☆ 3.8 Review

A review on waste wood reinforced polymer composites and their processing for construction materials

INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Review Materials Science, Textiles

Tribology of Plant-Based Natural Fiber Reinforced Polymer Matrix Composites - a Short Review

Hiral H. Parikh

Summary: This article focuses on the application and the impact of material and operating parameters on the friction and wear behavior of natural fiber-reinforced composite materials. It also presents different wear mechanisms and principles used in wear test rigs, aiming to showcase the potential of composites as tribo materials and highlight further research directions.

JOURNAL OF NATURAL FIBERS (2023)

Add to Collection

Article Materials Science, Textiles

Analysis of Mechanical Properties of Kenaf and Kapok Fiber Reinforced Hybrid Polyester Composite

Shilpa S. Bhambure et al.

Summary: Natural fiber reinforced hybrid polymer composites have better mechanical properties compared to synthetic fiber composites, and kenaf fiber has shown great potential for technical applications. In this study, the mechanical properties of kenaf and kapok fiber reinforced hybrid polyester composites were investigated. The composite specimens were prepared using a simple hand lay-up technique and tested according to ASTM standards. The results showed that the composite with equal contribution of kenaf and kapok fiber reinforcement exhibited high tensile and impact strength. However, an increase in kapok fiber content led to a decrease in bending strength and bending modulus of the composites. SEM analysis was conducted to examine the fractured surfaces of the specimens.

JOURNAL OF NATURAL FIBERS (2023)

Add to Collection

Article Chemistry, Physical

Effect of Wood Dust Fibre Treatments Reinforcement on the Properties of Recycled Polypropylene Composite (r-WoPPC) Filament for Fused Deposition Modelling (FDM)

Z. A. S. Nafis et al.

Summary: The study examined the effect of wood dust fibre treatment on the properties of wood dust reinforced recycled polypropylene composite (r-WoPPC) filament. The wood dust fibre was treated with alkali, silane, and NaOH-silane. The silane treated wood fibre showed the highest wire pull strength due to enhanced interfacial bonding with recycled PP. The treated filament also exhibited minimal void, gap, and good fibre adhesion, resulting in reduced water absorption and improved mechanical properties.

MATERIALS (2023)

Add to Collection

Review Materials Science, Composites

A review of joining techniques for thermoplastic composite materials

Amna Siddique et al.

Summary: This paper provides a review of the investigations on fiber-reinforced composite joints, including the development level of various types of joints and joining techniques, their advantages and disadvantages. It also briefly describes several parameters affecting the performance of composite joints and provides guidance on joint testing.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

Add to Collection

Review Green & Sustainable Science & Technology

The Devastation of Waste Plastic on the Environment and Remediation Processes: A Critical Review

Katleho Keneuwe Khoaele et al.

Summary: The rapid increase in population has led to devastating effects of plastic waste on the ecosystem. Efforts to mitigate plastic waste have had limited effects due to the increasing demand for plastic. Advancements in recycling plastic are critical for achieving a sustainable circular economy. This study reviews the adverse effects of plastic waste, regulations for managing it, and suggests remedial measures to reduce plastic waste.

SUSTAINABILITY (2023)

Add to Collection

Review Materials Science, Composites

Recent Trends in Treatment and Fabrication of Plant-Based Fiber-Reinforced Epoxy Composite: A Review

Abdullahi Haruna Birniwa et al.

Summary: This study aims to evaluate the most suitable and widely utilized natural fiber-reinforced polymer composites (NFPCs) and their characteristics, including manufacture, processing, and applications. The study also explores various external treatments of natural fibers and their impact on the properties of NFPCs. Additionally, it investigates the effects of fiber supply, type, and structure, as well as different physical and chemical treatments on the thermal and strength properties of NFPCs. The review uncovers the applications of NFPCs in industries such as automotive and research, highlighting the potential for improving their properties through intentional modification of the fibers.

JOURNAL OF COMPOSITES SCIENCE (2023)

Add to Collection

Review Materials Science, Composites

Influence of Natural Fiber Content on the Frictional Material of Brake Pads-A Review

Zeina Ammar et al.

Summary: Research has shown that natural fibers, such as banana peels, palm kernels, and palm slag, have the potential to replace traditional materials in brake pads. This article reviews the literature on the use of different natural fibers in brake pads and their impact on the physical, mechanical, and tribological properties. The recommended formulations for optimum properties are showcased, and the effect of asbestos material and natural fibers on life-cycle assessment and CO2 emission is highlighted.

JOURNAL OF COMPOSITES SCIENCE (2023)

Add to Collection

Review Materials Science, Composites

Review of natural fiber-reinforced engineering plastic composites, their applications in the transportation sector and processing techniques

Vardaan Chauhan et al.

Summary: Interest in natural fiber-reinforced polymer (NFRP) composites is growing rapidly in the transportation sector as a replacement for metals and synthetic fiber composites, due to their low cost, low environmental impact, and equivalent properties to metals and other composites.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)

Add to Collection

Article Materials Science, Textiles

Experimental Investigation on Mechanical and Biodegradation Properties of Indian Almond-Kenaf Fiber-Reinforced Hybrid Composites for Construction Applications

E. Narayanan Nampoothiri et al.

Summary: Tri-layer hybrid composites composed of Indian almond and kenaf fibers were fabricated using the hand layup method. Two types of hybrid composites, K/I/K and I/K/I, were prepared and tested for their mechanical properties and durability. The results showed that the K/I/K composite, with high-strength kenaf fibers as the outer layer, exhibited the highest tensile and flexural strength, while the I/K/I composite, with Indian almond fibers as the outer layer, showed the highest impact strength and moisture absorption rate.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Review Materials Science, Textiles

A review investigating the influence of nanofiller addition on the mechanical, thermal and water absorption properties of cellulosic fibre reinforced polymer composite

Adnan Amjad et al.

Summary: Composite materials hold great potential for future materials, especially natural fiber reinforced polymer composites which offer environmental benefits and cost-effectiveness, but are limited by compatibility issues and high moisture absorption. Surface treatment of natural fibers and addition of nanofillers can enhance the performance of NFRPCs.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

Add to Collection

Article Materials Science, Paper & Wood

Characterization and properties of plywood bioadhesive derived from cottonseed protein and sawdust cellulose

Hangbo Yue et al.

Summary: An environmentally friendly bioadhesive derived from cottonseed meal waste and cellulose sawdust was successfully prepared in this study. It exhibited good bonding strength and thermal stability. The improvements in bonding strength and thermal stability were attributed to the strong chemical bonds and mechanical interlocking formed between the adhesive and the plywood substrates.

CELLULOSE (2022)

Add to Collection

Article Construction & Building Technology

Post-process hot-pressing of wood-polymer composites: Effects on physical properties

Daniel Friedrich

Summary: The study found that temperature has the most significant and strongest impact on physical changes in the manufacturing of wood-plastic composite products. Apart from density, color, wettability, and water absorption are sensitive indicators for production control and respond most sensitively to the process.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Environmental Sciences

Possibility of using municipal solid waste for manufacturing wood-plastic composites: effects of natural weathering, wood waste types, and contents

Chainarong Srivabut et al.

Summary: This study investigated the effects of different types (twigs, leaves, and palm fronds) and contents (40 to 60 wt%) of wood waste on the physical and mechanical properties of plastic bag composites under sea coast climate conditions. The results showed that increasing wood waste content led to a decrease in the strength and hardness of the composites, with twigs-based composites performing better. Therefore, it is recommended to use twigs-based plastic bag composites in construction and building product applications.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Preparation and characterization of green composites based on expanded polystyrene waste and biomass: Sustainable management approach

Vijaya Lakshmi Bollakayala et al.

Summary: In this study, eco-friendly and cost-effective wood-plastic composites were prepared from waste expanded polystyrene (EPS) and biomass (sawdust) using compression moulding process. The effect of raw material quantity, compression moulding pressure, and polymer loading on the properties of the composites was investigated. It was found that increasing the raw material quantity, compression moulding pressure, and polymer loading improved the physico-mechanical properties of the composites, while decreasing the water absorption.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Review Materials Science, Composites

Natural fiber-reinforced composites: A review on material, manufacturing, and machinability

Amirhossein Lotfi et al.

Summary: Interest in NFRCs is rapidly increasing due to their advantages, but large-scale use still presents challenges. This article reviews various aspects of NFRCs, focusing on manufacturing and machinability, discussing challenges, damages, key parameters, and research perspectives.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

One-Step Twin-Screw Extrusion Process to Fibrillate Deep Eutectic Solvent-Treated Wood to Be Used in Wood Fiber-Polypropylene Composites

Hesam Taheri et al.

Summary: This study pretreated wood with a green solvent system to achieve fibrillation of wood fibers through a one-step extrusion process, successfully producing wood fiber-polypropylene composite. The treated wood showed improved performance in the composite, with darker color and increased hydrophobicity.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced mechanical properties, water resistance, thermal stability, and biodegradation of the starch-sisal fibre composites with various fillers

Maocheng Ji et al.

Summary: The addition of inorganic fillers and a bio-filler to starch-sisal fibre composites improved their mechanical properties, water resistance, thermal stability and biodegradation characteristics. Eggshell powder and calcium carbonate showed the most positive effects, with eggshell powder offering optimal cushioning and biodegradation performance.

MATERIALS & DESIGN (2021)

Add to Collection

Article Polymer Science

Effect of Fibre Surface Treatment and Nanofiller Addition on the Mechanical Properties of Flax/PLA Fibre Reinforced Epoxy Hybrid Nanocomposite

Adnan Amjad et al.

Summary: Natural fibre reinforced polymer composites are increasingly popular in automotive applications, with the addition of Al2O3 and MgO nanofillers showing significant improvements in mechanical properties. Surface treatment of fibres and nanofiller addition play crucial roles in enhancing the overall performance of the composites, demonstrating superior tensile, flexural, and impact properties in the hybrid nanocomposites. The SEM images reveal various defects that impact the mechanical behavior of the composites, highlighting the importance of optimizing the composition for enhanced performance.

POLYMERS (2021)

Add to Collection

Article Polymer Science

Effects of Coupling Agent and Thermoplastic on the Interfacial Bond Strength and the Mechanical Properties of Oriented Wood Strand-Thermoplastic Composites

Ziling Shen et al.

Summary: The study found that using MDI as a coupling agent can improve the interfacial bond strength between wood and thermoplastics, enhancing mechanical properties. Better interfacial bonding between plastic and wood can improve the performance of composite materials.

POLYMERS (2021)

Add to Collection

Article Materials Science, Composites

Mechanical, microstructure, and dynamic mechanical analysis of nano-shell and plant fiber hybrid biocomposite

O. J. Gbadeyan et al.

Summary: The study found that loading banana fiber can improve the mechanical properties of the biocomposite, but has a negative impact on temperature-dependent properties. The loading of nano-CaCO3 can enhance the performance of banana-filled biocomposites, with the hybrid composite containing 2wt% showing superior properties.Uniform dispersion and strong adhesion between the matrix/nano-CaCO3/banana fiber contribute to the improved mechanical and temperature-dependent properties.

JOURNAL OF COMPOSITE MATERIALS (2021)

Add to Collection

Article Materials Science, Composites

Injection Molding of Wood-Filled Thermoplastic Polyurethane

Elmar Moritzer et al.

Summary: This research investigates the optimization of mechanical properties of wood fiber reinforced thermoplastic polyurethanes and reveals that mechanical properties significantly depend on temperature control and fiber type.

JOURNAL OF COMPOSITES SCIENCE (2021)

Add to Collection

Review Environmental Sciences

Plastic waste: Status, degradation and microbial management options for Africa

Otobong Donald Akan et al.

Summary: The paper reviews the profile of synthetic polymer wastes in Africa, highlighting the current management status and challenges. It shows that the volume of plastic wastes in Africa is directly linked to the increasing population, but the current treatment options have major drawbacks. Ineffective regulations, poor monitoring, and slow adoption of veritable practices by governments have led to the steady increase in plastic volume in African landscapes and environments.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Add to Collection

Article Polymer Science

Properties of Wood-Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets

Geeta Pokhrel et al.

Summary: This study investigates the properties of WPCs made from wood flour and wood pellets, showing that composite products from wood pellets have higher density but lower tensile strength, tensile modulus, and impact strength compared to those made from wood flour. Flexural properties of composites made with pellets were higher without MAPP, but lower with it. Overall, the mechanical property differences between the two were low (0.5-10%) depending on the specific WPC formulations. Statistical analysis indicated no significant differences in material properties between composites made from wood flour and wood pellets, with some situations showing better WPC properties using wood pellets.

POLYMERS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Treatments of natural fiber as reinforcement in polymer composites-a short review

N. M. Nurazzi et al.

Summary: Research has shown that natural fibers have great potential in the composite materials industry, but require proper treatment to enhance performance, and a balance between cost-effectiveness, environmental impacts, and desired performance is needed in design. However, natural fibers still face challenges such as incompatibility with polymer matrix and moisture absorption.

FUNCTIONAL COMPOSITES AND STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Effect of surface treatments on interfacial properties of natural intralaminar hybrid composites

Rosemere de Araujo Alves Lima et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Production of wood-plastic composites using cedrela odorata sawdust waste and recycled thermoplastics mixture from post-consumer products - A sustainable approach for cleaner production in Cuba

Yonny Martinez Lopez et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Environmental Sciences

Are biodegradable plastics a promising solution to solve the global plastic pollution?

Maocai Shen et al.

ENVIRONMENTAL POLLUTION (2020)

Add to Collection

Review Engineering, Environmental

Challenges of plastic waste generation and management in sub-Saharan Africa: A review

Olusola Olaitan Ayeleru et al.

WASTE MANAGEMENT (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

An overview: Natural fiber reinforced hybrid composites, chemical treatments and application areas

N. Karthi et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Engineering, Environmental

Recycling of sisal fiber reinforced polypropylene and polylactic acid composites: Thermo-mechanical properties, morphology, and water absorption behavior

Chakaphan Ngaowthong et al.

WASTE MANAGEMENT (2019)

Add to Collection

Article Engineering, Multidisciplinary

Simple manufacturing method for a thermoplastic composite using PP-Straw

Seong-Baek Yang et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Proceedings Paper Architecture

Wood - Polymer Composites as an Alternative to the Natural Environment

Elzbieta Stanaszek-Tomal

4TH WORLD MULTIDISCIPLINARY CIVIL ENGINEERING-ARCHITECTURE-URBAN PLANNING SYMPOSIUM - WMCAUS (2019)

Add to Collection

Review Green & Sustainable Science & Technology

Industrial applications of natural fibre-reinforced polymer composites - challenges and opportunities

Rajiv Kumar et al.

INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING (2019)

Add to Collection

Review Green & Sustainable Science & Technology

A review on new bio-based constituents for natural fiber-polymer composites

Taneli Vaisanen et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Review Engineering, Manufacturing

A review of recent developments in natural fibre composites and their mechanical performance

K. L. Pickering et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Article Polymer Science

Novel biocomposites based on wheat gluten and rubber wood sawdust

Munlika Bootklad et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Wood polymer composites and their contribution to cascading utilisation

Laura Teuber et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Review Engineering, Manufacturing

A review of the recent developments in biocomposites based on natural fibres and their application perspectives

T. Gurunathan et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

Add to Collection

Article Materials Science, Composites

Effect of processing parameters on the properties of polypropylene-sawdust composites

Lucas Pereira dos Santos et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

Add to Collection

Article Materials Science, Composites

The use of polypropylene in bamboo fibre composites and their mechanical properties - A review

Idowu D. Ibrahim et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015)

Add to Collection

Review Polymer Science

A Review on Natural Fiber Reinforced Polymer Composite and Its Applications

Layth Mohammed et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2015)

Add to Collection

Article Forestry

Wood-Plastic Composite Technology

Douglas J. Gardner et al.

CURRENT FORESTRY REPORTS (2015)

Add to Collection

Article Engineering, Manufacturing

Effects of hemicellulose extraction on properties of wood flour and wood-plastic composites

Omid Hosseinaei et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

Add to Collection

Article Chemistry, Applied

Preparation and foaming extrusion behavior of polylactide acid/polybutylene succinate/montmorillonoid nanocomposite

Pengcheng Ma et al.

JOURNAL OF CELLULAR PLASTICS (2012)

Add to Collection

Review Polymer Science

Biocomposites reinforced with natural fibers: 2000-2010

Omar Faruk et al.

PROGRESS IN POLYMER SCIENCE (2012)

Add to Collection

Article Engineering, Manufacturing

Study on the properties of nanocomposite based on high density polyethylene, polypropylene, polyvinyl chloride and wood

B. K. Deka et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

Add to Collection

Editorial Material Environmental Sciences

What is a Global Environmental Pollution Problem?

J. T. Trevors

WATER AIR AND SOIL POLLUTION (2010)

Add to Collection

Review Agricultural Engineering

Wood-plastic composites as promising green-composites for automotive industries!

Alireza Ashori

BIORESOURCE TECHNOLOGY (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.