adopts a thin film vitrification method to preserve and study the structure and chemistry of key interfaces in batteries. The research reveals substantial swelling of the solid-electrolyte interphase (SEI) on lithium metal anodes in different electrolytes, with the swelling behavior correlated to battery performance.

SCIENCE (2022)

Review Nanoscience & Nanotechnology

Pushing the limit of 3d transition metal-based layered oxides that use both cation and anion redox for energy storage

Minghao Zhang et al.

Summary: This Review discusses the potential of layered oxide compounds with anion redox as positive electrode materials for next-generation Li-ion batteries. It outlines the mechanisms of anion redox and emphasizes the impact of structural changes on electrochemical performance. The importance of an integrated approach combining characterization and computation for studying the evolution of bulk structure and electrode-electrolyte interphase is highlighted.

NATURE REVIEWS MATERIALS (2022)

Article Materials Science, Multidisciplinary

Enhanced mobility of cations and anions in the redox state: The polaronium mechanism

Yanhao Dong et al.

Summary: A polaronium mechanism is proposed to explain the enhanced slow-ion diffusivity observed under extreme redox conditions. The mechanism involves the formation of a transient complex between a polaronic electron or hole and a migrating counterion, which becomes highly mobile under specific conditions. The complex is favored by an electron-phonon interaction and can dissolve after ion migration, allowing for repeated enhancement of ion migration.

ACTA MATERIALIA (2022)

Article Multidisciplinary Sciences

Revitalizing interface in protonic ceramic cells by acid etch

Wenjuan Bian et al.

Summary: Researchers improved the electrochemical performance and stability of protonic ceramic fuel cells by acid treatment, enabling exceptional performance at lower temperatures.

NATURE (2022)

Article Chemistry, Physical

Transverse and Longitudinal Degradations in Ceramic Solid Electrolytes

Yanhao Dong et al.

Summary: This article discusses the application of ceramic solid electrolytes in electrochemical devices, as well as the degradation phenomena in both transverse and longitudinal modes, and the reasons behind these phenomena. Strategies for improving material design to mitigate degradation are also proposed.

CHEMISTRY OF MATERIALS (2022)

Article Chemistry, Physical

Functionality of the Cathode-Electrolyte Interlayer in Protonic Solid Oxide Fuel Cells

Katsuya Akimoto et al.

Summary: This study found that adding functional layers between the electrolyte and cathode in solid oxide fuel cells can significantly reduce the cathodic reaction resistance. By using a functional layer, the cathode reaction area can be increased and the resistance can be decreased, resulting in higher power densities for the cells.

ACS APPLIED ENERGY MATERIALS (2022)

Article Energy & Fuels

Reactive boride infusion stabilizes Ni-rich cathodes for lithium-ion batteries

Moonsu Yoon et al.

Summary: The use of engineered polycrystalline electrodes in lithium-ion batteries is crucial for cycling stability and safety, but achieving high-quality coatings at both the primary and secondary particle levels can be challenging. A coating-and-infusion approach using cobalt boride metallic glass on a Ni-rich layered cathode has been shown to significantly enhance performance, including rate capability and cycling stability under various conditions. The success of this approach is attributed to the simultaneous suppression of microstructural degradation and side reactions, as well as the critical role of strong selective interfacial bonding in ensuring uniform reactive wetting and facilitating infusion.

NATURE ENERGY (2021)

Article Energy & Fuels

Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte

Weijiang Xue et al.

Summary: The authors have developed a sulfonamide-based electrolyte that allows for stable cycling of LiNi0.8Co0.1Mn0.1O2 in lithium metal batteries at a cutoff voltage of 4.7 V, achieving a specific capacity >230 mA h g(-1) and an average Coulombic efficiency >99.65% over 100 cycles. The 4.7 V lithium-metal battery can retain >88% capacity for 90 cycles even under harsh testing conditions, advancing practical lithium-metal batteries.

NATURE ENERGY (2021)

Article Electrochemistry

On the Thermodynamic Origin of the Formation of Li-Dendrites in an Electrochemical Cell

Yudong Wang et al.

Summary: The growth direction of neutral species differs significantly between batteries and electrolyzers. Factors such as ionic conductivity, SEI layer thickness, and electronic conductivity influence the formation of dendrites during lithium deposition.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Multidisciplinary

Shaping the Contact between Li Metal Anode and Solid-State Electrolytes

Jian Duan et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Multidisciplinary Sciences

Charge distribution guided by grain crystallographic orientations in polycrystalline battery materials

Zhengrui Xu et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Physical

The Role of Secondary Particle Structures in Surface Phase Transitions of Ni-Rich Cathodes

Lianfeng Zou et al.

CHEMISTRY OF MATERIALS (2020)

Review Multidisciplinary Sciences

A reflection on lithium-ion battery cathode chemistry

Arumugam Manthiram

NATURE COMMUNICATIONS (2020)

Review Chemistry, Multidisciplinary

Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries

Thorben Krauskopf et al.

CHEMICAL REVIEWS (2020)

Review Multidisciplinary Sciences

Recent advances in solid oxide cell technology for electrolysis

A. Hauch et al.

SCIENCE (2020)

Article Nanoscience & Nanotechnology

Guidelines for All-Solid-State Battery Design and Electrode Buffer Layers Based on Chemical Potential Profile Calculation

Takashi Nakamura et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Chemistry, Physical

What Triggers Oxygen Loss in Oxygen Redox Cathode Materials?

Robert A. House et al.

CHEMISTRY OF MATERIALS (2019)

Article Nanoscience & Nanotechnology

Injection of oxygen vacancies in the bulk lattice of layered cathodes

Pengfei Yan et al.

NATURE NANOTECHNOLOGY (2019)

Article Multidisciplinary Sciences

Lattice doping regulated interfacial reactions in cathode for enhanced cycling stability

Lianfeng Zou et al.

NATURE COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

Conditions for stable operation of solid oxide electrolysis cells: oxygen electrode effects

Beom-Kyeong Park et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Electrochemistry

Modeling of Oxygen Chemical Potential Distribution in Solid Oxide Electrolyzer Cells

Lei Zhang et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Materials Science, Multidisciplinary

Oxygen potential transition in mixed conducting oxide electrolyte

Yanhao Dong et al.

ACTA MATERIALIA (2018)

Article Multidisciplinary Sciences

Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells

Chuancheng Duan et al.

NATURE (2018)

Article Materials Science, Ceramics

Electrical and hydrogen reduction enhances kinetics in doped zirconia and ceria: I. grain growth study

Yanhao Dong et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2017)

Article Chemistry, Physical

Negating interfacial impedance in garnet-based solid-state Li metal batteries

Xiaogang Han et al.

NATURE MATERIALS (2017)

Review Electrochemistry

Review-SEI: Past, Present and Future

E. Peled et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Article Chemistry, Multidisciplinary

Intergranular Cracking as a Major Cause of Long-Term Capacity Fading of Layered Cathodes

Hao Liu et al.

NANO LETTERS (2017)

Article Multidisciplinary Sciences

Readily processed protonic ceramic fuel cells with high performance at low temperatures

Chuancheng Duan et al.

SCIENCE (2015)

Article Chemistry, Physical

Eliminating degradation in solid oxide electrochemical cells by reversible operation

Christopher Graves et al.

NATURE MATERIALS (2015)

Article Chemistry, Physical

Degradation phenomena in a solid oxide electrolysis cell after 9000 h of operation

F. Tietz et al.

JOURNAL OF POWER SOURCES (2013)

Article Chemistry, Multidisciplinary

Understanding Chemical Expansion in Non-Stoichiometric Oxides: Ceria and Zirconia Case Studies

Dario Marrocchelli et al.

ADVANCED FUNCTIONAL MATERIALS (2012)

Article Chemistry, Physical

Nanostructured high-energy cathode materials for advanced lithium batteries

Yang-Kook Sun et al.

NATURE MATERIALS (2012)

Article Physics, Applied

First-principles study on migration mechanism in SrTiO3

Teruyasu Mizoguchi et al.

APPLIED PHYSICS LETTERS (2011)

Review Multidisciplinary Sciences

Lowering the Temperature of Solid Oxide Fuel Cells

Eric D. Wachsman et al.

SCIENCE (2011)

Article Chemistry, Physical

Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells

Anil V. Virkar

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Article Electrochemistry

LiNbO3-coated LiCoO2 as cathode material for all solid-state lithium secondary batteries

Narumi Ohta et al.

ELECTROCHEMISTRY COMMUNICATIONS (2007)

Article Chemistry, Physical

Partial electronic conductivity and electrolytic domain of La0.9Sr0.1Ga0.8Mg0.2O3-δ

JH Kim et al.

SOLID STATE IONICS (2001)