Related references
Note: Only part of the references are listed.Comparison of One-Part and Two-Part Alkali-Activated Metakaolin and Blast Furnace Slag
Isabel Pol Segura et al.
JOURNAL OF SUSTAINABLE METALLURGY (2022)
Study of cure conditions effect on the properties of wood biomass fly ash geopolymers
A. De Rossi et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Calcined Clay as Supplementary Cementitious Material
Roman Jaskulski et al.
MATERIALS (2020)
Evaluation of Alternative Home-Produced Concrete Strength with Economic Analysis
Muhammad Rauf Shaker et al.
SUSTAINABILITY (2020)
Hardening evolution of geopolymers from setting to equilibrium: A review
Navid Ranjbar et al.
CEMENT & CONCRETE COMPOSITES (2020)
A review on alkali-activated binders: Materials composition and fresh properties of concrete
Md Manjur A. Elahi et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mechanochemical activation of natural clay minerals: an alternative to produce sustainable cementitious binders - review
Ilda Tole et al.
MINERALOGY AND PETROLOGY (2019)
Mechanical properties and microstructure analysis of FA-GGBS-HMNS based geopolymer concrete
Aissa Bouaissi et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Investigation on grinding impact of fly ash particles and its characterization analysis in cement mortar composites
L. Krishnaraj et al.
AIN SHAMS ENGINEERING JOURNAL (2019)
Hybrid binders: A journey from the past to a sustainable future (opus caementicium futurum)
A. Palomo et al.
CEMENT AND CONCRETE RESEARCH (2019)
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Biranchi Panda et al.
COMPOSITES PART B-ENGINEERING (2019)
Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology
Bashar S. Mohammed et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Efficiency of Different Superplasticizers and Retarders on Properties of 'One-Part' Fly Ash-Slag Blended Geopolymers with Different Activators
Shin Hau Bong et al.
MATERIALS (2019)
A review on mixture design methods for geopolymer concrete
Ning Li et al.
COMPOSITES PART B-ENGINEERING (2019)
Techno-economic analysis of geopolymer production from the coal fly ash with high iron oxide and calcium oxide contents
Siming You et al.
JOURNAL OF HAZARDOUS MATERIALS (2019)
Mechanical and microstructural properties of high calcium fly ash one-part geopolymer cement made with granular activator
Bashar S. Mohammed et al.
HELIYON (2019)
Properties of high-calcium and low-calcium fly ash combination geopolymer mortar containing recycled aggregate
Peem Nuaklong et al.
HELIYON (2019)
Mix Design and Mechanical Properties of Fly Ash and GGBFS-Synthesized Alkali-Activated Concrete (AAC)
Ramamohana Reddy Bellum et al.
INFRASTRUCTURES (2019)
Extrusion-Based Additive Manufacturing of Concrete Products: Revolutionizing and Remodeling the Construction Industry
Marco Valente et al.
JOURNAL OF COMPOSITES SCIENCE (2019)
Hot-pressed geopolymer: Dual effects of heat and curing time
Navid Ranjbar et al.
CEMENT & CONCRETE COMPOSITES (2018)
Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry
Karen L. Scrivener et al.
CEMENT AND CONCRETE RESEARCH (2018)
One-part alkali-activated materials: A review
Tero Luukkonen et al.
CEMENT AND CONCRETE RESEARCH (2018)
Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature
Guohao Fang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
One-part geopolymer cement from slag and pretreated paper sludge
Elijah Adesanya et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Particle-bed 3D printing in concrete construction - Possibilities and challenges
Dirk Lowke et al.
CEMENT AND CONCRETE RESEARCH (2018)
Life cycle assessment of geopolymer concrete
Daniel A. Salas et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Biranchi Panda et al.
CEMENT & CONCRETE COMPOSITES (2018)
Alkali-activated materials
John L. Provis
CEMENT AND CONCRETE RESEARCH (2018)
Calcined clay limestone cements (LC3)
Karen Scrivener et al.
CEMENT AND CONCRETE RESEARCH (2018)
Compressive strength and microstructure of assorted wastes incorporated geopolymer mortars: Effect of solution molarity
Ghasan Fahim Huseien et al.
ALEXANDRIA ENGINEERING JOURNAL (2018)
Methods of curing geopolymer concrete: A review
Muhd Fadhil Nurruddin et al.
INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES (2018)
Evaluation of the potential improvement in the environmental footprint of geopolymers using waste-derived activators
Ana Passuello et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Global distribution of clay-size minerals on land surface for biogeochemical and climatological studies
Akihiko Ito et al.
SCIENTIFIC DATA (2017)
The wear pattern in high pressure grinding rolls
Reza Kazerani Nejad et al.
TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2017)
Hot-pressed geopolymer
Navid Ranjbar et al.
CEMENT AND CONCRETE RESEARCH (2017)
Pozzolanic reactivity of kaolin clays, a review
H. Yanguatin et al.
REVISTA INGENIERIA DE CONSTRUCCION (2017)
Properties of concrete modified with mineral additives
Dzigita Nagrockiene et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete
Pradip Nath et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Pozzolanic reactivity of pure calcined clays
Sofie Hollanders et al.
APPLIED CLAY SCIENCE (2016)
Impact of chemical variability of ground granulated blast-furnace slag on the phase formation in alkali-activated slag pastes
Kai Gong et al.
CEMENT AND CONCRETE RESEARCH (2016)
A Review on the Durability of Alkali-Activated Fly Ash/Slag Systems: Advances, Issues, and Perspectives
Kamel Arbi et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
A mix design procedure for geopolymer concrete with fly ash
P. Pavithra et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Co-disposal of MSWI fly ash and Bayer red mud using an one-part geopolymeric system
Nan Ye et al.
JOURNAL OF HAZARDOUS MATERIALS (2016)
Nanoscale Charge-Balancing Mechanism in Alkali-Substituted Calcium-Silicate-Hydrate Gels
V. Ongun Ozcelik et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)
Hydration of Hybrid Alkaline Cement Containing a Very Large Proportion of Fly Ash: A Descriptive Model
Ines Garcia-Lodeiro et al.
MATERIALS (2016)
Assessment of waste preheater gas and dust bypass systems: Al-Muthanna cement plant case study
N. A. Madlool
CASE STUDIES IN THERMAL ENGINEERING (2016)
A review of alternative approaches to the reduction of CO2 emissions associated with the manufacture of the binder phase in concrete
Ellis Gartner et al.
CEMENT AND CONCRETE RESEARCH (2015)
Comparing carbon emissions of precast and cast-in-situ construction methods - A case study of high-rise private building
Ya Hong Dong et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation
M. Torres-Carrasco et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Optimization of a fully air-swept dry grinding cement raw meal ball mill closed circuit capacity with the aid of simulation
O. Genc
MINERALS ENGINEERING (2015)
One-Part Geopolymers Based on Thermally Treated Red Mud/NaOH Blends
Xinyuan Ke et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)
Synthesis, characterization and mechanisms of one-part geopolymeric cement by calcining low-quality kaolin with alkali
Mei Xun Peng et al.
MATERIALS AND STRUCTURES (2015)
Content and Distribution of Trace Elements and Polycyclic Aromatic Hydrocarbons in Fly Ash from a Coal-Fired CHP Plant
Hui Li et al.
AEROSOL AND AIR QUALITY RESEARCH (2014)
Geopolymers and Related Alkali-Activated Materials
John L. Provis et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 44 (2014)
Characterization of natural pozzolan-based geopolymeric binders
Juhyuk Moon et al.
CEMENT & CONCRETE COMPOSITES (2014)
Use of glass waste as an activator in the preparation of alkali-activated slag. Mechanical strength and paste characterisation
F. Puertas et al.
CEMENT AND CONCRETE RESEARCH (2014)
Geopolymer mortars based on a low grade metakaolin: Effects of the chemical composition, temperature and aggregate:binder ratio
Raul Arellano-Aguilar et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
Pradip Nath et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Minimising the global warming potential of clay based geopolymers
Andrew Heath et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Kaolin-based geopolymers: Effect of mechanical activation and curing process
Ayi D. Hounsi et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
The potential for using geopolymer concrete in the UK
Andrew Heath et al.
PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CONSTRUCTION MATERIALS (2013)
Kaolinitic calcined clays: Factors affecting its performance as pozzolans
Alejandra Tironi et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Thermal Activation of Albite for the Synthesis of One-Part Mix Geopolymers
Dingwu Feng et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2012)
Technical and commercial progress in the adoption of geopolymer cement
Jannie S. J. van Deventer et al.
MINERALS ENGINEERING (2012)
The new european standard on common cements specifications EN 197-1:2011
M. A. Sanjuan et al.
MATERIALES DE CONSTRUCCION (2012)
Mix design and fresh properties for high-performance printing concrete
T. T. Le et al.
MATERIALS AND STRUCTURES (2012)
Leaching kinetics of iron from low grade kaolin by oxalic acid solutions
A. Martinez-Luevanos et al.
APPLIED CLAY SCIENCE (2011)
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
Benjamin C. McLellan et al.
JOURNAL OF CLEANER PRODUCTION (2011)
An environmental evaluation of geopolymer based concrete production: reviewing current research trends
G. Habert et al.
JOURNAL OF CLEANER PRODUCTION (2011)
A model for the C-A-S-H gel formed in alkali-activated slag cements
F. Puertas et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2011)
Properties of geopolymer with seeded fly ash and rice husk bark ash
Ali Nazari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Influence of quartz particles on wear in vertical roller mills. Part I: Quartz concentration
Lucas R. D. Jensen et al.
MINERALS ENGINEERING (2010)
The suitability of thermally activated illite/smectite clay as raw material for geopolymer binders
A. Buchwald et al.
APPLIED CLAY SCIENCE (2009)
Horizontal roller mill (Horomill®) application versus hybrid HPGR/ball milling in finish grinding of cement
Oe. Genc et al.
MINERALS ENGINEERING (2009)
Sustainable construction aspects of using prefabrication in dense urban environment: a Hong Kong case study
Lara Jaillon et al.
CONSTRUCTION MANAGEMENT AND ECONOMICS (2008)
Geopolymer technology:: the current state of the art
P. Duxson et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Carbon dioxide emissions and climate change: policy implications for the cement industry
R Rehan et al.
ENVIRONMENTAL SCIENCE & POLICY (2005)
Industrially interesting approaches to low-CO2 cements
E Gartner
CEMENT AND CONCRETE RESEARCH (2004)
Concrete mixing methods and concrete mixers: State of the art
CF Ferraris
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (2001)
Share Paper
