Related references
Note: Only part of the references are listed.Examination of failed retrieved temporomandibular joint (TMJ) implants
S. Kerwell et al.
ACTA BIOMATERIALIA (2016)
Production of a biofunctional titanium surface using plasma electrolytic oxidation and glow-discharge plasma for biomedical applications
Thamara Beline et al.
BIOINTERPHASES (2016)
Hydroxyapatite Titania nanotube composite as a coating layer on Co-Cr-based implants: Mechanical and electrochemical optimization
Mostafa Rezazadeh Shirdar et al.
CERAMICS INTERNATIONAL (2016)
Titanium: a review on exposure, release, penetration, allergy, epidemiology, and clinical reactivity
Simon W. Fage et al.
CONTACT DERMATITIS (2016)
Endothelialization and the bioactivity of Ca-P coatings of different Ca/P stoichiometry electrodeposited on the Nitinol superelastic alloy
M. R. Etminanfar et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Optimization of electrochemical step deposition for bioceramic hydroxyapatite coatings on CoCrMo implants
M. Ibrahim Coskun et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Production of a biofunctional titanium surface using plasma electrolytic oxidation and glow-discharge plasma for biomedical applications
Thamara Beline et al.
BIOINTERPHASES (2016)
A simple strategy to modify the porous structure of plasma electrolytic oxidation coatings on magnesium
T. S. N. Sankara Narayanan et al.
RSC ADVANCES (2016)
A Facile Method to Modify the Characteristics and Corrosion Behavior of 304 Stainless Steel by Surface Nanostructuring toward Biomedical Applications
Balusamy Thangaraj et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Reprint of: The history of biodegradable magnesium implants: A review
Frank Witte
Acta Biomaterialia (2015)
Surface medication of Ti-15Mo alloy by thermal oxidation: Evaluation of surface characteristics and corrosion resistance in Ringer's solution
Nithideth Somsanith et al.
APPLIED SURFACE SCIENCE (2015)
Evaluation of biodegradability of surface treated AZ91 magnesium alloy in SBF solution
D. Gopi et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)
Surface Nanocrystallization of EN8 Steel: Correlation of Change in Material Characteristics with Corrosion Behavior
T. Balusamy et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes
H. Attar et al.
MATERIALS LETTERS (2015)
Functionally graded HA-TiO2 nanostructured composite coating on Ti-6Al-4V substrate via electrophoretic deposition
Hamidreza Farnoush et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Mechanical properties and microstructure of powder metallurgy Ti-xNb-yMo alloys for implant materials
Keivan A. Nazari et al.
MATERIALS & DESIGN (2015)
Direct in vivo inflammatory cell-induced corrosion of CoCrMo alloy orthopedic implant surfaces
Jeremy L. Gilbert et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2015)
Potential release of in vivo trace metals from metallic medical implants in the human body: From ions to nanoparticles - A systematic analytical review
Henryk Matusiewicz
ACTA BIOMATERIALIA (2014)
Biodegradation performance of a chitosan coated magnesium-zinc-tricalcium phosphate composite as an implant
Jun Zhao et al.
BIOINTERPHASES (2014)
Spectrophotometric analysis to monitor the corrosion behaviour of magnesium during immersion corrosion testing: A suitable alternative to pH measurement?
S. Shanmugam et al.
CORROSION SCIENCE (2014)
Intergranular pitting corrosion of CoCrMo biomedical implant alloy
Pooja Panigrahi et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2014)
Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: Prospects and challenges
T. S. N. Sankara Narayanan et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Influence of surface mechanical attrition treatment (SMAT) on the corrosion behaviour of AISI 304 stainless steel
T. Balusamy et al.
CORROSION SCIENCE (2013)
Macrophages-Key cells in the response to wear debris from joint replacements
Christophe Nich et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
CoCrMo metal-on-metal hip replacements
Yifeng Liao et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)
Obesity and other modifiable factors for physical inactivity measured by accelerometer in adults with knee osteoarthritis
Jungwha Lee et al.
ARTHRITIS CARE & RESEARCH (2013)
Microstructure of Retrievals Made from Standard Cast HC-CoCrMo Alloys
Priska Stemmer et al.
METAL-ON-METAL TOTAL HIP REPLACEMENT DEVICES (2013)
Development of new metallic alloys for biomedical applications
Mitsuo Niinomi et al.
ACTA BIOMATERIALIA (2012)
Titania/hydroxyapatite bi-layer coating on Ti metal by electrophoretic deposition: Characterization and corrosion studies
Purna C. Rath et al.
CERAMICS INTERNATIONAL (2012)
Electrophoretic deposition of nanocomposite (HAp + TiO2) on titanium alloy for biomedical applications
L. Mohan et al.
CERAMICS INTERNATIONAL (2012)
The Peri-Implantitis: Implant Surfaces, Microstructure, and Physicochemical Aspects
Jaafar Mouhyi et al.
CLINICAL IMPLANT DENTISTRY AND RELATED RESEARCH (2012)
Stability of cp-Ti and Ti-6Al-4V alloy for dental implants as a function of saliva pH - an electrochemical study
Valentim A. R. Barao et al.
CLINICAL ORAL IMPLANTS RESEARCH (2012)
Influence of pH on the tribocorrosion behavior of CpTi in the oral environment: synergistic interactions of wear and corrosion
Mathew T. Mathew et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)
Comparison of the Norwegian Knee Arthroplasty Register and a United States Arthroplasty Registry
Elizabeth W Paxton et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2012)
Oral Mucosa Tissue Response to Titanium Cover Screws
Daniel G. Olmedo et al.
JOURNAL OF PERIODONTOLOGY (2012)
Effects of nanocrystalline calcium deficient hydroxyapatite incorporation in glass ionomer cements
Sumit Goenka et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
Fully covered removable nitinol self-expandable metal stents (SEMS) in malignant strictures of the esophagus: a multicenter analysis
Jayant P. Talreja et al.
SURGICAL ENDOSCOPY AND OTHER INTERVENTIONAL TECHNIQUES (2012)
Influence of Fe Content of Ti-Mn-Fe Alloys on Phase Constitution and Heat Treatment Behavior
M. Ikeda et al.
THERMEC 2011, PTS 1-4 (2012)
Solid, shape recovered Bulk nitinol: Part II-Mechanical properties
Anil Saigal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Introduction to corrosion of bioimplants
G. E. Novikova
PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES (2011)
Fretting corrosion behaviour of thermally oxidized CP-Ti in Ringer's solution
Satendra Kumar et al.
CORROSION SCIENCE (2010)
Microstructure and fatigue crack growth mechanisms in high temperature titanium alloys
Hamouda Ghonem
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Surface Modification of Titanium and Titanium Alloys by Ion Implantation
Tapash R. Rautray et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2010)
Survival and functional outcome after revision of a unicompartmental to a total knee replacement THE NEW ZEALAND NATIONAL JOINT REGISTRY
A. J. Pearse et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2010)
Thermal oxidation of Ti6Al4V alloy: Microstructural and electrochemical characterization
Satendra Kumar et al.
MATERIALS CHEMISTRY AND PHYSICS (2010)
Nanobioceramic coatings for biomedical applications
T. M. Sridhar
MATERIALS TECHNOLOGY (2010)
The effects of implant surface nanoscale features on osteoblast-specific gene expression
Gustavo Mendonca et al.
BIOMATERIALS (2009)
Future Young Patient Demand for Primary and Revision Joint Replacement: National Projections from 2010 to 2030
Steven M. Kurtz et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2009)
Electrochemical and structural evaluation of functionally graded bioglass-apatite composites electrophoretically deposited onto Ti6Al4V alloy
A. Balamurugan et al.
ELECTROCHIMICA ACTA (2009)
Ti based biomaterials, the ultimate choice for orthopaedic implants - A review
M. Geetha et al.
PROGRESS IN MATERIALS SCIENCE (2009)
Electrocrystallization of Hydroxyapatite and Its Dependence on Solution Conditions
Noam Eliaz et al.
CRYSTAL GROWTH & DESIGN (2008)
Suitability evaluation of sol-gel derived Si-substituted hydroxyapatite for dental and maxillofacial applications through in vitro osteoblasts response
A. Balamurugan et al.
DENTAL MATERIALS (2008)
Corrosion behaviour of Ti-15Mo alloy for dental implant applications
Satendra Kumar et al.
JOURNAL OF DENTISTRY (2008)
Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: Effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition
Onder Albayrak et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Anodized titanium and stainless steel in contact with CFRP: An electrochemical approach considering galvanic corrosion
Yves Mueller et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Corrosion resistance of titanium ion implanted AZ91 magnesium alloy
Chengiong Liu et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2007)
First biodegradable metal stent in a child with congenital heart disease: Evaluation of macro and histopathology
Peter Zartner et al.
CATHETERIZATION AND CARDIOVASCULAR INTERVENTIONS (2007)
Electrochemical impedance spectroscopic studies of titanium and its alloys in saline medium
S. Tamilselvi et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2007)
Hip implants - Paper VI - Ion concentrations
A. Sargeant et al.
MATERIALS & DESIGN (2007)
Corrosion rates of stainless steel under shear stress measured by a novel parallel-plate flow chamber
RLW Messer et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2006)
Electrochemical corrosion of metal implants
SP Patterson et al.
AMERICAN JOURNAL OF ROENTGENOLOGY (2005)
Comparison of metal release from various metallic biomaterials in vitro
Y Okazaki et al.
BIOMATERIALS (2005)
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
XY Liu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2004)
Low serum magnesium predicts neurological events in patients with advanced atherosclerosis
J Amighi et al.
STROKE (2004)
Biocompatibility of β-stabilizing elements of titanium alloys
E Eisenbarth et al.
BIOMATERIALS (2004)
Corrosion of bio implants
UK Mudali et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2003)
Biocorrosion of magnesium alloys: a new principle in cardiovascular implant technology?
B Heublein et al.
HEART (2003)
Preparation and characterisation of electrophoretically deposited hydroxyapatite coatings on type 316L stainless steel
TM Sridhar et al.
CORROSION SCIENCE (2003)
Recent research and development in titanium alloys for biomedical applications and healthcare goods
Mitsuo Niinomi
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2003)
Implant applications of highly corrosion-resistant Ti-15Zr-4Nb-4Ta alloy
Y Okazaki et al.
MATERIALS TRANSACTIONS (2002)
Fracture mechanisms of retrieved titanium screw thread in dental implant
K Yokoyama et al.
BIOMATERIALS (2002)
Corrosive behaviour of Amplatzer® devices in experimental and biological environments
HF Kong et al.
CARDIOLOGY IN THE YOUNG (2002)
Plasma-surface modification of biomaterials
PK Chu et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2002)
Focal osteolysis at the junctions of a modular stainless-steel femoral intramedullary nail
DM Jones et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2001)
Cutaneous metal sensitivity in patients with orthopaedic injuries
MF Swiontkowski et al.
JOURNAL OF ORTHOPAEDIC TRAUMA (2001)
Proliferation/differentiation of osteoblastic human alveolar bone cell cultures in the presence of stainless steel corrosion products
MA Costa et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2000)