☆ 4.0 Article

Properties of Plywood Bonded with Formaldehyde-Free Adhesive Based on Poly(vinyl alcohol)-Tannin-Hexamine at Different Formulations and Cold-Pressing Times

JOURNAL OF COMPOSITES SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Enhancing the performance of natural rubber latex with polymeric isocyanate as cold-pressing and formaldehyde free adhesive for plywood

Muhammad Adly Rahandi Lubis et al.

Summary: A cold-pressing and formaldehyde free adhesive for plywood was prepared by incorporating natural rubber latex (NRL) and poly(vinyl alcohol) (PVA) with polymeric 4,4-diphenyl methane diisocyanate (pMDI). The addition of pMDI improved the curing performance and adhesive strength of the adhesive, while reducing formaldehyde emission.

JOURNAL OF ADHESION (2023)

Add to Collection

Article Materials Science, Paper & Wood

Recent progress in ultra-low formaldehyde emitting adhesive systems and formaldehyde scavengers in wood-based panels: a review

Lubos Kristak et al.

Summary: This article reviews the current research status of low formaldehyde emission wood adhesives and formaldehyde scavengers, and discusses how to manufacture low-toxic, eco-friendly wood composites.

WOOD MATERIAL SCIENCE & ENGINEERING (2023)

Add to Collection

Article Engineering, Chemical

Low curing temperature tannin-based non-isocyanate polyurethane (NIPU) wood adhesives: Preparation and properties evaluation

Xinyi Chen et al.

Summary: The use of bio-sourced GDE as an enhancer in tannin-based NIPU adhesives has been shown to decrease curing temperature, improve bonding performance, and reduce emission of harmful substances, aligning with the requirements for a cleaner production process.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Tannin-based bio-adhesives for the wood panel industry as sustainable alternatives to petrochemical resins

Ana Arias et al.

Summary: This study focuses on five alternatives for tannin-based adhesives, using modeling and simulation tools for conceptual design and life cycle assessment methodology for identifying environmental impacts. The results show that tannin NIPU bio-adhesive has the best environmental profile.

JOURNAL OF INDUSTRIAL ECOLOGY (2022)

Add to Collection

Article Polymer Science

Ambient curable natural rubber latex adhesive cross-linked with polymeric isocyanate for bonding wood

Muhammad Adly Rahandi Lubis et al.

Summary: This study investigated a formaldehyde-free ambient curable adhesive based on natural rubber latex, using poly(vinyl alcohol) and polymeric 4,4-methylene diphenyl diisocyanate as additives. The results indicate that the adhesive with 15% pMDI showed the highest shear strength, making it suitable for manufacturing laminated wood.

POLYMER BULLETIN (2022)

Add to Collection

Article Polymer Science

Influence of Lignin Content and Pressing Time on Plywood Properties Bonded with Cold-Setting Adhesive Based on Poly (Vinyl Alcohol), Lignin, and Hexamine

Muhammad Adly Rahandi Lubis et al.

Summary: The study demonstrated that the addition of 10% and 15% lignin content in the adhesive resulted in better cohesion strength compared to that with 20% lignin content. However, statistical analysis revealed that using 20% lignin in the adhesive and a cold-pressing time of 24 h could produce plywood comparable to control polyurethane resins. This eco-friendly plywood bonded with PVOH-lignin-hexamine-based adhesive using cold pressing showed promising potential as an alternative to conventional plywood production.

POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal and mechanical performance of ramie fibers modified with polyurethane resins derived from acacia mangium bark tannin

Manggar Arum Aristri et al.

Summary: This study aimed to develop a bio-based polyurethane resin derived from tannin and impregnate ramie fibers with the resin. The results showed that impregnation improved the thermal stability and mechanical properties of the fibers, enhancing their comprehensive industrial application as a functional material.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Review Forestry

Bio-Based Polyurethane Resins Derived from Tannin: Source, Synthesis, Characterisation, and Application

Manggar Arum Aristri et al.

Summary: Tannins are soluble, astringent phenolic metabolites obtained from renewable natural resources and used in various industrial applications, including the production of tannin-based bio-polyurethanes to reduce dependency on harmful substances in the manufacturing process. Tannin-based bio-PUs show potential in improving the mechanical and thermal properties of polymer materials.

FORESTS (2021)

Add to Collection

Article Mechanics

Performance properties of plywood composites reinforced with carbon fibers

Radoslaw Auriga et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Barrier properties of cellulose nanofiber film as an external layer of particleboard

Aneta Gumowska et al.

CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Facile Approach for Glutaraldehyde Cross-Linking of PVA/Aluminophosphate Adhesives for Wood-Based Panels

John Tosin Aladejana et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Review Engineering, Environmental

Structural Properties and Copolycondensation Mechanism of Valonea Tannin-Modified Phenol-formaldehyde Resin

Cheng Li et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)

Add to Collection

Article Forestry

Improving soy-based adhesives for wood particleboard by tannins addition

Saman Ghahri et al.

WOOD SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Article Agricultural Engineering

Exterior grade plywood adhesives based on pine bark polyphenols and hexamine

Jorge Santos et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

Add to Collection

Article Agricultural Engineering

Tannins as a sustainable raw material for green chemistry: A review

Younes Shirmohammadli et al.

INDUSTRIAL CROPS AND PRODUCTS (2018)

Add to Collection

Article Materials Science, Paper & Wood

Development and Characterization of a Bayberry Tannin-based Adhesive for Particleboard

Jun Zhang et al.

BIORESOURCES (2017)

Add to Collection

Article Engineering, Chemical

Shear Strength and Durability Testing of Adhesive Bonds in Cross-laminated Timber

Karol S. Sikora et al.

JOURNAL OF ADHESION (2016)

Add to Collection

Article Polymer Science

Synthesis and characterization of advanced biobased thermoplastic nonisocyanate polyurethanes, with controlled aromatic-aliphatic architectures

Camille Carre et al.

EUROPEAN POLYMER JOURNAL (2016)

Add to Collection

Article Agricultural Engineering

Effects of bark extraction before liquefaction and liquid oil fractionation after liquefaction on bark-based phenol formaldehyde resoles

Shanghuan Feng et al.

INDUSTRIAL CROPS AND PRODUCTS (2016)

Add to Collection

Article Materials Science, Paper & Wood

Development of medium- and low-density fibreboards made of coconut husk and bound with tannin-based adhesives

John Fitzken Da Vinci M. Niro et al.

INTERNATIONAL WOOD PRODUCTS JOURNAL (2016)

Add to Collection

Article Forestry

Investigation of a new natural particleboard adhesive composed of tannin and sucrose

Zhongyuan Zhao et al.

JOURNAL OF WOOD SCIENCE (2014)

Add to Collection

Article Engineering, Chemical

Effect of citric acid, PVOH, and starch ratio on the properties of cross-linked poly(vinyl alcohol)/starch adhesives

Waranyou Sridach et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Forestry

Scavengers for achieving zero formaldehyde emission of wood-based panels

Nuno A. Costa et al.

WOOD SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Forestry

Industrial production of pine tannin-bonded particleboard and MDF

J. Valenzuela et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2012)

Add to Collection

Article Engineering, Chemical

Low Formaldehyde Emitting Biobased Wood Adhesives Manufactured from Mixtures of Tannin and Glyoxylated Lignin

P. Navarrete et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2012)

Add to Collection

Article Agricultural Engineering

Extraction of condensed tannins from grape pomace for use as wood adhesives

Lan Ping et al.

INDUSTRIAL CROPS AND PRODUCTS (2011)

Add to Collection

Article Forestry

Characterization of a formaldehyde-free cornstarch-tannin wood adhesive for interior plywood

Amine Moubarik et al.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2010)

Add to Collection

Article Agricultural Engineering

Environment-friendly adhesives for surface bonding of wood-based flooring using natural tannin to reduce formaldehyde and TVOC emission

Sumin Kim

BIORESOURCE TECHNOLOGY (2009)

Add to Collection

Article Engineering, Chemical

Recent developments in eco-efficient bio-based adhesives for wood bonding: opportunities and issues

A. Pizzi

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2006)

Add to Collection

Article Polymer Science

Thermal and mechanical properties of woodflour/tannin adhesive composites

M Mosiewicki et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.