Related references
Note: Only part of the references are listed.Inverter-Induced Bearing Currents A THOROUGH STUDY OF THE CAUSE-AND-EFFECT CHAINS
Marco T. A. Evo et al.
IEEE INDUSTRY APPLICATIONS MAGAZINE (2023)
Mathematical Design and Analysis of Three-Phase Inverters: Different Wide Bandgap Semiconductor Technologies and DC-Link Capacitor Selection
Kotb B. Tawfiq et al.
MATHEMATICS (2023)
A New Three-Phase Inverter Topology for Reducing the dv/dt and Peak-to-Peak Value of Common Mode Voltage
Arpan Hota et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)
Bearing Fault Detection for Doubly fed Induction Generator Based on Stator Current
Hong Tang et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)
Construction of Synchronous Reluctance Machines With Combined Star-Pentagon Configuration Using Standard Three-Phase Stator Frames
Kotb B. Tawfiq et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2022)
Design of a Modified Single-Stage and Multistage EMI Filter to Attenuate Common-Mode and Differential-Mode Noises in SiC Inverter
Manish Kumar et al.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2022)
A New H8 Inverter Topology With Low Common Mode Voltage and Phase Current THD for 3-φ Induction Motor Drive Applications
Arpan Hota et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2022)
EDM Damage Assessment and Lifetime Prediction of Motor Bearings Driven by PWM Inverters
Ryan Collin et al.
2022 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE) (2022)
A Review of Modeling and Mitigation Techniques for Bearing Currents in Electrical Machines With Variable-Frequency Drives
Wenjun Zhu et al.
IEEE ACCESS (2022)
Shaft Voltage Elimination Method to Reduce Bearing Faults in Dual Three-Phase Motor
Jun-Hyuk Im et al.
IEEE ACCESS (2022)
Sawtooth Carrier-Based PWM Methods With Common-Mode Voltage Reduction for Symmetrical Multiphase Two-Level Inverters With Odd Phase Number
Zicheng Liu et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)
Mathematical Modelling, Analysis and Control of a Three to Five-Phase Matrix Converter for Minimal Switching Losses
Kotb B. Tawfiq et al.
MATHEMATICS (2021)
Common-Mode Voltage Reduction and Fault-Tolerant Operation of Four-Leg CSI-Fed Motor Drives
Yang Xu et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)
A Modified 2-level Three-Phase Inverter Topology with Common Mode Voltage Performance of a 3-level Inverter
Arpan Hota et al.
2021 INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY AND FUTURE ELECTRIC TRANSPORTATION (SEFET) (2021)
Common-Mode Voltage Mitigation of Dual Three-Phase Voltage Source Inverters in a Motor Drive Application
Abraham Marquez et al.
IEEE ACCESS (2021)
Modified Slot Opening for Reducing Shaft-to-Frame Voltage of AC Motors
Manje Yea et al.
ENERGIES (2020)
Electrostatic shielding for bearings discharge currents attenuation: analysis of its effectiveness, losses and impact on the motor performance - a study for design guidelines
Marco Tulio Alves Evo et al.
IET ELECTRIC POWER APPLICATIONS (2020)
Electrical bearing failures in electric vehicles
Feng He et al.
FRICTION (2020)
Simultaneous DC Current Balance and CMV Reduction for Parallel CSC System With Interleaved Carrier-Based SPWM
Li Ding et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)
Reducing Common-Mode Voltage and Bearing Currents in Quasi-Resonant DC-Link Inverter
Marek Turzynski et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)
Modulation Techniques for a Modified Three-Phase Quasi-Switched Boost Inverter With Common-Mode Voltage Reduction
Truong-Duy Duong et al.
IEEE ACCESS (2020)
An Improved Model for Circulating Bearing Currents in Inverter-Fed AC Machines
Michael Jaritz et al.
2019 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT) (2019)
A Switched-Capacitor-Voltage-Doubler Based Boost Inverter for Common-Mode Voltage Reduction
Tan-Tai Iran et al.
IEEE ACCESS (2019)
Design of Low-Inductance Switching Power Cell for GaN HEMT Based Inverter
Emre Gurpinar et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2018)
A Comprehensive Study on Shaft Voltages and Bearing Currents in Rotating Machines
Thibaud Plazenet et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2018)
Electromagnetic interference modeling and suppression techniques in variable-frequency drive systems
Le Yang et al.
FRONTIERS OF MECHANICAL ENGINEERING (2018)
Monitoring Journal-Bearing Faults
Junyeong Jung et al.
IEEE INDUSTRY APPLICATIONS MAGAZINE (2017)
Mitigation Method of the Shaft Voltage According to Parasitic Capacitance of the PMSM
Jun-kyu Park et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2017)
Grounding Concept and Common-Mode Filter Design Methodology for Transformerless MV Drives to Prevent Bearing Current Issues
Marius Mechlinski et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2017)
New Three-Dimensional Space Vector-Based Switching Signal Generation Technique Without Null Vectors and With Reduced Switching Losses for a Grid-Connected Four-Leg Inverter
Heli Golwala et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2016)
Four-Leg Current-Source Inverter With a New Space Vector Modulation for Common-Mode Voltage Suppression
Xiaoqiang Guo et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)
Bearing Currents and Shaft Voltage Reduction in Dual-Inverter-Fed Open-End Winding Induction Motor With Reduced CMV PWM Methods
J. Kalaiselvi et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)
Suppression for Discharging Bearing Current in Variable-Frequency Motors Based on Electromagnetic Shielding Slot Wedge
Baodong Bai et al.
IEEE TRANSACTIONS ON MAGNETICS (2015)
A Universal High-Frequency Three-Phase Electric-Motor Model Suitable for the Delta-and Star-Winding Connections
Gregor Vidmar et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)
High-Frequency Induction Machine Modeling for Common Mode Current and Bearing Voltage Calculation
Oliver Magdun et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2014)
Study of the Further Reduction of Shaft Voltage of Brushless DC Motor With Insulated Rotor Driven by PWM Inverter
Yoshinori Isomura et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2014)
Optimization of Magnetic Flux-path Design for Reduction of Shaft Voltage in IPM-Type BLDC Motor
Kyung-Tae Kim et al.
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY (2014)
Suppressing Bearing Voltage in an Inverter-Fed Ungrounded Brushless DC Motor
Tatsuo Maetani et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2013)
Modelling an AC motor with high accuracy in a wide frequency range
Kelin Jia et al.
IET ELECTRIC POWER APPLICATIONS (2013)
Influence of Motor Operating Parameters on Discharge Bearing Current Activity
Annette Muetze et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2011)
Radio-frequency-based detection of electrical discharge machining bearing currents
J. Ahola et al.
IET ELECTRIC POWER APPLICATIONS (2011)
Identification and Discussion of the Origin of a Shaft End-to-End Voltage in an Inverter-Driven Motor
Umar Tabrez Shami et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2010)
Current-Carrying Characteristics of Conductive Microfiber Electrical Contact for High Frequencies and Current Amplitudes: Theory and Applications
Annette Muetze et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2010)
Identification of the Parameters of the High-Frequency Equivalent Circuit of PM Synchronous Motor Based on Genetic Algorithm
Kouhei Ito et al.
ELECTRICAL ENGINEERING IN JAPAN (2009)
Performance Analysis of Reduced Common-Mode Voltage PWM Methods and Comparison With Standard PWM Methods for Three-Phase Voltage-Source Inverters
Ahmet M. Hava et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2009)
Application of static charge dissipation to mitigate electric discharge bearing currents
Annette Muetze et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2008)
Practical rules for assessment of inverter-induced bearing currents in inverter-fed AC motors up to 500 kW
Annette Muetze et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2007)
Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems
Annette Muetze et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2007)
Experimental high-frequency parameter identification of AC electrical motors
Aldo Boglietti et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2007)
Calculation of circulating bearing currents in machines of inverter-based drive systems
Annette Muetze et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2007)
A passive EMI filter for eliminating both bearing current and ground leakage current from an inverter-driven motor
Hirofumi Akagi et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS (2006)
Cancellation of common-mode voltages for induction motor drives using active method
Chenggang Mei et al.
IEEE TRANSACTIONS ON ENERGY CONVERSION (2006)
High frequency PM synchronous motor model determined by FE analysis
OA Mohammed et al.
IEEE TRANSACTIONS ON MAGNETICS (2006)
An active EMI filtering technique for improving passive filter low-frequency performance
WJ Chen et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY (2006)
Bearing current remediation options
RF Schiferl et al.
IEEE INDUSTRY APPLICATIONS MAGAZINE (2004)
Detecting motor bearing faults
MJ Devaney et al.
IEEE INSTRUMENTATION & MEASUREMENT MAGAZINE (2004)
Optimal common-mode voltage reduction PWM technique for inverter control with consideration of the dead-time effects - Part II: Applications to IM drives with diode front end
YS Lai et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2004)
Circuit model for shaft voltage prediction in induction motors fed by PWM-based AC drives
R Naik et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2003)
Use of extra degrees of freedom in multilevel drives
A BenAbdelghani et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2002)
Motor shaft voltages and bearing currents and their reduction in multilevel medium-voltage PWM voltage-source-inverter drive applications
F Wang
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2000)