Analysis of performance and emission patterns of novel biofuel feedstock neat coconut fatty acid distillate (CFAD) fuelled single-cylinder diesel engine

This study examined the potential of using coconut fatty acid distillate (CFAD), a by-product of the processing of edible oils, as a diesel engine fuel. The major novelty of this study is to assess the CFAD as a viable feedstock of biodiesel to address global energy demands. CFAD has not been specifically researched as a feedstock for producing biodiesel or as a fuel for diesel engines, despite the fact that numerous studies on the production and performance of biodiesel have already been conducted. Fourier transform infrared (FTIR) spectroscopy, gas chromatography (GC), and FTIR were used to analyze the fuel. According to the results of the GC test, CFAD oil contains 91.53% saturated fatty acids, compared with only 8.47% unsaturated fatty acids. High saturation values can be seen in myristic acid (16.92%) and lactic acid (45.33%). Longer hydrocarbon chain lengths indicate higher energy density and boiling point, which also indicate lesser volatility. At a frequency of 1708.54 cm(-1), CH stretching vibrations have been identified through FTIR investigation. The vibrations of CC stretching at 1465.47 cm(-1) indicate the presence of alkenes/fingerprint phase. The blends used for this investigation include 90% diesel with 10% CFAD (CFAD10), 80% diesel with 20% CFAD (CFAD20), 70% diesel with 30% CFAD (CFAD30), and 100% CFAD. The CFAD 10%, 20%, and 30% blends as well as the CFAD100 had brake thermal efficiency values of 27.24%, 26.23%, 24.88%, and 21.52%, correspondingly, at full load. The average increment in brake-specific energy consumption for CFAD10, CFAD20, CFAD30, and CFAD100 over diesel fuel was 8.23%, 10.88%, 13.77%, and 25.90%, respectively. The behavior of CFAD exhibits reduced cylinder pressure because of the large content of moderate saturated fatty acids in this substance. The net heat release rate (NHRR) and cylinder pressure have a similar relationship in that the NHRR increases with increasing diesel volume. In comparison to diesel, the CO emissions from the CFAD20, CFAD30, and CFAD100 blends increased by 10.79%, 16.66%, and 35.89% at maximum load, respectively. It has been reported that NOx is reduced more significantly the more CFAD is present in the mixture. The blend CFAD10 had the least amount of smoke. The high viscosity of the CFAD and its blends influences the fuel droplets range and the development of spray in the cylinder, which results in delayed combustion and higher unburned hydrocarbon emissions.

Automated summary

This study examined the potential of using CFAD as a diesel engine fuel and as a feedstock of biodiesel. The results showed that CFAD has high saturation values and reduced cylinder pressure, but it also leads to delayed combustion and higher emissions.