☆ 3.8 Article

Assessing the Sorting Efficiency of Plastic Packaging Waste in an Italian Material Recovery Facility: Current and Upgraded Configuration

RECYCLING (2023)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

Sustainability assessment of municipal solid waste separate collection and treatment systems in a large metropolitan area

Giovanni Gadaleta et al.

Summary: Using a Multi-Criteria Decision Analysis method, this study evaluated and compared the sustainability of different waste management schemes, finding that the door-to-door system is the best solution in environmental and socio-technical terms, despite its higher cost. Interestingly, there is limited deviation between the mixed collection mode and the door-to-door system, suggesting strong competitiveness of the former.

SUSTAINABLE PRODUCTION AND CONSUMPTION (2022)

Add to Collection

Article Environmental Sciences

The role of (bio)degradability on the management of petrochemical and bio-based plastic waste

Sabino De Gisi et al.

Summary: This study aims to review the impact of plastic (bio)degradability on waste management systems, discussing the degradability of different types of plastics and strategies to improve it. However, these improvements are not always effective in the current waste management system, with incineration being the most feasible option. Therefore, further research in this area is needed.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

Add to Collection

Article Engineering, Environmental

The influence of bio-plastics for food packaging on combined anaerobic digestion and composting treatment of organic municipal waste

Giovanni Gadaleta et al.

Summary: The study assessed the influence of bio-based plastic films on anaerobic digestion and composting processes. It found that anaerobic digestion contributed to the disintegration of the bio-plastic material, while aerobic treatment was ineffective. The presence of cellulose acetate increased methane yield. The findings highlight the need to upgrade organic waste treatment plants and revise the requirements for compost use in agriculture.

WASTE MANAGEMENT (2022)

Add to Collection

Article Engineering, Environmental

Quality of recycling: Urgent and undefined

Davide Tonini et al.

Summary: Quality of recycling is a concept that lacks a clear definition and operational framework. This lack of clarity hinders the development of effective recycling and circular economy policies. This article reviews existing studies, synthesizes different approaches, and suggests a way forward for research to support circular economy policy measures and monitoring. The definition of recycling quality should consider the technical characteristics of the recyclate and its suitability for different end applications. Preserving functionality through functional recycling is crucial for resource substitution in the circular economy.

WASTE MANAGEMENT (2022)

Add to Collection

Article Environmental Sciences

Effects of cellulose-based bio-plastics on the aerobic biological stabilization treatment of mixed municipal solid waste: A lab-scale assessment

Giovanni Gadaleta et al.

Summary: The aim of this study was to evaluate the impact of cellulose-based bio-plastics on the biological stabilization of mixed municipal solid waste. The results showed that the presence of cellulose-based bio-plastics did not significantly affect the temperature, oxygen consumption, and carbon dioxide production of the waste mixture. Additionally, the disintegration rate of the bio-plastics remained stable over time. These findings suggest that cellulose-based bio-plastics can be effectively managed for energy recovery purposes.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

Add to Collection

Review Engineering, Environmental

A REVIEW OF RECENT TRENDS TO INCREASE THE SHARE OF POST-CONSUMER PACKAGING WASTE TO RECYCLING IN EUROPE

Jakob Lederer et al.

Summary: By reviewing case studies from recent literature, this study contributes to addressing the question of how to increase recycling rates to achieve a circular economy. However, more information and case studies are still needed.

DETRITUS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Carbon Footprint and Total Cost Evaluation of Different Bio-Plastics Waste Treatment Strategies

Giovanni Gadaleta et al.

Summary: To address the problem of fossil-based pollution, bio-plastics have been increasingly used in various applications. However, the current waste management system has weaknesses in dealing with bio-plastic waste (BPW), and there is a lack of quantitative data. This study combines environmental and economic assessments to determine the most sustainable and suitable treatment for BPW. The results show that the organic, plastic, and mixed waste treatment routes have different costs and carbon footprints. Additionally, the study highlights the importance of improving waste treatment processes to ensure the quality of the output.

CLEAN TECHNOLOGIES (2022)

Add to Collection

Review Environmental Sciences

Characteristics of Plastic Pollution in the Environment: A Review

Penghui Li et al.

Summary: Plastics have become a ubiquitous presence in the environment, attracting significant attention in academic research. This paper reviews the major characteristics of plastic pollution, emphasizing diversity, persistence, global issues, combined pollution, and threats to organisms and human health. The discussions also include the plastic cycle in aquatic, atmospheric, and terrestrial systems, highlighting current challenges and recommending future research trends in tackling plastic pollution.

BULLETIN OF ENVIRONMENTAL CONTAMINATION AND TOXICOLOGY (2021)

Add to Collection

Review Agricultural Engineering

The role of waste management in reducing bioplastics' leakage into the environment: A review

Mirko Cucina et al.

Summary: Bioplastics are increasingly being used as substitutes for petroleum-derived plastics due to their biodegradability, however, concerns arise over incomplete degradation and leakage into the environment during waste management processes. This paper reviews literature on the biodegradation of bioplastics in industrial and natural environments, and discusses the potential role of waste management processes in reducing bioplastics leakage.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Design, implementation and assessment of a more sustainable model to manage plastic waste at sport events

Augusto Bianchini et al.

Summary: This paper proposes a new model for managing plastic waste at marathons, aiming to improve waste management and sustainability. Through precise quantitative methods and comparison of key performance indicators, the superior sustainability performance of this new model is demonstrated.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Agricultural Engineering

Anaerobic co-digestion of bioplastics as a sustainable mode of waste management with improved energy production - A review

Amith Abraham et al.

Summary: The world of bioplastics has rapidly expanded, generating new waste streams that pose challenges to waste processing; anaerobic co-digestion is considered the best option for efficient bioplastic waste processing with reduced space requirements and environmental pollution; the higher C/N ratio of bioplastics presents a challenge to anaerobic digestion, but co-digestion with lower C/N ratio biowastes can improve biogas production.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Development and application of a predictive modelling approach for household packaging waste flows in sorting facilities

Kerstin Kleinhans et al.

Summary: This paper introduces the operation and performance evaluation method of household packaging waste sorting facilities, and demonstrates the flexibility and predictive capability of the model through model validation and sensitivity analysis.

WASTE MANAGEMENT (2021)

Add to Collection

Article Engineering, Environmental

Recycling of post-consumer plastic packaging waste in the EU: Recovery rates, material flows, and barriers

Ioannis Antonopoulos et al.

Summary: The study focuses on strategies to increase plastic waste recycling rates in Europe and identifies challenges in the current processing systems and potential improvements. By collecting data and conducting analysis, the research highlights key issues to be addressed and possible pathways for improvement in the future.

WASTE MANAGEMENT (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Circularity Study on PET Bottle-To-Bottle Recycling

Elisabeth Pinter et al.

Summary: The study found that the quality of rPET material was not adversely affected after multiple recycling loops, indicating that a closed loop PET bottle recycling process using up to 75% rPET content can be sustained without compromising quality.

SUSTAINABILITY (2021)

Add to Collection

Article Engineering, Environmental

Outlining a comprehensive techno-economic approach to evaluate the performance of an advanced sorting plant for plastic waste recovery

Giovanni Gadaleta et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2020)

Add to Collection

Article Engineering, Environmental

Management of aluminium packaging waste in selected European countries

R. Warrings et al.

WASTE MANAGEMENT & RESEARCH (2019)

Add to Collection

Article Engineering, Environmental

Plastic waste from recycling centres: Characterisation and evaluation of plastic recyclability

Giorgia Faraca et al.

WASTE MANAGEMENT (2019)

Add to Collection

Article Engineering, Environmental

The impact of collection portfolio expansion on key performance indicators of the Dutch recycling system for Post-Consumer Plastic Packaging Waste, a comparison between 2014 and 2017

Marieke Brouwer et al.

WASTE MANAGEMENT (2019)

Add to Collection

Article Environmental Sciences

Greening MSW management systems by saving footprint: The contribution of the waste transportation

G. Peri et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)

Add to Collection

Article Engineering, Environmental

Classification of metallic and non-metallic fractions of e-waste using thermal imaging-based technique

Sathish Paulraj Gundupalli et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Add to Collection

Review Engineering, Environmental

Plastic flexible films waste management - A state of art review

O. Horodytska et al.

WASTE MANAGEMENT (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Impact of Bio-Based Plastics on Current Recycling of Plastics

Luc Alaerts et al.

SUSTAINABILITY (2018)

Add to Collection

Article Multidisciplinary Sciences

The Chinese import ban and its impact on global plastic waste trade

Amy L. Brooks et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Separate waste collection in Italy: the role of socio-cultural factors and targets set by law

Massimiliano Agovino et al.

ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY (2017)

Add to Collection

Article Engineering, Environmental

Evaluation of performance indicators applied to a material recovery facility fed by mixed packaging waste

Maria Laura Mastellone et al.

WASTE MANAGEMENT (2017)

Add to Collection

Article Engineering, Environmental

Mechanical and chemical recycling of solid plastic waste

Kim Ragaert et al.

WASTE MANAGEMENT (2017)

Add to Collection

Article Multidisciplinary Sciences

Production, use, and fate of all plastics ever made

Roland Geyer et al.

SCIENCE ADVANCES (2017)

Add to Collection

Review Environmental Sciences

Central sorting and recovery of MSW recyclable materials: A review of technological state-of-the-art, cases, practice and implications for materials recycling

Ciprian Cimpan et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2015)

Add to Collection

Article Engineering, Environmental

Environmental evaluation of plastic waste management scenarios

L. Rigamonti et al.

RESOURCES CONSERVATION AND RECYCLING (2014)

Add to Collection

Article Engineering, Environmental

Analysis of the quality of the recovered paper from commingled collection systems

Ruben Miranda et al.

RESOURCES CONSERVATION AND RECYCLING (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.