Related references
Note: Only part of the references are listed.Experimental Investigation into the Hole Quality in Ultrasonic Machining of WC-Co Composite
Ravinder Kataria et al.
MATERIALS AND MANUFACTURING PROCESSES (2015)
Surface Roughness of Poly-Crystalline Cubic Boron Nitride after Rotary Ultrasonic Machining
M. Kuruc et al.
25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014 (2015)
Chipping minimization in drilling ceramic materials with rotary ultrasonic machining
Jun Wei Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Fabrication of hybrid micro/nano-textured surfaces using rotary ultrasonic machining with one-point diamond tool
Shaolin Xu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Experimental studies on drilling tool load and machining quality of C/SiC composites in rotary ultrasonic machining
Kai Ding et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Comparison of drill wear mechanism between rotary ultrasonic elliptical machining and conventional drilling of CFRP
Daxi Geng et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Rotary ultrasonic machining of optical K9 glass using compressed air as coolant: A feasibility study
Chenglong Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
Rotary ultrasonic machining of CFRP: A mechanistic predictive model for cutting force
W. L. Cong et al.
ULTRASONICS (2014)
Preliminary study on rotary ultrasonic machining of CFRP/Ti stacks
W. L. Cong et al.
ULTRASONICS (2014)
Preparation and Properties of Cu Matrix Reinforced with Ti2AlN Ceramic Particles
Dandan Zhang et al.
HIGH-PERFORMANCE CERAMICS VIII (2014)
Rotary ultrasonic machining of CFRP/Ti stacks using variable feedrate
W. L. Cong et al.
COMPOSITES PART B-ENGINEERING (2013)
Investigation on the bonding strength patterns of ultrasonic vibration tools and influence on working performance during rotary ultrasonic grinding
Yunfeng Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
An analytical model of rotary ultrasonic milling
Erich Bertsche et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Ultrasonic slot machining of a silicon carbide matrix composite
Erich Bertsche et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Relationship between subsurface damage and surface roughness of glass BK7 in rotary ultrasonic machining and conventional grinding processes
Dongxi Lv et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Mathematical model for cutting force in rotary ultrasonic face milling of brittle materials
Chenglong Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Improvement effects of vibration on cutting force in rotary ultrasonic machining of BK7 glass
Dongxi Lv et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Enhancement of surface quality in ultrasonic machining of glass using a sacrificing coating
Dae Kyun Baek et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
EXPERIMENTAL INVESTIGATIONS ON SUBSURFACE DAMAGE IN ROTARY ULTRASONIC MACHINING OF GLASS BK7
Dongxi Lv et al.
MACHINING SCIENCE AND TECHNOLOGY (2013)
EXPERIMENTAL STUDY ON THE CUTTING FORCE DIFFERENCE BETWEEN ROTARY ULTRASONIC MACHINING AND CONVENTIONAL DIAMOND GRINDING OF K9 GLASS
Chun-Yang Zhao et al.
MACHINING SCIENCE AND TECHNOLOGY (2013)
ULTRASONIC MACHINING-A COMPREHENSIVE REVIEW
Jatinder Kumar
MACHINING SCIENCE AND TECHNOLOGY (2013)
Influences of vibration on surface formation in rotary ultrasonic machining of glass BK7
Dongxi Lv et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)
Influence of cutting parameters on achieved geometric tolerances in rotary ultrasonic drilling of Al2O3
Michaela Samardziova et al.
SENSORS, MEASUREMENT AND INTELLIGENT MATERIALS, PTS 1-4 (2013)
Feasibility study of the rotary ultrasonic elliptical machining of carbon fiber reinforced plastics (CFRP)
Jing Liu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
A cutting force model for rotary ultrasonic machining of brittle materials
DeFu Liu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Rotary ultrasonic machining of carbon fiber-reinforced plastic composites: using cutting fluid vs. cold air as coolant
W. L. Cong et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Rotary Ultrasonic Machining of Alumina Dental Ceramics: A Preliminary Experimental Study on Surface and Subsurface Damages
Yasser Ahmed et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)
Rotary ultrasonic machining of carbon fiber reinforced plastic composites: An experimental study on cutting temperature
W. L. Cong et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
Rotary ultrasonic machining of CFRP: A comparison with twist drilling
W. L. Cong et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012)
ROTARY ULTRASONIC MACHINING OF CARBON FIBER-REINFORCED POLYMER: FEASIBILITY STUDY
Q. Feng et al.
MACHINING SCIENCE AND TECHNOLOGY (2012)
Enabling and Understanding Ultrasonic Machining of Engineering Ceramics Using Parametric Analysis
H. Lalchhuanvela et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
A study on the effect of ultrasonic vibration in nanosecond laser machining
Bongchul Kang et al.
OPTICS AND LASERS IN ENGINEERING (2012)
Surface observations and material removal mechanisms in rotary ultrasonic machining of brittle material
Dongxi Lv et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Rotary ultrasonic-assisted milling of brittle materials
Kuo Kei-lin et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2012)
Rotary ultrasonic machining of CFRP composites: A study on power consumption
W. L. Cong et al.
ULTRASONICS (2012)
Rotary Ultrasonic-assisted Grinding of Ceramic Material
Jingfu Chai et al.
ADVANCED MATERIALS AND PROCESS TECHNOLOGY, PTS 1-3 (2012)
An Experimental Investigation of Ultrasonic Assisted Grinding in DOE Approach
Kyeong-Tae Kim et al.
ADVANCES IN ABRASIVE TECHNOLOGY XV (2012)
Theoretical and experimental research on the features of cutting force in rotary ultrasonic face milling of K9 glass
Chenglong Zhang et al.
MECHATRONICS AND APPLIED MECHANICS, PTS 1 AND 2 (2012)
Optimal Design of an Ultrasonic Transducer in Rotary Ultrasonic Machining
Fanchong Zeng et al.
FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2 (2012)
Experiment Research on Cutting Performance of High Volume Fraction SiCp/Al Composites in Rotary Ultrasonic Machining
Guiqiang Liang et al.
FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2 (2012)
Parameters Optimization of Rotary Ultrasonic Machining of Zirconia Ceramic for Surface Roughness Using Statistical Taguchi's Experimental Design
Basem M. A. Abdo et al.
FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2 (2012)
A Mathematical Model for Predicting Cutting Force in Rotary Ultrasonic Drilling
Chenglong Zhang et al.
MATERIALS SCIENCE AND INFORMATION TECHNOLOGY, PTS 1-8 (2012)
Optimization of correlated multiple responses of ultrasonic machining (USM) process
Susanta Kumar Gauri et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Vibration Amplitude in Rotary Ultrasonic Machining: A Novel Measurement Method and Effects of Process Variables
W. L. Cong et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Dynamic Process Modeling for Rotary Ultrasonic Machining of Alumina
Jiaqing Wu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2011)
Rotary ultrasonic machining of CFRP using cold air as coolant: feasible regions
W. L. Cong et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Study on a Novel Adaptive Force Control Table Employed for Rotary Ultrasonic Drilling
Liping Liu et al.
INFORMATION ENGINEERING FOR MECHANICS AND MATERIALS SCIENCE, PTS 1 AND 2 (2011)
Monitoring of Tool Wear in Rotary Ultrasonic Machining of Advanced Ceramics
Liping Liu et al.
ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3 (2011)
An experimental study on processing performance of rotary ultrasonic drilling of K9 glass
Chenglong Zhang et al.
FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY, PTS 1-3 (2011)
Experimental investigation of rotary ultrasonic face milling of K9 glass
Chenglong Zhang et al.
FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY, PTS 1-3 (2011)
Kinematic view of toot life in rotary ultrasonic side milling of hard and brittle materials
Hu Gong et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Parameter Optimization of Ultrasonic Machining Process Using Nontraditional Optimization Algorithms
Ravipudi Venkata Rao et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Development of a new rotary ultrasonic spindle for precision ultrasonically assisted grinding
Yongbo Wu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Fuzzy Modeling and Simulation of Ultrasonic Drilling of Porcelain Ceramic with Hollow Stainless Steel Tools
Jagdev Singh et al.
MATERIALS AND MANUFACTURING PROCESSES (2009)
Rotary ultrasonic machining of potassium dihydrogen phosphate (KDP) crystal: An experimental investigation on surface roughness
Qiangguo Wang et al.
Journal of Manufacturing Processes (2009)
Laser beam machining - A review
Avanish Kumar Dubey et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Ultrasonic machining of Al2O3/LaPO4 composites
M. Abdul Majeed et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Support vector fuzzy adaptive network in the modeling of material removal rate in rotary ultrasonic machining
Judong Shen et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Design of rotary ultrasonic milling tool using FEM simulation
Kei-Lin Kuo
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
MECHANICAL DRILLING PROCESSES FOR TITANIUM ALLOYS: A LITERATURE REVIEW
P. F. Zhang et al.
MACHINING SCIENCE AND TECHNOLOGY (2008)
Design of horn for rotary ultrasonic machining using the finite element method
Vinod Yadava et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Surface quality evaluation in ultrasonic drilling through the Taguchi technique
A. Dvivedi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Ultrasonic-assisted drilling of Inconel 738-LC
B. Azarhoushang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Edge-chipping reduction in rotary ultrasonic machining of ceramics: Finite element analysis and experimental verification
Z. C. Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Rotary ultrasonic machining of titanium alloy: Effects of machining variables
N. J. Churi et al.
MACHINING SCIENCE AND TECHNOLOGY (2006)
Study on edge chipping in rotary ultrasonic machining of ceramics: An integration of designed experiments and finite element method analysis
Y Jiao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2005)
Experimental observation of tool wear in rotary ultrasonic machining of advanced ceramics
WM Zeng et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Rotary ultrasonic machining of ceramic matrix composites: feasibility study and designed experiments
ZC Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Ultrasonic application in drilling
R Neugebauer et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Modeling of material removal rate in rotary ultrasonic machining: designed experiments
P Hu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Analysis of the rotary ultrasonic machining mechanism
G Ya et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Ultrasonic machining of alumina-based ceramic composites
JX Deng et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2002)
Modeling of material removal in mechanical type advanced machining processes: a state-of-art review
NK Jain et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Precision ultrasonic machining process:: a case study of stress analysis of ceramic (Al2O3)
B Ghahramani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2001)
Share Paper
