☆ 4.0 Article

Real-Time Cutting Temperature Measurement in Turning of AISI 1045 Steel through an Embedded Thermocouple-A Comparative Study with Infrared Thermography

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

WC-Co/316L stainless steel joining by laser powder bed fusion for multi-material cutting tools manufacturing

B. Guimaraes et al.

Summary: A novel approach using laser powder bed fusion technology was proposed to additively manufacture 316L stainless steel on a WC-Co substrate, obtaining complex multi-material cutting tools. Results showed a good bonding between materials with a dense and well-defined interface capable of withstanding cutting forces. The hardness of the stainless steel was found to be directly correlated with the energy density used during laser powder bed fusion. This method proved effective in producing multi-material WC-Co/316L stainless steel cutting tools with good metallurgical bonding and mechanical strength, without the need for an interfacial material.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2023)

Add to Collection

Article Chemistry, Physical

Understanding drop spreading behaviour on WC-10wt%Co cutting tools-an experimental and numerical study

B. Guimaraes et al.

Summary: The spreading behavior of machining cutting fluid and water on WC-Co cutting tools was studied, with experimental measurement of contact angles and numerical simulations. It was found that machining cutting fluid has a shorter spreading time and larger drop radius compared to water. This study contributes to the understanding of drop spreading behavior on WC-Co cutting tools and provides important numerical models for predicting and improving the lubrication and heat removal capacity of cutting tools.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Add to Collection

Review Automation & Control Systems

Cutting temperature measurement and prediction in machining processes: comprehensive review and future perspectives

Bruno Miguel Pereira Guimaraes et al.

Summary: During machining processes, the generated heat due to plastic deformation in a small area of the cutting tool plays a significant role in determining chip formation mechanisms, tool wear, tool life, and workpiece surface integrity and quality. This paper provides a comprehensive review of various methods for measuring and predicting temperatures in machining processes, evaluating their merits and demerits. The choice of the most suitable method depends on factors such as cost, size, shape, accuracy, response time, and temperature range. Additionally, this paper outlines future prospects for real-time cutting temperature monitoring in the context of Industry 4.0 and 5.0, and introduces the concept of smart cutting tools capable of measuring and controlling cutting temperature.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Influence of Micro-Textures on Cutting Insert Heat Dissipation

Jose Rosas et al.

Summary: Metal machining is a critical manufacturing process that has undergone continuous development to improve tool performance and reduce cutting forces, friction, and heat generation. Cooling systems and surface texturing have emerged as effective solutions to remove excessive heat and enhance tool performance. However, there is a lack of scientific data on how surface texturing reduces tool temperature and its underlying mechanisms. This study proposes an experimental setup to investigate the impact of tool surface characteristics on heat transfer. The results show that introducing groove patterns on the cutting inserts can significantly increase heat transfer rate through increased contact area, enhanced fluid turbulence, and improved surface wettability.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Engineering, Industrial

Real-time tool wear monitoring using thin-film thermocouple

Tianxiang Li et al.

Summary: This paper presents a smart cutting tool embedded with thin-film thermocouple for real-time temperature monitoring in harsh cutting environments. The tool showed good sensitivity, dynamic response, and functional validity, and was able to reflect the progression of tool wear based on cutting temperature. The devised smart tool is useful for determining optimum cutting parameters and extending tool life.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Review Engineering, Mechanical

Tool coating effects on cutting temperature during metal cutting processes: Comprehensive review and future research directions

Jinfu Zhao et al.

Summary: This article reviews the effects of tool coatings on cutting temperature during metal cutting process, analyzing influencing factors, predictive modeling, and experimental measurements. Future directions for investigating the effects of tool coatings on cutting temperature are proposed for better selection and design of suitable tool coatings.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Chemistry, Physical

Boron Doped Diamond for Real-Time Wireless Cutting Temperature Monitoring of Diamond Coated Carbide Tools

Sergio Pratas et al.

Summary: The developments in cutting tools in the context of the fourth industrial revolution are increasingly focused on a holistic control of manufacturing processes. Diamond, especially boron-doped diamond coatings, are being used for their extreme hardness and thermal conductivity, as well as their auspicious sensing properties. Monitoring cutting temperature in real time is a challenge, but can be achieved through innovative solutions like the one-step approach of using thin diamond thermistors.

MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A Numerical-Experimental Study on Orthogonal Cutting of AISI 1045 Steel and Ti6Al4V Alloy: SPH and FEM Modeling with Newly Identified Friction Coefficients

Mohamadreza Afrasiabi et al.

Summary: Numerical simulation of metal cutting using SPH and FEM methods, validated by experimental cutting tests. A novel technique to measure rake face temperature without disrupting chip flow is introduced. Both SPH and FEM accurately predict thermal loads, with SPH showing higher errors in force prediction compared to FEM.

METALS (2021)

Add to Collection

Article Automation & Control Systems

Modeling and prediction of cutting temperature in the machining of H13 hard steel of multi-layer coated cutting tools

Jingjie Zhang et al.

Summary: This study investigates the impact of multi-layer coatings on cutting temperature in dry turning of H13 hardened steel, proposing new analytical models to estimate coating temperature and coating-substrate interface temperature. It is found that the multi-layer coating can be equivalent to a mono-layer composite coating, accurately estimating cutting temperature through a heat transfer model.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Engineering, Industrial

In-situ measurement of rake face temperatures in orthogonal cutting

J. Saelzer et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Review Automation & Control Systems

The heat partition into cutting tool at tool-chip contact interface during cutting process: a review

Guangchao Hao et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Automation & Control Systems

Effect of laser surface texturing on the wettability of WC-Co cutting tools

B. Guimaraes et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Engineering, Multidisciplinary

Using the temperature method for the prediction of tool life in sustainable production

Pavel Kovac et al.

MEASUREMENT (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Influences of TiAlN Coating on Cutting Temperature during Orthogonal Machining H13 Hardened Steel

Guangchao Hao et al.

COATINGS (2019)

Add to Collection

Article Automation & Control Systems

Development of a wireless system for milling temperature monitoring

Augusto F. V. Campidelli et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Manufacturing

Characterization of Tool-Chip Interface Temperature Measurement With Thermocouple Fabricated Directly on the Rake Face

Sinan Kesriklioglu et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)

Add to Collection

Article Materials Science, Ceramics

Investigation of high temperature electrical insulation property of MgO ceramic films and the influence of annealing process

Hao Liu et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Cutting tools embedded with thin film thermocouples vertically to the rake face for temperature measurement

Jindang Li et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Article Thermodynamics

Temperature assessment when milling AISI D2 cold work die steel using tool-chip thermocouple, implanted thermocouple and finite element simulation

Hugo Lima et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Automation & Control Systems

Smart-sensor for tool-breakage detection in milling process under dry and wet conditions based on infrared thermography

Juan A. Ramirez-Nunez et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Built-in thin film thermocouples in surface textures of cemented carbide tools for cutting temperature measurement

Jindang Li et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Add to Collection

Article Engineering, Mechanical

Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach

Amin Bagherzadeh et al.

TRIBOLOGY INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Magnesium Oxide Nanoparticles: Dielectric Properties, Surface Functionalization and Improvement of Epoxy-Based Composites Insulating Properties

Jaroslav Hornak et al.

NANOMATERIALS (2018)

Add to Collection

Article Thermodynamics

Determining tool/chip temperatures from thermography measurements in metal cutting

M. Saez-de-Buruaga et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Article Chemistry, Physical

Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools

Jinfu Zhao et al.

MATERIALS (2018)

Add to Collection

Article Engineering, Manufacturing

Machined surface temperature in hard turning

Lei Chen et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

Add to Collection

Article Engineering, Industrial

Infrared measurement of the temperature at the tool-chip interface while machining Ti-6Al-4V

J. C. Heigel et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)

Add to Collection

Review Engineering, Mechanical

Measurement and prediction of cutting temperatures during dry milling: review and discussions

N. L. Bhirud et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Experimental investigation of thermal aspects in a cutting tool using comsol and inverse problem

R. F. Brito et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Chemistry, Analytical

Thermocouple and Infrared Sensor-Based Measurement of Temperature Distribution in Metal Cutting

Abdil Kus et al.

SENSORS (2015)

Add to Collection

Article Automation & Control Systems

Influence of cutting speed on cutting force, flank temperature, and tool wear in end milling of Ti-6Al-4V alloy

Junzhan Hou et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Engineering, Manufacturing

Experimental study on cutting temperature and cutting force in dry turning of titanium alloy using a non-coated micro-grooved tool

J. Xie et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)

Add to Collection

Article Chemistry, Physical

Adhesion as an interplay between particle size and surface roughness

J. Katainen et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2006)

Add to Collection

Review Engineering, Manufacturing

Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining

N. A. Abukhshim et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)

Add to Collection

Review Engineering, Mechanical

A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology

R Komanduri et al.

TRIBOLOGY INTERNATIONAL (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.